KenFeed™ Mini

The KenFeed™ Mini platform is the perfect system for roughing up to 55 HRC in milling operations. The high-feed series of mini-end mills and inserts are suited for pocketing, ramping, and helical interpolations. The strong design capacity supports higher cutting forces and unstable situations. Insert and body design provide superior milling capabilities when machining small components. Screw-On cutters feature internal coolant for better chip evacuation and higher tool life. The KenFeed Mini delivers higher productivity with reduced tooling costs.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (22)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(20)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(21)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(21)
    • M Stainless Steel (21)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(21)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(21)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(21)
    • K Cast Iron (21)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(20)
    • N Non-Ferrous Materials (18)
      • N1
        Wrought Aluminum (18)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(18)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(18)
    • S High-Temp Alloys (20)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(20)
    • H Hardened Materials (19)
      • H1
        Hardened Materials 44-48 HRC(19)
    Applications
    Applications
    • Face MillingFace Milling (17)
    • PocketPocket (17)
    • Pocket HelicalPocket Helical (17)
    • Pocket MillingPocket Milling (17)
    • Pocket Plunge MillingPocket Plunge Milling (17)
    • Profile MillingProfile Milling (17)
    • RampingRamping (17)
    • Shoulder MillingShoulder Milling (17)
    • Shoulder RoughingShoulder Roughing (17)
    • Slot MillingSlot Milling (17)
    Cutting Diameter
    Cutting Diameter
    • 0.329 in(1)
    • 0.393 in(1)
    • 0.394 in(1)
    • 0.398 in(1)
    • 0.415 in(1)
    • 0.461 in(1)
    • 0.485 in(1)
    • 0.492 in(2)
    • 0.512 in(1)
    • 0.561 in(1)
    • 0.642 in(1)
    • 0.694 in(1)
    • 0.702 in(1)
    • 0.74 in(2)
    • 0.882 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 8.35 mm(1)
    • 9.976 mm(1)
    • 10.0 mm(1)
    • 10.101 mm(1)
    • 10.525 mm(1)
    • 11.701 mm(1)
    • 12.326 mm(1)
    • 12.5 mm(2)
    • 13.0 mm(1)
    • 14.25 mm(1)
    • 16.3 mm(1)
    • 17.6 mm(1)
    • 17.8 mm(1)
    • 18.8 mm(2)
    • 22.401 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 15.875 mm(2)
    • 16.0 mm(3)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(3)
    • 25.401 mm(2)
    • 32.0 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.625 in(2)
    • 0.63 in(3)
    • 0.75 in(3)
    • 0.787 in(3)
    • 0.984 in(3)
    • 1.0 in(2)
    • 1.26 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.851 mm(5)
    • 1.026 mm(12)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.034 in(5)
    • 0.04 in(12)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 0.984 in(1)
    • 1.0 in(2)
    • 1.181 in(2)
    • 1.379 in(1)
    • 1.391 in(1)
    • 1.393 in(1)
    • 1.693 in(1)
    • 1.969 in(1)
    • 2.178 in(1)
    • 2.237 in(1)
    • 2.242 in(2)
    • 2.261 in(1)
    • 2.358 in(1)
    • 2.394 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 25.0 mm(1)
    • 25.401 mm(2)
    • 30.0 mm(2)
    • 35.0 mm(1)
    • 35.325 mm(1)
    • 35.35 mm(1)
    • 43.0 mm(1)
    • 50.0 mm(1)
    • 55.325 mm(1)
    • 56.825 mm(1)
    • 56.95 mm(2)
    • 57.401 mm(1)
    • 59.901 mm(1)
    • 60.801 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 12.0 (6)
    • 78.0 (7)
    • 90.0 (4)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Screw-On Connection (6)
    • Straight-Cylindrical (11)
    Number of Flutes
    Number of Flutes
    • 2 (5)
    • 3 (6)
    • 4 (5)
    • 5 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.681 in(1)
    • 1.697 in(1)
    • 1.969 in(2)
    • 2.244 in(1)
    • 2.657 in(1)
    • 3.362 in(1)
    • 4.331 in(2)
    • 4.5 in(1)
    • 4.724 in(1)
    • 4.8 in(1)
    • 5.906 in(1)
    • 6.0 in(2)
    • 6.694 in(1)
    • 7.875 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 42.7 mm(1)
    • 43.1 mm(1)
    • 50.0 mm(2)
    • 57.0 mm(1)
    • 67.5 mm(1)
    • 85.4 mm(1)
    • 110.0 mm(2)
    • 114.301 mm(1)
    • 120.0 mm(1)
    • 121.926 mm(1)
    • 150.0 mm(1)
    • 152.4 mm(2)
    • 170.0 mm(1)
    • 200.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.016 in(22)
    • 0.492 in(1)
    • 0.63 in(2)
    • 0.984 in(2)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(22)
    • 12.5 mm(1)
    • 16.0 mm(2)
    • 25.0 mm(2)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K110M (18)
    • K125M (17)
    • KC510M (18)
    • KC522M (18)
    • KC725M (18)
    • KC930M (17)
    • KCKP10 (18)
    • KCPK30 (22)
    • KCPM20 (17)
    • PVA (17)
    Hand Of Tool
    Hand Of Tool
    • R (17)
    Wiper Insert
    Wiper Insert
    • N (10)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 2.0 (1)
    • 3.0 (1)
    • 3.3 (3)
    • 4.5 (1)
    • 4.7 (1)
    • 5.3 (4)
    • 7.0 (3)
    • 7.4 (1)
    • 8.5 (2)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    Front-End
    Neck Diameter
    Neck Diameter
    • 0.539 in(1)
    • 0.683 in(1)
    • 0.728 in(2)
    • 0.902 in(2)
    • 0.921 in(1)
    • 0.933 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 13.701 mm(1)
    • 17.35 mm(1)
    • 18.5 mm(2)
    • 22.901 mm(2)
    • 23.401 mm(1)
    • 23.701 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • W-TRIGON 80 (10)
    Insert IC Size
    Insert IC Size
    • 5.5 mm(5)
    • 8.5 mm(1)
    • 11.175 mm(2)
    • 12.701 mm(2)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.217 in(5)
    • 0.335 in(1)
    • 0.44 in(2)
    • 0.5 in(2)
    Insert IC Size MintoInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (3)
    • GN (2)
    • LD (3)
    • LN (2)
    Cutting Tool Material
    Cutting Tool Material
    • H W (10)
    Tolerance Class
    Tolerance Class
    • G (10)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (11)
    • SCREW-ON (6)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(2)
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 17.75 mm(1)
    • 18.0 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(1)
    • 21.0 mm(1)
    • 25.0 mm(3)
    • 25.401 mm(2)
    • 29.0 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.512 in(2)
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.7 in(1)
    • 0.709 in(1)
    • 0.75 in(2)
    • 0.787 in(1)
    • 0.828 in(1)
    • 0.984 in(3)
    • 1.0 in(2)
    • 1.143 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?