Produkt podobný k:
Břitové destičky pro KSSM 8+ • SNHJ12-ELD
Výměnné břitové destičky
Objednací číslo5418802
ISO katalogové IDSNHJ120616ENLDANSI katalogové IDSNHJ444ENLD
- P Steel
- M Stainless Steel
- K Cast Iron
- S High-Temp Alloys
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Objednací číslo | 5418802 |
ISO katalogové ID | SNHJ120616ENLD |
ANSI katalogové ID | SNHJ444ENLD |
Grade | KCPK30 |
[D] Insert IC Size | 12.7 mm |
[D] Insert IC Size | .5 in |
[S] Insert Thickness | 6.35 mm |
[S] Insert Thickness | .25 in |
[L10] Insert Cutting Edge Length | 12.7 mm |
[L10] Insert Cutting Edge Length | .5 in |
[Rε] Corner Radius | 1.6 mm |
[Rε] Corner Radius | .063 in |
Average Chip Thickness [HM] | 0.055 mm |
Average Chip Thickness [HM] | .0022 in |
Cutting Edges per Insert | 8 |
Materiály obrobků
- Steel
- Stainless Steel
- Cast Iron
- High-Temp Alloys
Vlastnosti a výhody
- První volba pro lehké obrábění litin a ocelí.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
Výběr břitové destičky
Výběr břitové destičky
HARVI™ Ultra 8X • Insert Selection Guide II - using inserts KSSM8+ (SNPJ12-GD) | ||||||
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GD | KCPM40 |
P3–P4 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GD | KCPM40 |
P5–P6 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GD | KCPM40 |
M1–M2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GD | KCPM40 |
M3 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GD | KCPM40 |
K1–K2 | .S..GD | KCK20B | .S..GD | KCK20B | .S..GD | KCK15 |
K3 | .S..GD | KCK20B | .S..GD | KCK20B | .S..GD | KCK20B |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
HARVI™ Ultra 8X • Insert Selection Guide I | ||||||
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .E..LEH | KCSM40 | .E..LEH | KCSM40 | .S..GDH | KCSM40 |
P3–P4 | .E..LEH | KCSM40 | .E..LEH | KCSM40 | .S..GDH | KCSM40 |
P5–P6 | .E..LEH | KCSM40 | .E..LEH | KCSM40 | .S..GDH | KCSM40 |
M1–M2 | .E..LEH | KCSM40 | .E..LEH | KCSM40 | .S..GDH | KCSM40 |
M3 | .E..LEH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
K1–K2 | – | – | – | – | – | – |
K3 | – | – | – | – | – | – |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | .E..LEH | KCSM40 | .E..LEH | KCSM40 | .S..GDH | KCSM40 |
S3 | .E..LEH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
S4 | .E..LEH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
H1 | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use