3/8 iC

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (17)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(17)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(17)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(17)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(17)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(17)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(17)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(17)
    • M Stainless Steel (17)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(17)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(17)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(17)
    • K Cast Iron (17)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(17)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(17)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(17)
    • S High-Temp Alloys (12)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
    • H Hardened Materials (11)
      • H1
        Hardened Materials 44-48 HRC(11)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (11)
    • Pipe ThreadPipe Thread (6)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (6)
    • Shoulder RoughingShoulder Roughing (6)
    • Shoulder Square EndShoulder Square End (6)
    • Thread MillingThread Milling (6)
    • ThreadingThreading (6)
    Cutting Diameter
    Cutting Diameter
    • 1.417 in(1)
    • 1.437 in(1)
    • 1.655 in(2)
    • 1.891 in(1)
    • 2.205 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 36.0 mm(1)
    • 36.5 mm(1)
    • 42.0 mm(2)
    • 48.0 mm(1)
    • 56.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Reach
    Reach
    • 1.567 in(1)
    • 1.575 in(2)
    • 4.055 in(1)
    • 5.039 in(1)
    • 5.984 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 39.801 mm(1)
    • 40.0 mm(2)
    • 103.0 mm(1)
    • 128.0 mm(1)
    • 152.0 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (6)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (3)
    • Straight-Cylindrical (1)
    • Weldon (2)
    Number of Flutes
    Number of Flutes
    • 3 (2)
    • 4 (2)
    • 5 (1)
    • 6 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.567 in(1)
    • 1.575 in(2)
    • 6.535 in(1)
    • 7.913 in(1)
    • 8.74 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.801 mm(1)
    • 40.0 mm(2)
    • 166.0 mm(1)
    • 201.0 mm(1)
    • 222.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.002 in(8)
    • 0.003 in(7)
    • 0.006 in(8)
    • 0.01 in(10)
    • 0.011 in(8)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(8)
    • 0.076 mm(7)
    • 0.151 mm(8)
    • 0.25 mm(10)
    • 0.275 mm(8)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (12)
    • KC635M (11)
    Hand Of Tool
    Hand Of Tool
    • R (6)
    Countersunk Angle
    Countersunk Angle
    • 27.5 (5)
    • 30.0 (6)
    Countersunk Angle MintoCountersunk Angle Max
    Front-End
    Thread TPI
    Thread TPI
    • 6.0 (10)
    • 10.0 (8)
    • 11.0 (8)
    • 16.0 (9)
    Thread TPI MintoThread TPI Max
    Thread Pitch
    Thread Pitch
    • 2.0 mm(8)
    • 3.5 mm(8)
    • 6.0 mm(8)
    Thread Pitch MintoThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.079 in(8)
    • 0.138 in(8)
    • 0.237 in(8)
    Thread Pitch MintoThread Pitch Max
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (11)
    Insert IC Size
    Insert IC Size
    • 9.525 mm(11)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.375 in(11)
    Insert IC Size MintoInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 16 (11)
    Cutting Edge Length
    Cutting Edge Length
    • 16.0 mm(11)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.63 in(11)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (11)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (3)
    • SHELL MILL (3)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 22.0 mm(2)
    • 28.0 mm(1)
    • 32.0 mm(1)
    • 40.0 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.866 in(2)
    • 1.102 in(1)
    • 1.26 in(1)
    • 1.575 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?