Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Top Notch™ Inserts

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1491)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1491)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1491)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1491)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1491)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1491)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1491)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1491)
    • M Stainless Steel (1292)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1292)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1292)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1292)
    • K Cast Iron (1111)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1111)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1111)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1111)
    • N Non-Ferrous Materials (1072)
      • N1
        Wrought Aluminum (1070)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(916)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(2)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1072)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (918)
      • N6
        Carbon, Graphite Composites, CFRP (916)
    • S High-Temp Alloys (1288)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1288)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1288)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1288)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1288)
    • H Hardened Materials (450)
      • H1
        Hardened Materials 44-48 HRC(450)
      • H2
        Hardened Materials 48-55 HRC(276)
    Applications
    Applications
    • Back BoringBack Boring (81)
    • BoringBoring (1168)
    • Face GroovingFace Grooving (1675)
    • FacingFacing (81)
    • GroovingGrooving (1676)
    • ID FacingID Facing (81)
    • ID GroovingID Grooving (1572)
    • Plunge TurningPlunge Turning (1491)
    • ProfilingProfiling (165)
    • TurningTurning (1193)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1030)
    • Lightly Interrupted Cut (1120)
    • Smooth Cut (1266)
    • Varying Depth of Cut (1327)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (229)
    • 2.0 (1466)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(5)
    • 0.004 in(160)
    • 0.007 in(41)
    • 0.008 in(803)
    • 0.01 in(29)
    • 0.014 in(88)
    • 0.02 in(11)
    • 0.023 in(210)
    • 0.03 in(2)
    • 0.031 in(67)
    • 0.033 in(2)
    • 0.039 in(7)
    • 0.047 in(47)
    • 0.049 in(1)
    • 0.06 in(6)
    • 0.062 in(16)
    • 0.063 in(76)
    • 0.069 in(1)
    • 0.078 in(15)
    • 0.079 in(2)
    • 0.095 in(49)
    • 0.098 in(1)
    • 0.125 in(32)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(5)
    • 0.1 mm(160)
    • 0.176 mm(41)
    • 0.2 mm(803)
    • 0.25 mm(29)
    • 0.325 mm(88)
    • 0.5 mm(11)
    • 0.576 mm(210)
    • 0.75 mm(2)
    • 0.775 mm(67)
    • 0.826 mm(2)
    • 1.0 mm(7)
    • 1.201 mm(47)
    • 1.25 mm(1)
    • 1.5 mm(6)
    • 1.576 mm(16)
    • 1.6 mm(76)
    • 1.75 mm(1)
    • 1.975 mm(15)
    • 2.0 mm(2)
    • 2.401 mm(49)
    • 2.5 mm(1)
    • 3.176 mm(32)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (49)
    • K420 (18)
    • K68 (105)
    • KC5010 (174)
    • KC5025 (195)
    • KC5410 (4)
    • KC720 (26)
    • KC730 (222)
    • KC850 (147)
    • KCK20 (6)
    • KCK20B (23)
    • KCP10B (62)
    • KCP25B (108)
    • KCU10 (195)
    • KCU10B (81)
    • KCU25 (267)
    • KD1425 (2)
    • KT315 (11)
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(63)
    • 41.301 mm(18)
    • 47.6 mm(17)
    • 56.625 mm(20)
    • 57.2 mm(14)
    • 88.9 mm(483)
    • 139.701 mm(714)
    • 174.601 mm(88)
    • 209.601 mm(232)
    • 222.3 mm(45)
    • 333.0 mm(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(63)
    • 1.627 in(18)
    • 1.874 in(17)
    • 2.229 in(20)
    • 2.253 in(14)
    • 3.5 in(483)
    • 5.5 in(714)
    • 6.875 in(88)
    • 8.252 in(232)
    • 8.752 in(45)
    • 13.11 in(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 20.0 (3)
    • 45.0 (7)
    Countersunk Angle MinkomuCountersunk Angle Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.02 in(8)
    • 0.031 in(60)
    • 0.035 in(1)
    • 0.039 in(32)
    • 0.041 in(17)
    • 0.047 in(95)
    • 0.055 in(17)
    • 0.058 in(7)
    • 0.06 in(25)
    • 0.062 in(180)
    • 0.067 in(16)
    • 0.069 in(14)
    • 0.073 in(25)
    • 0.077 in(13)
    • 0.078 in(28)
    • 0.079 in(51)
    • 0.088 in(43)
    • 0.089 in(17)
    • 0.094 in(10)
    • 0.095 in(134)
    • 0.097 in(11)
    • 0.098 in(29)
    • 0.105 in(15)
    • 0.108 in(24)
    • 0.11 in(7)
    • 0.119 in(55)
    • 0.122 in(3)
    • 0.125 in(258)
    • 0.126 in(7)
    • 0.128 in(16)
    • 0.131 in(3)
    • 0.138 in(13)
    • 0.143 in(11)
    • 0.147 in(7)
    • 0.151 in(1)
    • 0.152 in(6)
    • 0.156 in(52)
    • 0.157 in(34)
    • 0.167 in(10)
    • 0.177 in(9)
    • 0.178 in(2)
    • 0.185 in(5)
    • 0.188 in(46)
    • 0.189 in(117)
    • 0.192 in(5)
    • 0.193 in(4)
    • 0.195 in(5)
    • 0.196 in(6)
    • 0.197 in(13)
    • 0.213 in(3)
    • 0.217 in(3)
    • 0.237 in(6)
    • 0.25 in(95)
    • 0.256 in(6)
    • 0.312 in(1)
    • 0.375 in(1)
    • 0.381 in(2)
    • 0.384 in(1)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(8)
    • 0.775 mm(48)
    • 0.8 mm(12)
    • 0.9 mm(1)
    • 1.0 mm(32)
    • 1.05 mm(17)
    • 1.201 mm(95)
    • 1.401 mm(17)
    • 1.475 mm(7)
    • 1.5 mm(25)
    • 1.576 mm(180)
    • 1.701 mm(16)
    • 1.75 mm(14)
    • 1.826 mm(25)
    • 1.951 mm(13)
    • 1.975 mm(28)
    • 2.0 mm(51)
    • 2.2 mm(12)
    • 2.225 mm(31)
    • 2.25 mm(17)
    • 2.375 mm(10)
    • 2.401 mm(134)
    • 2.475 mm(11)
    • 2.5 mm(29)
    • 2.676 mm(15)
    • 2.75 mm(24)
    • 2.801 mm(7)
    • 3.0 mm(55)
    • 3.1 mm(3)
    • 3.176 mm(258)
    • 3.2 mm(7)
    • 3.25 mm(16)
    • 3.325 mm(3)
    • 3.5 mm(13)
    • 3.6 mm(11)
    • 3.725 mm(7)
    • 3.825 mm(1)
    • 3.85 mm(6)
    • 3.95 mm(48)
    • 3.975 mm(4)
    • 4.0 mm(34)
    • 4.25 mm(10)
    • 4.5 mm(9)
    • 4.525 mm(2)
    • 4.7 mm(5)
    • 4.775 mm(46)
    • 4.801 mm(117)
    • 4.875 mm(5)
    • 4.9 mm(4)
    • 4.95 mm(5)
    • 4.976 mm(6)
    • 5.0 mm(13)
    • 5.4 mm(3)
    • 5.5 mm(3)
    • 6.0 mm(6)
    • 6.351 mm(95)
    • 6.5 mm(6)
    • 7.926 mm(1)
    • 9.525 mm(1)
    • 9.675 mm(2)
    • 9.75 mm(1)
    Cutting Width MinkomuCutting Width Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.65 mm(8)
    • 0.75 mm(123)
    • 1.026 mm(221)
    • 1.1 mm(165)
    • 1.326 mm(11)
    • 1.901 mm(6)
    • 1.975 mm(8)
    • 2.551 mm(7)
    • 2.75 mm(6)
    • 2.776 mm(2)
    • 2.926 mm(130)
    • 3.801 mm(47)
    • 3.85 mm(8)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.027 in(8)
    • 0.03 in(123)
    • 0.04 in(221)
    • 0.044 in(165)
    • 0.053 in(11)
    • 0.075 in(6)
    • 0.078 in(8)
    • 0.1 in(7)
    • 0.108 in(6)
    • 0.109 in(2)
    • 0.115 in(130)
    • 0.15 in(47)
    • 0.152 in(8)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    insertGeometry
    Insert Seat Size
    Insert Seat Size
    • 1 (16)
    • 2 (502)
    • 3 (874)
    • 4 (298)
    • 5 (3)
    • 6 (2)
    Cutting Tool Material
    Cutting Tool Material
    • D P (2)
    • H T (11)
    • H W (1682)
    No filters matching ""
    NGD-K ● Double Ended Insert
    (25)

    NGD-K ● Double Ended Insert

    NRD
    (30)

    NRD

    NG-K
    (627)

    NG-K

    NG
    (395)

    NG

    NGP
    (59)

    NGP

    NP-K
    (19)

    NP-K

    NPD-K
    (10)

    NPD-K

    NRP
    (48)

    NRP

    NF
    (7)

    NF

    NFD-K
    (23)

    NFD-K

    NFD-KI
    (7)

    NFD-KI

    NGC-K
    (5)

    NGC-K

    NB
    (21)

    NB

    NF-K
    (12)

    NF-K

    NV
    (3)

    NV

    NU
    (7)

    NU

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?