Helix Angle: 37°/39°
Ramping: Blank
Side Milling/Shoulder Milling: Square End
Tool Dimensions: Flute Configuration: 6
Corner Style: Corner RadiusDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 6072217 |
| ISO katalogové ID | UJDV0500Y6CQC |
| ANSI katalogové ID | UJDV0500Y6CQC |
| Grade | KCSM15 |
Helix Angle: 37°/39°Ramping: BlankSide Milling/Shoulder Milling: Square EndTool Dimensions: Flute Configuration: 6Corner Style: Corner RadiusKarbidy
KCSM15
Coated carbide grade with thick PVD coating and optimized chemistry
and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina |  |  | |||||||||||||||||
| Boční frézování (A) | krátké | střední | dlouhé | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||||
| A | s adaptérem | Průměr D1 | |||||||||||||||||
| KCSM15 | KCSM15 | KCSM15 | |||||||||||||||||
| Řezná rychlost | Řezná rychlost | Řezná rychlost | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | ||||||||||
| ap | ae | Min | Max | Min | Max | Min | Max | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | 1.2500 | |||||
| P | 4 | Ap max | 0.4 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | .0034 |
| 5 | Ap max | 0.4 x D | 200 | – | 330 | 170 | – | 280.5 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 | |
| M | 1 | Ap max | 0.4 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 |
| 2 | Ap max | 0.4 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 | |
| 3 | Ap max | 0.4 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| S | 1 | Ap max | 0.4 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 |
| 2 | Ap max | 0.4 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
| 3 | Ap max | 0.4 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
| 4 | Ap max | 0.4 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0030 | .0030 | |
| H | 1 | Ap max | 0.4 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | .0034 |
| 2 | Ap max | 0.4 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| Materiálová skupina | | | |||||||||||||||
| Boční frézování (A) | krátké | střední | dlouhé | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||
| A | s adaptérem | Průměr D1 | |||||||||||||||
| KCSM15 | KCSM15 | KCSM15 | |||||||||||||||
| Řezná rychlost | Řezná rychlost | Řezná rychlost | frac. | 5/8 | 3/4 | 1 | 1 1/4 | ||||||||||
| ap | ae | Min | Max | Min | Max | Min | Max | dec. | .6250 | .7500 | 1.0000 | 1.2500 | |||||
| P | 5 | Ap max | 0.06 x D | 560 | – | 940 | 504 | – | 846 | 504 | – | 846 | IPT | .0036 | .0040 | .0048 | .0048 |
| 6 | Ap max | 0.06 x D | 370 | – | 620 | 314 | – | 527 | 296 | – | 496 | IPT | .0033 | .0037 | .0047 | .0047 | |
| M | 1 | Ap max | 0.06 x D | 560 | – | 720 | 448 | – | 576 | 392 | – | 504 | IPT | .0041 | .0046 | .0058 | .0058 |
| 2 | Ap max | 0.06 x D | 370 | – | 500 | 296 | – | 400 | 259 | – | 350 | IPT | .0033 | .0037 | .0047 | .0047 | |
| 3 | Ap max | 0.06 x D | 370 | – | 440 | 296 | – | 352 | 259 | – | 308 | IPT | .0027 | .0030 | .0035 | .0035 | |
| S | 1 | Ap max | 0.06 x D | 310 | – | 560 | 248 | – | 448 | 186 | – | 336 | IPT | .0041 | .0046 | .0058 | .0058 |
| 2 | Ap max | 0.06 x D | 310 | – | 560 | 248 | – | 448 | 186 | – | 336 | IPT | .0041 | .0046 | .0058 | .0058 | |
| 3 | Ap max | 0.06 x D | 160 | – | 250 | 128 | – | 200 | 96 | – | 150 | IPT | .0022 | .0025 | .0032 | .0032 | |
| 4 | Ap max | 0.06 x D | 310 | – | 370 | 248 | – | 296 | 186 | – | 222 | IPT | .0030 | .0034 | .0043 | .0043 | |
| H | 1 | Ap max | 0.06 x D | 500 | – | 870 | 400 | – | 696 | 300 | – | 522 | IPT | .0036 | .0040 | .0048 | .0048 |
| 2 | Ap max | 0.06 x D | 440 | – | 750 | 352 | – | 600 | 264 | – | 450 | IPT | .0027 | .0030 | .0035 | .0035 | |
| Tolerance stopkových fréz | |
| D1 | tolerance e8 |
| 13/32 | -0,00126"/-0,00232" |
| 23/32 | -0,00157"/-0,00287" |
| -0,00197''/-0,00350'' | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?