Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Karbidové závitování

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (29)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(29)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(29)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(29)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(29)
    • K Cast Iron (53)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(53)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(53)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(53)
    • N Non-Ferrous Materials (21)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(21)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(21)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
    • H Hardened Materials (7)
      • H3
        Hardened Materials 56-60 HRC(7)
      • H4
        Hardened Materials >60 HRC(7)
    Vybrat první volbu
    • IN (10)
    Applications
    Applications
    • Tapping Blind HoleTapping Blind Hole (71)
    • Tapping Through HoleTapping Through Hole (40)
    • ThreadingThreading (110)
    Cutting Length
    Cutting Length
    • 6.0 mm(3)
    • 7.0 mm(6)
    • 8.0 mm(4)
    • 9.0 mm(2)
    • 10.0 mm(13)
    • 12.0 mm(11)
    • 13.0 mm(6)
    • 14.0 mm(3)
    • 15.0 mm(19)
    • 16.0 mm(4)
    • 17.0 mm(2)
    • 18.0 mm(9)
    • 19.0 mm(3)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 21.0 mm(8)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 23.875 mm(1)
    • 24.0 mm(10)
    • 28.0 mm(1)
    • 30.0 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.237 in(3)
    • 0.276 in(6)
    • 0.315 in(4)
    • 0.354 in(2)
    • 0.394 in(13)
    • 0.473 in(11)
    • 0.512 in(6)
    • 0.551 in(3)
    • 0.591 in(19)
    • 0.63 in(4)
    • 0.669 in(2)
    • 0.709 in(9)
    • 0.748 in(3)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.828 in(8)
    • 0.866 in(1)
    • 0.87 in(1)
    • 0.941 in(1)
    • 0.946 in(10)
    • 1.102 in(1)
    • 1.181 in(1)
    Cutting Length MinkomuCutting Length Max
    Type of Thread
    Type of Thread
    • M (83)
    • UNC (23)
    • UNF (4)
    Thread Size
    Thread Size
    • 1/2 - 13 (4)
    • 1/4 - 20 (4)
    • 1/4 - 28 (2)
    • 10 - 24 (1)
    • 10 - 32 (1)
    • 3/8 - 16 (4)
    • 3/8 - 24 (1)
    • 5/16 - 18 (3)
    • 5/8 - 11 (1)
    • 6 - 32 (1)
    • 7/16 - 14 (3)
    • 8 - 32 (2)
    • M10 X 1 (4)
    • M10 X 1,25 (1)
    • M10 X 1,5 (12)
    • M12 X 1,25 (1)
    • M12 X 1,5 (3)
    • M12 X 1,75 (10)
    • M14 X 1,25 (1)
    • M14 X 1,5 (5)
    • M14 X 2 (4)
    • M16 X 2 (4)
    • M20 X 2,5 (1)
    • M3 X 0,5 (1)
    • M4 X 0,7 (3)
    • M5 X 0,8 (5)
    • M6 X 1 (13)
    • M7 X 1 (1)
    • M8 X 1,25 (13)
    • M9 X 1,25 (1)
    Thread Tolerance Class ANSI
    Thread Tolerance Class ANSI
    • 3BX (27)
    Thread Tolerance Class ISO
    Thread Tolerance Class ISO
    • 6HX-I (83)
    Tap PD Class
    Tap PD Class
    • 3B (9)
    • 6H (15)
    Connection Style
    Connection Style
    • Cylindrical with Drive Square (30)
    • Straight-Cylindrical (80)
    Number of Flutes
    Number of Flutes
    • 2 (10)
    • 3 (30)
    • 4 (65)
    • 5 (5)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.362 in(10)
    • 2.48 in(2)
    • 2.757 in(16)
    • 3.15 in(17)
    • 3.543 in(22)
    • 3.938 in(24)
    • 3.94 in(2)
    • 4.331 in(16)
    • 5.513 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 60.0 mm(10)
    • 63.0 mm(2)
    • 70.0 mm(16)
    • 80.0 mm(17)
    • 90.0 mm(22)
    • 100.0 mm(24)
    • 100.075 mm(2)
    • 110.0 mm(16)
    • 140.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Coating
    Coating
    • AlCrTiN (52)
    • CrC/C (15)
    • TiAlN (30)
    • TiN (6)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC7512 (6)
    • KC7542 (29)
    • KCK17 (53)
    • KCN14 (15)
    • KCU36 (7)
    Tap Standard
    Tap Standard
    • DIN 2174 (3)
    • DIN 371 (18)
    • DIN 374 (5)
    • DIN 376 (4)
    Tap Type
    Tap Type
    • 13 (71)
    • 3 (15)
    • 8 (24)
    frontEnd
    Thread TPI
    Thread TPI
    • 11.0 (1)
    • 13.0 (4)
    • 14.0 (3)
    • 16.0 (4)
    • 18.0 (3)
    • 20.0 (4)
    • 24.0 (2)
    • 28.0 (2)
    • 32.0 (4)
    Thread TPI MinkomuThread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.5 mm(1)
    • 0.701 mm(3)
    • 0.8 mm(5)
    • 1.0 mm(18)
    • 1.25 mm(17)
    • 1.5 mm(20)
    • 1.75 mm(10)
    • 2.0 mm(8)
    • 2.5 mm(1)
    Thread Pitch MinkomuThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.02 in(1)
    • 0.028 in(3)
    • 0.031 in(5)
    • 0.039 in(18)
    • 0.049 in(17)
    • 0.06 in(20)
    • 0.069 in(10)
    • 0.079 in(8)
    • 0.098 in(1)
    Thread Pitch MinkomuThread Pitch Max
    Chamfer Form
    Chamfer Form
    • FB (51)
    • PC (39)
    • SB (20)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (109)
    Back-End Diameter
    Back-End Diameter
    • 4.5 mm(2)
    • 6.0 mm(20)
    • 6.351 mm(11)
    • 7.0 mm(3)
    • 7.95 mm(3)
    • 8.0 mm(13)
    • 9.0 mm(4)
    • 9.525 mm(5)
    • 10.0 mm(15)
    • 11.0 mm(3)
    • 11.125 mm(3)
    • 12.0 mm(18)
    • 12.701 mm(4)
    • 14.0 mm(4)
    • 14.3 mm(1)
    • 18.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.177 in(2)
    • 0.237 in(20)
    • 0.25 in(11)
    • 0.276 in(3)
    • 0.313 in(3)
    • 0.315 in(13)
    • 0.354 in(4)
    • 0.375 in(5)
    • 0.394 in(15)
    • 0.433 in(3)
    • 0.438 in(3)
    • 0.473 in(18)
    • 0.5 in(4)
    • 0.551 in(4)
    • 0.564 in(1)
    • 0.709 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    HP Carbide Taps

    HP Carbide Taps

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk