KM32TS™ Internal Cutting Units
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (22)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
- M Stainless Steel (22)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
- K Cast Iron (22)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(22)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(22)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(22)
- N Non-Ferrous Materials (22)
- N1Wrought Aluminum (22)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(22)
- N3High-Silicon Aluminum Alloys Si >12.2%(22)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (22)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (22)
- N6Carbon, Graphite Composites, CFRP (22)
- N7MMC's (22)
- S High-Temp Alloys (22)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(22)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(22)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(22)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
- H Hardened Materials (19)
- H1Hardened Materials 44-48 HRC(19)
- H2Hardened Materials 48-55 HRC(19)
- H3Hardened Materials 56-60 HRC(19)
- H4Hardened Materials >60 HRC(19)
- C CFRP Materials (18)
- C1CFRP, CFRP / CFRP (18)
- C2CFRP / Aluminium CFRP / Non-Ferrous (18)
Applications
Applications
Facing (18)
Grooving (1)
ID Grooving (1)
ID Thread Turning (5)
Multiple Direction Cutting (18)
Profiling (17)
TRN Boring (17)
Threading (5)
Turning (18)
Type of Thread
Type of Thread
- 55 (3)
- 60 (4)
- ACME (2)
- API RD (2)
- BSPT (3)
- BSW (3)
- BUTTRESS (1)
- M (3)
- NPT (3)
- NPTF (3)
- RD DIN 405 (2)
- STUB ACME (2)
- TR DIN 103 (2)
- UN (4)
- UNJ (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (19)
- Lightly Interrupted Cut (19)
- Smooth Cut (19)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (4)
- 93.0 (6)
- 95.0 (12)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (19)
- 2.0 (19)
- 3.0 (3)
- 4.0 (13)
- 8.0 (3)
to
Over All Length [L]
Over All Length [L]
- 1.969 in(3)
- 2.362 in(4)
- 2.757 in(7)
- 3.15 in(5)
- 3.543 in(3)
to
Over All Length [L]
Over All Length [L]
- 50.0 mm(3)
- 60.0 mm(4)
- 70.0 mm(7)
- 80.0 mm(5)
- 90.0 mm(3)
to
Corner Radius
Corner Radius
- 0.001 in(2)
- 0.002 in(3)
- 0.003 in(3)
- 0.004 in(20)
- 0.006 in(2)
- 0.008 in(21)
- 0.01 in(1)
- 0.016 in(18)
- 0.02 in(1)
- 0.028 in(1)
- 0.03 in(1)
- 0.031 in(19)
- 0.037 in(1)
- 0.039 in(1)
- 0.047 in(12)
- 0.049 in(1)
- 0.06 in(1)
- 0.062 in(3)
- 0.063 in(5)
- 0.069 in(1)
- 0.094 in(1)
to
Corner Radius
Corner Radius
- 0.025 mm(2)
- 0.05 mm(3)
- 0.076 mm(3)
- 0.1 mm(20)
- 0.151 mm(2)
- 0.2 mm(21)
- 0.225 mm(1)
- 0.4 mm(18)
- 0.5 mm(1)
- 0.701 mm(1)
- 0.75 mm(1)
- 0.775 mm(1)
- 0.8 mm(18)
- 0.925 mm(1)
- 1.0 mm(1)
- 1.201 mm(12)
- 1.25 mm(1)
- 1.5 mm(1)
- 1.576 mm(3)
- 1.6 mm(5)
- 1.75 mm(1)
- 2.375 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (4)
- 241 (3)
- CG5 (5)
- CL4 (3)
- CM1 (5)
- CM2 (4)
- CM3 (3)
- CM4 (3)
- CPX (4)
- CW2 (3)
- CW2015 (4)
- CW5025 (4)
- GX (3)
- HCK20 (1)
- HCM15 (1)
- HK1500 (3)
- HT2 (3)
- HTX (3)
- K00331 (1)
- K060 (4)
- K090 (4)
- K1 (3)
- K10M (4)
- K10P (4)
- K10U (4)
- K15 (3)
- K15U (4)
- K20K (4)
- K21 (3)
- K25M (4)
- K25P (4)
- K2885 (1)
- K313 (19)
- K35P (1)
- K420 (5)
- K45 (4)
- K4H (1)
- K68 (21)
- KB1340 (3)
- KB1345 (6)
- KB1610 (15)
- KB1625 (6)
- KB1630 (11)
- KB5610 (13)
- KB5625 (9)
- KB5630 (9)
- KB9610 (14)
- KB9640 (3)
- KBH10 (4)
- KBH10B (4)
- KBH20 (13)
- KBH20B (4)
- KBK35 (3)
- KC210 (4)
- KC250 (9)
- KC5010 (21)
- KC5025 (22)
- KC5410 (19)
- KC5510 (4)
- KC5525 (4)
- KC710 (9)
- KC720 (22)
- KC722 (6)
- KC730 (22)
- KC7310 (8)
- KC732 (18)
- KC8050 (18)
- KC810 (19)
- KC850 (19)
- KC9010 (15)
- KC9025 (18)
- KC910 (19)
- KC9105 (15)
- KC9110 (19)
- KC9120 (15)
- KC9125 (18)
- KC9140 (4)
- KC9145 (4)
- KC9215 (4)
- KC9225 (18)
- KC9240 (18)
- KC9240NEW (18)
- KC9245 (4)
- KC9315 (18)
- KC9320 (16)
- KC9325 (15)
- KC935 (19)
- KC950 (16)
- KC990 (18)
- KCD25 (15)
- KCK05 (18)
- KCK05B (6)
- KCK15 (15)
- KCK15B (15)
- KCK20 (19)
- KCK20B (19)
- KCM15 (18)
- KCM15B (13)
- KCM25 (18)
- KCM25B (15)
- KCM35 (11)
- KCM35B (3)
- KCP05 (18)
- KCP05B (4)
- KCP10 (18)
- KCP10B (19)
- KCP25 (18)
- KCP25B (19)
- KCP25C (18)
- KCP30 (18)
- KCP30B (4)
- KCP40 (4)
- KCP40B (4)
- KCPK05 (8)
- KCS10 (17)
- KCS10B (18)
- KCU10 (19)
- KCU10B (19)
- KCU25 (19)
- KCU25B (19)
- KD050 (15)
- KD081 (4)
- KD100 (18)
- KD105 (12)
- KD120 (15)
- KD1400 (18)
- KD1405 (18)
- KD1425 (18)
- KM1 (3)
- KMF (3)
- KS15 (3)
- KT1120 (3)
- KT125 (8)
- KT150 (8)
- KT175 (19)
- KT315 (19)
- KT325 (3)
- KTP10 (18)
- KTP25S (4)
- KU10 (9)
- KU10T (19)
- KU25T (3)
- KU30T (16)
- KY1310 (4)
- KY1320 (4)
- KY1540 (4)
- KY1615 (4)
- KY2000 (4)
- KY2100 (4)
- KY3000 (4)
- KY3400 (4)
- KY3500 (4)
- KY4000 (3)
- KY4300 (4)
- KY4400 (4)
- KYHK15B (4)
- KYK10 (4)
- KYK25 (4)
- KYK35 (4)
- KYS25 (4)
- KYS30 (4)
- NL200 (3)
- NL250 (4)
- NL300 (3)
- NL400 (3)
- NL920 (4)
- P25 (5)
- PB100 (3)
- PB170 (3)
- PB250 (3)
- PB300 (3)
- PS5 (3)
- SP0819 (3)
- SP3019 (3)
- SP4019 (4)
- SP4066 (1)
- THM (4)
- THM-X (3)
- THMF-X (3)
- TN10P (5)
- TN10U (4)
- TN15M (4)
- TN15U (4)
- TN2000 (3)
- TN20K (4)
- TN20P (4)
- TN30M (4)
- TN30P (4)
- TN4000 (3)
- TN5015 (4)
- TN5020 (3)
- TN5105 (4)
- TN5120 (4)
- TN6010 (5)
- TN6025 (7)
- TN7005 (4)
- TN7010 (4)
- TN7015 (4)
- TN7025 (4)
- TN7035 (3)
- TN7105 (3)
- TN7110 (5)
- TN7115 (4)
- TN7125 (3)
- TN7135 (3)
- TN8025 (4)
- TTI15 (3)
- TTR (3)
- TTS (3)
- TTX (3)
- W00162 (4)
- WBH10C (9)
- WBH10P (13)
- WBH10U (13)
- WBH20P (4)
- WBH25P (16)
- WBH25U (4)
- WBH30P (13)
- WBK40U (3)
- WBK45U (4)
- WDN00U (18)
- WDN25U (18)
- WK05CT (4)
- WK15CT (3)
- WK20CT (15)
- WM15CT (16)
- WM25CT (13)
- WM35CT (4)
- WP05CT (3)
- WP15CT (13)
- WP25CT (18)
- WP35CT (4)
- WS10PT (4)
- WS25PT (4)
- WU10HT (4)
- WU10PT (4)
- WU25PT (3)
- X00511 (3)
- X00580 (3)
- X00581 (3)
- X00582 (3)
- X00583 (3)
- X00584 (3)
- X00585 (3)
- X00586 (3)
- X00591 (3)
- X00592 (3)
- X00593 (3)
- X00594 (3)
- X00596 (3)
- X00597 (3)
- X00599 (3)
Hand Of Tool
Hand Of Tool
- L (10)
- R (12)
Wiper Insert
Wiper Insert
- N (22)
- Y (18)
F Dimension
F Dimension
- 7.0 mm(3)
- 9.0 mm(3)
- 11.0 mm(3)
- 13.0 mm(5)
- 17.0 mm(8)
to
F Dimension
F Dimension
- 0.276 in(3)
- 0.354 in(3)
- 0.433 in(3)
- 0.512 in(5)
- 0.669 in(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 13.0 mm(3)
- 16.0 mm(3)
- 18.5 mm(1)
- 20.0 mm(2)
- 25.0 mm(5)
- 32.0 mm(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.512 in(3)
- 0.63 in(3)
- 0.728 in(1)
- 0.787 in(2)
- 0.984 in(5)
- 1.26 in(8)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(1)
to
Cutting Direction
Cutting Direction
- B (12)
- E (6)
- S (4)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (4)
- DOUBLE POSITIVE (3)
- NEGATIVE-ZERO (2)
- NEUTRAL (ZERO) (7)
- POSITIVE-ZERO (6)
Maximum Bore Depth
Maximum Bore Depth
- 1.379 in(3)
- 1.655 in(2)
- 1.701 in(2)
- 2.205 in(2)
- 2.283 in(4)
- 2.362 in(6)
- 2.953 in(3)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(3)
- 42.0 mm(2)
- 43.2 mm(2)
- 56.0 mm(2)
- 58.0 mm(4)
- 60.0 mm(6)
- 75.0 mm(3)
to
Front-End
Clamp Style
Clamp Style
- M (6)
- N (1)
- S (15)
Cutting Width
Cutting Width
- 0.02 in(1)
- 0.031 in(1)
- 0.035 in(1)
- 0.039 in(1)
- 0.041 in(1)
- 0.047 in(1)
- 0.055 in(1)
- 0.058 in(1)
- 0.06 in(1)
- 0.062 in(1)
- 0.067 in(1)
- 0.069 in(1)
- 0.077 in(1)
- 0.079 in(1)
- 0.088 in(1)
- 0.089 in(1)
- 0.095 in(1)
- 0.098 in(1)
- 0.108 in(1)
- 0.119 in(1)
- 0.125 in(1)
- 0.126 in(1)
- 0.128 in(1)
- 0.129 in(1)
- 0.138 in(1)
- 0.15 in(1)
- 0.152 in(1)
to
Cutting Width
Cutting Width
- 0.5 mm(1)
- 0.775 mm(1)
- 0.8 mm(1)
- 0.9 mm(1)
- 1.0 mm(1)
- 1.05 mm(1)
- 1.201 mm(1)
- 1.401 mm(1)
- 1.475 mm(1)
- 1.5 mm(1)
- 1.576 mm(1)
- 1.701 mm(1)
- 1.75 mm(1)
- 1.951 mm(1)
- 2.0 mm(1)
- 2.2 mm(1)
- 2.225 mm(1)
- 2.25 mm(1)
- 2.401 mm(1)
- 2.5 mm(1)
- 2.75 mm(1)
- 3.0 mm(1)
- 3.176 mm(1)
- 3.2 mm(1)
- 3.25 mm(1)
- 3.276 mm(1)
- 3.5 mm(1)
- 3.801 mm(1)
- 3.85 mm(1)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (12)
- D-DIAMOND/RHOMBIC 55 (6)
- LT-TRIANGLE LAY DOWN THREAD 60 (3)
- TN-TOP NOTCH (1)
Insert Size
Insert Size
- 2 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.119 in(3)
- 0.125 in(1)
- 0.177 in(3)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 3.0 mm(3)
- 3.176 mm(1)
- 4.5 mm(3)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (15)
- B L (18)
- C A (4)
- C N (4)
- D P (18)
- H T (19)
- H W (22)
Back-End
System Size
System Size
- KM32 (19)
- KM32TS (3)
No filters matching ""