Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Cutters Mill 1-14™ • Inch

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (49)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(49)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(49)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(49)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(49)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(49)
    • M Stainless Steel (49)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(49)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(49)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(49)
    • K Cast Iron (49)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(49)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(49)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(49)
    • N Non-Ferrous Materials (49)
      • N1
        Wrought Aluminum (49)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(49)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(49)
    • S High-Temp Alloys (49)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(49)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(49)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(49)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(49)
    • H Hardened Materials (49)
      • H1
        Hardened Materials 44-48 HRC(49)
    Vybrat první volbu
    • US (36)
    Applications
    Applications
    • Face MillingFace Milling (49)
    • PocketPocket (49)
    • Pocket HelicalPocket Helical (49)
    • Pocket MillingPocket Milling (49)
    • Profile MillingProfile Milling (3)
    • RampingRamping (49)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (3)
    • Shoulder MillingShoulder Milling (49)
    • Shoulder RoughingShoulder Roughing (13)
    • Shoulder Square EndShoulder Square End (49)
    • Slot MillingSlot Milling (44)
    • Slot SideSlot Side (3)
    • Slot Square EndSlot Square End (44)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(1)
    • 0.75 in(3)
    • 0.875 in(1)
    • 0.971 in(1)
    • 1.0 in(7)
    • 1.25 in(9)
    • 1.5 in(11)
    • 2.0 in(6)
    • 2.5 in(5)
    • 3.0 in(3)
    • 4.0 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(1)
    • 19.05 mm(3)
    • 22.225 mm(1)
    • 24.651 mm(1)
    • 25.401 mm(7)
    • 31.75 mm(9)
    • 38.1 mm(11)
    • 50.801 mm(6)
    • 63.5 mm(5)
    • 76.2 mm(3)
    • 101.601 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 14.0 mm(8)
    • 14.101 mm(3)
    • 14.3 mm(5)
    • 14.4 mm(5)
    • 14.476 mm(2)
    • 14.5 mm(5)
    • 14.601 mm(4)
    • 14.726 mm(6)
    • 15.5 mm(1)
    • 27.201 mm(1)
    • 27.6 mm(1)
    • 27.8 mm(1)
    • 39.901 mm(2)
    • 40.401 mm(1)
    • 40.95 mm(1)
    • 52.801 mm(1)
    • 53.45 mm(1)
    • 54.1 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.551 in(8)
    • 0.555 in(3)
    • 0.564 in(5)
    • 0.568 in(5)
    • 0.571 in(2)
    • 0.572 in(5)
    • 0.576 in(4)
    • 0.58 in(6)
    • 0.61 in(1)
    • 1.071 in(1)
    • 1.087 in(1)
    • 1.094 in(1)
    • 1.571 in(2)
    • 1.591 in(1)
    • 1.612 in(1)
    • 2.079 in(1)
    • 2.104 in(1)
    • 2.13 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.5 in(3)
    • 1.575 in(7)
    • 1.625 in(1)
    • 1.73 in(1)
    • 1.75 in(13)
    • 2.0 in(5)
    • 2.23 in(2)
    • 2.25 in(10)
    • 2.5 in(4)
    • 3.0 in(3)
    Reach MinkomuReach Max
    Reach
    Reach
    • 38.1 mm(3)
    • 40.0 mm(7)
    • 41.276 mm(1)
    • 43.95 mm(1)
    • 44.45 mm(13)
    • 50.801 mm(5)
    • 56.651 mm(2)
    • 57.151 mm(10)
    • 63.5 mm(4)
    • 76.2 mm(3)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (17)
    • CV-Caterpillar V-Flange In (3)
    • Straight-Cylindrical (9)
    • Weldon (20)
    Number of Flutes
    Number of Flutes
    • 1 (1)
    • 10 (1)
    • 2 (7)
    • 3 (18)
    • 4 (10)
    • 5 (7)
    • 6 (2)
    • 7 (1)
    • 8 (2)
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(7)
    • 1.75 in(3)
    • 2.0 in(3)
    • 2.5 in(3)
    • 3.0 in(1)
    • 3.531 in(1)
    • 3.781 in(2)
    • 4.01 in(1)
    • 4.03 in(4)
    • 4.28 in(2)
    • 4.51 in(2)
    • 4.53 in(5)
    • 4.78 in(1)
    • 5.281 in(1)
    • 5.687 in(3)
    • 5.69 in(1)
    • 6.5 in(1)
    • 7.5 in(1)
    • 8.0 in(3)
    • 10.0 in(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(7)
    • 44.45 mm(3)
    • 50.801 mm(3)
    • 63.5 mm(3)
    • 76.2 mm(1)
    • 89.676 mm(1)
    • 96.0 mm(2)
    • 101.851 mm(1)
    • 102.351 mm(4)
    • 108.7 mm(2)
    • 114.551 mm(2)
    • 115.051 mm(5)
    • 121.4 mm(1)
    • 134.125 mm(1)
    • 144.451 mm(3)
    • 144.525 mm(1)
    • 165.101 mm(1)
    • 190.5 mm(1)
    • 203.201 mm(3)
    • 254.0 mm(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(47)
    • 0.016 in(47)
    • 0.031 in(47)
    • 0.047 in(47)
    • 0.063 in(47)
    • 0.079 in(47)
    • 0.094 in(47)
    • 0.122 in(49)
    • 0.157 in(49)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(47)
    • 0.4 mm(47)
    • 0.8 mm(47)
    • 1.201 mm(47)
    • 1.6 mm(47)
    • 2.0 mm(47)
    • 2.375 mm(47)
    • 3.1 mm(49)
    • 4.0 mm(49)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (49)
    • KC422M (49)
    • KC520M (47)
    • KC522M (49)
    • KC725M (49)
    • KCK15 (47)
    • KCK20B (47)
    • KCPK30 (49)
    • KCPM20 (49)
    • KCPM40 (47)
    • KCSM30 (49)
    • KCSM40 (49)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.5 (2)
    • 2.0 (3)
    • 2.5 (5)
    • 3.4 (6)
    • 5.2 (8)
    • 5.5 (3)
    • 6.9 (5)
    • 7.2 (4)
    • 10.2 (4)
    • 10.4 (3)
    • 10.9 (1)
    • 13.2 (1)
    • 18.0 (1)
    • 18.5 (2)
    • 25.0 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (49)
    • X-PARALLELOGRAM 70 (49)
    Neck Diameter
    Neck Diameter
    • 1.159 in(3)
    • 1.211 in(1)
    • 1.48 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 29.451 mm(3)
    • 30.75 mm(1)
    • 37.6 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (29)
    • SHELL MILL (17)
    • TAPER SHANK (3)
    System Size
    System Size
    • CV40 (3)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 19.05 mm(7)
    • 19.1 mm(6)
    • 25.401 mm(15)
    • 31.75 mm(14)
    • 38.1 mm(3)
    • 44.45 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.75 in(7)
    • 0.752 in(6)
    • 1.0 in(15)
    • 1.25 in(14)
    • 1.5 in(3)
    • 1.75 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Mill 1-14™ • End Mill • Weldon Shank • Inch
    (7)

    Mill 1-14™ • End Mill • Weldon Shank • Inch

    Mill 1-14™ • Helical End Mill • Weldon Shank • Inch
    (5)

    Mill 1-14™ • Helical End Mill • Weldon Shank • Inch

    Mill 1-14™ • Shell Mill • Inch
    (12)

    Mill 1-14™ • Shell Mill • Inch

    Mill 1-14™ • End Mill • Cylindrical Shank • Inch
    (5)

    Mill 1-14™ • End Mill • Cylindrical Shank • Inch

    Mill 1-14™ • End Mill • Long • Cylindrical Shank • Inch
    (4)

    Mill 1-14™ • End Mill • Long • Cylindrical Shank • Inch

    Mill 1-14™ • End Mill • Reduced Diameter Weldon Shank • Inch
    (5)

    Mill 1-14™ • End Mill • Reduced Diameter Weldon Shank • Inch

    Mill 1-14™ • Helical Shell Mill • Inch
    (5)

    Mill 1-14™ • Helical Shell Mill • Inch

    Mill 1-14™ • End Mill • Steep Taper CV40 • Inch
    (3)

    Mill 1-14™ • End Mill • Steep Taper CV40 • Inch

    Mill 1-14™ • End Mill • Reduced Diameter Weldon Shank • For corner radii greater than .079" (2.4mm) • Inch
    (3)

    Mill 1-14™ • End Mill • Reduced Diameter Weldon Shank • For corner radii greater than .079" (2.4mm) • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?