Drilling: Stacked Plates
Drilling
Drilling: Inclined Exit
Tool Dimensions: 2flute/4margin/coolant
DIN number 6535
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 3891684 |
| ISO katalogové ID | B271Z11000HPS |
| ANSI katalogové ID | B271Z11000HPS |
| Grade | KN25 |
| [D1] Drill Diameter M | 11 mm |
| [D1] Drill Diameter M | .4331 in |
| [L] Overall Length | 238 mm |
| [L] Overall Length | 9.37 in |
| [L3] Flute Length | 189 mm |
| [L3] Flute Length | 7.44 in |
| [L4] Maximum Drilling Depth | 165 mm |
| [L4] Maximum Drilling Depth | 6.496 in |
| [L5] Drill Point Length | 2.03 mm |
| [L5] Drill Point Length | .0799 in |
| [LS] Shank Length | 46 mm |
| [LS] Shank Length | 1.811 in |
| [D] Adapter / Shank / Bore Diameter | 11 mm |
| [D] Adapter / Shank / Bore Diameter | .4331 in |
Drilling: Stacked PlatesDrillingDrilling: Inclined ExitTool Dimensions: 2flute/4margin/coolantDIN number 6535Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°Drilling: Cross-Hole DrillingKarbidy
KN25
Composition: Uncoated, highly wear-resistant ultra-fine-grain carbide.
Application: Highly polished chip flute surfaces ensure superior chip evacuation and reduce tendency for built-up edges. First choice for deep-hole drilling of non-ferrous materials.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Tolerance • Palcové | ||||
| Rozsah nominálních průměrů | Tolerance D1 m7 | |||
| .0394–.1181 | .0000/-.0004 | .0000/-.0006 | ||
| .0002/.0006 | .0000/-.0003 | |||
| .0002/.0008 | .0000/-.0004 | |||
| .0003/.0010 | .0000/-.0004 | |||
| Materiálová skupina |  |  | |||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | |||
| N | 1 | 120 | 200 | 300 | mm/ot | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/ot | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
| Materiálová skupina | | | |||||||||||
| Materiálová skupina | Řezná rychlost | Palcové | |||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 0.551 | 5/8 .625 | |||
| N | 1 | 390 | 660 | 980 | IPR | .005–.007 | .005–.007 | .006–.009 | .008–.011 | .010–.014 | .012–.016 | .014–.018 | .016–.020 |
| 2 | 390 | 560 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 3 | 330 | 490 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 4 | 260 | 660 | 980 | IPR | .001–.002 | .001–.002 | .001–.002 | .002–.002 | .002–.003 | .002–.003 | .002–.003 | .002–.004 | |
| | ||||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | ||
| N | 1 | 120 | 200 | 300 | mm/ot | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/ot | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?