Ramping: Blank
Slotting: Ball Nose
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5175382 |
| ISO katalogové ID | KSRM300R4307S100L197 |
| ANSI katalogové ID | KSRM300R4307S100L197 |
| [D1MAX] Maximum Cutting Diameter | 76.2 mm |
| [D1MAX] Maximum Cutting Diameter | 3 in |
| [D1] Effective Cutting Diameter | 63.5 mm |
| [D1] Effective Cutting Diameter | 2.5 in |
| [D] Adapter / Shank / Bore Diameter | 25.4 mm |
| [D] Adapter / Shank / Bore Diameter | 1 in |
| [D6] Hub Diameter | 69.85 mm |
| [D6] Hub Diameter | 2.75 in |
| [L] Overall Length | 50 mm |
| [L] Overall Length | 1.969 in |
| [AP1MAX] 1st Maximum Cutting Depth | 6.35 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .25 in |
| Number of Inserts | 7 |
| Maximum Ramping Angle | 6.35 |
| Max RPM | 24400 |
| Gage Insert | RP_T43____ |
| Weight Pounds | 2.48 |
Ramping: BlankSlotting: Ball NoseSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Through CoolantMilling - Side and FacePocketingVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| P3–P4 | .E..LEJ | KC725M | .S..GE | KCPK30 | – | – |
| P5–P6 | .E..GE | KCPK30 | .S..GE | KCPK30 | – | – |
| M1–M2 | .E..LEJ | KC725M | .E..LEJ | KC725M | .S..GE | KC725M |
| M3 | .S..GEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| K1–K2 | – | – | .S..GE | KCPK30 | – | – |
| K3 | – | – | .S..GE | KCPK30 | – | – |
| N1–N2 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| N3 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| S1–S2 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S3 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S4 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KC725M |
| H1 | – | – | .S..GE | KC522M | – | – |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | .E..LEJ |
| .E..GE | .006 | .010 | .015 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .006 | .009 | .004 | .006 | .009 | .E..GE |
| .S..GEJ | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GEJ |
| .S..GE | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GE |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .004 | .006 | .008 | .003 | .004 | .006 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .005 | .E..LEJ |
| .E..GE | .007 | .012 | .017 | .005 | .009 | .013 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .007 | .010 | .E..GE |
| .S..GEJ | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GEJ |
| .S..GE | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GE |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .007 | .010 | .015 | .005 | .007 | .011 | .005 | .006 | .009 | .004 | .006 | .009 | .004 | .006 | .009 | .E..LEJ |
| .E..GE | .012 | .021 | .031 | .009 | .016 | .023 | .008 | .014 | .020 | .007 | .013 | .018 | .007 | .012 | .018 | .E..GE |
| .S..GEJ | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GEJ |
| .S..GE | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GE |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .005 | .007 | .011 | .004 | .005 | .008 | .003 | .005 | .007 | .003 | .004 | .006 | .003 | .004 | .006 | .E..LEJ |
| .E..GE | .009 | .015 | .023 | .007 | .011 | .017 | .006 | .010 | .014 | .005 | .009 | .014 | .005 | .009 | .013 | .E..GE |
| .S..GEJ | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GEJ |
| .S..GE | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GE |
| Material Group | KC422M | KC522M | KC725M | KCPK30 | |||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | – | – | – | 900 | 820 | 720 | – | – | – | 1160 | 1050 | 940 |
| 2 | – | – | – | 710 | 640 | 590 | – | – | – | 920 | 830 | 760 | |
| 3 | – | – | – | 590 | 530 | 480 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | 4220 | 3720 | 3440 | – | – | – | – | – | – | – | – | – |
| 3 | 3720 | 3440 | 3000 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | 470 | 360 | 280 | – | – | – | – | – | – |
| catalog number | Maximum Ramp Angle (ra) when hx = .01" and ae | Maximum Ramp Depth (ap) per pass when ae | Maximum Ramp Depth (ap) per pass when hx = .01" and ae ae1 | ae1 | Maximum Plunge Depth (ap) when hx = .01" and ae | ae2 | min hole diameter (DH min) | max flat-bottom hole diameter (DH1 max) | Maximum Hole Diameter (No Flat Bottom) |
| KSRM125R4303C125L600 | 5.30° | .055 | .250 | .406 | .250 | .500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302C125L600 | 5.95° | .061 | .250 | .413 | .250 | .500 | 1.674 | 2.001 | 2.500 |
| KSRM125R4303C125L1000 | 5.30° | .055 | .250 | .406 | .250 | .500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302C125L1000 | 5.95° | .061 | .250 | .413 | .250 | .500 | 1.674 | 2.001 | 2.500 |
| KSRM150R4304C125L600 | 4.74° | .069 | .250 | .421 | .250 | .500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303C125L600 | 5.31° | .077 | .250 | .429 | .250 | .500 | 2.142 | 2.502 | 3.000 |
| KSRM150R4304C125L1000 | 4.74° | .069 | .250 | .421 | .250 | .500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303C125L1000 | 5.31° | .077 | .250 | .429 | .250 | .500 | 2.142 | 2.502 | 3.000 |
| KSRM125R4303M16L150 | 5.30° | .055 | .250 | .406 | .250 | .500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302M16L150 | 6.43° | .065 | .250 | .418 | .250 | .500 | 1.665 | 2.001 | 2.500 |
| KSRM150R4304M16L150 | 4.74° | .069 | .250 | .421 | .250 | .500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303M16L150 | 5.31° | .077 | .250 | .429 | .250 | .500 | 2.142 | 2.502 | 3.000 |
| KSRM200R4305S075L197 | 11.43° | .250 | .250 | .499 | .250 | .500 | 3.001 | 3.501 | 4.000 |
| KSRM200R4303S075L197 | 11.45° | .250 | .250 | .499 | .250 | .500 | 3.001 | 3.501 | 4.000 |
| KSRM250R4306S075L197 | 8.16° | .250 | .250 | .500 | .250 | .500 | 4.001 | 4.500 | 5.000 |
| KSRM250R4304S075L197 | 8.16° | .250 | .250 | .500 | .250 | .500 | 4.001 | 4.500 | 5.000 |
| KSRM300R4307S100L197 | 6.35° | .250 | .250 | .500 | .250 | .500 | 5.001 | 5.500 | 6.000 |
| KSRM300R4305S100L197 | 6.35° | .250 | .250 | .500 | .250 | .500 | 5.001 | 5.500 | 6.000 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?