KSRM™ • Daisy Series

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (146)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(137)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(137)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(137)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(137)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(137)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(146)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(146)
    • M Stainless Steel (146)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(146)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(146)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(146)
    • K Cast Iron (103)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(103)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(103)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(103)
    • N Non-Ferrous Materials (30)
      • N1
        Wrought Aluminum (30)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(30)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(30)
    • S High-Temp Alloys (145)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(132)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(132)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(132)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(145)
    • H Hardened Materials (85)
      • H1
        Hardened Materials 44-48 HRC(85)
    Applications
    Applications
    • Face MillingFace Milling (84)
    • PocketPocket (84)
    • Pocket HelicalPocket Helical (84)
    • Pocket MillingPocket Milling (84)
    • Pocket Plunge MillingPocket Plunge Milling (11)
    • Profile MillingProfile Milling (84)
    • RampingRamping (84)
    • Shoulder Ball NoseShoulder Ball Nose (72)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (1)
    • Shoulder MillingShoulder Milling (84)
    • Shoulder RoughingShoulder Roughing (12)
    • Slot MillingSlot Milling (67)
    Cutting Diameter
    Cutting Diameter
    • 0.75 in(3)
    • 0.778 in(3)
    • 0.787 in(3)
    • 0.87 in(3)
    • 0.906 in(1)
    • 0.946 in(2)
    • 1.0 in(3)
    • 1.028 in(3)
    • 1.102 in(2)
    • 1.181 in(1)
    • 1.25 in(2)
    • 1.339 in(1)
    • 1.37 in(2)
    • 1.417 in(1)
    • 1.496 in(2)
    • 1.5 in(1)
    • 1.528 in(1)
    • 1.575 in(1)
    • 1.697 in(1)
    • 1.75 in(1)
    • 1.85 in(2)
    • 1.87 in(1)
    • 2.0 in(2)
    • 2.008 in(2)
    • 2.028 in(1)
    • 2.126 in(1)
    • 2.25 in(1)
    • 2.366 in(1)
    • 2.37 in(2)
    • 2.5 in(2)
    • 2.52 in(2)
    • 2.528 in(2)
    • 2.677 in(2)
    • 3.0 in(1)
    • 3.154 in(1)
    • 3.25 in(2)
    • 3.307 in(2)
    • 3.37 in(1)
    • 3.465 in(2)
    • 3.528 in(2)
    • 4.0 in(1)
    • 4.138 in(1)
    • 4.25 in(2)
    • 4.291 in(1)
    • 5.0 in(1)
    • 5.25 in(2)
    • 5.37 in(1)
    • 5.516 in(2)
    • 7.0 in(1)
    • 7.008 in(1)
    • 7.09 in(1)
    • 7.25 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 19.05 mm(3)
    • 19.75 mm(3)
    • 20.0 mm(3)
    • 22.1 mm(3)
    • 23.0 mm(1)
    • 24.0 mm(2)
    • 25.401 mm(3)
    • 26.1 mm(3)
    • 28.0 mm(2)
    • 30.0 mm(1)
    • 31.75 mm(2)
    • 34.0 mm(1)
    • 34.801 mm(2)
    • 36.0 mm(1)
    • 38.0 mm(2)
    • 38.1 mm(1)
    • 38.801 mm(1)
    • 40.0 mm(1)
    • 43.1 mm(1)
    • 44.45 mm(1)
    • 47.0 mm(2)
    • 47.5 mm(1)
    • 50.801 mm(2)
    • 51.0 mm(2)
    • 51.5 mm(1)
    • 54.0 mm(1)
    • 57.151 mm(1)
    • 60.1 mm(1)
    • 60.2 mm(2)
    • 63.5 mm(2)
    • 64.0 mm(2)
    • 64.2 mm(2)
    • 68.0 mm(2)
    • 76.2 mm(1)
    • 80.101 mm(1)
    • 82.551 mm(2)
    • 84.0 mm(2)
    • 85.601 mm(1)
    • 88.0 mm(2)
    • 89.601 mm(2)
    • 101.601 mm(1)
    • 105.101 mm(1)
    • 107.95 mm(2)
    • 109.0 mm(1)
    • 127.0 mm(1)
    • 133.35 mm(2)
    • 136.4 mm(1)
    • 140.1 mm(2)
    • 177.8 mm(1)
    • 178.0 mm(1)
    • 180.076 mm(1)
    • 184.15 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 31.75 mm(4)
    • 31.8 mm(2)
    • 32.0 mm(3)
    • 35.0 mm(1)
    • 38.1 mm(9)
    • 40.0 mm(4)
    • 42.0 mm(1)
    • 50.0 mm(3)
    • 50.801 mm(6)
    • 52.0 mm(2)
    • 63.0 mm(5)
    • 63.5 mm(4)
    • 66.0 mm(1)
    • 76.2 mm(8)
    • 80.0 mm(5)
    • 100.0 mm(5)
    • 101.601 mm(6)
    • 125.0 mm(2)
    • 127.0 mm(3)
    • 152.4 mm(4)
    • 160.0 mm(2)
    • 200.0 mm(1)
    • 203.201 mm(3)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.25 in(4)
    • 1.252 in(2)
    • 1.26 in(3)
    • 1.379 in(1)
    • 1.5 in(9)
    • 1.575 in(4)
    • 1.655 in(1)
    • 1.969 in(3)
    • 2.0 in(6)
    • 2.047 in(2)
    • 2.48 in(5)
    • 2.5 in(4)
    • 2.598 in(1)
    • 3.0 in(8)
    • 3.15 in(5)
    • 3.938 in(5)
    • 4.0 in(6)
    • 4.921 in(2)
    • 5.0 in(3)
    • 6.0 in(4)
    • 6.299 in(2)
    • 7.875 in(1)
    • 8.0 in(3)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.0 mm(29)
    • 6.351 mm(10)
    • 8.0 mm(21)
    • 9.525 mm(11)
    • 10.0 mm(7)
    • 12.701 mm(6)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.237 in(29)
    • 0.25 in(10)
    • 0.315 in(21)
    • 0.375 in(11)
    • 0.394 in(7)
    • 0.5 in(6)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.5 in(10)
    • 1.575 in(10)
    • 1.772 in(3)
    • 1.969 in(23)
    • 2.0 in(21)
    • 2.48 in(6)
    • 2.5 in(11)
    Reach MintoReach Max
    Reach
    Reach
    • 38.1 mm(10)
    • 40.0 mm(10)
    • 45.0 mm(3)
    • 50.0 mm(23)
    • 50.801 mm(21)
    • 63.0 mm(6)
    • 63.5 mm(11)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (84)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (50)
    • B-Cutter Retention Screw (5)
    • C-Bolt Circle (4)
    • SHCS or RetScrw Or BoltCircle (2)
    • Screw-On Connection (8)
    • Straight-Cylindrical (10)
    • Weldon (5)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 2 (3)
    • 3 (16)
    • 4 (16)
    • 5 (13)
    • 6 (11)
    • 7 (10)
    • 8 (9)
    • 9 (5)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(5)
    • 1.969 in(22)
    • 2.0 in(17)
    • 2.465 in(5)
    • 2.48 in(6)
    • 2.5 in(11)
    • 2.736 in(3)
    • 3.976 in(1)
    • 4.28 in(3)
    • 4.69 in(1)
    • 6.0 in(2)
    • 7.0 in(1)
    • 7.48 in(1)
    • 7.875 in(2)
    • 8.0 in(2)
    • 10.0 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(5)
    • 50.0 mm(22)
    • 50.801 mm(17)
    • 62.6 mm(5)
    • 63.0 mm(6)
    • 63.5 mm(11)
    • 69.5 mm(3)
    • 101.0 mm(1)
    • 108.7 mm(3)
    • 119.125 mm(1)
    • 152.4 mm(2)
    • 177.8 mm(1)
    • 190.0 mm(1)
    • 200.0 mm(2)
    • 203.201 mm(2)
    • 254.0 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.237 in(46)
    • 0.25 in(15)
    • 0.315 in(31)
    • 0.375 in(22)
    • 0.394 in(17)
    • 0.5 in(16)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 6.0 mm(46)
    • 6.351 mm(15)
    • 8.0 mm(31)
    • 9.525 mm(22)
    • 10.0 mm(17)
    • 12.701 mm(16)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC422M (61)
    • KC522M (89)
    • KC715M (17)
    • KC725M (104)
    • KCMP30 (30)
    • KCPK30 (97)
    • KCPM20 (51)
    • KCPM40 (82)
    • KCSM30 (89)
    • KCSM40 (54)
    Hand Of Tool
    Hand Of Tool
    • R (84)
    Wiper Insert
    Wiper Insert
    • N (63)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.41 (1)
    • 0.49 (1)
    • 0.5 (1)
    • 0.56 (2)
    • 0.59 (2)
    • 0.63 (1)
    • 0.64 (1)
    • 0.67 (2)
    • 0.68 (1)
    • 0.69 (1)
    • 0.7 (1)
    • 0.73 (2)
    • 0.75 (1)
    • 0.78 (1)
    • 0.79 (1)
    • 0.8 (2)
    • 0.83 (1)
    • 0.89 (2)
    • 2.6 (1)
    • 3.0 (1)
    • 3.06 (1)
    • 3.3 (1)
    • 3.4 (1)
    • 3.5 (1)
    • 4.0 (1)
    • 4.1 (2)
    • 4.3 (2)
    • 4.5 (1)
    • 4.6 (1)
    • 4.7 (1)
    • 4.74 (3)
    • 5.1 (1)
    • 5.3 (2)
    • 5.7 (4)
    • 5.95 (1)
    • 6.0 (3)
    • 6.1 (1)
    • 6.35 (2)
    • 6.6 (1)
    • 6.8 (1)
    • 7.0 (1)
    • 7.7 (2)
    • 7.87 (1)
    • 8.16 (1)
    • 8.2 (1)
    • 8.383 (1)
    • 8.8 (1)
    • 8.97 (2)
    • 9.2 (2)
    • 9.25 (1)
    • 9.7 (1)
    • 9.8 (1)
    • 9.867 (1)
    • 9.9 (1)
    • 9.983 (1)
    • 10.2 (1)
    • 10.68 (1)
    • 10.8 (1)
    • 11.08 (1)
    • 11.1 (1)
    • 11.43 (1)
    • 11.7 (1)
    • 11.73 (1)
    • 11.8 (1)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    Front-End
    Neck Diameter
    Neck Diameter
    • 1.24 in(1)
    • 1.625 in(2)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 31.5 mm(1)
    • 41.276 mm(2)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • R-ROUND (63)
    Insert IC Size
    Insert IC Size
    • 12.0 mm(17)
    • 12.701 mm(5)
    • 16.0 mm(10)
    • 19.05 mm(11)
    • 20.0 mm(10)
    • 25.401 mm(10)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.473 in(17)
    • 0.5 in(5)
    • 0.63 in(10)
    • 0.75 in(11)
    • 0.787 in(10)
    • 1.0 in(10)
    Insert IC Size MintoInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GDX (3)
    • GE (14)
    • GF (10)
    • GP (4)
    • HF (12)
    • HP (3)
    • LE (8)
    • LF (9)
    Cutting Tool Material
    Cutting Tool Material
    • H W (63)
    Tolerance Class
    Tolerance Class
    • E (18)
    • G (31)
    • P (14)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (15)
    • SCREW-ON (8)
    • SHELL MILL (61)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(5)
    • 19.1 mm(2)
    • 22.0 mm(10)
    • 25.401 mm(9)
    • 27.0 mm(6)
    • 29.0 mm(8)
    • 31.75 mm(16)
    • 32.0 mm(9)
    • 38.1 mm(8)
    • 40.0 mm(4)
    • 60.0 mm(1)
    • 63.5 mm(3)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.63 in(2)
    • 0.75 in(5)
    • 0.752 in(2)
    • 0.866 in(10)
    • 1.0 in(9)
    • 1.063 in(6)
    • 1.143 in(8)
    • 1.25 in(16)
    • 1.26 in(9)
    • 1.5 in(8)
    • 1.575 in(4)
    • 2.362 in(1)
    • 2.5 in(3)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?