Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Soustružení závitů

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1186)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1186)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1186)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1186)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1186)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1186)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1186)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1186)
    • M Stainless Steel (1186)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1186)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1186)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1186)
    • K Cast Iron (1066)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1066)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1066)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1066)
    • N Non-Ferrous Materials (599)
      • N1
        Wrought Aluminum (599)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(559)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(75)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (599)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (559)
      • N6
        Carbon, Graphite Composites, CFRP (559)
      • N7
        MMC's (16)
    • S High-Temp Alloys (1179)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1179)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1179)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1179)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1179)
    • H Hardened Materials (346)
      • H1
        Hardened Materials 44-48 HRC(346)
      • H2
        Hardened Materials 48-55 HRC(247)
      • H3
        Hardened Materials 56-60 HRC(106)
      • H4
        Hardened Materials >60 HRC(106)
    Vybrat první volbu
    • DE (63)
    • GB (41)
    • SG (36)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (4)
    • Cut-OffCut-Off (4)
    • Deep GroovingDeep Grooving (4)
    • Face GroovingFace Grooving (191)
    • FacingFacing (4)
    • GroovingGrooving (134)
    • ID GroovingID Grooving (69)
    • ID Thread TurningID Thread Turning (681)
    • Multiple Direction CuttingMultiple Direction Cutting (4)
    • OD Thread TurningOD Thread Turning (924)
    • Plunge TurningPlunge Turning (4)
    • ProfilingProfiling (4)
    • ThreadingThreading (205)
    • TurningTurning (4)
    Type of Thread
    Type of Thread
    • 55 (136)
    • 60 (449)
    • ACME (316)
    • API (163)
    • API BUTTRESS (38)
    • API RD (162)
    • BSPT (95)
    • BSW (231)
    • BUTTRESS (208)
    • M (324)
    • NPT (185)
    • NPTF (95)
    • RD DIN 405 (116)
    • STUB ACME (226)
    • TR DIN 103 (120)
    • UN (508)
    • UNJ (270)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (191)
    • Lightly Interrupted Cut (191)
    • Smooth Cut (192)
    • Varying Depth of Cut (192)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (325)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (7)
    • Boring Bar Shank (115)
    • KM (17)
    • Toolholder (147)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (190)
    • 2.0 (727)
    • 3.0 (492)
    • 4.0 (5)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.181 in(17)
    • 1.625 in(7)
    • 2.165 in(1)
    • 2.192 in(1)
    • 2.362 in(1)
    • 2.5 in(4)
    • 2.757 in(2)
    • 3.15 in(2)
    • 3.25 in(2)
    • 3.346 in(2)
    • 3.5 in(4)
    • 3.938 in(10)
    • 4.0 in(3)
    • 4.5 in(14)
    • 4.921 in(14)
    • 5.0 in(25)
    • 5.906 in(32)
    • 5.984 in(2)
    • 5.996 in(1)
    • 6.0 in(52)
    • 6.024 in(1)
    • 6.063 in(2)
    • 6.102 in(3)
    • 6.694 in(15)
    • 6.891 in(4)
    • 7.0 in(11)
    • 7.008 in(2)
    • 7.079 in(2)
    • 7.087 in(11)
    • 7.875 in(9)
    • 7.931 in(1)
    • 7.976 in(1)
    • 8.0 in(7)
    • 8.058 in(2)
    • 8.082 in(1)
    • 9.843 in(8)
    • 9.879 in(1)
    • 10.0 in(18)
    • 11.811 in(6)
    • 12.0 in(8)
    • 13.781 in(1)
    • 14.0 in(7)
    • 16.0 in(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 30.0 mm(17)
    • 41.276 mm(7)
    • 55.0 mm(1)
    • 55.676 mm(1)
    • 60.0 mm(1)
    • 63.5 mm(4)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 82.551 mm(2)
    • 85.0 mm(2)
    • 88.9 mm(4)
    • 100.0 mm(10)
    • 101.601 mm(3)
    • 114.301 mm(14)
    • 125.0 mm(14)
    • 127.0 mm(25)
    • 150.0 mm(32)
    • 152.0 mm(2)
    • 152.3 mm(1)
    • 152.4 mm(52)
    • 153.0 mm(1)
    • 154.0 mm(2)
    • 155.0 mm(3)
    • 170.0 mm(15)
    • 175.0 mm(4)
    • 177.8 mm(11)
    • 178.0 mm(2)
    • 179.8 mm(2)
    • 180.0 mm(11)
    • 200.0 mm(9)
    • 201.425 mm(1)
    • 202.601 mm(1)
    • 203.201 mm(7)
    • 204.675 mm(2)
    • 205.275 mm(1)
    • 250.0 mm(8)
    • 250.925 mm(1)
    • 254.0 mm(18)
    • 300.0 mm(6)
    • 304.8 mm(8)
    • 350.0 mm(1)
    • 355.6 mm(7)
    • 406.401 mm(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(25)
    • 0.002 in(175)
    • 0.003 in(348)
    • 0.004 in(241)
    • 0.005 in(116)
    • 0.006 in(187)
    • 0.007 in(274)
    • 0.008 in(281)
    • 0.01 in(228)
    • 0.011 in(126)
    • 0.012 in(83)
    • 0.014 in(174)
    • 0.015 in(30)
    • 0.016 in(82)
    • 0.017 in(37)
    • 0.019 in(108)
    • 0.02 in(149)
    • 0.021 in(25)
    • 0.023 in(109)
    • 0.027 in(3)
    • 0.028 in(17)
    • 0.03 in(107)
    • 0.031 in(139)
    • 0.033 in(11)
    • 0.035 in(106)
    • 0.037 in(9)
    • 0.038 in(1)
    • 0.039 in(155)
    • 0.047 in(139)
    • 0.049 in(139)
    • 0.06 in(140)
    • 0.062 in(63)
    • 0.063 in(178)
    • 0.069 in(139)
    • 0.078 in(63)
    • 0.079 in(102)
    • 0.089 in(102)
    • 0.095 in(102)
    • 0.098 in(39)
    • 0.125 in(39)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(25)
    • 0.05 mm(175)
    • 0.076 mm(348)
    • 0.1 mm(241)
    • 0.125 mm(116)
    • 0.151 mm(187)
    • 0.176 mm(274)
    • 0.2 mm(281)
    • 0.225 mm(114)
    • 0.25 mm(179)
    • 0.275 mm(126)
    • 0.301 mm(83)
    • 0.325 mm(156)
    • 0.351 mm(120)
    • 0.375 mm(30)
    • 0.4 mm(82)
    • 0.426 mm(37)
    • 0.45 mm(107)
    • 0.476 mm(33)
    • 0.5 mm(149)
    • 0.525 mm(25)
    • 0.576 mm(109)
    • 0.65 mm(3)
    • 0.701 mm(17)
    • 0.75 mm(107)
    • 0.775 mm(139)
    • 0.826 mm(11)
    • 0.9 mm(106)
    • 0.925 mm(9)
    • 0.976 mm(1)
    • 1.0 mm(155)
    • 1.201 mm(139)
    • 1.25 mm(139)
    • 1.5 mm(139)
    • 1.526 mm(1)
    • 1.576 mm(63)
    • 1.6 mm(178)
    • 1.75 mm(139)
    • 1.975 mm(63)
    • 2.0 mm(102)
    • 2.25 mm(102)
    • 2.401 mm(102)
    • 2.5 mm(39)
    • 3.176 mm(39)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(917)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(917)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00331 (46)
    • K1 (8)
    • K2885 (139)
    • K313 (185)
    • K420 (202)
    • K4H (100)
    • K68 (277)
    • KB1345 (102)
    • KB1630 (102)
    • KB5625 (63)
    • KBH20 (32)
    • KC250 (147)
    • KC5010 (455)
    • KC5025 (758)
    • KC5410 (179)
    • KC710 (245)
    • KC720 (300)
    • KC722 (231)
    • KC730 (388)
    • KC732 (63)
    • KC810 (197)
    • KC850 (234)
    • KC910 (100)
    • KC9105 (1)
    • KC9110 (178)
    • KC9120 (63)
    • KC9320 (178)
    • KC935 (178)
    • KC950 (178)
    • KCK20 (139)
    • KCK20B (178)
    • KCP10B (178)
    • KCP25B (178)
    • KCU10 (268)
    • KCU10B (178)
    • KCU25 (270)
    • KD050 (32)
    • KD081 (63)
    • KD100 (84)
    • KD120 (102)
    • KD1425 (63)
    • KT175 (139)
    • KT315 (178)
    • KU10T (178)
    • KU25T (231)
    • KU30T (178)
    • KY3000 (102)
    • PN120 (2)
    • SP4066 (10)
    • THM (8)
    • TN10P (8)
    • TN6010 (11)
    • TN6025 (17)
    • TN7110 (11)
    • TTS (2)
    • WU10HT (2)
    • WU10PT (5)
    • WU25PT (2)
    Hand Of Tool
    Hand Of Tool
    • L (116)
    • R (170)
    Wiper Insert
    Wiper Insert
    • N (1238)
    F Dimension
    F Dimension
    • 6.551 mm(3)
    • 6.726 mm(1)
    • 7.0 mm(2)
    • 7.101 mm(4)
    • 7.301 mm(4)
    • 8.25 mm(1)
    • 8.9 mm(5)
    • 9.525 mm(2)
    • 10.0 mm(1)
    • 10.3 mm(2)
    • 10.775 mm(1)
    • 10.976 mm(4)
    • 11.0 mm(4)
    • 11.101 mm(2)
    • 11.3 mm(2)
    • 11.5 mm(2)
    • 11.675 mm(4)
    • 11.701 mm(1)
    • 12.0 mm(1)
    • 12.576 mm(3)
    • 12.701 mm(8)
    • 12.951 mm(4)
    • 13.0 mm(2)
    • 13.4 mm(3)
    • 14.0 mm(2)
    • 14.15 mm(3)
    • 14.275 mm(4)
    • 15.601 mm(2)
    • 15.8 mm(1)
    • 15.875 mm(5)
    • 16.0 mm(21)
    • 16.1 mm(2)
    • 16.3 mm(2)
    • 16.5 mm(3)
    • 17.0 mm(4)
    • 17.2 mm(2)
    • 17.35 mm(2)
    • 17.401 mm(1)
    • 17.475 mm(4)
    • 18.026 mm(3)
    • 19.05 mm(6)
    • 19.55 mm(1)
    • 20.0 mm(6)
    • 21.5 mm(2)
    • 21.6 mm(1)
    • 22.0 mm(8)
    • 22.225 mm(4)
    • 24.0 mm(2)
    • 25.0 mm(15)
    • 25.401 mm(20)
    • 25.8 mm(2)
    • 27.0 mm(4)
    • 28.576 mm(2)
    • 31.75 mm(27)
    • 32.0 mm(22)
    • 34.926 mm(4)
    • 35.0 mm(1)
    • 38.1 mm(16)
    • 38.875 mm(1)
    • 40.0 mm(7)
    • 41.276 mm(4)
    • 50.801 mm(4)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(3)
    • 0.265 in(1)
    • 0.276 in(2)
    • 0.28 in(4)
    • 0.288 in(4)
    • 0.325 in(1)
    • 0.351 in(5)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.406 in(2)
    • 0.424 in(1)
    • 0.432 in(4)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.445 in(2)
    • 0.453 in(2)
    • 0.46 in(4)
    • 0.461 in(1)
    • 0.473 in(1)
    • 0.495 in(3)
    • 0.5 in(8)
    • 0.51 in(4)
    • 0.512 in(2)
    • 0.528 in(3)
    • 0.551 in(2)
    • 0.557 in(3)
    • 0.562 in(4)
    • 0.614 in(2)
    • 0.622 in(1)
    • 0.625 in(5)
    • 0.63 in(21)
    • 0.634 in(2)
    • 0.642 in(2)
    • 0.65 in(3)
    • 0.669 in(4)
    • 0.677 in(2)
    • 0.683 in(2)
    • 0.685 in(1)
    • 0.689 in(4)
    • 0.71 in(3)
    • 0.75 in(6)
    • 0.77 in(1)
    • 0.787 in(6)
    • 0.846 in(2)
    • 0.85 in(1)
    • 0.866 in(8)
    • 0.875 in(4)
    • 0.946 in(2)
    • 0.984 in(15)
    • 1.0 in(20)
    • 1.016 in(2)
    • 1.063 in(4)
    • 1.125 in(2)
    • 1.25 in(27)
    • 1.26 in(22)
    • 1.375 in(4)
    • 1.379 in(1)
    • 1.5 in(16)
    • 1.532 in(1)
    • 1.575 in(7)
    • 1.625 in(4)
    • 2.0 in(4)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(87)
    • 11.175 mm(3)
    • 11.5 mm(2)
    • 12.201 mm(1)
    • 12.701 mm(4)
    • 13.0 mm(4)
    • 15.25 mm(1)
    • 16.0 mm(2)
    • 16.5 mm(3)
    • 17.0 mm(1)
    • 18.5 mm(2)
    • 18.55 mm(6)
    • 20.0 mm(5)
    • 20.326 mm(5)
    • 22.0 mm(3)
    • 22.85 mm(4)
    • 24.0 mm(3)
    • 25.401 mm(5)
    • 26.0 mm(2)
    • 27.0 mm(2)
    • 28.576 mm(5)
    • 29.0 mm(5)
    • 30.475 mm(3)
    • 31.75 mm(3)
    • 32.0 mm(3)
    • 34.0 mm(4)
    • 34.926 mm(6)
    • 36.825 mm(1)
    • 38.1 mm(5)
    • 39.0 mm(2)
    • 41.301 mm(31)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.0 mm(2)
    • 47.6 mm(31)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 54.0 mm(4)
    • 55.875 mm(3)
    • 56.625 mm(33)
    • 57.151 mm(1)
    • 57.2 mm(18)
    • 60.325 mm(2)
    • 63.5 mm(22)
    • 69.851 mm(4)
    • 70.0 mm(1)
    • 76.2 mm(8)
    • 76.95 mm(1)
    • 82.551 mm(4)
    • 88.9 mm(66)
    • 127.0 mm(1)
    • 139.701 mm(31)
    • 146.05 mm(3)
    • 174.601 mm(31)
    • 209.601 mm(20)
    • 222.3 mm(18)
    • 333.0 mm(3)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(87)
    • 0.44 in(3)
    • 0.453 in(2)
    • 0.48 in(1)
    • 0.5 in(4)
    • 0.512 in(4)
    • 0.6 in(1)
    • 0.63 in(2)
    • 0.65 in(3)
    • 0.669 in(1)
    • 0.728 in(2)
    • 0.73 in(6)
    • 0.787 in(5)
    • 0.8 in(5)
    • 0.866 in(3)
    • 0.9 in(4)
    • 0.946 in(3)
    • 1.0 in(5)
    • 1.024 in(2)
    • 1.063 in(2)
    • 1.125 in(5)
    • 1.143 in(5)
    • 1.2 in(3)
    • 1.25 in(3)
    • 1.26 in(3)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.45 in(1)
    • 1.5 in(5)
    • 1.536 in(2)
    • 1.627 in(31)
    • 1.732 in(2)
    • 1.75 in(2)
    • 1.85 in(2)
    • 1.874 in(31)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(33)
    • 2.25 in(1)
    • 2.253 in(18)
    • 2.375 in(2)
    • 2.5 in(22)
    • 2.75 in(4)
    • 2.757 in(1)
    • 3.0 in(8)
    • 3.031 in(1)
    • 3.25 in(4)
    • 3.5 in(66)
    • 5.0 in(1)
    • 5.5 in(31)
    • 5.75 in(3)
    • 6.875 in(31)
    • 8.252 in(20)
    • 8.752 in(18)
    • 13.11 in(3)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(192)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(192)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 7.0 (12)
    • 10.0 (3)
    • 14.5 (145)
    • 15.0 (12)
    • 27.0 (8)
    • 27.5 (58)
    • 30.0 (651)
    • 33.0 (8)
    • 45.0 (18)
    Countersunk Angle MinkomuCountersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (156)
    • S (130)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (105)
    • NEGATIVE-ZERO (23)
    • NEUTRAL (ZERO) (158)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.984 in(2)
    • 1.0 in(12)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.25 in(2)
    • 1.26 in(3)
    • 1.291 in(1)
    • 1.415 in(1)
    • 1.5 in(3)
    • 1.555 in(1)
    • 1.57 in(1)
    • 1.575 in(3)
    • 1.87 in(1)
    • 1.891 in(2)
    • 2.0 in(26)
    • 2.25 in(2)
    • 2.362 in(2)
    • 2.499 in(1)
    • 2.5 in(8)
    • 2.52 in(4)
    • 3.0 in(6)
    • 3.125 in(1)
    • 3.15 in(6)
    • 3.75 in(5)
    • 3.781 in(2)
    • 3.938 in(8)
    • 4.0 in(4)
    • 4.5 in(4)
    • 4.724 in(1)
    • 5.0 in(4)
    • 5.039 in(5)
    • 5.906 in(1)
    • 6.0 in(6)
    • 6.299 in(6)
    • 7.0 in(3)
    • 7.875 in(1)
    • 8.0 in(6)
    • 9.0 in(1)
    • 10.0 in(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.0 mm(2)
    • 25.401 mm(12)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 32.801 mm(1)
    • 35.95 mm(1)
    • 38.1 mm(3)
    • 39.5 mm(1)
    • 39.875 mm(1)
    • 40.0 mm(3)
    • 47.5 mm(1)
    • 48.0 mm(2)
    • 50.801 mm(26)
    • 57.151 mm(2)
    • 60.0 mm(2)
    • 63.475 mm(1)
    • 63.5 mm(8)
    • 64.0 mm(4)
    • 76.2 mm(6)
    • 79.375 mm(1)
    • 80.0 mm(6)
    • 95.25 mm(5)
    • 96.0 mm(2)
    • 100.0 mm(8)
    • 101.601 mm(4)
    • 114.301 mm(4)
    • 120.0 mm(1)
    • 127.0 mm(4)
    • 128.0 mm(5)
    • 150.0 mm(1)
    • 152.4 mm(6)
    • 160.0 mm(6)
    • 177.8 mm(3)
    • 200.0 mm(1)
    • 203.201 mm(6)
    • 228.601 mm(1)
    • 254.0 mm(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (21)
    • H (6)
    • S (95)
    frontEnd
    Clamp Style
    Clamp Style
    • C (60)
    • M (24)
    • N (198)
    • S (21)
    • Y (21)
    Cutting Width
    Cutting Width
    • 0.02 in(76)
    • 0.031 in(84)
    • 0.035 in(76)
    • 0.039 in(139)
    • 0.041 in(76)
    • 0.047 in(147)
    • 0.055 in(76)
    • 0.058 in(76)
    • 0.06 in(139)
    • 0.062 in(147)
    • 0.067 in(76)
    • 0.069 in(139)
    • 0.073 in(63)
    • 0.077 in(76)
    • 0.078 in(63)
    • 0.079 in(139)
    • 0.088 in(139)
    • 0.089 in(107)
    • 0.094 in(32)
    • 0.095 in(147)
    • 0.097 in(63)
    • 0.098 in(139)
    • 0.105 in(63)
    • 0.108 in(139)
    • 0.11 in(63)
    • 0.119 in(178)
    • 0.122 in(63)
    • 0.125 in(178)
    • 0.126 in(178)
    • 0.128 in(139)
    • 0.129 in(76)
    • 0.131 in(32)
    • 0.138 in(178)
    • 0.143 in(63)
    • 0.147 in(39)
    • 0.15 in(37)
    • 0.151 in(39)
    • 0.152 in(76)
    • 0.156 in(63)
    • 0.157 in(102)
    • 0.167 in(102)
    • 0.169 in(63)
    • 0.177 in(102)
    • 0.178 in(63)
    • 0.185 in(81)
    • 0.188 in(102)
    • 0.189 in(102)
    • 0.192 in(32)
    • 0.193 in(32)
    • 0.195 in(63)
    • 0.196 in(63)
    • 0.197 in(42)
    • 0.202 in(39)
    • 0.213 in(39)
    • 0.217 in(39)
    • 0.218 in(8)
    • 0.219 in(39)
    • 0.237 in(42)
    • 0.25 in(50)
    • 0.256 in(39)
    • 0.276 in(3)
    • 0.281 in(11)
    • 0.312 in(11)
    • 0.315 in(2)
    • 0.345 in(3)
    • 0.354 in(3)
    • 0.375 in(11)
    • 0.381 in(3)
    • 0.384 in(8)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(76)
    • 0.775 mm(84)
    • 0.8 mm(76)
    • 0.9 mm(76)
    • 1.0 mm(139)
    • 1.05 mm(76)
    • 1.201 mm(147)
    • 1.401 mm(76)
    • 1.475 mm(76)
    • 1.5 mm(139)
    • 1.576 mm(147)
    • 1.701 mm(76)
    • 1.75 mm(139)
    • 1.826 mm(63)
    • 1.951 mm(76)
    • 1.975 mm(63)
    • 2.0 mm(139)
    • 2.2 mm(139)
    • 2.225 mm(139)
    • 2.25 mm(107)
    • 2.375 mm(32)
    • 2.401 mm(147)
    • 2.475 mm(63)
    • 2.5 mm(139)
    • 2.676 mm(63)
    • 2.75 mm(139)
    • 2.801 mm(63)
    • 3.0 mm(178)
    • 3.1 mm(63)
    • 3.176 mm(178)
    • 3.2 mm(178)
    • 3.25 mm(139)
    • 3.276 mm(76)
    • 3.325 mm(32)
    • 3.5 mm(178)
    • 3.6 mm(63)
    • 3.725 mm(39)
    • 3.801 mm(37)
    • 3.825 mm(39)
    • 3.85 mm(76)
    • 3.95 mm(63)
    • 3.975 mm(32)
    • 4.0 mm(102)
    • 4.25 mm(102)
    • 4.3 mm(63)
    • 4.5 mm(102)
    • 4.525 mm(63)
    • 4.7 mm(81)
    • 4.775 mm(102)
    • 4.801 mm(102)
    • 4.875 mm(32)
    • 4.9 mm(32)
    • 4.95 mm(63)
    • 4.976 mm(63)
    • 5.0 mm(42)
    • 5.125 mm(39)
    • 5.4 mm(39)
    • 5.5 mm(39)
    • 5.525 mm(8)
    • 5.575 mm(39)
    • 6.0 mm(42)
    • 6.351 mm(50)
    • 6.5 mm(39)
    • 7.0 mm(3)
    • 7.125 mm(11)
    • 7.926 mm(11)
    • 8.0 mm(2)
    • 8.75 mm(3)
    • 9.0 mm(3)
    • 9.525 mm(11)
    • 9.675 mm(3)
    • 9.75 mm(8)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (492)
    • TN-TOP NOTCH (748)
    Insert Size
    Insert Size
    • 1 (8)
    • 2 (49)
    • 3 (36)
    • 4 (19)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(11)
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.13 in(1)
    • 0.138 in(40)
    • 0.21 in(39)
    • 0.24 in(2)
    • 0.25 in(2)
    • 0.293 in(8)
    • 0.294 in(15)
    • 0.3 in(1)
    • 0.334 in(4)
    • 0.416 in(3)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(11)
    • 1.026 mm(1)
    • 1.6 mm(2)
    • 1.701 mm(1)
    • 1.776 mm(2)
    • 1.901 mm(1)
    • 3.301 mm(1)
    • 3.5 mm(40)
    • 5.325 mm(39)
    • 6.101 mm(2)
    • 6.351 mm(2)
    • 7.45 mm(8)
    • 7.476 mm(15)
    • 7.625 mm(1)
    • 8.475 mm(4)
    • 10.55 mm(3)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Thread TPI
    Thread TPI
    • 2.0 (7)
    • 2.5 (2)
    • 3.0 (4)
    • 4.0 (39)
    • 5.0 (30)
    • 6.0 (36)
    • 7.0 (9)
    • 8.0 (69)
    • 9.0 (2)
    • 10.0 (32)
    • 11.0 (15)
    • 11.5 (12)
    • 12.0 (53)
    • 13.0 (2)
    • 14.0 (54)
    • 16.0 (70)
    • 18.0 (30)
    • 19.0 (5)
    • 20.0 (36)
    • 24.0 (28)
    • 27.0 (2)
    • 28.0 (18)
    • 32.0 (18)
    • 36.0 (1)
    • 40.0 (2)
    • 48.0 (29)
    Thread TPI MinkomuThread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.351 mm(1)
    • 0.4 mm(1)
    • 0.5 mm(7)
    • 0.75 mm(7)
    • 0.8 mm(1)
    • 1.0 mm(13)
    • 1.25 mm(9)
    • 1.5 mm(33)
    • 1.75 mm(7)
    • 2.0 mm(19)
    • 2.5 mm(8)
    • 3.0 mm(32)
    • 3.5 mm(3)
    • 4.0 mm(4)
    • 4.5 mm(2)
    • 5.0 mm(10)
    • 6.25 mm(3)
    Thread Pitch MinkomuThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.014 in(1)
    • 0.016 in(1)
    • 0.02 in(7)
    • 0.03 in(7)
    • 0.031 in(1)
    • 0.039 in(13)
    • 0.049 in(9)
    • 0.06 in(33)
    • 0.069 in(7)
    • 0.079 in(19)
    • 0.098 in(8)
    • 0.119 in(32)
    • 0.138 in(3)
    • 0.157 in(4)
    • 0.177 in(2)
    • 0.197 in(10)
    • 0.246 in(3)
    Thread Pitch MinkomuThread Pitch Max
    insertGeometry
    Shape
    Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (366)
    • TN-TOP NOTCH (549)
    Insert IC Size
    Insert IC Size
    • 4.0 mm(1)
    • 4.75 mm(3)
    • 5.0 mm(7)
    • 6.351 mm(44)
    • 9.525 mm(269)
    • 12.701 mm(41)
    • 15.875 mm(4)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.157 in(1)
    • 0.187 in(3)
    • 0.197 in(7)
    • 0.25 in(44)
    • 0.375 in(269)
    • 0.5 in(41)
    • 0.625 in(4)
    Insert IC Size MinkomuInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 1 (6)
    • 11 (1)
    • 16 (3)
    • 2 (78)
    • 3 (379)
    • 4 (65)
    • 4U (3)
    • 6 (15)
    • 8 (11)
    Cutting Edge Length
    Cutting Edge Length
    • 6.926 mm(1)
    • 8.65 mm(7)
    • 11.0 mm(1)
    • 16.5 mm(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.273 in(1)
    • 0.341 in(7)
    • 0.433 in(1)
    • 0.65 in(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • B H (102)
    • B L (63)
    • C N (102)
    • D P (84)
    • H T (178)
    • H W (1240)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (115)
    • BORING BAR HEAD (7)
    • SQUARE SHANK (147)
    • TAPER SHANK (17)
    System Size
    System Size
    • KM25 (17)
    Back-End Diameter
    Back-End Diameter
    • 7.9 mm(1)
    • 9.5 mm(1)
    • 9.525 mm(3)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.701 mm(9)
    • 15.875 mm(8)
    • 16.0 mm(6)
    • 19.05 mm(15)
    • 20.0 mm(14)
    • 25.0 mm(26)
    • 25.401 mm(8)
    • 31.75 mm(8)
    • 32.0 mm(7)
    • 38.1 mm(2)
    • 40.0 mm(6)
    • 44.45 mm(3)
    • 50.0 mm(1)
    • 50.801 mm(6)
    • 57.151 mm(1)
    • 63.5 mm(8)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.311 in(1)
    • 0.374 in(1)
    • 0.375 in(3)
    • 0.394 in(3)
    • 0.473 in(3)
    • 0.5 in(9)
    • 0.625 in(8)
    • 0.63 in(6)
    • 0.75 in(15)
    • 0.787 in(14)
    • 0.984 in(26)
    • 1.0 in(8)
    • 1.25 in(8)
    • 1.26 in(7)
    • 1.5 in(2)
    • 1.575 in(6)
    • 1.75 in(3)
    • 1.969 in(1)
    • 2.0 in(6)
    • 2.25 in(1)
    • 2.5 in(8)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(5)
    • 0.5 in(8)
    • 0.584 in(2)
    • 0.606 in(2)
    • 0.625 in(8)
    • 0.63 in(8)
    • 0.741 in(11)
    • 0.75 in(16)
    • 0.764 in(1)
    • 0.787 in(11)
    • 0.939 in(5)
    • 0.961 in(1)
    • 0.984 in(21)
    • 1.0 in(28)
    • 1.214 in(7)
    • 1.25 in(15)
    • 1.26 in(16)
    • 1.5 in(4)
    • 1.53 in(6)
    • 1.848 in(1)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(5)
    • 12.701 mm(8)
    • 14.826 mm(2)
    • 15.4 mm(2)
    • 15.875 mm(8)
    • 16.0 mm(8)
    • 18.825 mm(11)
    • 19.05 mm(16)
    • 19.401 mm(1)
    • 20.0 mm(11)
    • 23.826 mm(5)
    • 24.401 mm(1)
    • 25.0 mm(21)
    • 25.401 mm(28)
    • 30.826 mm(7)
    • 31.75 mm(15)
    • 32.0 mm(16)
    • 38.1 mm(4)
    • 38.825 mm(6)
    • 46.95 mm(1)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(5)
    • 0.5 in(8)
    • 0.625 in(8)
    • 0.63 in(8)
    • 0.75 in(16)
    • 0.787 in(12)
    • 0.864 in(5)
    • 0.984 in(23)
    • 1.0 in(28)
    • 1.141 in(7)
    • 1.25 in(15)
    • 1.26 in(13)
    • 1.455 in(6)
    • 1.5 in(4)
    • 1.848 in(1)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(5)
    • 12.701 mm(8)
    • 15.875 mm(8)
    • 16.0 mm(8)
    • 19.05 mm(16)
    • 20.0 mm(12)
    • 21.951 mm(5)
    • 25.0 mm(23)
    • 25.401 mm(28)
    • 28.951 mm(7)
    • 31.75 mm(15)
    • 32.0 mm(13)
    • 36.95 mm(6)
    • 38.1 mm(4)
    • 46.95 mm(1)
    Shank Width MinkomuShank Width Max
    No filters matching ""

    Závitování Top Notch™

    (737)Závitování Top Notch™

    Závitování LT

    (486)Závitování LT

    KM – Závitování

    (17)KM – Závitování
    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (1186)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1186)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1186)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1186)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1186)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1186)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1186)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1186)
      • M Stainless Steel (1186)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1186)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1186)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1186)
      • K Cast Iron (1066)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1066)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1066)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1066)
      • N Non-Ferrous Materials (599)
        • N1
          Wrought Aluminum (599)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(559)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(75)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (599)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (559)
        • N6
          Carbon, Graphite Composites, CFRP (559)
        • N7
          MMC's (16)
      • S High-Temp Alloys (1179)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1179)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1179)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1179)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1179)
      • H Hardened Materials (346)
        • H1
          Hardened Materials 44-48 HRC(346)
        • H2
          Hardened Materials 48-55 HRC(247)
        • H3
          Hardened Materials 56-60 HRC(106)
        • H4
          Hardened Materials >60 HRC(106)
      Vybrat první volbu
      • DE (63)
      • GB (41)
      • SG (36)
      Applications
      Applications
      • Chamfer TurningChamfer Turning (4)
      • Cut-OffCut-Off (4)
      • Deep GroovingDeep Grooving (4)
      • Face GroovingFace Grooving (191)
      • FacingFacing (4)
      • GroovingGrooving (134)
      • ID GroovingID Grooving (69)
      • ID Thread TurningID Thread Turning (681)
      • Multiple Direction CuttingMultiple Direction Cutting (4)
      • OD Thread TurningOD Thread Turning (924)
      • Plunge TurningPlunge Turning (4)
      • ProfilingProfiling (4)
      • ThreadingThreading (205)
      • TurningTurning (4)
      Type of Thread
      Type of Thread
      • 55 (136)
      • 60 (449)
      • ACME (316)
      • API (163)
      • API BUTTRESS (38)
      • API RD (162)
      • BSPT (95)
      • BSW (231)
      • BUTTRESS (208)
      • M (324)
      • NPT (185)
      • NPTF (95)
      • RD DIN 405 (116)
      • STUB ACME (226)
      • TR DIN 103 (120)
      • UN (508)
      • UNJ (270)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (191)
      • Lightly Interrupted Cut (191)
      • Smooth Cut (192)
      • Varying Depth of Cut (192)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (325)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Bolt-On Head (7)
      • Boring Bar Shank (115)
      • KM (17)
      • Toolholder (147)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (190)
      • 2.0 (727)
      • 3.0 (492)
      • 4.0 (5)
      Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.181 in(17)
      • 1.625 in(7)
      • 2.165 in(1)
      • 2.192 in(1)
      • 2.362 in(1)
      • 2.5 in(4)
      • 2.757 in(2)
      • 3.15 in(2)
      • 3.25 in(2)
      • 3.346 in(2)
      • 3.5 in(4)
      • 3.938 in(10)
      • 4.0 in(3)
      • 4.5 in(14)
      • 4.921 in(14)
      • 5.0 in(25)
      • 5.906 in(32)
      • 5.984 in(2)
      • 5.996 in(1)
      • 6.0 in(52)
      • 6.024 in(1)
      • 6.063 in(2)
      • 6.102 in(3)
      • 6.694 in(15)
      • 6.891 in(4)
      • 7.0 in(11)
      • 7.008 in(2)
      • 7.079 in(2)
      • 7.087 in(11)
      • 7.875 in(9)
      • 7.931 in(1)
      • 7.976 in(1)
      • 8.0 in(7)
      • 8.058 in(2)
      • 8.082 in(1)
      • 9.843 in(8)
      • 9.879 in(1)
      • 10.0 in(18)
      • 11.811 in(6)
      • 12.0 in(8)
      • 13.781 in(1)
      • 14.0 in(7)
      • 16.0 in(8)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 30.0 mm(17)
      • 41.276 mm(7)
      • 55.0 mm(1)
      • 55.676 mm(1)
      • 60.0 mm(1)
      • 63.5 mm(4)
      • 70.0 mm(2)
      • 80.0 mm(2)
      • 82.551 mm(2)
      • 85.0 mm(2)
      • 88.9 mm(4)
      • 100.0 mm(10)
      • 101.601 mm(3)
      • 114.301 mm(14)
      • 125.0 mm(14)
      • 127.0 mm(25)
      • 150.0 mm(32)
      • 152.0 mm(2)
      • 152.3 mm(1)
      • 152.4 mm(52)
      • 153.0 mm(1)
      • 154.0 mm(2)
      • 155.0 mm(3)
      • 170.0 mm(15)
      • 175.0 mm(4)
      • 177.8 mm(11)
      • 178.0 mm(2)
      • 179.8 mm(2)
      • 180.0 mm(11)
      • 200.0 mm(9)
      • 201.425 mm(1)
      • 202.601 mm(1)
      • 203.201 mm(7)
      • 204.675 mm(2)
      • 205.275 mm(1)
      • 250.0 mm(8)
      • 250.925 mm(1)
      • 254.0 mm(18)
      • 300.0 mm(6)
      • 304.8 mm(8)
      • 350.0 mm(1)
      • 355.6 mm(7)
      • 406.401 mm(8)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.001 in(25)
      • 0.002 in(175)
      • 0.003 in(348)
      • 0.004 in(241)
      • 0.005 in(116)
      • 0.006 in(187)
      • 0.007 in(274)
      • 0.008 in(281)
      • 0.01 in(228)
      • 0.011 in(126)
      • 0.012 in(83)
      • 0.014 in(174)
      • 0.015 in(30)
      • 0.016 in(82)
      • 0.017 in(37)
      • 0.019 in(108)
      • 0.02 in(149)
      • 0.021 in(25)
      • 0.023 in(109)
      • 0.027 in(3)
      • 0.028 in(17)
      • 0.03 in(107)
      • 0.031 in(139)
      • 0.033 in(11)
      • 0.035 in(106)
      • 0.037 in(9)
      • 0.038 in(1)
      • 0.039 in(155)
      • 0.047 in(139)
      • 0.049 in(139)
      • 0.06 in(140)
      • 0.062 in(63)
      • 0.063 in(178)
      • 0.069 in(139)
      • 0.078 in(63)
      • 0.079 in(102)
      • 0.089 in(102)
      • 0.095 in(102)
      • 0.098 in(39)
      • 0.125 in(39)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.025 mm(25)
      • 0.05 mm(175)
      • 0.076 mm(348)
      • 0.1 mm(241)
      • 0.125 mm(116)
      • 0.151 mm(187)
      • 0.176 mm(274)
      • 0.2 mm(281)
      • 0.225 mm(114)
      • 0.25 mm(179)
      • 0.275 mm(126)
      • 0.301 mm(83)
      • 0.325 mm(156)
      • 0.351 mm(120)
      • 0.375 mm(30)
      • 0.4 mm(82)
      • 0.426 mm(37)
      • 0.45 mm(107)
      • 0.476 mm(33)
      • 0.5 mm(149)
      • 0.525 mm(25)
      • 0.576 mm(109)
      • 0.65 mm(3)
      • 0.701 mm(17)
      • 0.75 mm(107)
      • 0.775 mm(139)
      • 0.826 mm(11)
      • 0.9 mm(106)
      • 0.925 mm(9)
      • 0.976 mm(1)
      • 1.0 mm(155)
      • 1.201 mm(139)
      • 1.25 mm(139)
      • 1.5 mm(139)
      • 1.526 mm(1)
      • 1.576 mm(63)
      • 1.6 mm(178)
      • 1.75 mm(139)
      • 1.975 mm(63)
      • 2.0 mm(102)
      • 2.25 mm(102)
      • 2.401 mm(102)
      • 2.5 mm(39)
      • 3.176 mm(39)
      Corner Radius MinkomuCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(917)
      Corner Chamfer MinkomuCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(917)
      Corner Chamfer MinkomuCorner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • K00331 (46)
      • K1 (8)
      • K2885 (139)
      • K313 (185)
      • K420 (202)
      • K4H (100)
      • K68 (277)
      • KB1345 (102)
      • KB1630 (102)
      • KB5625 (63)
      • KBH20 (32)
      • KC250 (147)
      • KC5010 (455)
      • KC5025 (758)
      • KC5410 (179)
      • KC710 (245)
      • KC720 (300)
      • KC722 (231)
      • KC730 (388)
      • KC732 (63)
      • KC810 (197)
      • KC850 (234)
      • KC910 (100)
      • KC9105 (1)
      • KC9110 (178)
      • KC9120 (63)
      • KC9320 (178)
      • KC935 (178)
      • KC950 (178)
      • KCK20 (139)
      • KCK20B (178)
      • KCP10B (178)
      • KCP25B (178)
      • KCU10 (268)
      • KCU10B (178)
      • KCU25 (270)
      • KD050 (32)
      • KD081 (63)
      • KD100 (84)
      • KD120 (102)
      • KD1425 (63)
      • KT175 (139)
      • KT315 (178)
      • KU10T (178)
      • KU25T (231)
      • KU30T (178)
      • KY3000 (102)
      • PN120 (2)
      • SP4066 (10)
      • THM (8)
      • TN10P (8)
      • TN6010 (11)
      • TN6025 (17)
      • TN7110 (11)
      • TTS (2)
      • WU10HT (2)
      • WU10PT (5)
      • WU25PT (2)
      Hand Of Tool
      Hand Of Tool
      • L (116)
      • R (170)
      Wiper Insert
      Wiper Insert
      • N (1238)
      F Dimension
      F Dimension
      • 6.551 mm(3)
      • 6.726 mm(1)
      • 7.0 mm(2)
      • 7.101 mm(4)
      • 7.301 mm(4)
      • 8.25 mm(1)
      • 8.9 mm(5)
      • 9.525 mm(2)
      • 10.0 mm(1)
      • 10.3 mm(2)
      • 10.775 mm(1)
      • 10.976 mm(4)
      • 11.0 mm(4)
      • 11.101 mm(2)
      • 11.3 mm(2)
      • 11.5 mm(2)
      • 11.675 mm(4)
      • 11.701 mm(1)
      • 12.0 mm(1)
      • 12.576 mm(3)
      • 12.701 mm(8)
      • 12.951 mm(4)
      • 13.0 mm(2)
      • 13.4 mm(3)
      • 14.0 mm(2)
      • 14.15 mm(3)
      • 14.275 mm(4)
      • 15.601 mm(2)
      • 15.8 mm(1)
      • 15.875 mm(5)
      • 16.0 mm(21)
      • 16.1 mm(2)
      • 16.3 mm(2)
      • 16.5 mm(3)
      • 17.0 mm(4)
      • 17.2 mm(2)
      • 17.35 mm(2)
      • 17.401 mm(1)
      • 17.475 mm(4)
      • 18.026 mm(3)
      • 19.05 mm(6)
      • 19.55 mm(1)
      • 20.0 mm(6)
      • 21.5 mm(2)
      • 21.6 mm(1)
      • 22.0 mm(8)
      • 22.225 mm(4)
      • 24.0 mm(2)
      • 25.0 mm(15)
      • 25.401 mm(20)
      • 25.8 mm(2)
      • 27.0 mm(4)
      • 28.576 mm(2)
      • 31.75 mm(27)
      • 32.0 mm(22)
      • 34.926 mm(4)
      • 35.0 mm(1)
      • 38.1 mm(16)
      • 38.875 mm(1)
      • 40.0 mm(7)
      • 41.276 mm(4)
      • 50.801 mm(4)
      F Dimension MinkomuF Dimension Max
      F Dimension
      F Dimension
      • 0.258 in(3)
      • 0.265 in(1)
      • 0.276 in(2)
      • 0.28 in(4)
      • 0.288 in(4)
      • 0.325 in(1)
      • 0.351 in(5)
      • 0.375 in(2)
      • 0.394 in(1)
      • 0.406 in(2)
      • 0.424 in(1)
      • 0.432 in(4)
      • 0.433 in(4)
      • 0.437 in(2)
      • 0.445 in(2)
      • 0.453 in(2)
      • 0.46 in(4)
      • 0.461 in(1)
      • 0.473 in(1)
      • 0.495 in(3)
      • 0.5 in(8)
      • 0.51 in(4)
      • 0.512 in(2)
      • 0.528 in(3)
      • 0.551 in(2)
      • 0.557 in(3)
      • 0.562 in(4)
      • 0.614 in(2)
      • 0.622 in(1)
      • 0.625 in(5)
      • 0.63 in(21)
      • 0.634 in(2)
      • 0.642 in(2)
      • 0.65 in(3)
      • 0.669 in(4)
      • 0.677 in(2)
      • 0.683 in(2)
      • 0.685 in(1)
      • 0.689 in(4)
      • 0.71 in(3)
      • 0.75 in(6)
      • 0.77 in(1)
      • 0.787 in(6)
      • 0.846 in(2)
      • 0.85 in(1)
      • 0.866 in(8)
      • 0.875 in(4)
      • 0.946 in(2)
      • 0.984 in(15)
      • 1.0 in(20)
      • 1.016 in(2)
      • 1.063 in(4)
      • 1.125 in(2)
      • 1.25 in(27)
      • 1.26 in(22)
      • 1.375 in(4)
      • 1.379 in(1)
      • 1.5 in(16)
      • 1.532 in(1)
      • 1.575 in(7)
      • 1.625 in(4)
      • 2.0 in(4)
      F Dimension MinkomuF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 mm(87)
      • 11.175 mm(3)
      • 11.5 mm(2)
      • 12.201 mm(1)
      • 12.701 mm(4)
      • 13.0 mm(4)
      • 15.25 mm(1)
      • 16.0 mm(2)
      • 16.5 mm(3)
      • 17.0 mm(1)
      • 18.5 mm(2)
      • 18.55 mm(6)
      • 20.0 mm(5)
      • 20.326 mm(5)
      • 22.0 mm(3)
      • 22.85 mm(4)
      • 24.0 mm(3)
      • 25.401 mm(5)
      • 26.0 mm(2)
      • 27.0 mm(2)
      • 28.576 mm(5)
      • 29.0 mm(5)
      • 30.475 mm(3)
      • 31.75 mm(3)
      • 32.0 mm(3)
      • 34.0 mm(4)
      • 34.926 mm(6)
      • 36.825 mm(1)
      • 38.1 mm(5)
      • 39.0 mm(2)
      • 41.301 mm(31)
      • 44.0 mm(2)
      • 44.45 mm(2)
      • 47.0 mm(2)
      • 47.6 mm(31)
      • 50.0 mm(2)
      • 50.801 mm(2)
      • 54.0 mm(4)
      • 55.875 mm(3)
      • 56.625 mm(33)
      • 57.151 mm(1)
      • 57.2 mm(18)
      • 60.325 mm(2)
      • 63.5 mm(22)
      • 69.851 mm(4)
      • 70.0 mm(1)
      • 76.2 mm(8)
      • 76.95 mm(1)
      • 82.551 mm(4)
      • 88.9 mm(66)
      • 127.0 mm(1)
      • 139.701 mm(31)
      • 146.05 mm(3)
      • 174.601 mm(31)
      • 209.601 mm(20)
      • 222.3 mm(18)
      • 333.0 mm(3)
      Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 in(87)
      • 0.44 in(3)
      • 0.453 in(2)
      • 0.48 in(1)
      • 0.5 in(4)
      • 0.512 in(4)
      • 0.6 in(1)
      • 0.63 in(2)
      • 0.65 in(3)
      • 0.669 in(1)
      • 0.728 in(2)
      • 0.73 in(6)
      • 0.787 in(5)
      • 0.8 in(5)
      • 0.866 in(3)
      • 0.9 in(4)
      • 0.946 in(3)
      • 1.0 in(5)
      • 1.024 in(2)
      • 1.063 in(2)
      • 1.125 in(5)
      • 1.143 in(5)
      • 1.2 in(3)
      • 1.25 in(3)
      • 1.26 in(3)
      • 1.339 in(4)
      • 1.375 in(6)
      • 1.45 in(1)
      • 1.5 in(5)
      • 1.536 in(2)
      • 1.627 in(31)
      • 1.732 in(2)
      • 1.75 in(2)
      • 1.85 in(2)
      • 1.874 in(31)
      • 1.969 in(2)
      • 2.0 in(2)
      • 2.126 in(4)
      • 2.2 in(3)
      • 2.229 in(33)
      • 2.25 in(1)
      • 2.253 in(18)
      • 2.375 in(2)
      • 2.5 in(22)
      • 2.75 in(4)
      • 2.757 in(1)
      • 3.0 in(8)
      • 3.031 in(1)
      • 3.25 in(4)
      • 3.5 in(66)
      • 5.0 in(1)
      • 5.5 in(31)
      • 5.75 in(3)
      • 6.875 in(31)
      • 8.252 in(20)
      • 8.752 in(18)
      • 13.11 in(3)
      Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 393.661 in(192)
      Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 9999.0 mm(192)
      Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
      Countersunk Angle
      Countersunk Angle
      • 7.0 (12)
      • 10.0 (3)
      • 14.5 (145)
      • 15.0 (12)
      • 27.0 (8)
      • 27.5 (58)
      • 30.0 (651)
      • 33.0 (8)
      • 45.0 (18)
      Countersunk Angle MinkomuCountersunk Angle Max
      Cutting Direction
      Cutting Direction
      • E (156)
      • S (130)
      Rake Angle Style
      Rake Angle Style
      • DOUBLE NEGATIVE (105)
      • NEGATIVE-ZERO (23)
      • NEUTRAL (ZERO) (158)
      Maximum Bore Depth
      Maximum Bore Depth
      • 0.984 in(2)
      • 1.0 in(12)
      • 1.23 in(1)
      • 1.232 in(1)
      • 1.25 in(2)
      • 1.26 in(3)
      • 1.291 in(1)
      • 1.415 in(1)
      • 1.5 in(3)
      • 1.555 in(1)
      • 1.57 in(1)
      • 1.575 in(3)
      • 1.87 in(1)
      • 1.891 in(2)
      • 2.0 in(26)
      • 2.25 in(2)
      • 2.362 in(2)
      • 2.499 in(1)
      • 2.5 in(8)
      • 2.52 in(4)
      • 3.0 in(6)
      • 3.125 in(1)
      • 3.15 in(6)
      • 3.75 in(5)
      • 3.781 in(2)
      • 3.938 in(8)
      • 4.0 in(4)
      • 4.5 in(4)
      • 4.724 in(1)
      • 5.0 in(4)
      • 5.039 in(5)
      • 5.906 in(1)
      • 6.0 in(6)
      • 6.299 in(6)
      • 7.0 in(3)
      • 7.875 in(1)
      • 8.0 in(6)
      • 9.0 in(1)
      • 10.0 in(8)
      Maximum Bore Depth MinkomuMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 25.0 mm(2)
      • 25.401 mm(12)
      • 31.25 mm(1)
      • 31.3 mm(1)
      • 31.75 mm(2)
      • 32.0 mm(3)
      • 32.801 mm(1)
      • 35.95 mm(1)
      • 38.1 mm(3)
      • 39.5 mm(1)
      • 39.875 mm(1)
      • 40.0 mm(3)
      • 47.5 mm(1)
      • 48.0 mm(2)
      • 50.801 mm(26)
      • 57.151 mm(2)
      • 60.0 mm(2)
      • 63.475 mm(1)
      • 63.5 mm(8)
      • 64.0 mm(4)
      • 76.2 mm(6)
      • 79.375 mm(1)
      • 80.0 mm(6)
      • 95.25 mm(5)
      • 96.0 mm(2)
      • 100.0 mm(8)
      • 101.601 mm(4)
      • 114.301 mm(4)
      • 120.0 mm(1)
      • 127.0 mm(4)
      • 128.0 mm(5)
      • 150.0 mm(1)
      • 152.4 mm(6)
      • 160.0 mm(6)
      • 177.8 mm(3)
      • 200.0 mm(1)
      • 203.201 mm(6)
      • 228.601 mm(1)
      • 254.0 mm(8)
      Maximum Bore Depth MinkomuMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • C (21)
      • H (6)
      • S (95)
      frontEnd
      Clamp Style
      Clamp Style
      • C (60)
      • M (24)
      • N (198)
      • S (21)
      • Y (21)
      Cutting Width
      Cutting Width
      • 0.02 in(76)
      • 0.031 in(84)
      • 0.035 in(76)
      • 0.039 in(139)
      • 0.041 in(76)
      • 0.047 in(147)
      • 0.055 in(76)
      • 0.058 in(76)
      • 0.06 in(139)
      • 0.062 in(147)
      • 0.067 in(76)
      • 0.069 in(139)
      • 0.073 in(63)
      • 0.077 in(76)
      • 0.078 in(63)
      • 0.079 in(139)
      • 0.088 in(139)
      • 0.089 in(107)
      • 0.094 in(32)
      • 0.095 in(147)
      • 0.097 in(63)
      • 0.098 in(139)
      • 0.105 in(63)
      • 0.108 in(139)
      • 0.11 in(63)
      • 0.119 in(178)
      • 0.122 in(63)
      • 0.125 in(178)
      • 0.126 in(178)
      • 0.128 in(139)
      • 0.129 in(76)
      • 0.131 in(32)
      • 0.138 in(178)
      • 0.143 in(63)
      • 0.147 in(39)
      • 0.15 in(37)
      • 0.151 in(39)
      • 0.152 in(76)
      • 0.156 in(63)
      • 0.157 in(102)
      • 0.167 in(102)
      • 0.169 in(63)
      • 0.177 in(102)
      • 0.178 in(63)
      • 0.185 in(81)
      • 0.188 in(102)
      • 0.189 in(102)
      • 0.192 in(32)
      • 0.193 in(32)
      • 0.195 in(63)
      • 0.196 in(63)
      • 0.197 in(42)
      • 0.202 in(39)
      • 0.213 in(39)
      • 0.217 in(39)
      • 0.218 in(8)
      • 0.219 in(39)
      • 0.237 in(42)
      • 0.25 in(50)
      • 0.256 in(39)
      • 0.276 in(3)
      • 0.281 in(11)
      • 0.312 in(11)
      • 0.315 in(2)
      • 0.345 in(3)
      • 0.354 in(3)
      • 0.375 in(11)
      • 0.381 in(3)
      • 0.384 in(8)
      Cutting Width MinkomuCutting Width Max
      Cutting Width
      Cutting Width
      • 0.5 mm(76)
      • 0.775 mm(84)
      • 0.8 mm(76)
      • 0.9 mm(76)
      • 1.0 mm(139)
      • 1.05 mm(76)
      • 1.201 mm(147)
      • 1.401 mm(76)
      • 1.475 mm(76)
      • 1.5 mm(139)
      • 1.576 mm(147)
      • 1.701 mm(76)
      • 1.75 mm(139)
      • 1.826 mm(63)
      • 1.951 mm(76)
      • 1.975 mm(63)
      • 2.0 mm(139)
      • 2.2 mm(139)
      • 2.225 mm(139)
      • 2.25 mm(107)
      • 2.375 mm(32)
      • 2.401 mm(147)
      • 2.475 mm(63)
      • 2.5 mm(139)
      • 2.676 mm(63)
      • 2.75 mm(139)
      • 2.801 mm(63)
      • 3.0 mm(178)
      • 3.1 mm(63)
      • 3.176 mm(178)
      • 3.2 mm(178)
      • 3.25 mm(139)
      • 3.276 mm(76)
      • 3.325 mm(32)
      • 3.5 mm(178)
      • 3.6 mm(63)
      • 3.725 mm(39)
      • 3.801 mm(37)
      • 3.825 mm(39)
      • 3.85 mm(76)
      • 3.95 mm(63)
      • 3.975 mm(32)
      • 4.0 mm(102)
      • 4.25 mm(102)
      • 4.3 mm(63)
      • 4.5 mm(102)
      • 4.525 mm(63)
      • 4.7 mm(81)
      • 4.775 mm(102)
      • 4.801 mm(102)
      • 4.875 mm(32)
      • 4.9 mm(32)
      • 4.95 mm(63)
      • 4.976 mm(63)
      • 5.0 mm(42)
      • 5.125 mm(39)
      • 5.4 mm(39)
      • 5.5 mm(39)
      • 5.525 mm(8)
      • 5.575 mm(39)
      • 6.0 mm(42)
      • 6.351 mm(50)
      • 6.5 mm(39)
      • 7.0 mm(3)
      • 7.125 mm(11)
      • 7.926 mm(11)
      • 8.0 mm(2)
      • 8.75 mm(3)
      • 9.0 mm(3)
      • 9.525 mm(11)
      • 9.675 mm(3)
      • 9.75 mm(8)
      Cutting Width MinkomuCutting Width Max
      Insert Shape
      Insert Shape
      • LT-TRIANGLE LAY DOWN THREAD 60 (492)
      • TN-TOP NOTCH (748)
      Insert Size
      Insert Size
      • 1 (8)
      • 2 (49)
      • 3 (36)
      • 4 (19)
      • 6 (2)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.0 in(11)
      • 0.04 in(1)
      • 0.063 in(2)
      • 0.067 in(1)
      • 0.07 in(2)
      • 0.075 in(1)
      • 0.13 in(1)
      • 0.138 in(40)
      • 0.21 in(39)
      • 0.24 in(2)
      • 0.25 in(2)
      • 0.293 in(8)
      • 0.294 in(15)
      • 0.3 in(1)
      • 0.334 in(4)
      • 0.416 in(3)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.0 mm(11)
      • 1.026 mm(1)
      • 1.6 mm(2)
      • 1.701 mm(1)
      • 1.776 mm(2)
      • 1.901 mm(1)
      • 3.301 mm(1)
      • 3.5 mm(40)
      • 5.325 mm(39)
      • 6.101 mm(2)
      • 6.351 mm(2)
      • 7.45 mm(8)
      • 7.476 mm(15)
      • 7.625 mm(1)
      • 8.475 mm(4)
      • 10.55 mm(3)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      Thread TPI
      Thread TPI
      • 2.0 (7)
      • 2.5 (2)
      • 3.0 (4)
      • 4.0 (39)
      • 5.0 (30)
      • 6.0 (36)
      • 7.0 (9)
      • 8.0 (69)
      • 9.0 (2)
      • 10.0 (32)
      • 11.0 (15)
      • 11.5 (12)
      • 12.0 (53)
      • 13.0 (2)
      • 14.0 (54)
      • 16.0 (70)
      • 18.0 (30)
      • 19.0 (5)
      • 20.0 (36)
      • 24.0 (28)
      • 27.0 (2)
      • 28.0 (18)
      • 32.0 (18)
      • 36.0 (1)
      • 40.0 (2)
      • 48.0 (29)
      Thread TPI MinkomuThread TPI Max
      Thread Pitch
      Thread Pitch
      • 0.351 mm(1)
      • 0.4 mm(1)
      • 0.5 mm(7)
      • 0.75 mm(7)
      • 0.8 mm(1)
      • 1.0 mm(13)
      • 1.25 mm(9)
      • 1.5 mm(33)
      • 1.75 mm(7)
      • 2.0 mm(19)
      • 2.5 mm(8)
      • 3.0 mm(32)
      • 3.5 mm(3)
      • 4.0 mm(4)
      • 4.5 mm(2)
      • 5.0 mm(10)
      • 6.25 mm(3)
      Thread Pitch MinkomuThread Pitch Max
      Thread Pitch
      Thread Pitch
      • 0.014 in(1)
      • 0.016 in(1)
      • 0.02 in(7)
      • 0.03 in(7)
      • 0.031 in(1)
      • 0.039 in(13)
      • 0.049 in(9)
      • 0.06 in(33)
      • 0.069 in(7)
      • 0.079 in(19)
      • 0.098 in(8)
      • 0.119 in(32)
      • 0.138 in(3)
      • 0.157 in(4)
      • 0.177 in(2)
      • 0.197 in(10)
      • 0.246 in(3)
      Thread Pitch MinkomuThread Pitch Max
      insertGeometry
      Shape
      Shape
      • LT-TRIANGLE LAY DOWN THREAD 60 (366)
      • TN-TOP NOTCH (549)
      Insert IC Size
      Insert IC Size
      • 4.0 mm(1)
      • 4.75 mm(3)
      • 5.0 mm(7)
      • 6.351 mm(44)
      • 9.525 mm(269)
      • 12.701 mm(41)
      • 15.875 mm(4)
      Insert IC Size MinkomuInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.157 in(1)
      • 0.187 in(3)
      • 0.197 in(7)
      • 0.25 in(44)
      • 0.375 in(269)
      • 0.5 in(41)
      • 0.625 in(4)
      Insert IC Size MinkomuInsert IC Size Max
      Insert Seat Size
      Insert Seat Size
      • 1 (6)
      • 11 (1)
      • 16 (3)
      • 2 (78)
      • 3 (379)
      • 4 (65)
      • 4U (3)
      • 6 (15)
      • 8 (11)
      Cutting Edge Length
      Cutting Edge Length
      • 6.926 mm(1)
      • 8.65 mm(7)
      • 11.0 mm(1)
      • 16.5 mm(3)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.273 in(1)
      • 0.341 in(7)
      • 0.433 in(1)
      • 0.65 in(3)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Tool Material
      Cutting Tool Material
      • B H (102)
      • B L (63)
      • C N (102)
      • D P (84)
      • H T (178)
      • H W (1240)
      backEnd
      Connection Type
      Connection Type
      • BORING BAR (115)
      • BORING BAR HEAD (7)
      • SQUARE SHANK (147)
      • TAPER SHANK (17)
      System Size
      System Size
      • KM25 (17)
      Back-End Diameter
      Back-End Diameter
      • 7.9 mm(1)
      • 9.5 mm(1)
      • 9.525 mm(3)
      • 10.0 mm(3)
      • 12.0 mm(3)
      • 12.701 mm(9)
      • 15.875 mm(8)
      • 16.0 mm(6)
      • 19.05 mm(15)
      • 20.0 mm(14)
      • 25.0 mm(26)
      • 25.401 mm(8)
      • 31.75 mm(8)
      • 32.0 mm(7)
      • 38.1 mm(2)
      • 40.0 mm(6)
      • 44.45 mm(3)
      • 50.0 mm(1)
      • 50.801 mm(6)
      • 57.151 mm(1)
      • 63.5 mm(8)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.311 in(1)
      • 0.374 in(1)
      • 0.375 in(3)
      • 0.394 in(3)
      • 0.473 in(3)
      • 0.5 in(9)
      • 0.625 in(8)
      • 0.63 in(6)
      • 0.75 in(15)
      • 0.787 in(14)
      • 0.984 in(26)
      • 1.0 in(8)
      • 1.25 in(8)
      • 1.26 in(7)
      • 1.5 in(2)
      • 1.575 in(6)
      • 1.75 in(3)
      • 1.969 in(1)
      • 2.0 in(6)
      • 2.25 in(1)
      • 2.5 in(8)
      Back-End Diameter MinkomuBack-End Diameter Max
      Shank Height
      Shank Height
      • 0.375 in(4)
      • 0.394 in(3)
      • 0.473 in(5)
      • 0.5 in(8)
      • 0.584 in(2)
      • 0.606 in(2)
      • 0.625 in(8)
      • 0.63 in(8)
      • 0.741 in(11)
      • 0.75 in(16)
      • 0.764 in(1)
      • 0.787 in(11)
      • 0.939 in(5)
      • 0.961 in(1)
      • 0.984 in(21)
      • 1.0 in(28)
      • 1.214 in(7)
      • 1.25 in(15)
      • 1.26 in(16)
      • 1.5 in(4)
      • 1.53 in(6)
      • 1.848 in(1)
      Shank Height MinkomuShank Height Max
      Shank Height
      Shank Height
      • 9.525 mm(4)
      • 10.0 mm(3)
      • 12.0 mm(5)
      • 12.701 mm(8)
      • 14.826 mm(2)
      • 15.4 mm(2)
      • 15.875 mm(8)
      • 16.0 mm(8)
      • 18.825 mm(11)
      • 19.05 mm(16)
      • 19.401 mm(1)
      • 20.0 mm(11)
      • 23.826 mm(5)
      • 24.401 mm(1)
      • 25.0 mm(21)
      • 25.401 mm(28)
      • 30.826 mm(7)
      • 31.75 mm(15)
      • 32.0 mm(16)
      • 38.1 mm(4)
      • 38.825 mm(6)
      • 46.95 mm(1)
      Shank Height MinkomuShank Height Max
      Shank Width
      Shank Width
      • 0.375 in(4)
      • 0.394 in(3)
      • 0.473 in(5)
      • 0.5 in(8)
      • 0.625 in(8)
      • 0.63 in(8)
      • 0.75 in(16)
      • 0.787 in(12)
      • 0.864 in(5)
      • 0.984 in(23)
      • 1.0 in(28)
      • 1.141 in(7)
      • 1.25 in(15)
      • 1.26 in(13)
      • 1.455 in(6)
      • 1.5 in(4)
      • 1.848 in(1)
      Shank Width MinkomuShank Width Max
      Shank Width
      Shank Width
      • 9.525 mm(4)
      • 10.0 mm(3)
      • 12.0 mm(5)
      • 12.701 mm(8)
      • 15.875 mm(8)
      • 16.0 mm(8)
      • 19.05 mm(16)
      • 20.0 mm(12)
      • 21.951 mm(5)
      • 25.0 mm(23)
      • 25.401 mm(28)
      • 28.951 mm(7)
      • 31.75 mm(15)
      • 32.0 mm(13)
      • 36.95 mm(6)
      • 38.1 mm(4)
      • 46.95 mm(1)
      Shank Width MinkomuShank Width Max
      No filters matching ""

      Závitování TOP NOTCH™

      Závitování TOP NOTCH™
      View Categories

      Závitování LT

      Závitování LT
      View Categories

      KM – Závitování

      KM – Závitování
      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?