PSC 50

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (119)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(119)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(119)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(119)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(119)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(119)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(119)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(119)
    • M Stainless Steel (119)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(119)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(119)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(119)
    • K Cast Iron (119)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(119)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(119)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(119)
    • N Non-Ferrous Materials (118)
      • N1
        Wrought Aluminum (118)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(118)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(88)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (118)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (118)
      • N6
        Carbon, Graphite Composites, CFRP (118)
      • N7
        MMC's (102)
    • S High-Temp Alloys (119)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(119)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(119)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(119)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(119)
    • H Hardened Materials (105)
      • H1
        Hardened Materials 44-48 HRC(105)
      • H2
        Hardened Materials 48-55 HRC(105)
      • H3
        Hardened Materials 56-60 HRC(105)
      • H4
        Hardened Materials >60 HRC(84)
    • C CFRP Materials (94)
      • C1
        CFRP, CFRP / CFRP (94)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (78)
    Applications
    Applications
    • FacingFacing (94)
    • GroovingGrooving (8)
    • ID FacingID Facing (88)
    • ID GroovingID Grooving (12)
    • ID Thread TurningID Thread Turning (6)
    • Multiple Direction CuttingMultiple Direction Cutting (94)
    • OD Thread TurningOD Thread Turning (4)
    • Plunge TurningPlunge Turning (42)
    • ProfilingProfiling (4)
    • TRN BoringTRN Boring (88)
    • TurningTurning (94)
    Type of Thread
    Type of Thread
    • 55 (10)
    • 60 (25)
    • ACME (23)
    • API (16)
    • API BUTTRESS (3)
    • API RD (17)
    • BSPT (7)
    • BSW (20)
    • BUTTRESS (15)
    • M (22)
    • NPT (17)
    • NPTF (7)
    • RD DIN 405 (10)
    • STUB ACME (20)
    • TR DIN 103 (10)
    • UN (22)
    • UNJ (17)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (109)
    • Lightly Interrupted Cut (109)
    • Smooth Cut (109)
    • Varying Depth of Cut (109)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (4)
    • 62.5 (1)
    • 72.5 (1)
    • 75.0 (8)
    • 90.0 (25)
    • 93.0 (32)
    • 95.0 (37)
    • 107.5 (11)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • PSC (75)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (82)
    • 2.0 (97)
    • 3.0 (13)
    • 4.0 (69)
    • 6.0 (5)
    • 8.0 (37)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(1)
    • 2.047 in(10)
    • 2.362 in(51)
    • 2.441 in(3)
    • 2.559 in(3)
    • 2.757 in(5)
    • 3.15 in(5)
    • 3.543 in(17)
    • 3.938 in(3)
    • 4.134 in(1)
    • 4.331 in(7)
    • 5.513 in(8)
    • 5.906 in(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(1)
    • 52.0 mm(10)
    • 60.0 mm(51)
    • 62.0 mm(3)
    • 65.0 mm(3)
    • 70.0 mm(5)
    • 80.0 mm(5)
    • 90.0 mm(17)
    • 100.0 mm(3)
    • 105.0 mm(1)
    • 110.0 mm(7)
    • 140.0 mm(8)
    • 150.0 mm(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(8)
    • 0.001 in(15)
    • 0.002 in(39)
    • 0.003 in(22)
    • 0.004 in(88)
    • 0.005 in(11)
    • 0.006 in(19)
    • 0.007 in(16)
    • 0.008 in(84)
    • 0.01 in(16)
    • 0.011 in(12)
    • 0.012 in(12)
    • 0.014 in(28)
    • 0.015 in(1)
    • 0.016 in(95)
    • 0.017 in(3)
    • 0.019 in(13)
    • 0.02 in(12)
    • 0.021 in(2)
    • 0.023 in(13)
    • 0.024 in(3)
    • 0.028 in(3)
    • 0.03 in(3)
    • 0.031 in(104)
    • 0.035 in(13)
    • 0.037 in(4)
    • 0.039 in(13)
    • 0.047 in(103)
    • 0.049 in(12)
    • 0.055 in(1)
    • 0.06 in(13)
    • 0.062 in(28)
    • 0.063 in(78)
    • 0.069 in(12)
    • 0.078 in(10)
    • 0.079 in(13)
    • 0.089 in(13)
    • 0.094 in(6)
    • 0.095 in(27)
    • 0.098 in(3)
    • 0.125 in(3)
    • 0.126 in(4)
    • 0.25 in(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(8)
    • 0.025 mm(15)
    • 0.05 mm(39)
    • 0.076 mm(22)
    • 0.1 mm(88)
    • 0.125 mm(11)
    • 0.151 mm(19)
    • 0.176 mm(16)
    • 0.2 mm(84)
    • 0.225 mm(11)
    • 0.25 mm(16)
    • 0.275 mm(12)
    • 0.301 mm(12)
    • 0.325 mm(14)
    • 0.351 mm(27)
    • 0.375 mm(1)
    • 0.4 mm(95)
    • 0.426 mm(3)
    • 0.45 mm(13)
    • 0.476 mm(4)
    • 0.5 mm(12)
    • 0.525 mm(2)
    • 0.576 mm(13)
    • 0.601 mm(3)
    • 0.701 mm(3)
    • 0.75 mm(3)
    • 0.775 mm(12)
    • 0.8 mm(92)
    • 0.9 mm(13)
    • 0.925 mm(4)
    • 1.0 mm(13)
    • 1.201 mm(103)
    • 1.25 mm(12)
    • 1.401 mm(1)
    • 1.5 mm(12)
    • 1.526 mm(1)
    • 1.576 mm(28)
    • 1.6 mm(78)
    • 1.75 mm(12)
    • 1.975 mm(10)
    • 2.0 mm(13)
    • 2.25 mm(13)
    • 2.375 mm(6)
    • 2.401 mm(27)
    • 2.5 mm(3)
    • 3.176 mm(3)
    • 3.2 mm(4)
    • 6.351 mm(2)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (49)
    • 241 (18)
    • CL4 (40)
    • CM2 (44)
    • CM3 (40)
    • CM4 (25)
    • CPX (46)
    • CW2 (32)
    • CW2015 (49)
    • CW5025 (54)
    • GH1 (3)
    • GX (26)
    • HCK10 (12)
    • HCK20 (3)
    • HK1500 (66)
    • HK35 (4)
    • HT2 (62)
    • HTX (40)
    • HWK15 (12)
    • K00326 (4)
    • K00331 (4)
    • K060 (23)
    • K090 (53)
    • K1 (23)
    • K1010P (3)
    • K10M (68)
    • K10P (56)
    • K10U (65)
    • K15 (6)
    • K15U (65)
    • K20K (61)
    • K21 (26)
    • K25M (69)
    • K25P (63)
    • K2885 (12)
    • K313 (105)
    • K35P (26)
    • K420 (55)
    • K45 (26)
    • K4H (10)
    • K68 (98)
    • K8735 (4)
    • KB1340 (29)
    • KB1345 (44)
    • KB1610 (51)
    • KB1625 (39)
    • KB1630 (44)
    • KB5610 (48)
    • KB5625 (58)
    • KB5630 (45)
    • KB9610 (65)
    • KB9640 (34)
    • KBH10 (65)
    • KBH10B (37)
    • KBH20 (69)
    • KBH20B (37)
    • KBK35 (18)
    • KC210 (42)
    • KC250 (48)
    • KC5010 (115)
    • KC5020P (14)
    • KC5025 (115)
    • KC5410 (93)
    • KC5510 (64)
    • KC5525 (47)
    • KC710 (41)
    • KC720 (83)
    • KC722 (37)
    • KC730 (100)
    • KC7310 (70)
    • KC732 (69)
    • KC8050 (94)
    • KC810 (105)
    • KC850 (107)
    • KC9010 (78)
    • KC9025 (94)
    • KC910 (92)
    • KC9105 (90)
    • KC9110 (109)
    • KC9120 (91)
    • KC9125 (94)
    • KC9125RR (3)
    • KC9140 (68)
    • KC9145 (56)
    • KC9210 (14)
    • KC9215 (66)
    • KC9225 (92)
    • KC9240 (88)
    • KC9240NEW (88)
    • KC9245 (66)
    • KC9315 (94)
    • KC9320 (103)
    • KC9325 (77)
    • KC935 (109)
    • KC950 (97)
    • KC990 (80)
    • KCD25 (27)
    • KCK05 (94)
    • KCK05B (81)
    • KCK15 (87)
    • KCK15B (94)
    • KCK20 (101)
    • KCK20B (103)
    • KCM15 (88)
    • KCM15B (92)
    • KCM25 (92)
    • KCM25B (86)
    • KCM25S (12)
    • KCM35 (78)
    • KCM35B (62)
    • KCP05 (83)
    • KCP05B (71)
    • KCP10 (94)
    • KCP10B (109)
    • KCP15 (10)
    • KCP20S (12)
    • KCP25 (94)
    • KCP25B (109)
    • KCP25C (109)
    • KCP30 (90)
    • KCP30B (61)
    • KCP40 (51)
    • KCP40B (70)
    • KCPK05 (62)
    • KCS10 (40)
    • KCS10B (88)
    • KCS25S (12)
    • KCU10 (109)
    • KCU10B (109)
    • KCU25 (105)
    • KCU25B (105)
    • KD050 (53)
    • KD081 (59)
    • KD100 (47)
    • KD120 (43)
    • KD1400 (48)
    • KD1405 (33)
    • KD1425 (62)
    • KM1 (21)
    • KMF (18)
    • KN10S (12)
    • KS15 (22)
    • KT1120 (17)
    • KT125 (47)
    • KT150 (30)
    • KT175 (74)
    • KT315 (96)
    • KT325 (62)
    • KT5020 (3)
    • KTP10 (75)
    • KTP25S (62)
    • KU10 (22)
    • KU10T (90)
    • KU25T (19)
    • KU30T (103)
    • KY1310 (32)
    • KY1320 (54)
    • KY1540 (28)
    • KY1615 (51)
    • KY2000 (32)
    • KY2100 (23)
    • KY3000 (64)
    • KY3400 (37)
    • KY3500 (54)
    • KY4000 (28)
    • KY4300 (29)
    • KY4400 (54)
    • KYHK15B (54)
    • KYK10 (26)
    • KYK25 (37)
    • KYK35 (54)
    • KYS25 (28)
    • KYS30 (31)
    • NL200 (32)
    • NL250 (62)
    • NL300 (46)
    • NL400 (30)
    • NL920 (50)
    • P25 (27)
    • PB100 (21)
    • PB170 (18)
    • PB250 (21)
    • PB300 (18)
    • PD100 (12)
    • PD50 (4)
    • PN120 (1)
    • PS5 (40)
    • SP0819 (46)
    • SP0A00 (3)
    • SP3019 (33)
    • SP4019 (37)
    • SP4036 (3)
    • SP4066 (2)
    • SP4093 (3)
    • SP61EJ (3)
    • SPADAP (5)
    • SPN3W1 (8)
    • SPSREJ (2)
    • THM (60)
    • THM-X (46)
    • THMF-X (21)
    • TN10P (96)
    • TN10U (65)
    • TN15M (78)
    • TN15U (65)
    • TN2000 (66)
    • TN20K (80)
    • TN20P (90)
    • TN30M (86)
    • TN30P (51)
    • TN4000 (63)
    • TN5015 (70)
    • TN5020 (77)
    • TN5105 (59)
    • TN5120 (79)
    • TN6010 (63)
    • TN6025 (74)
    • TN7005 (68)
    • TN7010 (83)
    • TN7015 (83)
    • TN7025 (83)
    • TN7035 (71)
    • TN7105 (67)
    • TN7110 (94)
    • TN7115 (79)
    • TN7125 (79)
    • TN7135 (71)
    • TN8025 (71)
    • TTI15 (61)
    • TTM (8)
    • TTM09 (3)
    • TTR (32)
    • TTS (49)
    • TTX (54)
    • W00342 (4)
    • WBH10C (64)
    • WBH10P (45)
    • WBH10U (51)
    • WBH20P (55)
    • WBH25P (48)
    • WBH25U (51)
    • WBH30P (45)
    • WBK40U (29)
    • WBK45U (45)
    • WDN00U (28)
    • WDN25U (48)
    • WK05CT (78)
    • WK15CT (63)
    • WK20CT (88)
    • WM15CT (86)
    • WM25CT (86)
    • WM35CT (64)
    • WP05CT (21)
    • WP15CT (88)
    • WP20TT (11)
    • WP25CT (88)
    • WP35CT (88)
    • WS10PT (73)
    • WS25PT (75)
    • WU05PT (12)
    • WU10HT (90)
    • WU10PT (75)
    • WU25PT (79)
    • X00511 (18)
    • X00580 (18)
    • X00581 (18)
    • X00582 (18)
    • X00583 (18)
    • X00584 (18)
    • X00585 (18)
    • X00586 (18)
    • X00591 (18)
    • X00592 (18)
    • X00593 (18)
    • X00594 (18)
    • X00596 (18)
    • X00597 (18)
    • X00599 (18)
    Hand Of Tool
    Hand Of Tool
    • L (34)
    • N (2)
    • R (39)
    Wiper Insert
    Wiper Insert
    • N (119)
    • Y (57)
    F Dimension
    F Dimension
    • 0.0 mm(2)
    • 11.0 mm(4)
    • 12.0 mm(2)
    • 13.0 mm(5)
    • 14.0 mm(1)
    • 17.0 mm(16)
    • 18.0 mm(2)
    • 22.0 mm(8)
    • 27.0 mm(13)
    • 35.0 mm(22)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(2)
    • 0.433 in(4)
    • 0.473 in(2)
    • 0.512 in(5)
    • 0.551 in(1)
    • 0.669 in(16)
    • 0.709 in(2)
    • 0.866 in(8)
    • 1.063 in(13)
    • 1.379 in(22)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(3)
    • 20.0 mm(6)
    • 24.0 mm(1)
    • 25.0 mm(5)
    • 32.0 mm(14)
    • 33.0 mm(3)
    • 33.5 mm(1)
    • 38.5 mm(2)
    • 40.0 mm(6)
    • 41.301 mm(2)
    • 47.6 mm(2)
    • 48.5 mm(1)
    • 50.0 mm(7)
    • 52.5 mm(1)
    • 57.2 mm(1)
    • 62.0 mm(3)
    • 63.0 mm(7)
    • 64.0 mm(2)
    • 65.0 mm(6)
    • 65.5 mm(1)
    • 66.0 mm(1)
    • 80.0 mm(2)
    • 88.9 mm(2)
    • 110.0 mm(27)
    • 125.0 mm(7)
    • 139.701 mm(2)
    • 165.0 mm(1)
    • 174.601 mm(2)
    • 209.601 mm(1)
    • 222.3 mm(1)
    • 223.0 mm(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(3)
    • 0.787 in(6)
    • 0.946 in(1)
    • 0.984 in(5)
    • 1.26 in(14)
    • 1.299 in(3)
    • 1.319 in(1)
    • 1.516 in(2)
    • 1.575 in(6)
    • 1.627 in(2)
    • 1.874 in(2)
    • 1.909 in(1)
    • 1.969 in(7)
    • 2.067 in(1)
    • 2.253 in(1)
    • 2.441 in(3)
    • 2.48 in(7)
    • 2.52 in(2)
    • 2.559 in(6)
    • 2.579 in(1)
    • 2.598 in(1)
    • 3.15 in(2)
    • 3.5 in(2)
    • 4.331 in(27)
    • 4.921 in(7)
    • 5.5 in(2)
    • 6.496 in(1)
    • 6.875 in(2)
    • 8.252 in(1)
    • 8.752 in(1)
    • 8.78 in(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(15)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(15)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (23)
    • E (27)
    • S (25)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (42)
    • NEGATIVE-ZERO (15)
    • NEUTRAL (ZERO) (8)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.417 in(3)
    • 1.811 in(3)
    • 1.85 in(2)
    • 1.969 in(1)
    • 2.008 in(1)
    • 2.047 in(8)
    • 2.205 in(4)
    • 2.362 in(34)
    • 2.441 in(2)
    • 2.52 in(3)
    • 2.559 in(2)
    • 2.598 in(5)
    • 2.638 in(10)
    • 3.15 in(1)
    • 3.465 in(6)
    • 3.48 in(1)
    • 3.938 in(2)
    • 4.449 in(2)
    • 4.646 in(2)
    • 4.686 in(4)
    • 5.906 in(5)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 36.0 mm(3)
    • 46.0 mm(3)
    • 47.0 mm(2)
    • 50.0 mm(1)
    • 51.0 mm(1)
    • 52.0 mm(8)
    • 56.0 mm(4)
    • 60.0 mm(34)
    • 62.0 mm(2)
    • 64.0 mm(3)
    • 65.0 mm(2)
    • 66.0 mm(5)
    • 67.0 mm(10)
    • 80.0 mm(1)
    • 88.0 mm(6)
    • 88.4 mm(1)
    • 100.0 mm(2)
    • 113.0 mm(2)
    • 118.0 mm(2)
    • 119.0 mm(4)
    • 150.0 mm(5)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (62)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • CARTRIDGE MOUNT (8)
    • END MILL ADAPTER (8)
    • ER COLLET CHUCK (8)
    • EXTENSION (2)
    • HYDRAULIC CHUCK (18)
    • MODULAR ADAPTER (3)
    • RC TAP CHUCK ADAPTER-T & C (1)
    • SHELL MILL ADAPTER (4)
    • SQUARE SHANK ADAPTER (7)
    Clamp Style
    Clamp Style
    • D (41)
    • N (19)
    • P (27)
    • S (32)
    Cutting Width
    Cutting Width
    • 0.02 in(2)
    • 0.031 in(2)
    • 0.035 in(2)
    • 0.039 in(12)
    • 0.041 in(2)
    • 0.047 in(12)
    • 0.055 in(2)
    • 0.058 in(2)
    • 0.06 in(12)
    • 0.062 in(12)
    • 0.067 in(2)
    • 0.069 in(12)
    • 0.073 in(10)
    • 0.077 in(2)
    • 0.078 in(10)
    • 0.079 in(12)
    • 0.088 in(12)
    • 0.089 in(8)
    • 0.094 in(4)
    • 0.095 in(12)
    • 0.097 in(10)
    • 0.098 in(12)
    • 0.105 in(10)
    • 0.108 in(12)
    • 0.11 in(10)
    • 0.119 in(15)
    • 0.122 in(10)
    • 0.125 in(15)
    • 0.126 in(15)
    • 0.128 in(12)
    • 0.129 in(2)
    • 0.131 in(4)
    • 0.138 in(15)
    • 0.143 in(10)
    • 0.147 in(2)
    • 0.151 in(2)
    • 0.152 in(2)
    • 0.156 in(10)
    • 0.157 in(13)
    • 0.167 in(13)
    • 0.169 in(10)
    • 0.177 in(13)
    • 0.178 in(10)
    • 0.185 in(13)
    • 0.188 in(13)
    • 0.189 in(13)
    • 0.192 in(4)
    • 0.193 in(4)
    • 0.195 in(10)
    • 0.196 in(10)
    • 0.197 in(3)
    • 0.202 in(3)
    • 0.213 in(3)
    • 0.217 in(3)
    • 0.219 in(3)
    • 0.237 in(3)
    • 0.25 in(3)
    • 0.256 in(3)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(2)
    • 0.775 mm(2)
    • 0.8 mm(2)
    • 0.9 mm(2)
    • 1.0 mm(12)
    • 1.05 mm(2)
    • 1.201 mm(12)
    • 1.401 mm(2)
    • 1.475 mm(2)
    • 1.5 mm(12)
    • 1.576 mm(12)
    • 1.701 mm(2)
    • 1.75 mm(12)
    • 1.826 mm(10)
    • 1.951 mm(2)
    • 1.975 mm(10)
    • 2.0 mm(12)
    • 2.2 mm(12)
    • 2.225 mm(12)
    • 2.25 mm(8)
    • 2.375 mm(4)
    • 2.401 mm(12)
    • 2.475 mm(10)
    • 2.5 mm(12)
    • 2.676 mm(10)
    • 2.75 mm(12)
    • 2.801 mm(10)
    • 3.0 mm(15)
    • 3.1 mm(10)
    • 3.176 mm(15)
    • 3.2 mm(15)
    • 3.25 mm(12)
    • 3.276 mm(2)
    • 3.325 mm(4)
    • 3.5 mm(15)
    • 3.6 mm(10)
    • 3.725 mm(2)
    • 3.825 mm(2)
    • 3.85 mm(2)
    • 3.95 mm(10)
    • 3.975 mm(4)
    • 4.0 mm(13)
    • 4.25 mm(13)
    • 4.3 mm(10)
    • 4.5 mm(13)
    • 4.525 mm(10)
    • 4.7 mm(13)
    • 4.775 mm(13)
    • 4.801 mm(13)
    • 4.875 mm(4)
    • 4.9 mm(4)
    • 4.95 mm(10)
    • 4.976 mm(10)
    • 5.0 mm(3)
    • 5.125 mm(3)
    • 5.4 mm(3)
    • 5.5 mm(3)
    • 5.575 mm(3)
    • 6.0 mm(3)
    • 6.351 mm(3)
    • 6.5 mm(3)
    Cutting Width MinkomuCutting Width Max
    Front End Type
    Front End Type
    • CCS - PSC (5)
    • FDA - Milling Cutter Arbor (4)
    • MCS - Modular Cartridge System (8)
    • SWB - Tap Chuck Adapter (1)
    • SZK - Collet Taper (8)
    • VKT - Square Shank (7)
    • ZYL - Cylindrical Adapter (26)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (37)
    • D-DIAMOND/RHOMBIC 55 (28)
    • LT-TRIANGLE LAY DOWN THREAD 60 (10)
    • R-ROUND (2)
    • S-SQUARE 90 (5)
    • TN-TOP NOTCH (15)
    • V-DIAMOND/RHOMBIC 35 (17)
    • W-TRIGON 80 (5)
    Front End Style
    Front End Style
    • CCS01 Std Design (5)
    • FDA22 Transv Drive & SHCS (4)
    • MCS01 Modular Deep Grooving (8)
    • SWB-01 WFL#...WES#(Bilz) (1)
    • SZK02 Collets 8 Degree Taper (8)
    • VKT01 Std Design (7)
    • ZYL01 Straight Shank (18)
    • ZYL14 Weldon+Whistle Notch (8)
    Insert Size
    Insert Size
    • 2 (2)
    • 3 (10)
    • 4 (3)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.138 in(2)
    • 0.21 in(8)
    • 0.294 in(3)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 3.5 mm(2)
    • 5.325 mm(8)
    • 7.476 mm(3)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 0.906 in(4)
    • 0.984 in(1)
    • 1.024 in(1)
    • 1.339 in(1)
    • 1.379 in(1)
    • 1.496 in(1)
    • 1.693 in(2)
    • 1.929 in(2)
    • 1.969 in(1)
    • 2.185 in(2)
    • 2.362 in(5)
    • 2.5 in(2)
    • 2.559 in(7)
    • 2.757 in(3)
    • 2.953 in(3)
    • 3.031 in(1)
    • 3.15 in(11)
    • 3.346 in(3)
    • 3.74 in(1)
    • 3.938 in(5)
    Gage Length
    Gage Length
    • 80 mm(11)
    • 65 mm(7)
    • 100 mm(5)
    • 60 mm(5)
    • 23 mm(4)
    • 70 mm(3)
    • 75 mm(3)
    • 85 mm(3)
    • 43 mm(2)
    • 49 mm(2)
    • 25 mm(1)
    • 26 mm(1)
    • 34 mm(1)
    • 35 mm(1)
    • 38 mm(1)
    • 50 mm(1)
    • 77 mm(1)
    • 95 mm(1)
    • 55.5 mm(2)
    • 63.5 mm(2)
    Front End Size
    Front End Size
    • 0.237 in(2)
    • 0.315 in(2)
    • 0.394 in(2)
    • 0.473 in(2)
    • 0.551 in(3)
    • 0.63 in(4)
    • 0.709 in(3)
    • 0.748 in(1)
    • 0.75 in(2)
    • 0.787 in(3)
    • 0.866 in(1)
    • 0.984 in(2)
    • 1.0 in(1)
    • 1.063 in(1)
    • 1.25 in(1)
    • 1.26 in(1)
    • 1.969 in(3)
    Front End Size MinkomuFront End Size Max
    Front End Size
    Front End Size
    • 6.0 mm(2)
    • 8.0 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(2)
    • 14.0 mm(3)
    • 16.0 mm(4)
    • 18.0 mm(3)
    • 19.0 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(3)
    • 22.0 mm(1)
    • 25.0 mm(2)
    • 25.401 mm(1)
    • 27.0 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 50.0 mm(3)
    Front End Size MinkomuFront End Size Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (92)
    • B L (79)
    • C A (56)
    • C N (77)
    • D P (76)
    • H T (96)
    • H W (119)
    backEnd
    Connection Type
    Connection Type
    • TAPER SHANK (75)
    System Size
    System Size
    • PSC50 (82)
    • PSC63 (10)
    • VDI40 (1)
    • VDI50 (1)
    Back-End Diameter
    Back-End Diameter
    • 40.0 mm(1)
    • 49.975 mm(1)
    • 50.0 mm(166)
    • 63.0 mm(10)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.575 in(1)
    • 1.968 in(1)
    • 1.969 in(166)
    • 2.48 in(10)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)