+0
Downloaded file will be available after import in the {{cadTool}} tool library.
| Номер материала | 2546816 |
| Идентификатор каталога ISO | BGHX15L5PCSRLET |
| Идентификатор каталога ANSI | BGHX15L5PCSRLET |
| Grade | KD1410 |
| [Leff] Insert Effective Cut Length | 6 mm |
| Insert Effect Cut Length [Leff] | 0.2362 in |
| [L10] Insert Cutting Edge Length | 6 mm |
| [L10] Insert Cutting Edge Length | 0.2362 in |
| [S] Insert Thickness | 5 mm |
| [S] Insert Thickness | 0.1969 in |
| [BS] Corner Facet Length | 0.9 mm |
| [BS] Corner Facet Length | 0.0354 in |
| Average Chip Thickness [HM] | 0.02 mm |
| Average Chip Thickness [HM] | 0.0008 in |
| Cutting Edges per Insert | 1 |
Сплавы
KD1410
A PCD-tip brazed to carbide for machining aluminum with a very high silicon content, abrasive non-ferrous materials, and fiber-reinforced plastics. KD1410 can be used at very high cutting speeds, even where good surface finishes are required. This grade can be used both wet or dry but is suggested to use coolant where good surface finishes are required.
Создать решение для расчета подачи и скорости
После создания решения просто выберите значок Подача и Скорость, и наша система предоставит рекомендации. Вы можете настроить информацию, добавив свою машину и характеристики или внести изменения с помощью слайдеров.
| Вид пластины | Значения подачи на зуб (fz) в зависимости от ширины фрезерования (ae) | Вид пластины | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| BGHX… | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,16 | 0,27 | 0,05 | 0,15 | 0,25 | BGHX… |
| Легкие режимы обработки | Общего назначения | Тяжелая обработка |
| Группа материала | K110M | KC510M | KD1410 | KD1415 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | 505 | 475 | 450 | 640 | 570 | 525 | 4010 | 3505 | 2990 | 4010 | 3505 | 2990 |
| 3 | 410 | 365 | 320 | 580 | 535 | 490 | 1600 | 1495 | 1400 | 1600 | 1495 | 1400 | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Группа материала | Легкие режимы обработки | Общего назначения | Тяжелая обработка | |||
| (Чистовая геометрия) | – | (Черновая геометрия) | ||||
| износостойкость |  | прочность | ||||
| Геометрия | Сплав | Геометрия | Сплав | Геометрия | Сплав | |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | – | – | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | BGHX… | K110M | BGHX… | KC510M | BGHX… | KD1415 |
| N3 | BGHX… | K110M | BGHX… | KD1410 | BGHX… | KD1410 |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Номер по каталогу ISO
Номер по каталогу ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Номер по каталогу ISO | Сплав |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?