Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Drážkování

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (3847)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3847)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3847)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3847)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3847)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3847)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3847)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3847)
    • M Stainless Steel (3418)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3418)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3418)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3418)
    • K Cast Iron (3462)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3462)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3442)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3430)
    • N Non-Ferrous Materials (3243)
      • N1
        Wrought Aluminum (3235)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3037)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(231)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (3243)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3045)
      • N6
        Carbon, Graphite Composites, CFRP (3037)
      • N7
        MMC's (145)
    • S High-Temp Alloys (3473)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3473)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3473)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3473)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3449)
    • H Hardened Materials (1915)
      • H1
        Hardened Materials 44-48 HRC(1915)
      • H2
        Hardened Materials 48-55 HRC(1683)
      • H3
        Hardened Materials 56-60 HRC(330)
      • H4
        Hardened Materials >60 HRC(330)
    Vybrat první volbu
    • BR (63)
    • CN (428)
    • DE (438)
    • GB (256)
    • IN (131)
    • SG (203)
    • US (552)
    Applications
    Applications
    • Back BoringBack Boring (826)
    • BoringBoring (2289)
    • CRT ProfilingCRT Profiling (2)
    • Chamfer TurningChamfer Turning (69)
    • Cut-OffCut-Off (1002)
    • Deep GroovingDeep Grooving (141)
    • Face GroovingFace Grooving (3082)
    • FacingFacing (907)
    • GroovingGrooving (3620)
    • ID FacingID Facing (833)
    • ID GroovingID Grooving (2903)
    • ID Thread TurningID Thread Turning (69)
    • Multiple Direction CuttingMultiple Direction Cutting (351)
    • OD Thread TurningOD Thread Turning (127)
    • Plunge TurningPlunge Turning (2406)
    • ProfilingProfiling (1077)
    • TRN BoringTRN Boring (44)
    • ThreadingThreading (130)
    • TurningTurning (2186)
    Type of Thread
    Type of Thread
    • 60 (187)
    • ACME (122)
    • API (114)
    • API RD (86)
    • BSW (78)
    • BUTTRESS (182)
    • M (114)
    • NPT (78)
    • STUB ACME (78)
    • UN (182)
    • UNJ (78)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (2592)
    • Lightly Interrupted Cut (3020)
    • Smooth Cut (3486)
    • Varying Depth of Cut (3394)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (20)
    • 90.0 (866)
    • 92.25 (27)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (6)
    • Boring Bar Shank (159)
    • Cutoff Support Blade A1-A3 (52)
    • Toolholder (557)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (1659)
    • 2.0 (2771)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.795 in(1)
    • 0.992 in(2)
    • 1.625 in(6)
    • 1.881 in(10)
    • 1.954 in(4)
    • 2.037 in(8)
    • 2.111 in(5)
    • 2.156 in(8)
    • 2.165 in(1)
    • 2.19 in(2)
    • 2.192 in(1)
    • 2.274 in(4)
    • 2.343 in(1)
    • 2.347 in(9)
    • 2.352 in(1)
    • 2.431 in(6)
    • 2.5 in(4)
    • 2.584 in(2)
    • 2.668 in(4)
    • 2.757 in(2)
    • 3.15 in(2)
    • 3.5 in(4)
    • 3.553 in(3)
    • 3.938 in(4)
    • 4.0 in(3)
    • 4.341 in(21)
    • 4.5 in(125)
    • 4.921 in(167)
    • 4.931 in(4)
    • 4.933 in(5)
    • 5.0 in(34)
    • 5.327 in(2)
    • 5.348 in(2)
    • 5.372 in(4)
    • 5.394 in(4)
    • 5.463 in(4)
    • 5.508 in(12)
    • 5.906 in(120)
    • 5.912 in(1)
    • 5.915 in(19)
    • 5.917 in(4)
    • 5.961 in(10)
    • 6.0 in(167)
    • 6.114 in(2)
    • 6.136 in(2)
    • 6.25 in(4)
    • 6.372 in(2)
    • 6.394 in(2)
    • 6.694 in(47)
    • 6.703 in(4)
    • 7.0 in(15)
    • 7.079 in(2)
    • 7.087 in(12)
    • 7.875 in(34)
    • 7.976 in(1)
    • 8.0 in(5)
    • 8.019 in(6)
    • 8.02 in(4)
    • 9.843 in(16)
    • 9.879 in(1)
    • 10.0 in(8)
    • 10.02 in(3)
    • 10.025 in(1)
    • 10.236 in(2)
    • 11.811 in(10)
    • 12.0 in(9)
    • 12.02 in(3)
    • 12.025 in(2)
    • 13.781 in(1)
    • 14.0 in(10)
    • 16.0 in(10)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 20.201 mm(1)
    • 25.201 mm(2)
    • 41.276 mm(6)
    • 47.75 mm(10)
    • 49.625 mm(4)
    • 51.75 mm(8)
    • 53.625 mm(5)
    • 54.75 mm(8)
    • 55.0 mm(1)
    • 55.625 mm(2)
    • 55.676 mm(1)
    • 57.75 mm(4)
    • 59.5 mm(1)
    • 59.625 mm(9)
    • 59.75 mm(1)
    • 61.75 mm(6)
    • 63.5 mm(4)
    • 65.625 mm(2)
    • 67.75 mm(4)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 88.9 mm(4)
    • 90.25 mm(3)
    • 100.0 mm(4)
    • 101.601 mm(3)
    • 110.25 mm(21)
    • 114.301 mm(125)
    • 125.0 mm(167)
    • 125.25 mm(4)
    • 125.301 mm(5)
    • 127.0 mm(34)
    • 135.3 mm(2)
    • 135.85 mm(2)
    • 136.451 mm(4)
    • 137.0 mm(4)
    • 138.75 mm(4)
    • 139.9 mm(12)
    • 150.0 mm(120)
    • 150.15 mm(1)
    • 150.25 mm(19)
    • 150.3 mm(4)
    • 151.4 mm(10)
    • 152.4 mm(167)
    • 155.3 mm(2)
    • 155.851 mm(2)
    • 158.75 mm(4)
    • 161.851 mm(2)
    • 162.4 mm(2)
    • 170.0 mm(47)
    • 170.25 mm(4)
    • 177.8 mm(15)
    • 179.8 mm(2)
    • 180.0 mm(12)
    • 200.0 mm(34)
    • 202.601 mm(1)
    • 203.201 mm(5)
    • 203.675 mm(6)
    • 203.701 mm(4)
    • 250.0 mm(16)
    • 250.925 mm(1)
    • 254.0 mm(8)
    • 254.5 mm(3)
    • 254.601 mm(1)
    • 260.0 mm(2)
    • 300.0 mm(10)
    • 304.8 mm(9)
    • 305.3 mm(3)
    • 305.401 mm(2)
    • 350.0 mm(1)
    • 355.6 mm(10)
    • 406.401 mm(10)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(26)
    • 0.002 in(78)
    • 0.003 in(192)
    • 0.004 in(320)
    • 0.005 in(78)
    • 0.006 in(160)
    • 0.007 in(195)
    • 0.008 in(1797)
    • 0.01 in(182)
    • 0.011 in(78)
    • 0.012 in(167)
    • 0.014 in(212)
    • 0.015 in(1)
    • 0.016 in(926)
    • 0.019 in(114)
    • 0.02 in(159)
    • 0.023 in(336)
    • 0.03 in(70)
    • 0.031 in(855)
    • 0.033 in(13)
    • 0.034 in(46)
    • 0.035 in(114)
    • 0.039 in(325)
    • 0.041 in(173)
    • 0.046 in(26)
    • 0.047 in(499)
    • 0.048 in(19)
    • 0.049 in(148)
    • 0.06 in(341)
    • 0.061 in(109)
    • 0.062 in(96)
    • 0.063 in(441)
    • 0.065 in(107)
    • 0.069 in(148)
    • 0.078 in(95)
    • 0.079 in(256)
    • 0.08 in(56)
    • 0.081 in(90)
    • 0.089 in(114)
    • 0.094 in(142)
    • 0.095 in(168)
    • 0.096 in(89)
    • 0.098 in(142)
    • 0.099 in(50)
    • 0.1 in(60)
    • 0.109 in(1)
    • 0.119 in(104)
    • 0.12 in(109)
    • 0.125 in(183)
    • 0.128 in(50)
    • 0.156 in(50)
    • 0.157 in(50)
    • 0.158 in(56)
    • 0.159 in(35)
    • 0.187 in(8)
    • 0.188 in(10)
    • 0.197 in(12)
    • 0.198 in(15)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(26)
    • 0.05 mm(78)
    • 0.076 mm(192)
    • 0.1 mm(320)
    • 0.125 mm(78)
    • 0.151 mm(160)
    • 0.176 mm(195)
    • 0.2 mm(1797)
    • 0.225 mm(78)
    • 0.25 mm(182)
    • 0.275 mm(78)
    • 0.301 mm(167)
    • 0.325 mm(212)
    • 0.351 mm(114)
    • 0.375 mm(1)
    • 0.4 mm(926)
    • 0.45 mm(114)
    • 0.476 mm(40)
    • 0.5 mm(159)
    • 0.576 mm(336)
    • 0.75 mm(70)
    • 0.775 mm(221)
    • 0.8 mm(634)
    • 0.826 mm(13)
    • 0.851 mm(46)
    • 0.9 mm(114)
    • 1.0 mm(325)
    • 1.05 mm(173)
    • 1.175 mm(26)
    • 1.201 mm(499)
    • 1.225 mm(19)
    • 1.25 mm(148)
    • 1.5 mm(329)
    • 1.526 mm(69)
    • 1.55 mm(109)
    • 1.576 mm(96)
    • 1.6 mm(441)
    • 1.651 mm(107)
    • 1.75 mm(148)
    • 1.975 mm(95)
    • 2.0 mm(256)
    • 2.025 mm(56)
    • 2.051 mm(90)
    • 2.25 mm(114)
    • 2.375 mm(142)
    • 2.401 mm(168)
    • 2.45 mm(89)
    • 2.5 mm(142)
    • 2.526 mm(50)
    • 2.551 mm(60)
    • 2.776 mm(1)
    • 3.0 mm(104)
    • 3.026 mm(54)
    • 3.051 mm(55)
    • 3.176 mm(183)
    • 3.25 mm(50)
    • 3.95 mm(33)
    • 3.975 mm(17)
    • 4.0 mm(50)
    • 4.025 mm(56)
    • 4.05 mm(35)
    • 4.75 mm(8)
    • 4.775 mm(10)
    • 5.0 mm(12)
    • 5.025 mm(15)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(3285)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(3285)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1 (5)
    • K1025 (105)
    • K2885 (146)
    • K313 (967)
    • K420 (216)
    • K4H (110)
    • K68 (303)
    • KB1345 (114)
    • KB1630 (319)
    • KB5625 (263)
    • KBH20 (231)
    • KC250 (151)
    • KC5010 (688)
    • KC5025 (731)
    • KC5410 (186)
    • KC710 (182)
    • KC720 (213)
    • KC722 (182)
    • KC730 (417)
    • KC732 (78)
    • KC810 (198)
    • KC850 (339)
    • KC910 (110)
    • KC9110 (443)
    • KC9120 (78)
    • KC9125 (261)
    • KC9320 (182)
    • KC935 (182)
    • KC950 (182)
    • KCK20 (366)
    • KCK20B (677)
    • KCM35B (350)
    • KCP10 (293)
    • KCP10B (737)
    • KCP25 (295)
    • KCP25B (793)
    • KCP25C (619)
    • KCS10B (324)
    • KCU10 (1294)
    • KCU10B (1264)
    • KCU25 (1450)
    • KCU25B (1247)
    • KD050 (40)
    • KD081 (78)
    • KD100 (97)
    • KD120 (114)
    • KD1405 (145)
    • KD1425 (86)
    • KMS (95)
    • KT175 (146)
    • KT315 (436)
    • KU10 (260)
    • KU10T (182)
    • KU25T (182)
    • KU30T (367)
    • KY3000 (114)
    • KY3500 (220)
    • KY4300 (6)
    • KYS30 (101)
    • SP88F8 (44)
    Hand Of Tool
    Hand Of Tool
    • L (369)
    • N (40)
    • N - Neutral (3)
    • R (414)
    Wiper Insert
    Wiper Insert
    • N (4080)
    F Dimension
    F Dimension
    • 1.276 mm(3)
    • 1.451 mm(2)
    • 1.826 mm(10)
    • 2.7 mm(3)
    • 3.7 mm(2)
    • 5.476 mm(6)
    • 5.976 mm(6)
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 7.95 mm(3)
    • 8.525 mm(4)
    • 9.0 mm(4)
    • 9.525 mm(8)
    • 10.0 mm(7)
    • 10.3 mm(1)
    • 10.775 mm(1)
    • 10.976 mm(2)
    • 11.0 mm(9)
    • 11.05 mm(7)
    • 11.101 mm(2)
    • 12.0 mm(19)
    • 12.025 mm(2)
    • 12.101 mm(4)
    • 12.15 mm(2)
    • 12.175 mm(2)
    • 12.226 mm(1)
    • 12.576 mm(2)
    • 12.701 mm(24)
    • 12.726 mm(2)
    • 12.75 mm(2)
    • 12.8 mm(6)
    • 12.851 mm(4)
    • 12.9 mm(2)
    • 13.0 mm(15)
    • 13.951 mm(2)
    • 13.976 mm(4)
    • 14.0 mm(2)
    • 14.15 mm(2)
    • 14.275 mm(4)
    • 15.875 mm(12)
    • 15.925 mm(1)
    • 15.976 mm(6)
    • 16.0 mm(12)
    • 16.026 mm(5)
    • 16.1 mm(3)
    • 16.151 mm(4)
    • 16.2 mm(5)
    • 16.225 mm(2)
    • 16.25 mm(2)
    • 16.875 mm(5)
    • 17.0 mm(14)
    • 17.3 mm(6)
    • 17.35 mm(2)
    • 17.475 mm(4)
    • 17.5 mm(2)
    • 19.026 mm(1)
    • 19.05 mm(10)
    • 19.075 mm(18)
    • 19.1 mm(1)
    • 19.125 mm(26)
    • 19.225 mm(7)
    • 19.425 mm(1)
    • 20.0 mm(10)
    • 20.05 mm(16)
    • 20.1 mm(36)
    • 20.201 mm(19)
    • 20.3 mm(2)
    • 21.125 mm(4)
    • 21.776 mm(1)
    • 21.8 mm(1)
    • 22.0 mm(10)
    • 22.225 mm(3)
    • 22.6 mm(2)
    • 25.0 mm(6)
    • 25.05 mm(16)
    • 25.1 mm(32)
    • 25.201 mm(14)
    • 25.3 mm(2)
    • 25.326 mm(2)
    • 25.35 mm(2)
    • 25.401 mm(12)
    • 25.425 mm(16)
    • 25.475 mm(31)
    • 25.5 mm(1)
    • 25.576 mm(7)
    • 25.701 mm(5)
    • 25.776 mm(1)
    • 25.875 mm(1)
    • 26.0 mm(4)
    • 27.0 mm(4)
    • 27.901 mm(1)
    • 28.576 mm(1)
    • 29.875 mm(3)
    • 30.0 mm(8)
    • 30.401 mm(1)
    • 30.8 mm(1)
    • 31.0 mm(2)
    • 31.5 mm(3)
    • 31.75 mm(24)
    • 31.826 mm(12)
    • 31.925 mm(4)
    • 32.0 mm(11)
    • 32.051 mm(4)
    • 32.075 mm(12)
    • 32.176 mm(4)
    • 32.301 mm(4)
    • 32.4 mm(2)
    • 32.525 mm(2)
    • 32.65 mm(2)
    • 33.1 mm(1)
    • 34.875 mm(1)
    • 34.926 mm(4)
    • 35.0 mm(1)
    • 35.1 mm(1)
    • 35.4 mm(1)
    • 38.1 mm(16)
    • 38.275 mm(2)
    • 38.401 mm(2)
    • 38.75 mm(2)
    • 38.901 mm(1)
    • 39.1 mm(2)
    • 40.0 mm(4)
    • 40.176 mm(2)
    • 40.301 mm(2)
    • 40.651 mm(2)
    • 41.276 mm(4)
    • 50.801 mm(4)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.05 in(3)
    • 0.057 in(2)
    • 0.073 in(10)
    • 0.106 in(3)
    • 0.146 in(2)
    • 0.216 in(6)
    • 0.236 in(6)
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.313 in(3)
    • 0.336 in(4)
    • 0.354 in(4)
    • 0.375 in(8)
    • 0.394 in(7)
    • 0.406 in(1)
    • 0.424 in(1)
    • 0.432 in(2)
    • 0.433 in(9)
    • 0.435 in(7)
    • 0.437 in(2)
    • 0.473 in(19)
    • 0.474 in(2)
    • 0.477 in(4)
    • 0.479 in(2)
    • 0.48 in(2)
    • 0.481 in(1)
    • 0.495 in(2)
    • 0.5 in(24)
    • 0.501 in(2)
    • 0.502 in(2)
    • 0.504 in(6)
    • 0.506 in(4)
    • 0.508 in(2)
    • 0.512 in(15)
    • 0.549 in(2)
    • 0.55 in(4)
    • 0.551 in(2)
    • 0.557 in(2)
    • 0.562 in(4)
    • 0.625 in(12)
    • 0.627 in(1)
    • 0.629 in(6)
    • 0.63 in(12)
    • 0.631 in(5)
    • 0.634 in(3)
    • 0.636 in(4)
    • 0.638 in(5)
    • 0.639 in(2)
    • 0.64 in(2)
    • 0.664 in(5)
    • 0.669 in(14)
    • 0.681 in(6)
    • 0.683 in(2)
    • 0.689 in(4)
    • 0.69 in(2)
    • 0.749 in(1)
    • 0.75 in(10)
    • 0.751 in(18)
    • 0.752 in(1)
    • 0.753 in(26)
    • 0.757 in(7)
    • 0.765 in(1)
    • 0.787 in(10)
    • 0.789 in(16)
    • 0.791 in(36)
    • 0.795 in(19)
    • 0.799 in(2)
    • 0.833 in(4)
    • 0.857 in(1)
    • 0.858 in(1)
    • 0.866 in(10)
    • 0.875 in(3)
    • 0.89 in(2)
    • 0.984 in(6)
    • 0.986 in(16)
    • 0.988 in(32)
    • 0.992 in(14)
    • 0.996 in(2)
    • 0.997 in(2)
    • 0.998 in(2)
    • 1.0 in(12)
    • 1.002 in(16)
    • 1.004 in(32)
    • 1.008 in(7)
    • 1.012 in(5)
    • 1.016 in(1)
    • 1.02 in(1)
    • 1.024 in(4)
    • 1.063 in(4)
    • 1.098 in(1)
    • 1.125 in(1)
    • 1.176 in(3)
    • 1.181 in(8)
    • 1.197 in(1)
    • 1.213 in(1)
    • 1.22 in(2)
    • 1.24 in(3)
    • 1.25 in(24)
    • 1.254 in(12)
    • 1.258 in(4)
    • 1.26 in(11)
    • 1.262 in(4)
    • 1.264 in(12)
    • 1.268 in(4)
    • 1.272 in(4)
    • 1.276 in(2)
    • 1.281 in(2)
    • 1.285 in(2)
    • 1.303 in(1)
    • 1.373 in(1)
    • 1.375 in(4)
    • 1.379 in(1)
    • 1.383 in(1)
    • 1.395 in(1)
    • 1.5 in(16)
    • 1.508 in(2)
    • 1.512 in(2)
    • 1.526 in(2)
    • 1.532 in(1)
    • 1.539 in(2)
    • 1.575 in(4)
    • 1.582 in(2)
    • 1.587 in(2)
    • 1.6 in(2)
    • 1.625 in(4)
    • 2.0 in(4)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(151)
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(4)
    • 18.5 mm(2)
    • 18.55 mm(4)
    • 20.0 mm(12)
    • 20.326 mm(1)
    • 22.0 mm(3)
    • 25.0 mm(21)
    • 25.401 mm(6)
    • 26.0 mm(2)
    • 28.576 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(17)
    • 34.0 mm(4)
    • 34.926 mm(6)
    • 38.1 mm(8)
    • 40.0 mm(10)
    • 41.301 mm(57)
    • 44.0 mm(6)
    • 44.45 mm(2)
    • 47.6 mm(56)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 52.0 mm(11)
    • 54.0 mm(4)
    • 55.875 mm(3)
    • 56.625 mm(49)
    • 57.151 mm(6)
    • 57.2 mm(29)
    • 60.325 mm(4)
    • 63.5 mm(22)
    • 65.0 mm(1)
    • 69.851 mm(4)
    • 70.0 mm(4)
    • 76.2 mm(8)
    • 82.551 mm(4)
    • 88.9 mm(552)
    • 90.0 mm(2)
    • 120.0 mm(5)
    • 127.0 mm(1)
    • 139.701 mm(767)
    • 146.05 mm(3)
    • 174.601 mm(127)
    • 209.601 mm(248)
    • 222.3 mm(60)
    • 333.0 mm(4)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(151)
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.728 in(2)
    • 0.73 in(4)
    • 0.787 in(12)
    • 0.8 in(1)
    • 0.866 in(3)
    • 0.984 in(21)
    • 1.0 in(6)
    • 1.024 in(2)
    • 1.125 in(4)
    • 1.25 in(6)
    • 1.26 in(17)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.5 in(8)
    • 1.575 in(10)
    • 1.627 in(57)
    • 1.732 in(6)
    • 1.75 in(2)
    • 1.874 in(56)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.047 in(11)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(49)
    • 2.25 in(6)
    • 2.253 in(29)
    • 2.375 in(4)
    • 2.5 in(22)
    • 2.559 in(1)
    • 2.75 in(4)
    • 2.757 in(4)
    • 3.0 in(8)
    • 3.25 in(4)
    • 3.5 in(552)
    • 3.543 in(2)
    • 4.724 in(5)
    • 5.0 in(1)
    • 5.5 in(767)
    • 5.75 in(3)
    • 6.875 in(127)
    • 8.252 in(248)
    • 8.752 in(60)
    • 13.11 in(4)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(28)
    • 1.024 in(8)
    • 1.063 in(9)
    • 1.102 in(7)
    • 1.26 in(40)
    • 1.339 in(7)
    • 1.379 in(3)
    • 1.655 in(24)
    • 2.047 in(24)
    • 2.441 in(29)
    • 2.52 in(11)
    • 2.598 in(8)
    • 3.15 in(4)
    • 3.228 in(4)
    • 393.661 in(1900)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(28)
    • 26.0 mm(8)
    • 27.0 mm(9)
    • 28.0 mm(7)
    • 32.0 mm(40)
    • 34.0 mm(7)
    • 35.0 mm(3)
    • 42.0 mm(24)
    • 52.0 mm(24)
    • 62.0 mm(29)
    • 64.0 mm(11)
    • 66.0 mm(8)
    • 80.0 mm(4)
    • 82.0 mm(4)
    • 9999.0 mm(1900)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 20.0 (3)
    • 45.0 (7)
    Countersunk Angle MinkomuCountersunk Angle Max
    Cutting Direction
    Cutting Direction
    • B (8)
    • E (661)
    • S (157)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (48)
    • NEUTRAL (ZERO) (235)
    • POSITIVE-ZERO (186)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.946 in(4)
    • 1.0 in(14)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.25 in(6)
    • 1.26 in(4)
    • 1.291 in(1)
    • 1.5 in(7)
    • 1.575 in(15)
    • 1.586 in(2)
    • 1.587 in(2)
    • 1.891 in(2)
    • 1.969 in(9)
    • 1.98 in(8)
    • 2.0 in(32)
    • 2.496 in(2)
    • 2.499 in(1)
    • 2.5 in(3)
    • 2.511 in(1)
    • 2.52 in(15)
    • 3.0 in(4)
    • 3.15 in(13)
    • 3.75 in(2)
    • 3.781 in(1)
    • 3.938 in(5)
    • 4.0 in(6)
    • 4.5 in(2)
    • 5.0 in(3)
    • 5.039 in(2)
    • 6.0 in(6)
    • 6.299 in(4)
    • 7.0 in(3)
    • 7.875 in(1)
    • 8.0 in(8)
    • 9.0 in(1)
    • 10.0 in(7)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 24.0 mm(4)
    • 25.401 mm(14)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 31.75 mm(6)
    • 32.0 mm(4)
    • 32.801 mm(1)
    • 38.1 mm(7)
    • 40.0 mm(15)
    • 40.276 mm(2)
    • 40.301 mm(2)
    • 48.0 mm(2)
    • 50.0 mm(9)
    • 50.301 mm(8)
    • 50.801 mm(32)
    • 63.401 mm(2)
    • 63.475 mm(1)
    • 63.5 mm(3)
    • 63.75 mm(1)
    • 64.0 mm(15)
    • 76.2 mm(4)
    • 80.0 mm(13)
    • 95.25 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(5)
    • 101.601 mm(6)
    • 114.301 mm(2)
    • 127.0 mm(3)
    • 128.0 mm(2)
    • 152.4 mm(6)
    • 160.0 mm(4)
    • 177.8 mm(3)
    • 200.0 mm(1)
    • 203.201 mm(8)
    • 228.601 mm(1)
    • 254.0 mm(7)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (9)
    • S (156)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • CARTRIDGE MOUNT (79)
    • SQUARE SHANK ADAPTER (20)
    Clamp Style
    Clamp Style
    • C (54)
    • N (197)
    • S (38)
    • Y (599)
    Cutting Width
    Cutting Width
    • 0.02 in(78)
    • 0.031 in(137)
    • 0.035 in(69)
    • 0.039 in(182)
    • 0.041 in(85)
    • 0.047 in(254)
    • 0.055 in(113)
    • 0.058 in(75)
    • 0.06 in(192)
    • 0.062 in(347)
    • 0.063 in(53)
    • 0.067 in(86)
    • 0.069 in(160)
    • 0.073 in(105)
    • 0.077 in(83)
    • 0.078 in(108)
    • 0.079 in(404)
    • 0.084 in(212)
    • 0.088 in(190)
    • 0.089 in(126)
    • 0.094 in(165)
    • 0.095 in(418)
    • 0.097 in(90)
    • 0.098 in(302)
    • 0.104 in(6)
    • 0.105 in(93)
    • 0.108 in(174)
    • 0.11 in(85)
    • 0.119 in(462)
    • 0.12 in(59)
    • 0.122 in(163)
    • 0.123 in(250)
    • 0.125 in(679)
    • 0.126 in(188)
    • 0.128 in(162)
    • 0.129 in(68)
    • 0.13 in(190)
    • 0.131 in(43)
    • 0.138 in(195)
    • 0.143 in(89)
    • 0.147 in(43)
    • 0.15 in(32)
    • 0.151 in(37)
    • 0.152 in(74)
    • 0.156 in(133)
    • 0.157 in(343)
    • 0.161 in(166)
    • 0.162 in(215)
    • 0.167 in(126)
    • 0.169 in(78)
    • 0.177 in(123)
    • 0.178 in(80)
    • 0.185 in(100)
    • 0.187 in(176)
    • 0.188 in(242)
    • 0.189 in(239)
    • 0.192 in(159)
    • 0.193 in(90)
    • 0.195 in(83)
    • 0.196 in(84)
    • 0.197 in(197)
    • 0.199 in(39)
    • 0.201 in(51)
    • 0.202 in(212)
    • 0.213 in(39)
    • 0.217 in(39)
    • 0.218 in(8)
    • 0.219 in(38)
    • 0.237 in(182)
    • 0.239 in(44)
    • 0.241 in(185)
    • 0.25 in(297)
    • 0.255 in(68)
    • 0.256 in(86)
    • 0.276 in(50)
    • 0.281 in(59)
    • 0.289 in(42)
    • 0.312 in(73)
    • 0.313 in(19)
    • 0.315 in(78)
    • 0.317 in(57)
    • 0.319 in(15)
    • 0.32 in(113)
    • 0.345 in(3)
    • 0.354 in(3)
    • 0.375 in(45)
    • 0.38 in(8)
    • 0.381 in(5)
    • 0.382 in(8)
    • 0.384 in(9)
    • 0.394 in(33)
    • 0.396 in(8)
    • 0.399 in(56)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(78)
    • 0.775 mm(123)
    • 0.8 mm(82)
    • 0.9 mm(69)
    • 1.0 mm(182)
    • 1.05 mm(85)
    • 1.201 mm(254)
    • 1.401 mm(113)
    • 1.475 mm(75)
    • 1.5 mm(192)
    • 1.576 mm(347)
    • 1.6 mm(53)
    • 1.701 mm(86)
    • 1.75 mm(160)
    • 1.826 mm(105)
    • 1.951 mm(83)
    • 1.975 mm(108)
    • 2.0 mm(404)
    • 2.125 mm(212)
    • 2.2 mm(158)
    • 2.225 mm(178)
    • 2.25 mm(126)
    • 2.375 mm(165)
    • 2.401 mm(418)
    • 2.475 mm(90)
    • 2.5 mm(302)
    • 2.625 mm(6)
    • 2.676 mm(93)
    • 2.75 mm(174)
    • 2.801 mm(85)
    • 3.0 mm(462)
    • 3.051 mm(59)
    • 3.1 mm(163)
    • 3.125 mm(250)
    • 3.176 mm(679)
    • 3.2 mm(188)
    • 3.25 mm(162)
    • 3.276 mm(68)
    • 3.301 mm(190)
    • 3.325 mm(43)
    • 3.5 mm(195)
    • 3.6 mm(89)
    • 3.725 mm(43)
    • 3.801 mm(32)
    • 3.825 mm(37)
    • 3.85 mm(74)
    • 3.95 mm(128)
    • 3.975 mm(45)
    • 4.0 mm(343)
    • 4.101 mm(166)
    • 4.125 mm(215)
    • 4.25 mm(126)
    • 4.3 mm(78)
    • 4.5 mm(123)
    • 4.525 mm(80)
    • 4.7 mm(100)
    • 4.75 mm(176)
    • 4.775 mm(242)
    • 4.801 mm(239)
    • 4.875 mm(159)
    • 4.9 mm(90)
    • 4.95 mm(83)
    • 4.976 mm(84)
    • 5.0 mm(197)
    • 5.051 mm(39)
    • 5.101 mm(51)
    • 5.125 mm(212)
    • 5.4 mm(39)
    • 5.5 mm(39)
    • 5.525 mm(8)
    • 5.551 mm(1)
    • 5.575 mm(37)
    • 6.0 mm(182)
    • 6.051 mm(44)
    • 6.125 mm(185)
    • 6.351 mm(297)
    • 6.476 mm(68)
    • 6.5 mm(86)
    • 7.0 mm(50)
    • 7.125 mm(59)
    • 7.325 mm(42)
    • 7.926 mm(73)
    • 7.95 mm(19)
    • 8.0 mm(78)
    • 8.05 mm(57)
    • 8.1 mm(15)
    • 8.125 mm(113)
    • 8.75 mm(3)
    • 9.0 mm(3)
    • 9.525 mm(45)
    • 9.65 mm(8)
    • 9.675 mm(5)
    • 9.701 mm(8)
    • 9.75 mm(9)
    • 10.0 mm(33)
    • 10.05 mm(8)
    • 10.125 mm(56)
    Cutting Width MinkomuCutting Width Max
    Front End Type
    Front End Type
    • MCS - Modular Cartridge System (79)
    • VKT - Square Shank (20)
    Insert Shape
    Insert Shape
    • PRISMATIC (2119)
    • TN-TOP NOTCH (2029)
    Cartridge Size
    Cartridge Size
    • 50 (43)
    • 65 (23)
    Front End Style
    Front End Style
    • MCS01 Modular Deep Grooving (79)
    • VKT01 Std Design (20)
    Insert Size
    Insert Size
    • 1 (5)
    • 10 (12)
    • 1F (12)
    • 2 (147)
    • 3 (146)
    • 4 (116)
    • 5 (70)
    • 6 (72)
    • 8 (30)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(29)
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.13 in(1)
    • 0.138 in(40)
    • 0.197 in(11)
    • 0.21 in(39)
    • 0.25 in(2)
    • 0.276 in(37)
    • 0.293 in(8)
    • 0.294 in(15)
    • 0.3 in(1)
    • 0.315 in(10)
    • 0.334 in(4)
    • 0.354 in(1)
    • 0.394 in(57)
    • 0.416 in(3)
    • 0.433 in(5)
    • 0.473 in(24)
    • 0.512 in(8)
    • 0.531 in(9)
    • 0.551 in(46)
    • 0.572 in(4)
    • 0.591 in(1)
    • 0.63 in(166)
    • 0.669 in(42)
    • 0.69 in(6)
    • 0.748 in(8)
    • 0.787 in(28)
    • 0.866 in(34)
    • 0.946 in(8)
    • 1.024 in(100)
    • 1.181 in(1)
    • 1.26 in(38)
    • 1.299 in(10)
    • 1.575 in(26)
    • 1.969 in(5)
    • 2.362 in(5)
    • 4.724 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(29)
    • 1.026 mm(1)
    • 1.6 mm(2)
    • 1.701 mm(1)
    • 1.776 mm(2)
    • 1.901 mm(1)
    • 3.301 mm(1)
    • 3.5 mm(40)
    • 5.0 mm(11)
    • 5.325 mm(39)
    • 6.351 mm(2)
    • 7.0 mm(37)
    • 7.45 mm(8)
    • 7.476 mm(15)
    • 7.625 mm(1)
    • 8.0 mm(10)
    • 8.475 mm(4)
    • 9.0 mm(1)
    • 10.0 mm(57)
    • 10.55 mm(3)
    • 11.0 mm(5)
    • 12.0 mm(24)
    • 13.0 mm(8)
    • 13.5 mm(9)
    • 14.0 mm(46)
    • 14.5 mm(4)
    • 15.0 mm(1)
    • 16.0 mm(166)
    • 17.0 mm(42)
    • 17.5 mm(6)
    • 19.0 mm(8)
    • 20.0 mm(28)
    • 22.0 mm(34)
    • 24.0 mm(8)
    • 26.0 mm(100)
    • 30.0 mm(1)
    • 32.0 mm(38)
    • 33.0 mm(10)
    • 40.0 mm(26)
    • 50.0 mm(5)
    • 60.0 mm(5)
    • 120.0 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 6 in(8)
    • 7 in(4)
    • 0.866 in(12)
    • 1.102 in(2)
    • 1.299 in(2)
    • 1.496 in(2)
    • 1.693 in(2)
    • 1.85 in(6)
    • 1.891 in(6)
    • 1.929 in(4)
    • 2.106 in(4)
    • 2.185 in(2)
    • 2.244 in(6)
    • 2.283 in(6)
    • 2.303 in(7)
    • 2.382 in(2)
    • 2.5 in(14)
    • 2.579 in(2)
    • 2.618 in(4)
    • 2.697 in(4)
    • 2.894 in(4)
    • 5.439 in(3)
    • 5.463 in(4)
    • 5.482 in(4)
    • 5.508 in(12)
    • 5.529 in(10)
    • 5.533 in(7)
    • 5.906 in(4)
    • 6.226 in(2)
    • 6.25 in(4)
    • 6.271 in(4)
    • 6.534 in(2)
    • 6.694 in(3)
    Gage Length
    Gage Length
    • 22 mm(12)
    • 47 mm(6)
    • 48 mm(6)
    • 57 mm(6)
    • 58 mm(6)
    • 150 mm(4)
    • 49 mm(4)
    • 170 mm(3)
    • 28 mm(2)
    • 33 mm(2)
    • 38 mm(2)
    • 43 mm(2)
    • 53.5 mm(4)
    • 55.5 mm(2)
    • 58.5 mm(7)
    • 60.5 mm(2)
    • 63.5 mm(14)
    • 65.5 mm(2)
    • 66.5 mm(4)
    • 68.5 mm(4)
    • 73.5 mm(4)
    • 138.15 mm(3)
    • 138.75 mm(4)
    • 139.25 mm(4)
    • 139.9 mm(12)
    • 140.4 mm(10)
    • 140.55 mm(7)
    • 152.4 mm(8)
    • 158.15 mm(2)
    • 158.75 mm(4)
    • 159.25 mm(4)
    • 165.951 mm(2)
    • 177.8 mm(4)
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.65 mm(10)
    • 0.75 mm(139)
    • 1.026 mm(236)
    • 1.1 mm(182)
    • 1.326 mm(13)
    • 1.651 mm(8)
    • 1.75 mm(6)
    • 1.901 mm(20)
    • 1.975 mm(10)
    • 2.0 mm(40)
    • 2.475 mm(7)
    • 2.5 mm(3)
    • 2.551 mm(9)
    • 2.575 mm(8)
    • 2.725 mm(6)
    • 2.75 mm(6)
    • 2.776 mm(2)
    • 2.901 mm(18)
    • 2.926 mm(146)
    • 3.0 mm(20)
    • 3.301 mm(12)
    • 3.401 mm(68)
    • 3.45 mm(8)
    • 3.5 mm(45)
    • 3.526 mm(6)
    • 3.6 mm(6)
    • 3.801 mm(61)
    • 3.85 mm(8)
    • 4.075 mm(7)
    • 4.101 mm(14)
    • 4.15 mm(8)
    • 4.2 mm(55)
    • 4.4 mm(11)
    • 4.5 mm(18)
    • 4.601 mm(1)
    • 4.75 mm(10)
    • 4.801 mm(7)
    • 4.9 mm(54)
    • 5.0 mm(1)
    • 5.301 mm(6)
    • 5.9 mm(12)
    • 6.0 mm(22)
    • 6.101 mm(6)
    • 6.25 mm(4)
    • 6.351 mm(2)
    • 6.4 mm(27)
    • 6.5 mm(8)
    • 7.301 mm(2)
    • 7.95 mm(5)
    • 8.1 mm(13)
    • 8.201 mm(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.027 in(10)
    • 0.03 in(139)
    • 0.04 in(236)
    • 0.044 in(182)
    • 0.053 in(13)
    • 0.065 in(8)
    • 0.069 in(6)
    • 0.075 in(20)
    • 0.078 in(10)
    • 0.079 in(40)
    • 0.097 in(7)
    • 0.098 in(3)
    • 0.1 in(9)
    • 0.101 in(8)
    • 0.107 in(6)
    • 0.108 in(6)
    • 0.109 in(2)
    • 0.114 in(18)
    • 0.115 in(146)
    • 0.119 in(20)
    • 0.13 in(12)
    • 0.134 in(68)
    • 0.136 in(8)
    • 0.138 in(45)
    • 0.139 in(6)
    • 0.143 in(6)
    • 0.15 in(61)
    • 0.152 in(8)
    • 0.16 in(7)
    • 0.161 in(14)
    • 0.163 in(8)
    • 0.165 in(55)
    • 0.174 in(11)
    • 0.177 in(18)
    • 0.181 in(1)
    • 0.187 in(10)
    • 0.189 in(7)
    • 0.193 in(54)
    • 0.197 in(1)
    • 0.209 in(6)
    • 0.232 in(12)
    • 0.237 in(22)
    • 0.24 in(6)
    • 0.246 in(4)
    • 0.25 in(2)
    • 0.252 in(27)
    • 0.256 in(8)
    • 0.288 in(2)
    • 0.313 in(5)
    • 0.319 in(13)
    • 0.323 in(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 2.757 in(3)
    • 3.543 in(2)
    • 4.724 in(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 70.0 mm(3)
    • 90.0 mm(2)
    • 120.0 mm(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    insertGeometry
    Shape
    Shape
    • PRISMATIC (1386)
    • TN-TOP NOTCH (1831)
    Insert Seat Size
    Insert Seat Size
    • 1 (27)
    • 10 (74)
    • 1F (12)
    • 2 (665)
    • 2B (18)
    • 2S (14)
    • 3 (1207)
    • 3S (24)
    • 4 (577)
    • 4S (14)
    • 5 (150)
    • 5S (16)
    • 6 (250)
    • 8 (163)
    Cutting Tool Material
    Cutting Tool Material
    • B H (319)
    • B L (683)
    • C A (6)
    • C N (338)
    • D P (250)
    • H T (436)
    • H W (4072)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (159)
    • BORING BAR HEAD (6)
    • CUTOFF BLADE (49)
    • Cutoff Blade (3)
    • SQUARE SHANK (609)
    System Size
    System Size
    • KM40TS (4)
    • KM4X63 (4)
    • KM50TS (8)
    • KM63TS (8)
    • KM63XMZ (11)
    • KM80ATC (8)
    • KM80TS (8)
    • PSC40 (4)
    • PSC50 (8)
    • PSC63 (8)
    • PSC80 (8)
    • VDI30 (10)
    • VDI40 (10)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(7)
    • 12.701 mm(9)
    • 15.875 mm(11)
    • 16.0 mm(9)
    • 19.0 mm(1)
    • 19.05 mm(14)
    • 20.0 mm(14)
    • 25.0 mm(16)
    • 25.401 mm(19)
    • 30.0 mm(10)
    • 31.701 mm(1)
    • 31.75 mm(10)
    • 32.0 mm(12)
    • 38.1 mm(9)
    • 40.0 mm(28)
    • 44.45 mm(3)
    • 50.0 mm(17)
    • 50.801 mm(9)
    • 57.151 mm(1)
    • 63.0 mm(31)
    • 63.5 mm(7)
    • 80.0 mm(24)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(7)
    • 0.5 in(9)
    • 0.625 in(11)
    • 0.63 in(9)
    • 0.748 in(1)
    • 0.75 in(14)
    • 0.787 in(14)
    • 0.984 in(16)
    • 1.0 in(19)
    • 1.181 in(10)
    • 1.248 in(1)
    • 1.25 in(10)
    • 1.26 in(12)
    • 1.5 in(9)
    • 1.575 in(28)
    • 1.75 in(3)
    • 1.969 in(17)
    • 2.0 in(9)
    • 2.25 in(1)
    • 2.48 in(31)
    • 2.5 in(7)
    • 3.15 in(24)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(10)
    • 0.394 in(9)
    • 0.473 in(32)
    • 0.5 in(36)
    • 0.606 in(1)
    • 0.625 in(28)
    • 0.63 in(27)
    • 0.748 in(6)
    • 0.75 in(79)
    • 0.787 in(98)
    • 0.939 in(1)
    • 0.984 in(92)
    • 1.0 in(99)
    • 1.024 in(22)
    • 1.214 in(2)
    • 1.25 in(43)
    • 1.26 in(61)
    • 1.5 in(11)
    • 1.53 in(4)
    • 1.575 in(6)
    • 1.848 in(1)
    • 2.067 in(2)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(10)
    • 10.0 mm(9)
    • 12.0 mm(32)
    • 12.701 mm(36)
    • 15.4 mm(1)
    • 15.875 mm(28)
    • 16.0 mm(27)
    • 19.0 mm(6)
    • 19.05 mm(79)
    • 20.0 mm(98)
    • 23.826 mm(1)
    • 25.0 mm(92)
    • 25.401 mm(99)
    • 26.0 mm(22)
    • 30.826 mm(2)
    • 31.75 mm(43)
    • 32.0 mm(61)
    • 38.1 mm(11)
    • 38.825 mm(4)
    • 40.0 mm(6)
    • 46.95 mm(1)
    • 52.5 mm(2)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.065 in(6)
    • 0.072 in(5)
    • 0.095 in(8)
    • 0.134 in(5)
    • 0.174 in(3)
    • 0.213 in(4)
    • 0.276 in(2)
    • 0.313 in(19)
    • 0.375 in(10)
    • 0.394 in(9)
    • 0.473 in(32)
    • 0.5 in(36)
    • 0.625 in(28)
    • 0.63 in(28)
    • 0.742 in(1)
    • 0.75 in(78)
    • 0.787 in(97)
    • 0.864 in(1)
    • 0.984 in(105)
    • 1.0 in(99)
    • 1.141 in(2)
    • 1.25 in(43)
    • 1.26 in(26)
    • 1.455 in(4)
    • 1.5 in(11)
    • 1.575 in(6)
    • 1.848 in(1)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 1.651 mm(6)
    • 1.8 mm(5)
    • 2.401 mm(8)
    • 3.401 mm(5)
    • 4.4 mm(3)
    • 5.4 mm(4)
    • 7.0 mm(2)
    • 7.95 mm(19)
    • 9.525 mm(10)
    • 10.0 mm(9)
    • 12.0 mm(32)
    • 12.701 mm(36)
    • 15.875 mm(28)
    • 16.0 mm(28)
    • 18.85 mm(1)
    • 19.05 mm(78)
    • 20.0 mm(97)
    • 21.951 mm(1)
    • 25.0 mm(105)
    • 25.401 mm(99)
    • 28.951 mm(2)
    • 31.75 mm(43)
    • 32.0 mm(26)
    • 36.95 mm(4)
    • 38.1 mm(11)
    • 40.0 mm(6)
    • 46.95 mm(1)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Drážkování Top Notch™
    (2031)

    Drážkování Top Notch™

    Beyond Evolution
    (1236)

    Beyond Evolution

    A4™ • Dvoustranné drážkování
    (1065)

    A4™ • Dvoustranné drážkování

    Keramika pro hluboké zapichování VG
    (6)

    Keramika pro hluboké zapichování VG

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk