Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Kenloc™ • M-Style Clamping • For Negative Style Inserts

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (681)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(681)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(681)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(681)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(681)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(681)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(681)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(681)
    • M Stainless Steel (680)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(680)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(680)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(680)
    • K Cast Iron (681)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(681)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(681)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(681)
    • N Non-Ferrous Materials (653)
      • N1
        Wrought Aluminum (653)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(653)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(340)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (653)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (653)
      • N6
        Carbon, Graphite Composites, CFRP (653)
      • N7
        MMC's (562)
    • S High-Temp Alloys (672)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(672)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(672)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(672)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(670)
    • H Hardened Materials (629)
      • H1
        Hardened Materials 44-48 HRC(629)
      • H2
        Hardened Materials 48-55 HRC(629)
      • H3
        Hardened Materials 56-60 HRC(536)
      • H4
        Hardened Materials >60 HRC(387)
    • C CFRP Materials (653)
      • C1
        CFRP, CFRP / CFRP (653)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (562)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (45)
    • FacingFacing (440)
    • ID FacingID Facing (2)
    • Multiple Direction CuttingMultiple Direction Cutting (439)
    • Plunge TurningPlunge Turning (55)
    • ProfilingProfiling (482)
    • TRN BoringTRN Boring (145)
    • TurningTurning (672)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (679)
    • Lightly Interrupted Cut (681)
    • Smooth Cut (681)
    • Varying Depth of Cut (676)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (60)
    • 48.0 (8)
    • 49.783 (2)
    • 50.0 (15)
    • 60.0 (12)
    • 62.5 (13)
    • 63.0 (4)
    • 72.5 (12)
    • 75.0 (144)
    • 90.0 (90)
    • 91.0 (1)
    • 93.0 (164)
    • 95.0 (122)
    • 107.5 (36)
    • 117.5 (2)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (119)
    • Toolholder (437)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (43)
    • 1.0 (341)
    • 2.0 (403)
    • 3.0 (126)
    • 4.0 (509)
    • 6.0 (143)
    • 8.0 (366)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.379 in(17)
    • 1.575 in(49)
    • 1.772 in(2)
    • 1.969 in(68)
    • 2.362 in(62)
    • 2.757 in(42)
    • 3.938 in(4)
    • 4.0 in(10)
    • 4.5 in(62)
    • 4.529 in(8)
    • 4.921 in(18)
    • 5.0 in(35)
    • 5.571 in(2)
    • 5.906 in(45)
    • 6.0 in(181)
    • 6.694 in(40)
    • 6.742 in(5)
    • 6.791 in(2)
    • 7.0 in(24)
    • 7.875 in(3)
    • 8.0 in(5)
    • 18.0 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 35.0 mm(17)
    • 40.0 mm(49)
    • 45.0 mm(2)
    • 50.0 mm(68)
    • 60.0 mm(62)
    • 70.0 mm(42)
    • 100.0 mm(4)
    • 101.601 mm(10)
    • 114.301 mm(62)
    • 115.0 mm(8)
    • 125.0 mm(18)
    • 127.0 mm(35)
    • 141.5 mm(2)
    • 150.0 mm(45)
    • 152.4 mm(181)
    • 170.0 mm(40)
    • 171.25 mm(5)
    • 172.5 mm(2)
    • 177.8 mm(24)
    • 200.0 mm(3)
    • 203.201 mm(5)
    • 457.201 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.004 in(281)
    • 0.008 in(281)
    • 0.014 in(47)
    • 0.016 in(507)
    • 0.024 in(21)
    • 0.031 in(635)
    • -0.039 in(43)
    • 0.047 in(630)
    • 0.062 in(79)
    • 0.063 in(545)
    • 0.094 in(117)
    • 0.095 in(328)
    • 0.125 in(43)
    • 0.126 in(142)
    • 0.157 in(36)
    • 0.188 in(1)
    • 0.25 in(20)
    • 0.375 in(6)
    • 0.5 in(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.1 mm(281)
    • 0.2 mm(281)
    • 0.351 mm(47)
    • 0.4 mm(507)
    • 0.601 mm(21)
    • 0.8 mm(635)
    • -1.0 mm(43)
    • 1.201 mm(630)
    • 1.576 mm(79)
    • 1.6 mm(545)
    • 2.375 mm(117)
    • 2.401 mm(328)
    • 3.176 mm(43)
    • 3.2 mm(142)
    • 4.0 mm(36)
    • 4.775 mm(1)
    • 6.351 mm(20)
    • 9.525 mm(6)
    • 12.701 mm(2)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (479)
    • 241 (79)
    • CL4 (311)
    • CM2 (463)
    • CM3 (361)
    • CM4 (226)
    • CPX (457)
    • CW2 (173)
    • CW2015 (196)
    • CW3020 (2)
    • CW5025 (208)
    • GX (260)
    • HK1500 (127)
    • HT2 (139)
    • HTX (126)
    • K060 (236)
    • K090 (605)
    • K1 (222)
    • K10M (541)
    • K10P (527)
    • K10U (422)
    • K15U (418)
    • K20K (596)
    • K21 (307)
    • K25M (479)
    • K25P (535)
    • K313 (620)
    • K35P (356)
    • K420 (514)
    • K45 (335)
    • K68 (615)
    • KB1340 (149)
    • KB1345 (179)
    • KB1610 (313)
    • KB1625 (292)
    • KB1630 (237)
    • KB5610 (211)
    • KB5625 (292)
    • KB5630 (190)
    • KB9610 (360)
    • KB9640 (190)
    • KBH10 (360)
    • KBH10B (284)
    • KBH20 (360)
    • KBH20B (284)
    • KBK35 (81)
    • KBK45 (2)
    • KC210 (360)
    • KC250 (368)
    • KC5010 (677)
    • KC5025 (605)
    • KC5410 (550)
    • KC5510 (595)
    • KC5525 (281)
    • KC710 (99)
    • KC720 (461)
    • KC722 (79)
    • KC730 (560)
    • KC7310 (603)
    • KC732 (416)
    • KC8050 (674)
    • KC810 (630)
    • KC850 (671)
    • KC9010 (592)
    • KC9025 (676)
    • KC910 (623)
    • KC9105 (544)
    • KC9110 (681)
    • KC9120 (658)
    • KC9125 (679)
    • KC9125RR (63)
    • KC9140 (673)
    • KC9145 (576)
    • KC9210 (47)
    • KC9215 (597)
    • KC9225 (612)
    • KC9240 (617)
    • KC9240NEW (611)
    • KC9245 (603)
    • KC9315 (640)
    • KC9320 (615)
    • KC9325 (624)
    • KC935 (664)
    • KC950 (636)
    • KC990 (673)
    • KCD25 (53)
    • KCK05 (617)
    • KCK05B (544)
    • KCK15 (610)
    • KCK15B (618)
    • KCK20 (615)
    • KCK20B (616)
    • KCM15 (598)
    • KCM15B (562)
    • KCM25 (611)
    • KCM25B (598)
    • KCM35 (577)
    • KCM35B (413)
    • KCP05 (475)
    • KCP05B (434)
    • KCP10 (679)
    • KCP10B (660)
    • KCP25 (679)
    • KCP25B (663)
    • KCP25C (677)
    • KCP30 (673)
    • KCP30B (538)
    • KCP40 (551)
    • KCP40B (630)
    • KCPK05 (575)
    • KCS10 (79)
    • KCS10B (557)
    • KCU10 (667)
    • KCU10B (653)
    • KCU25 (605)
    • KCU25B (605)
    • KD050 (335)
    • KD081 (337)
    • KD100 (205)
    • KD120 (350)
    • KD1400 (258)
    • KD1405 (190)
    • KD1425 (258)
    • KM1 (260)
    • KMF (79)
    • KS15 (79)
    • KT1120 (88)
    • KT125 (382)
    • KT150 (316)
    • KT175 (397)
    • KT315 (443)
    • KT325 (186)
    • KT5020 (105)
    • KTP10 (387)
    • KTP25S (305)
    • KU10T (426)
    • KU30T (640)
    • KY1310 (328)
    • KY1320 (523)
    • KY1525 (2)
    • KY1540 (279)
    • KY1615 (537)
    • KY2000 (337)
    • KY2100 (189)
    • KY3000 (557)
    • KY3400 (469)
    • KY3500 (561)
    • KY4000 (237)
    • KY4300 (226)
    • KY4400 (517)
    • KYHK15B (532)
    • KYK10 (257)
    • KYK25 (433)
    • KYK35 (559)
    • KYS25 (236)
    • KYS30 (257)
    • NL200 (126)
    • NL250 (580)
    • NL300 (449)
    • NL400 (209)
    • NL920 (366)
    • P25 (177)
    • PB100 (20)
    • PB170 (20)
    • PB250 (20)
    • PB300 (20)
    • PS5 (139)
    • SP0819 (391)
    • SP0A00 (25)
    • SP3019 (373)
    • SP4019 (353)
    • SP4036 (58)
    • SP4093 (58)
    • SP61EJ (55)
    • SPADAP (97)
    • SPN4W2 (14)
    • SPSREJ (26)
    • THM (94)
    • THM-X (81)
    • THMF-X (57)
    • TN10P (205)
    • TN10U (175)
    • TN15M (219)
    • TN15U (175)
    • TN2000 (141)
    • TN20K (235)
    • TN20P (235)
    • TN30M (219)
    • TN30P (203)
    • TN4000 (141)
    • TN5015 (184)
    • TN5020 (157)
    • TN5105 (145)
    • TN5120 (189)
    • TN6010 (118)
    • TN6025 (104)
    • TN7005 (99)
    • TN7010 (199)
    • TN7015 (209)
    • TN7025 (209)
    • TN7035 (202)
    • TN7105 (79)
    • TN7110 (175)
    • TN7115 (199)
    • TN7125 (177)
    • TN7135 (167)
    • TN8025 (199)
    • TTI15 (56)
    • TTM (9)
    • TTM09 (60)
    • TTR (54)
    • TTR-X (14)
    • TTS (121)
    • TTX (77)
    • W00342 (14)
    • WBH10C (154)
    • WBH10P (82)
    • WBH10U (130)
    • WBH20P (166)
    • WBH25P (119)
    • WBH25U (125)
    • WBH30P (82)
    • WBK40U (47)
    • WBK45U (100)
    • WDN00U (52)
    • WDN25U (105)
    • WK05CT (235)
    • WK15CT (114)
    • WK20CT (235)
    • WM15CT (229)
    • WM25CT (235)
    • WM35CT (229)
    • WP05CT (31)
    • WP15CT (245)
    • WP25CT (245)
    • WP35CT (245)
    • WS10PT (219)
    • WS25PT (229)
    • WU10HT (215)
    • WU10PT (134)
    • WU25PT (134)
    • X00511 (79)
    • X00580 (79)
    • X00581 (79)
    • X00582 (79)
    • X00583 (79)
    • X00584 (79)
    • X00585 (79)
    • X00586 (79)
    • X00591 (79)
    • X00592 (79)
    • X00593 (79)
    • X00594 (79)
    • X00596 (79)
    • X00597 (79)
    • X00599 (79)
    Hand Of Tool
    Hand Of Tool
    • L (226)
    • N (79)
    • R (251)
    Wiper Insert
    Wiper Insert
    • N (683)
    • Y (199)
    F Dimension
    F Dimension
    • 0.0 mm(19)
    • 6.351 mm(2)
    • 7.95 mm(2)
    • 8.0 mm(1)
    • 9.525 mm(6)
    • 10.0 mm(4)
    • 12.0 mm(5)
    • 12.226 mm(1)
    • 12.25 mm(1)
    • 12.5 mm(7)
    • 12.701 mm(16)
    • 13.75 mm(1)
    • 13.775 mm(1)
    • 15.8 mm(1)
    • 15.875 mm(12)
    • 16.0 mm(1)
    • 16.825 mm(1)
    • 17.0 mm(2)
    • 19.05 mm(10)
    • 19.075 mm(2)
    • 19.675 mm(1)
    • 19.701 mm(1)
    • 20.0 mm(4)
    • 20.5 mm(1)
    • 21.026 mm(2)
    • 22.0 mm(20)
    • 22.225 mm(6)
    • 22.35 mm(2)
    • 23.175 mm(5)
    • 24.0 mm(5)
    • 25.0 mm(11)
    • 25.201 mm(2)
    • 25.401 mm(46)
    • 25.5 mm(1)
    • 26.425 mm(1)
    • 27.0 mm(20)
    • 27.375 mm(2)
    • 28.026 mm(2)
    • 28.701 mm(2)
    • 30.0 mm(10)
    • 31.75 mm(81)
    • 31.776 mm(6)
    • 32.0 mm(51)
    • 33.551 mm(2)
    • 34.375 mm(2)
    • 35.0 mm(11)
    • 38.0 mm(8)
    • 38.1 mm(49)
    • 38.125 mm(3)
    • 38.375 mm(2)
    • 40.0 mm(10)
    • 40.5 mm(8)
    • 43.0 mm(12)
    • 44.95 mm(1)
    • 46.25 mm(3)
    • 48.0 mm(8)
    • 50.0 mm(2)
    • 50.801 mm(37)
    • 50.825 mm(1)
    • 53.0 mm(16)
    • 57.151 mm(1)
    • 57.651 mm(1)
    • 63.5 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(19)
    • 0.25 in(2)
    • 0.313 in(2)
    • 0.315 in(1)
    • 0.375 in(6)
    • 0.394 in(4)
    • 0.473 in(5)
    • 0.481 in(1)
    • 0.482 in(1)
    • 0.492 in(7)
    • 0.5 in(16)
    • 0.541 in(1)
    • 0.542 in(1)
    • 0.622 in(1)
    • 0.625 in(12)
    • 0.63 in(1)
    • 0.662 in(1)
    • 0.669 in(2)
    • 0.75 in(10)
    • 0.751 in(2)
    • 0.775 in(1)
    • 0.776 in(1)
    • 0.787 in(4)
    • 0.807 in(1)
    • 0.829 in(2)
    • 0.866 in(20)
    • 0.875 in(6)
    • 0.88 in(2)
    • 0.912 in(5)
    • 0.946 in(5)
    • 0.984 in(11)
    • 0.992 in(2)
    • 1.0 in(46)
    • 1.004 in(1)
    • 1.04 in(1)
    • 1.063 in(20)
    • 1.078 in(2)
    • 1.103 in(2)
    • 1.131 in(2)
    • 1.181 in(10)
    • 1.25 in(81)
    • 1.252 in(6)
    • 1.26 in(51)
    • 1.321 in(2)
    • 1.353 in(2)
    • 1.379 in(11)
    • 1.496 in(8)
    • 1.5 in(49)
    • 1.502 in(3)
    • 1.512 in(2)
    • 1.575 in(10)
    • 1.594 in(8)
    • 1.693 in(12)
    • 1.77 in(1)
    • 1.821 in(3)
    • 1.891 in(8)
    • 1.969 in(2)
    • 2.0 in(37)
    • 2.001 in(1)
    • 2.087 in(16)
    • 2.25 in(1)
    • 2.27 in(1)
    • 2.5 in(2)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • -1.0 mm(40)
    • 44.0 mm(2)
    • 54.0 mm(22)
    • 70.0 mm(27)
    • 80.0 mm(2)
    • 86.0 mm(34)
    • 90.0 mm(4)
    • 100.0 mm(25)
    • 106.0 mm(26)
    • 120.0 mm(2)
    • 150.0 mm(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • -0.039 in(40)
    • 1.732 in(2)
    • 2.126 in(22)
    • 2.757 in(27)
    • 3.15 in(2)
    • 3.386 in(34)
    • 3.543 in(4)
    • 3.938 in(25)
    • 4.173 in(26)
    • 4.724 in(2)
    • 5.906 in(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -0.039 in(43)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 mm(43)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (98)
    • E (73)
    • S (385)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (470)
    • NEGATIVE-ZERO (86)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.379 in(4)
    • 1.575 in(26)
    • 1.969 in(42)
    • 2.362 in(38)
    • 2.757 in(27)
    • 4.529 in(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 35.0 mm(4)
    • 40.0 mm(26)
    • 50.0 mm(42)
    • 60.0 mm(38)
    • 70.0 mm(27)
    • 115.0 mm(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (10)
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (188)
    • D-DIAMOND/RHOMBIC 55 (122)
    • R-ROUND (29)
    • S-SQUARE 90 (130)
    • T-TRIANGLE 60 (112)
    • V-DIAMOND/RHOMBIC 35 (73)
    • W-TRIGON 80 (31)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (442)
    • B L (405)
    • C A (626)
    • C N (595)
    • D P (320)
    • H T (458)
    • H W (683)
    backEnd
    Connection Type
    Connection Type
    • SQUARE SHANK (437)
    • TAPER SHANK (119)
    System Size
    System Size
    • KM32 (12)
    • KM32TS (6)
    • KM40TS (25)
    • KM50TS (23)
    • KM63TS (26)
    • KM80TS (27)
    Back-End Diameter
    Back-End Diameter
    • 32.0 mm(22)
    • 40.0 mm(49)
    • 50.0 mm(65)
    • 63.0 mm(70)
    • 80.0 mm(42)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.26 in(22)
    • 1.575 in(49)
    • 1.969 in(65)
    • 2.48 in(70)
    • 3.15 in(42)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.5 in(9)
    • 0.625 in(10)
    • 0.63 in(4)
    • 0.75 in(54)
    • 0.787 in(18)
    • 0.984 in(47)
    • 1.0 in(112)
    • 1.25 in(82)
    • 1.26 in(47)
    • 1.5 in(48)
    • 1.575 in(3)
    • 2.0 in(3)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 12.701 mm(9)
    • 15.875 mm(10)
    • 16.0 mm(4)
    • 19.05 mm(54)
    • 20.0 mm(18)
    • 25.0 mm(47)
    • 25.401 mm(112)
    • 31.75 mm(82)
    • 32.0 mm(47)
    • 38.1 mm(48)
    • 40.0 mm(3)
    • 50.801 mm(3)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.5 in(10)
    • 0.625 in(10)
    • 0.63 in(4)
    • 0.75 in(55)
    • 0.787 in(18)
    • 0.984 in(69)
    • 1.0 in(118)
    • 1.25 in(74)
    • 1.26 in(25)
    • 1.5 in(48)
    • 1.575 in(3)
    • 2.0 in(3)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 12.701 mm(10)
    • 15.875 mm(10)
    • 16.0 mm(4)
    • 19.05 mm(55)
    • 20.0 mm(18)
    • 25.0 mm(69)
    • 25.401 mm(118)
    • 31.75 mm(74)
    • 32.0 mm(25)
    • 38.1 mm(48)
    • 40.0 mm(3)
    • 50.801 mm(3)
    Shank Width MinkomuShank Width Max
    No filters matching ""

    KM™ Nástroje pro rychlou výměnu

    (248)KM™ Nástroje pro rychlou výměnu

    MVVN 72° 30'

    (1)MVVN 72° 30'

    MWLN 95°

    (2)MWLN 95°

    MVJN 93°

    (2)MVJN 93°

    MVUN 93°

    (2)MVUN 93°

    MTUN 93°

    (2)MTUN 93°

    MVHN 107° 30'

    (2)MVHN 107° 30'

    MTJN 93°

    (2)MTJN 93°

    MSDN 45°

    (3)MSDN 45°

    MSKN 75°

    (4)MSKN 75°

    MSSN 45°

    (6)MSSN 45°

    MDQN 107° 30'

    (4)MDQN 107° 30'

    MDUN 93°

    (4)MDUN 93°

    MRGN 0°

    (2)MRGN 0°

    MDJN 93°

    (4)MDJN 93°

    MCRN 75°

    (4)MCRN 75°

    MCLN 95°

    (6)MCLN 95°
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?