Indexable Inserts

Indexable inserts from Kennametal come in a range of shapes and geometries for several holemaking applications. Choose from specially designed high-precision inserts for better chip control while machining difficult materials to combination tool inserts that are perfect for chamfering and spot-facing in one operation. Kennametal's indexable inserts offer a wide range of options for machining at optimal performance.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (602)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(599)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(599)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(600)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(600)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(599)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(574)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(562)
    • M Stainless Steel (560)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(560)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(560)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(536)
    • K Cast Iron (553)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(553)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(553)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(553)
    • N Non-Ferrous Materials (466)
      • N1
        Wrought Aluminum (465)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(463)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(297)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (439)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (452)
      • N6
        Carbon, Graphite Composites, CFRP (411)
      • N7
        MMC's (259)
    • S High-Temp Alloys (514)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(502)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(502)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(514)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(514)
    • H Hardened Materials (123)
      • H1
        Hardened Materials 44-48 HRC(123)
      • H2
        Hardened Materials 48-55 HRC(50)
      • H3
        Hardened Materials 56-60 HRC(36)
      • H4
        Hardened Materials >60 HRC(36)
    • C CFRP Materials (30)
      • C1
        CFRP, CFRP / CFRP (14)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (16)
    Select First Choice
    • BR (55)
    • CN (231)
    • DE (231)
    • GB (164)
    • IN (124)
    • SG (160)
    • US (234)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (55)
    • Interrupted (226)
    • Lightly Interrupted Cut (76)
    • Smooth Cut (191)
    • Stable (332)
    • Unstable (262)
    • Varying Depth of Cut (103)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (12)
    • 1.0 (26)
    • 2.0 (244)
    • 3.0 (163)
    • 4.0 (182)
    • 8.0 (65)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.002 in(2)
    • 0.004 in(9)
    • 0.008 in(58)
    • 0.016 in(217)
    • 0.024 in(6)
    • 0.031 in(244)
    • 0.034 in(9)
    • 0.039 in(23)
    • 0.047 in(68)
    • 0.063 in(15)
    • 0.079 in(9)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(2)
    • 0.1 mm(9)
    • 0.2 mm(58)
    • 0.4 mm(217)
    • 0.601 mm(6)
    • 0.8 mm(244)
    • 0.851 mm(9)
    • 1.0 mm(23)
    • 1.201 mm(68)
    • 1.6 mm(15)
    • 2.0 mm(9)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CS5 (11)
    • K313 (16)
    • K68 (2)
    • KC5010 (75)
    • KC5025 (32)
    • KC5410 (14)
    • KC7015 (6)
    • KC7140 (66)
    • KC720 (8)
    • KC7215 (38)
    • KC7225 (1)
    • KC730 (12)
    • KC7315 (14)
    • KCK05 (3)
    • KCK05B (1)
    • KCK15B (4)
    • KCMS35 (18)
    • KCP05 (4)
    • KCP10 (6)
    • KCP10B (6)
    • KCP25 (6)
    • KCP25B (5)
    • KCPK10 (40)
    • KCU10 (14)
    • KCU25 (112)
    • KCU40 (119)
    • KD1425 (6)
    • KM1 (7)
    • KMF (11)
    • KT315 (33)
    • KT325 (2)
    Wiper Insert
    Wiper Insert
    • N (658)
    • Y (34)
    Countersunk Angle
    Countersunk Angle
    • 30.0 (4)
    • 41.0 (4)
    • 45.0 (18)
    Countersunk Angle MintoCountersunk Angle Max
    Front-End
    Cutting Width
    Cutting Width
    • 0.228 in(1)
    • 0.24 in(1)
    • 0.386 in(2)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 5.801 mm(1)
    • 6.101 mm(1)
    • 9.8 mm(2)
    Cutting Width MintoCutting Width Max
    Insert Shape
    Insert Shape
    • B-PARALLELOGRAM 82 (34)
    • C-DIAMOND/RHOMBIC 80 (243)
    • COUNTERBORE/COUNTERSINK MISC (32)
    • D-DIAMOND/RHOMBIC 90 (30)
    • S-SQUARE 90 (185)
    • T-TRIANGLE 60 (12)
    • X-TRIGON 84 (156)
    Insert Geometry
    Shape
    Shape
    • B-PARALLELOGRAM 82 (34)
    • C-DIAMOND/RHOMBIC 80 (243)
    • COUNTERBORE/COUNTERSINK MISC (32)
    • D-DIAMOND/RHOMBIC 90 (30)
    • S-SQUARE 90 (185)
    • T-TRIANGLE 60 (12)
    • X-TRIGON 84 (156)
    Insert IC Size
    Insert IC Size
    • 5.0 mm(7)
    • 5.426 mm(2)
    • 5.551 mm(13)
    • 6.0 mm(47)
    • 6.351 mm(81)
    • 7.801 mm(2)
    • 7.926 mm(16)
    • 7.95 mm(24)
    • 8.0 mm(41)
    • 9.525 mm(111)
    • 10.0 mm(33)
    • 12.0 mm(27)
    • 12.701 mm(152)
    • 15.0 mm(25)
    • 15.726 mm(22)
    • 15.875 mm(13)
    • 17.6 mm(9)
    • 19.05 mm(4)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.197 in(7)
    • 0.214 in(2)
    • 0.219 in(13)
    • 0.237 in(47)
    • 0.25 in(81)
    • 0.307 in(2)
    • 0.312 in(16)
    • 0.313 in(24)
    • 0.315 in(41)
    • 0.375 in(111)
    • 0.394 in(33)
    • 0.473 in(27)
    • 0.5 in(152)
    • 0.591 in(25)
    • 0.619 in(22)
    • 0.625 in(13)
    • 0.694 in(9)
    • 0.75 in(4)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 3.301 mm(7)
    • 3.975 mm(28)
    • 5.2 mm(1)
    • 5.301 mm(26)
    • 5.426 mm(8)
    • 5.65 mm(4)
    • 6.2 mm(12)
    • 6.351 mm(13)
    • 6.45 mm(46)
    • 6.476 mm(7)
    • 6.525 mm(1)
    • 6.625 mm(32)
    • 7.801 mm(17)
    • 7.851 mm(1)
    • 7.926 mm(22)
    • 7.95 mm(26)
    • 9.375 mm(22)
    • 9.525 mm(20)
    • 9.625 mm(3)
    • 9.675 mm(66)
    • 9.826 mm(1)
    • 9.925 mm(24)
    • 11.0 mm(3)
    • 11.525 mm(1)
    • 11.625 mm(4)
    • 11.65 mm(4)
    • 12.55 mm(16)
    • 12.701 mm(33)
    • 12.9 mm(112)
    • 13.75 mm(3)
    • 15.726 mm(22)
    • 16.125 mm(4)
    • 16.5 mm(3)
    • 19.35 mm(4)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.13 in(7)
    • 0.156 in(28)
    • 0.206 in(1)
    • 0.209 in(26)
    • 0.214 in(8)
    • 0.222 in(4)
    • 0.244 in(12)
    • 0.25 in(13)
    • 0.254 in(46)
    • 0.255 in(7)
    • 0.257 in(1)
    • 0.261 in(32)
    • 0.307 in(17)
    • 0.309 in(1)
    • 0.312 in(22)
    • 0.313 in(26)
    • 0.369 in(22)
    • 0.375 in(20)
    • 0.379 in(3)
    • 0.381 in(66)
    • 0.387 in(1)
    • 0.391 in(24)
    • 0.433 in(3)
    • 0.454 in(1)
    • 0.458 in(4)
    • 0.459 in(4)
    • 0.494 in(16)
    • 0.5 in(33)
    • 0.508 in(112)
    • 0.541 in(3)
    • 0.619 in(22)
    • 0.635 in(4)
    • 0.65 in(3)
    • 0.762 in(4)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 11 (5)
    • 20 (33)
    • 21 (30)
    • 22 (4)
    • DS (34)
    • FF (3)
    • FN (29)
    • FP (31)
    • FW (16)
    • GD (49)
    • HD (4)
    • HP (152)
    • HPF (5)
    • LD (13)
    • LF (71)
    • LP (12)
    • MD (89)
    • MP (7)
    • MW (18)
    • RP (9)
    • UF (4)
    Cutting Tool Material
    Cutting Tool Material
    • D P (6)
    • H T (34)
    • H W (652)
    Tolerance Class
    Tolerance Class
    • G (154)
    • H (12)
    • M (142)
    • P (68)
    No filters matching ""

    For any technical inquiries, please reach out to us via our Customer Support center

    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?