HARVI™ I TE – The Magic Solid End Mill

Hey! Nick here and it's good to see you again. I'm back in the technology lab at Kennametal. I'm with Jake again and he's going to be demonstrating some steel cutting with the new HARVI™ I TE End Mill which is an advancement on our high performance 4 Flute End Mill HARVI I. Now let's take a look at the HARVI™ I TE and its most important features.  

HARVI I TE Features

  1. Atwisted cutting edge  increasing the corner stability enabling soft cutting action even at highest ramping angles.  
  2. Aprecision faceted eccentric relief  reducing vibrations and reducing friction for excellent cutting conditions in multiple materials.  
  3. Chip gashes within the flutes  reducing cutting forces and supporting efficient ship evacuation.  

Milling with HARVI I TE

Now let's do some side milling. First, we'll dynamic mill at 5% radial engagement with 2 times the diameter axial depth of cut. Then we'll mill the side of the block at 60% radial engagement and 1.75 times the diameter axial depth of cut. The proprietary core design provides the tool with additional strength for large axial depth of cuts. We're going to use dynamic milling techniques to make a slot at a depth 2 times the diameter. Then we'll continue using dynamic milling techniques to create a feature at the corner of the block at a depth of 2xD. 

A new feature of this tool is that it can slot to a depth of up to 2 times its diameter. We're gonna take four slots with a 1/2-inch HARVI I TE and this block of 4140 steel. First, we'll take a slotting depth of 1 times the diameter. Next, we're going to slot at 1.25xD. Then, a slot at one in 3/4xD. And finally, a slot at 2xD. 

This tool can ramp up to a 45-degree angle and is also capable of plunging. First, we'll start by plunging 3 holes at a depth of 1.5 times the diameter. Then we'll take 2 ramping passes at a 45-degree angle at a radial depth of cut that is 40% of the diameter. Next, we'll ramp at a 10-degree angle at a full radial engagement. And our final ramping pass will be at a 30-degree angle at full radial engagement. We're now going to show you a continuous ramping pattern that emphasizes the 45-degree cutting capability. We'll start ramping up and down at a 45-degree angle with a radial depth of cut that is 40% of the diameter. Next, we'll continue ramping up and down at a 45-degree angle at full radial engagement.

Hope you enjoyed learning the many capabilities of the HARVI I TE. Until next time!

Related Articles

You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
New Folder
    • Applied Filters:
    • Clear All

product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material NumberISO Catalog NumberGrade  

You are about to leave the Solution building process.

Are you sure you want to leave?