Kulové frézy s vyměnitelnými břitovými destičkami (KDMB) a torické břitové destičky (KDMT) jsou vhodné pro jakékoli hrubovací a dokončovací kopírovací operace.

KDMB - kulové frézy

Kulové břitové destičky pro 3D kopírovací aplikace.

Stopkové frézy s ocelovými a karbidovými stopkami.
Přímé, s odsazením a kuželové provedení.

Kuželové stopky jsou vhodné pro 5-osé obrábění.

Frézy se závitovou stopkou pro aplikace s krátkým vyložením,
s vnitřním chlazením.

KDMT/KDMS - torické frézy

Torické břitové destičky pro obrábění plochého dna a podpichů.

Zvláště vhodné pro vysoké posuvy.

Stopkové frézy s ocelovými a karbidovými stopkami s vnitřním chlazením.

Frézy se závitovou stopkou pro aplikace s krátkým vyložením,
s vnitřním chlazením.

Možné použití také na soustruzích s kleštinami ER
pro upínací jednotky pro revolvery.

Čtvercové břitové destičky pro 90° stěny.

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (203)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(203)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(203)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(203)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(203)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(203)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(203)
    • M Stainless Steel (203)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(203)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(203)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(203)
    • K Cast Iron (217)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(217)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(217)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(217)
    • N Non-Ferrous Materials (127)
      • N1
        Wrought Aluminum (127)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(127)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(127)
    • S High-Temp Alloys (138)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(84)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(84)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(138)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(84)
    • H Hardened Materials (187)
      • H1
        Hardened Materials 44-48 HRC(171)
      • H2
        Hardened Materials 48-55 HRC(187)
      • H3
        Hardened Materials 56-60 HRC(187)
    Applications
    Applications
    • PocketPocket (101)
    • Pocket HelicalPocket Helical (73)
    • Pocket MillingPocket Milling (101)
    • Profile MillingProfile Milling (101)
    • RampingRamping (101)
    • Shoulder Ball NoseShoulder Ball Nose (101)
    • Shoulder MillingShoulder Milling (101)
    • Slot Ball NoseSlot Ball Nose (73)
    • Slot MillingSlot Milling (101)
    • Slot Square EndSlot Square End (28)
    Cutting Diameter
    Cutting Diameter
    • 0.237 in(4)
    • 0.25 in(3)
    • 0.312 in(2)
    • 0.315 in(5)
    • 0.375 in(4)
    • 0.394 in(7)
    • 0.473 in(13)
    • 0.5 in(9)
    • 0.625 in(3)
    • 0.63 in(13)
    • 0.75 in(8)
    • 0.787 in(11)
    • 0.984 in(6)
    • 1.0 in(7)
    • 1.25 in(2)
    • 1.26 in(4)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 6.0 mm(4)
    • 6.351 mm(3)
    • 7.926 mm(2)
    • 8.0 mm(5)
    • 9.525 mm(4)
    • 10.0 mm(7)
    • 12.0 mm(13)
    • 12.701 mm(9)
    • 15.875 mm(3)
    • 16.0 mm(13)
    • 19.05 mm(8)
    • 20.0 mm(11)
    • 25.0 mm(6)
    • 25.401 mm(7)
    • 31.75 mm(2)
    • 32.0 mm(4)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 2.5 mm(2)
    • 3.0 mm(13)
    • 3.176 mm(3)
    • 3.95 mm(1)
    • 3.975 mm(1)
    • 4.0 mm(11)
    • 4.775 mm(4)
    • 5.0 mm(12)
    • 6.0 mm(11)
    • 6.351 mm(4)
    • 7.95 mm(3)
    • 8.0 mm(9)
    • 9.525 mm(6)
    • 10.0 mm(6)
    • 12.5 mm(5)
    • 12.701 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(3)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.098 in(2)
    • 0.119 in(13)
    • 0.125 in(3)
    • 0.156 in(2)
    • 0.157 in(11)
    • 0.188 in(4)
    • 0.197 in(12)
    • 0.237 in(11)
    • 0.25 in(4)
    • 0.313 in(3)
    • 0.315 in(9)
    • 0.375 in(6)
    • 0.394 in(6)
    • 0.492 in(5)
    • 0.5 in(5)
    • 0.625 in(2)
    • 0.63 in(3)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.119 in(1)
    • 0.157 in(2)
    • 0.197 in(2)
    • 0.237 in(1)
    • 0.315 in(3)
    • 0.394 in(1)
    • 0.473 in(1)
    • 0.63 in(1)
    • 0.787 in(2)
    • 0.984 in(2)
    • 1.024 in(2)
    • 1.102 in(2)
    • 1.181 in(1)
    • 1.26 in(3)
    • 1.31 in(1)
    • 1.319 in(1)
    • 1.339 in(3)
    • 1.379 in(3)
    • 1.393 in(1)
    • 1.417 in(1)
    • 1.457 in(3)
    • 1.575 in(5)
    • 1.599 in(1)
    • 1.623 in(1)
    • 1.655 in(1)
    • 1.754 in(1)
    • 1.772 in(3)
    • 1.811 in(2)
    • 1.85 in(3)
    • 1.891 in(2)
    • 1.901 in(1)
    • 1.909 in(1)
    • 1.95 in(1)
    • 1.969 in(3)
    • 1.982 in(1)
    • 2.047 in(4)
    • 2.087 in(2)
    • 2.126 in(1)
    • 2.165 in(2)
    • 2.205 in(1)
    • 2.244 in(2)
    • 2.362 in(6)
    • 2.37 in(1)
    • 2.402 in(1)
    • 2.48 in(1)
    • 2.757 in(5)
    • 2.835 in(1)
    • 2.953 in(1)
    • 3.031 in(1)
    • 3.071 in(1)
    • 3.15 in(3)
    • 3.228 in(1)
    • 3.539 in(1)
    • 3.938 in(2)
    • 4.134 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 3.0 mm(1)
    • 4.0 mm(2)
    • 5.0 mm(2)
    • 6.0 mm(1)
    • 8.0 mm(3)
    • 10.0 mm(1)
    • 12.0 mm(1)
    • 16.0 mm(1)
    • 20.0 mm(2)
    • 25.0 mm(2)
    • 26.0 mm(2)
    • 28.0 mm(2)
    • 30.0 mm(1)
    • 32.0 mm(3)
    • 33.275 mm(1)
    • 33.5 mm(1)
    • 34.0 mm(3)
    • 35.0 mm(3)
    • 35.35 mm(1)
    • 36.0 mm(1)
    • 37.0 mm(3)
    • 40.0 mm(5)
    • 40.625 mm(1)
    • 41.225 mm(1)
    • 42.0 mm(1)
    • 44.526 mm(1)
    • 45.0 mm(3)
    • 46.0 mm(2)
    • 47.0 mm(3)
    • 48.0 mm(2)
    • 48.276 mm(1)
    • 48.5 mm(1)
    • 49.526 mm(1)
    • 50.0 mm(3)
    • 50.35 mm(1)
    • 52.0 mm(4)
    • 53.0 mm(2)
    • 54.0 mm(1)
    • 55.0 mm(2)
    • 56.0 mm(1)
    • 57.0 mm(2)
    • 60.0 mm(6)
    • 60.2 mm(1)
    • 61.0 mm(1)
    • 63.0 mm(1)
    • 70.0 mm(5)
    • 72.0 mm(1)
    • 75.0 mm(1)
    • 77.0 mm(1)
    • 78.0 mm(1)
    • 80.0 mm(3)
    • 82.0 mm(1)
    • 89.9 mm(1)
    • 100.0 mm(2)
    • 105.0 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (93)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Screw-On Connection (7)
    • Straight-Cylindrical (94)
    Number of Flutes
    Number of Flutes
    • 2 (101)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (1)
    • 2.0 (226)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.713 in(2)
    • 1.792 in(2)
    • 1.949 in(1)
    • 2.028 in(1)
    • 2.441 in(1)
    • 3.543 in(2)
    • 3.938 in(6)
    • 4.724 in(5)
    • 4.803 in(3)
    • 5.118 in(2)
    • 5.12 in(1)
    • 5.197 in(1)
    • 5.513 in(8)
    • 5.591 in(3)
    • 5.906 in(13)
    • 5.909 in(1)
    • 5.984 in(2)
    • 6.281 in(1)
    • 6.299 in(13)
    • 6.307 in(1)
    • 6.378 in(4)
    • 6.891 in(7)
    • 6.969 in(2)
    • 7.48 in(5)
    • 7.559 in(2)
    • 7.875 in(1)
    • 8.268 in(7)
    • 8.27 in(1)
    • 8.346 in(1)
    • 9.055 in(1)
    • 9.449 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 43.5 mm(2)
    • 45.5 mm(2)
    • 49.5 mm(1)
    • 51.5 mm(1)
    • 62.0 mm(1)
    • 90.0 mm(2)
    • 100.0 mm(6)
    • 120.0 mm(5)
    • 122.0 mm(3)
    • 130.0 mm(2)
    • 130.05 mm(1)
    • 132.0 mm(1)
    • 140.0 mm(8)
    • 142.0 mm(3)
    • 150.0 mm(13)
    • 150.1 mm(1)
    • 152.0 mm(2)
    • 159.525 mm(1)
    • 160.0 mm(13)
    • 160.201 mm(1)
    • 162.0 mm(4)
    • 175.0 mm(7)
    • 177.0 mm(2)
    • 190.0 mm(5)
    • 192.0 mm(2)
    • 200.0 mm(1)
    • 210.0 mm(7)
    • 210.05 mm(1)
    • 212.0 mm(1)
    • 230.0 mm(1)
    • 240.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(9)
    • 0.02 in(1)
    • 0.024 in(3)
    • 0.031 in(39)
    • 0.039 in(41)
    • 0.04 in(20)
    • 0.052 in(8)
    • 0.063 in(33)
    • 0.079 in(14)
    • 0.103 in(2)
    • 0.119 in(14)
    • 0.125 in(8)
    • 0.156 in(9)
    • 0.157 in(20)
    • 0.188 in(13)
    • 0.197 in(18)
    • 0.237 in(20)
    • 0.25 in(18)
    • 0.312 in(12)
    • 0.313 in(12)
    • 0.315 in(17)
    • 0.375 in(17)
    • 0.394 in(19)
    • 0.492 in(16)
    • 0.5 in(15)
    • 0.625 in(7)
    • 0.63 in(10)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(9)
    • 0.5 mm(1)
    • 0.601 mm(3)
    • 0.8 mm(39)
    • 1.0 mm(41)
    • 1.026 mm(20)
    • 1.3 mm(8)
    • 1.6 mm(33)
    • 2.0 mm(14)
    • 2.6 mm(2)
    • 3.0 mm(14)
    • 3.176 mm(8)
    • 3.95 mm(8)
    • 3.975 mm(8)
    • 4.0 mm(20)
    • 4.775 mm(13)
    • 5.0 mm(18)
    • 6.0 mm(20)
    • 6.351 mm(18)
    • 7.926 mm(12)
    • 7.95 mm(12)
    • 8.0 mm(17)
    • 9.525 mm(17)
    • 10.0 mm(19)
    • 12.5 mm(16)
    • 12.701 mm(15)
    • 15.875 mm(7)
    • 16.0 mm(10)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC505M (94)
    • KC515M (103)
    • KC530M (94)
    • KCPH15 (95)
    • KCPK10 (162)
    • KCPK25 (92)
    • KCU15 (77)
    • KNS10 (109)
    Hand Of Tool
    Hand Of Tool
    • R (101)
    Rough Finish
    Rough Finish
    • F (64)
    Wiper Insert
    Wiper Insert
    • N (125)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 3.0 (101)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.237 in(5)
    • 0.25 in(3)
    • 0.312 in(2)
    • 0.313 in(1)
    • 0.315 in(9)
    • 0.375 in(5)
    • 0.394 in(11)
    • 0.473 in(13)
    • 0.5 in(10)
    • 0.625 in(4)
    • 0.63 in(13)
    • 0.75 in(10)
    • 0.787 in(13)
    • 0.984 in(9)
    • 1.0 in(9)
    • 1.25 in(2)
    • 1.26 in(6)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 6.0 mm(5)
    • 6.351 mm(3)
    • 7.926 mm(2)
    • 7.95 mm(1)
    • 8.0 mm(9)
    • 9.525 mm(5)
    • 10.0 mm(11)
    • 12.0 mm(13)
    • 12.701 mm(10)
    • 15.875 mm(4)
    • 16.0 mm(13)
    • 19.05 mm(10)
    • 20.0 mm(13)
    • 25.0 mm(9)
    • 25.401 mm(9)
    • 31.75 mm(2)
    • 32.0 mm(6)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • DMB-BALL NOSE (149)
    • DMT-TOROIDAL (78)
    Neck Diameter
    Neck Diameter
    • 0.211 in(2)
    • 0.213 in(1)
    • 0.228 in(3)
    • 0.276 in(3)
    • 0.295 in(1)
    • 0.335 in(1)
    • 0.347 in(4)
    • 0.351 in(2)
    • 0.354 in(1)
    • 0.414 in(11)
    • 0.42 in(6)
    • 0.551 in(11)
    • 0.56 in(1)
    • 0.709 in(12)
    • 0.71 in(4)
    • 0.882 in(7)
    • 0.89 in(4)
    • 1.127 in(6)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 5.351 mm(2)
    • 5.4 mm(1)
    • 5.801 mm(3)
    • 7.0 mm(3)
    • 7.5 mm(1)
    • 8.5 mm(1)
    • 8.8 mm(4)
    • 8.9 mm(2)
    • 9.0 mm(1)
    • 10.5 mm(11)
    • 10.675 mm(6)
    • 14.0 mm(11)
    • 14.226 mm(1)
    • 18.0 mm(12)
    • 18.026 mm(4)
    • 22.401 mm(7)
    • 22.6 mm(4)
    • 28.6 mm(6)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • DMB-BALL NOSE (76)
    • DMT-TOROIDAL (50)
    Cutting Tool Material
    Cutting Tool Material
    • H W (126)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (94)
    • SCREW-ON (7)
    Back-End Diameter
    Back-End Diameter
    • 6.0 mm(3)
    • 6.351 mm(2)
    • 8.0 mm(3)
    • 9.525 mm(4)
    • 10.0 mm(6)
    • 12.0 mm(12)
    • 12.701 mm(11)
    • 13.0 mm(4)
    • 15.875 mm(4)
    • 16.0 mm(11)
    • 18.0 mm(2)
    • 19.05 mm(7)
    • 20.0 mm(11)
    • 21.0 mm(1)
    • 25.0 mm(5)
    • 25.401 mm(7)
    • 31.75 mm(3)
    • 32.0 mm(5)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.237 in(3)
    • 0.25 in(2)
    • 0.315 in(3)
    • 0.375 in(4)
    • 0.394 in(6)
    • 0.473 in(12)
    • 0.5 in(11)
    • 0.512 in(4)
    • 0.625 in(4)
    • 0.63 in(11)
    • 0.709 in(2)
    • 0.75 in(7)
    • 0.787 in(11)
    • 0.828 in(1)
    • 0.984 in(5)
    • 1.0 in(7)
    • 1.25 in(3)
    • 1.26 in(5)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?