Helical Milling
Ramping: Blank
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 1888209 |
| ISO katalogové ID | 66A05RSMORD16 |
| ANSI katalogové ID | 66A05RSMORD16 |
| [D1MAX] Maximum Cutting Diameter | 66 mm |
| [D1MAX] Maximum Cutting Diameter | 2.598 in |
| [D1] Effective Cutting Diameter | 50 mm |
| [D1] Effective Cutting Diameter | 1.968 in |
| [D] Adapter / Shank / Bore Diameter | 27 mm |
| [D] Adapter / Shank / Bore Diameter | 1.063 in |
| [D6] Hub Diameter | 50 mm |
| [D6] Hub Diameter | 1.969 in |
| [L] Overall Length | 50 mm |
| [L] Overall Length | 1.969 in |
| [AP1MAX] 1st Maximum Cutting Depth | 8 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .315 in |
| Number of Inserts | 5 |
| Maximum Ramping Angle | 4 |
| Weight Kilograms | 0.55 |
| Gage Insert | RD_X1604M0__ |
Helical MillingRamping: BlankSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Side and FacePocketingVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .F..LP | KC725M | .S..GN | KC725M | .S..HP | KC725M |
| P3–P4 | .S..HP | KC522M | .S..HP | KCPK30 | .S..HN | KC725M |
| P5–P6 | .S..HP | KC522M | .S..HP | KCPM20 | .S..HN | KCPM20 |
| M1–M2 | – | – | .S..HP | KC725M | – | – |
| M3 | – | – | .S..HP | KC725M | – | – |
| K1–K2 | .S..HN | KC510M | .S..HP | KCPK30 | .S..HP | KCPK30 |
| K3 | .S..HN | KC510M | .S..HP | KCPK30 | .S..HP | KCPK30 |
| N1–N2 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| N3 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| S1–S2 | – | – | .S..HP | KC725M | – | – |
| S3 | – | – | .S..HP | KC725M | – | – |
| S4 | – | – | .S..HP | KC725M | – | – |
| H1 | .S..GN | KC510M | .S..HN | KC510M | .S..HN | KCPM20 |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | 0,05 | 0,10 | 0,20 | .F..LP |
| .S..GN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .S..GN |
| .S..HP | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .S..HP |
| .S..HN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .S..HN |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,10 | 0,19 | 0,39 | 0,07 | 0,14 | 0,29 | 0,06 | 0,13 | 0,25 | 0,06 | 0,12 | 0,24 | 0,06 | 0,12 | 0,23 | .F..LP |
| .S..GN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .S..GN |
| .S..HP | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .S..HP |
| .S..HN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .S..HN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,13 | 0,25 | 0,51 | 0,10 | 0,19 | 0,38 | 0,08 | 0,17 | 0,33 | 0,08 | 0,15 | 0,31 | 0,08 | 0,15 | 0,30 | .F..LP |
| .S..GN | 0,26 | 0,64 | 1,04 | 0,19 | 0,48 | 0,77 | 0,17 | 0,42 | 0,67 | 0,16 | 0,39 | 0,63 | 0,15 | 0,38 | 0,61 | .S..GN |
| .S..HP | 0,26 | 0,64 | 1,04 | 0,19 | 0,48 | 0,77 | 0,17 | 0,42 | 0,67 | 0,16 | 0,39 | 0,63 | 0,15 | 0,38 | 0,61 | .S..HP |
| .S..HN | 0,26 | 0,64 | 1,04 | 0,19 | 0,48 | 0,77 | 0,17 | 0,42 | 0,67 | 0,16 | 0,39 | 0,63 | 0,15 | 0,38 | 0,61 | .S..HN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,18 | 0,35 | 0,69 | 0,13 | 0,26 | 0,52 | 0,11 | 0,23 | 0,45 | 0,11 | 0,21 | 0,42 | 0,10 | 0,21 | 0,41 | .F..LP |
| .S..GN | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,54 | 0,86 | 0,21 | 0,52 | 0,84 | .S..GN |
| .S..HP | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,54 | 0,86 | 0,21 | 0,52 | 0,84 | .S..HP |
| .S..HN | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,54 | 0,86 | 0,21 | 0,52 | 0,84 | .S..HN |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 545 | 475 | 440 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 335 | 305 | 275 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 305 | 275 | 250 | |
| 4 | 295 | 240 | 200 | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 225 | 210 | 190 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 310 | 275 | 255 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 190 | 165 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 250 | 220 | 190 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 225 | 195 | 170 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 175 | 160 | 140 | |
| K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 355 | 320 | 285 |
| 2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 280 | 255 | 230 | |
| 3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 235 | 210 | 195 | |
| N | 1–2 | 770 | 685 | 630 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
| H | 1 | 190 | 155 | 110 | 145 | 110 | 85 | – | – | – | 170 | 140 | 115 | – | – | – |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 1000 | 900 | 820 | |
| 4 | 960 | 780 | 660 | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 570 | 520 | 460 | |
| K | 1 | 1150 | 1040 | 940 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 1160 | 1050 | 940 |
| 2 | 910 | 820 | 760 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 920 | 830 | 760 | |
| 3 | 770 | 680 | 620 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 770 | 690 | 640 | |
| N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | 630 | 510 | 360 | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?