Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Mill 1-10™ • Two Cutting Edges • Ap1 max 10mm

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (226)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(209)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(209)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(209)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(209)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(211)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(224)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(224)
    • M Stainless Steel (217)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(217)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(217)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(217)
    • K Cast Iron (191)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(191)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(190)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(190)
    • N Non-Ferrous Materials (146)
      • N1
        Wrought Aluminum (146)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(145)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(145)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (118)
    • S High-Temp Alloys (217)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(195)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(195)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(195)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(217)
    • H Hardened Materials (148)
      • H1
        Hardened Materials 44-48 HRC(148)
    Vybrat první volbu
    • BR (15)
    • CN (111)
    • DE (113)
    • GB (63)
    • IN (29)
    • SG (46)
    • US (98)
    Applications
    Applications
    • Face MillingFace Milling (129)
    • PocketPocket (129)
    • Pocket HelicalPocket Helical (129)
    • Pocket MillingPocket Milling (129)
    • RampingRamping (129)
    • Shoulder MillingShoulder Milling (129)
    • Shoulder RoughingShoulder Roughing (129)
    • Shoulder Square EndShoulder Square End (129)
    • Slot MillingSlot Milling (82)
    • Slot Square EndSlot Square End (82)
    Cutting Diameter
    Cutting Diameter
    • 0.473 in(1)
    • 0.5 in(1)
    • 0.625 in(5)
    • 0.63 in(5)
    • 0.709 in(1)
    • 0.75 in(11)
    • 0.787 in(14)
    • 0.866 in(1)
    • 0.875 in(1)
    • 0.984 in(14)
    • 1.0 in(16)
    • 1.1 in(1)
    • 1.102 in(1)
    • 1.25 in(13)
    • 1.26 in(14)
    • 1.5 in(5)
    • 1.575 in(5)
    • 1.655 in(1)
    • 1.969 in(4)
    • 2.0 in(4)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(2)
    • 4.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.0 mm(1)
    • 12.701 mm(1)
    • 15.875 mm(5)
    • 16.0 mm(5)
    • 18.0 mm(1)
    • 19.05 mm(11)
    • 20.0 mm(14)
    • 22.0 mm(1)
    • 22.225 mm(1)
    • 25.0 mm(14)
    • 25.401 mm(16)
    • 27.951 mm(1)
    • 28.0 mm(1)
    • 31.75 mm(13)
    • 32.0 mm(14)
    • 38.1 mm(5)
    • 40.0 mm(5)
    • 42.0 mm(1)
    • 50.0 mm(4)
    • 50.801 mm(4)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(2)
    • 101.601 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.675 mm(1)
    • 9.701 mm(2)
    • 9.726 mm(1)
    • 9.75 mm(3)
    • 9.775 mm(2)
    • 9.8 mm(1)
    • 9.826 mm(2)
    • 9.875 mm(15)
    • 9.9 mm(1)
    • 9.925 mm(4)
    • 9.951 mm(18)
    • 10.0 mm(2)
    • 10.025 mm(18)
    • 10.05 mm(12)
    • 10.076 mm(7)
    • 10.101 mm(10)
    • 10.25 mm(2)
    • 18.675 mm(3)
    • 18.8 mm(3)
    • 18.925 mm(3)
    • 27.75 mm(2)
    • 27.776 mm(1)
    • 35.926 mm(1)
    • 35.95 mm(1)
    • 36.0 mm(2)
    • 36.375 mm(3)
    • 44.325 mm(4)
    • 44.776 mm(3)
    • 44.801 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.381 in(1)
    • 0.382 in(2)
    • 0.383 in(1)
    • 0.384 in(3)
    • 0.385 in(2)
    • 0.386 in(1)
    • 0.387 in(2)
    • 0.389 in(15)
    • 0.39 in(1)
    • 0.391 in(4)
    • 0.392 in(18)
    • 0.394 in(2)
    • 0.395 in(18)
    • 0.396 in(12)
    • 0.397 in(7)
    • 0.398 in(10)
    • 0.404 in(2)
    • 0.735 in(3)
    • 0.74 in(3)
    • 0.745 in(3)
    • 1.093 in(2)
    • 1.094 in(1)
    • 1.414 in(1)
    • 1.415 in(1)
    • 1.417 in(2)
    • 1.432 in(3)
    • 1.745 in(4)
    • 1.764 in(5)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.787 in(1)
    • 0.8 in(1)
    • 0.972 in(1)
    • 0.984 in(4)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(3)
    • 1.053 in(2)
    • 1.1 in(6)
    • 1.102 in(9)
    • 1.239 in(1)
    • 1.249 in(2)
    • 1.25 in(13)
    • 1.26 in(11)
    • 1.393 in(1)
    • 1.417 in(2)
    • 1.5 in(3)
    • 1.564 in(2)
    • 1.575 in(24)
    • 1.589 in(2)
    • 1.6 in(7)
    • 1.614 in(2)
    • 1.75 in(2)
    • 1.79 in(1)
    • 1.811 in(2)
    • 1.879 in(2)
    • 1.889 in(1)
    • 1.891 in(2)
    • 1.901 in(2)
    • 1.969 in(6)
    • 2.0 in(3)
    • 2.091 in(2)
    • 2.126 in(3)
    • 2.362 in(2)
    • 2.4 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 20.0 mm(1)
    • 20.326 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(4)
    • 25.076 mm(1)
    • 25.375 mm(1)
    • 25.401 mm(3)
    • 26.75 mm(2)
    • 27.951 mm(6)
    • 28.0 mm(9)
    • 31.475 mm(1)
    • 31.725 mm(2)
    • 31.75 mm(13)
    • 32.0 mm(11)
    • 35.35 mm(1)
    • 36.0 mm(2)
    • 38.1 mm(3)
    • 39.725 mm(2)
    • 40.0 mm(24)
    • 40.35 mm(2)
    • 40.651 mm(7)
    • 41.0 mm(2)
    • 44.45 mm(2)
    • 45.475 mm(1)
    • 46.0 mm(2)
    • 47.725 mm(2)
    • 47.975 mm(1)
    • 48.0 mm(2)
    • 48.25 mm(2)
    • 50.0 mm(6)
    • 50.801 mm(3)
    • 53.1 mm(2)
    • 54.0 mm(3)
    • 60.0 mm(2)
    • 60.95 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (129)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (25)
    • B-Cutter Retention Screw (2)
    • Screw-On Connection (22)
    • Straight-Cylindrical (56)
    • Weldon (24)
    Number of Flutes
    Number of Flutes
    • 1 (2)
    • 10 (2)
    • 12 (1)
    • 2 (35)
    • 3 (33)
    • 4 (25)
    • 5 (16)
    • 6 (7)
    • 8 (6)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (119)
    • 2.0 (253)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(12)
    • 1.655 in(1)
    • 1.669 in(1)
    • 1.75 in(2)
    • 1.848 in(2)
    • 1.85 in(2)
    • 1.969 in(6)
    • 2.0 in(3)
    • 2.008 in(1)
    • 2.116 in(2)
    • 2.126 in(3)
    • 2.362 in(2)
    • 2.4 in(2)
    • 2.406 in(3)
    • 2.48 in(5)
    • 2.52 in(2)
    • 2.914 in(1)
    • 3.031 in(1)
    • 3.11 in(2)
    • 3.13 in(2)
    • 3.281 in(2)
    • 3.422 in(1)
    • 3.426 in(1)
    • 3.5 in(1)
    • 3.504 in(2)
    • 3.531 in(2)
    • 3.543 in(1)
    • 3.551 in(1)
    • 3.88 in(2)
    • 3.938 in(1)
    • 3.976 in(2)
    • 4.0 in(1)
    • 4.055 in(1)
    • 4.071 in(1)
    • 4.134 in(1)
    • 4.331 in(3)
    • 4.37 in(2)
    • 4.407 in(1)
    • 4.5 in(2)
    • 4.529 in(3)
    • 4.724 in(2)
    • 4.734 in(1)
    • 4.8 in(5)
    • 5.118 in(2)
    • 5.2 in(2)
    • 6.681 in(1)
    • 6.682 in(2)
    • 6.688 in(1)
    • 6.689 in(1)
    • 6.694 in(5)
    • 6.7 in(4)
    • 7.863 in(4)
    • 7.875 in(5)
    • 7.989 in(3)
    • 8.0 in(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(12)
    • 42.0 mm(1)
    • 42.401 mm(1)
    • 44.45 mm(2)
    • 46.95 mm(2)
    • 47.0 mm(2)
    • 50.0 mm(6)
    • 50.801 mm(3)
    • 51.0 mm(1)
    • 53.75 mm(2)
    • 54.0 mm(3)
    • 60.0 mm(2)
    • 60.95 mm(2)
    • 61.1 mm(3)
    • 63.0 mm(5)
    • 64.0 mm(2)
    • 74.0 mm(1)
    • 76.95 mm(1)
    • 79.0 mm(2)
    • 79.5 mm(2)
    • 83.325 mm(2)
    • 86.926 mm(1)
    • 87.0 mm(1)
    • 88.9 mm(1)
    • 89.0 mm(2)
    • 89.676 mm(2)
    • 90.0 mm(1)
    • 90.2 mm(1)
    • 98.551 mm(2)
    • 100.0 mm(1)
    • 101.0 mm(2)
    • 101.601 mm(1)
    • 103.0 mm(1)
    • 103.4 mm(1)
    • 105.0 mm(1)
    • 110.0 mm(3)
    • 111.0 mm(2)
    • 111.926 mm(1)
    • 114.301 mm(2)
    • 115.0 mm(3)
    • 120.0 mm(2)
    • 120.25 mm(1)
    • 121.926 mm(5)
    • 130.0 mm(2)
    • 132.076 mm(2)
    • 169.701 mm(1)
    • 169.726 mm(2)
    • 169.875 mm(1)
    • 169.9 mm(1)
    • 170.0 mm(5)
    • 170.175 mm(4)
    • 199.726 mm(4)
    • 200.0 mm(5)
    • 202.925 mm(3)
    • 203.201 mm(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(121)
    • 0.016 in(139)
    • 0.031 in(150)
    • 0.039 in(121)
    • 0.047 in(137)
    • 0.063 in(135)
    • 0.079 in(124)
    • 0.094 in(124)
    • 0.122 in(140)
    • 0.157 in(129)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(121)
    • 0.4 mm(139)
    • 0.8 mm(150)
    • 1.0 mm(121)
    • 1.201 mm(137)
    • 1.6 mm(135)
    • 2.0 mm(124)
    • 2.375 mm(124)
    • 3.1 mm(140)
    • 4.0 mm(129)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (130)
    • KC410M (136)
    • KC422M (134)
    • KC510M (118)
    • KC520M (136)
    • KC522M (144)
    • KC725M (154)
    • KCK15 (124)
    • KCK20B (124)
    • KCKP10 (118)
    • KCPK30 (151)
    • KCPM20 (130)
    • KCPM40 (138)
    • KCSM30 (130)
    • KCSM40 (144)
    • KD1410 (119)
    Hand Of Tool
    Hand Of Tool
    • R (128)
    • R - Right Hand Helix/Flute (1)
    Wiper Insert
    Wiper Insert
    • N (126)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.5 (3)
    • 0.75 (4)
    • 1.0 (4)
    • 1.5 (8)
    • 1.75 (1)
    • 2.0 (13)
    • 2.5 (12)
    • 2.75 (12)
    • 3.0 (4)
    • 3.25 (2)
    • 4.0 (26)
    • 4.5 (2)
    • 5.0 (2)
    • 5.25 (1)
    • 6.0 (12)
    • 6.5 (10)
    • 7.5 (1)
    • 8.0 (2)
    • 9.5 (8)
    • 11.5 (2)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (234)
    • X-PARALLELOGRAM 70 (133)
    • X-PARALLELOGRAM 75 (146)
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • E-PARALLELOGRAM 70 (105)
    • X-PARALLELOGRAM 70 (4)
    • X-PARALLELOGRAM 75 (17)
    Cutting Edge Length
    Cutting Edge Length
    • 10.025 mm(4)
    • 10.101 mm(3)
    • 10.201 mm(4)
    • 10.351 mm(64)
    • 10.451 mm(10)
    • 10.476 mm(41)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.395 in(4)
    • 0.398 in(3)
    • 0.402 in(4)
    • 0.409 in(64)
    • 0.412 in(10)
    • 0.413 in(41)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (16)
    • GE (21)
    • HD (43)
    • LD (44)
    Cutting Tool Material
    Cutting Tool Material
    • D P (2)
    • H W (123)
    Tolerance Class
    Tolerance Class
    • C (105)
    • P (21)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (80)
    • SCREW-ON (22)
    • SHELL MILL (27)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(2)
    • 15.875 mm(3)
    • 16.0 mm(10)
    • 18.0 mm(5)
    • 19.0 mm(5)
    • 19.05 mm(21)
    • 20.0 mm(12)
    • 21.0 mm(5)
    • 22.0 mm(6)
    • 25.0 mm(12)
    • 25.401 mm(13)
    • 27.0 mm(2)
    • 29.0 mm(10)
    • 31.75 mm(9)
    • 32.0 mm(13)
    • 38.1 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.512 in(2)
    • 0.625 in(3)
    • 0.63 in(10)
    • 0.709 in(5)
    • 0.748 in(5)
    • 0.75 in(21)
    • 0.787 in(12)
    • 0.828 in(5)
    • 0.866 in(6)
    • 0.984 in(12)
    • 1.0 in(13)
    • 1.063 in(2)
    • 1.143 in(10)
    • 1.25 in(9)
    • 1.26 in(13)
    • 1.5 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Inserts Mill 1-10™
    (126)

    Inserts Mill 1-10™

    Cutters Mill 1-10™ • Metric
    (67)

    Cutters Mill 1-10™ • Metric

    Cutters Mill 1-10™ • Inch
    (62)

    Cutters Mill 1-10™ • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?