Helical Milling
Ramping: Blank
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Shank - Cylindrical Weldon
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 1888463 |
| ISO katalogové ID | 15E02R120B25SRD07 |
| ANSI katalogové ID | 15E02R120B25SRD07 |
| [D1MAX] Maximum Cutting Diameter | 15 mm |
| [D1MAX] Maximum Cutting Diameter | .5906 in |
| [D1] Effective Cutting Diameter | 8 mm |
| [D1] Effective Cutting Diameter | .315 in |
| [D] Adapter / Shank / Bore Diameter | 25 mm |
| [D] Adapter / Shank / Bore Diameter | .9843 in |
| [L] Overall Length | 177 mm |
| [L] Overall Length | 6.968 in |
| [L1] Gage Length | 177 mm |
| [L1] Gage Length | 6.968 in |
| [L2] Head Length | 120 mm |
| [L2] Head Length | 4.724 in |
| [L3] Usable Length | 40 mm |
| [L3] Usable Length | 1.574 in |
| [AP1MAX] 1st Maximum Cutting Depth | 3.5 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .1378 in |
| Number of Inserts | 2 |
| Maximum Ramping Angle | 4.5 |
| Weight Kilograms | 0.4 |
| Gage Insert | RD_X0702__ |
Helical MillingRamping: BlankSide Milling/Shoulder Milling: Ball Nose3D ProfilingShank - Cylindrical WeldonPocketingVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .F..LP | KC522M | .F..LP | KC725M | .S..LN | KC725M |
| P3–P4 | .S..LN | KCPM20 | .S..LN | KC522M | .S..LN | KC725M |
| P5–P6 | .S..LN | KC510M | .S..LN | KCPM20 | .S..LN | KCPM20 |
| M1–M2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
| M3 | .F..LP | KC725M | – | – | – | – |
| K1–K2 | .F..LP | KC510M | .S..LN | KC510M | .S..LN | KC510M |
| K3 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KC510M |
| N1–N2 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| N3 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| S1–S2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
| S3 | .F..LP | KC725M | – | – | – | – |
| S4 | .F..LP | KC725M | – | – | – | – |
| H1 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KCPM20 |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,08 | 0,13 | 0,33 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,22 | 0,05 | 0,08 | 0,20 | 0,05 | 0,08 | 0,20 | .F..LP |
| .S..LN | 0,14 | 0,41 | 0,68 | 0,11 | 0,31 | 0,51 | 0,09 | 0,27 | 0,44 | 0,09 | 0,25 | 0,41 | 0,09 | 0,24 | 0,41 | .S..LN |
| .T..LN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .T..LN |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,10 | 0,15 | 0,39 | 0,07 | 0,12 | 0,29 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,24 | 0,06 | 0,09 | 0,23 | .F..LP |
| .S..LN | 0,17 | 0,47 | 0,79 | 0,12 | 0,35 | 0,59 | 0,11 | 0,31 | 0,51 | 0,10 | 0,29 | 0,48 | 0,10 | 0,28 | 0,47 | .S..LN |
| .T..LN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,16 | 0,26 | 0,65 | 0,12 | 0,19 | 0,49 | 0,11 | 0,17 | 0,42 | 0,10 | 0,16 | 0,40 | 0,10 | 0,16 | 0,39 | .F..LP |
| .S..LN | 0,28 | 0,80 | 1,33 | 0,21 | 0,59 | 0,99 | 0,18 | 0,52 | 0,86 | 0,17 | 0,48 | 0,81 | 0,17 | 0,47 | 0,79 | .S..LN |
| .T..LN | 0,33 | 0,83 | 1,33 | 0,25 | 0,62 | 0,99 | 0,22 | 0,54 | 0,86 | 0,20 | 0,50 | 0,81 | 0,20 | 0,49 | 0,79 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,12 | 0,19 | 0,48 | 0,09 | 0,14 | 0,36 | 0,08 | 0,12 | 0,31 | 0,07 | 0,12 | 0,29 | 0,07 | 0,11 | 0,29 | .F..LP |
| .S..LN | 0,21 | 0,58 | 0,98 | 0,15 | 0,44 | 0,73 | 0,13 | 0,38 | 0,63 | 0,13 | 0,36 | 0,59 | 0,12 | 0,35 | 0,58 | .S..LN |
| .T..LN | 0,24 | 0,61 | 0,98 | 0,18 | 0,45 | 0,73 | 0,16 | 0,40 | 0,63 | 0,15 | 0,37 | 0,59 | 0,15 | 0,36 | 0,58 | .T..LN |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 440 | 360 | 310 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 270 | 225 | 190 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 245 | 205 | 170 | |
| 4 | 295 | 240 | 200 | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 185 | 160 | 130 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 255 | 205 | 175 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 150 | 125 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 285 | 235 | 200 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 260 | 220 | 185 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 195 | 160 | – | |
| K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 275 | 235 | 195 |
| 2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 220 | 180 | 160 | |
| 3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 185 | 150 | 130 | |
| N | 1–2 | 770 | 685 | 630 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 695 | 640 | 585 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
| H | 1 | 190 | 155 | 110 | 145 | 110 | 85 | – | – | – | 170 | 140 | 115 | – | – | – |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1440 | 1180 | 1010 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 890 | 740 | 620 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 800 | 670 | 560 | |
| 4 | 960 | 780 | 660 | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 600 | 520 | 430 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 830 | 680 | 580 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 500 | 410 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 940 | 770 | 650 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 850 | 720 | 600 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 640 | 530 | – | |
| K | 1 | 1150 | 1040 | 940 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 910 | 770 | 640 |
| 2 | 910 | 820 | 760 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 720 | 590 | 520 | |
| 3 | 770 | 680 | 620 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 600 | 500 | 420 | |
| N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | 630 | 510 | 360 | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
