Accessories
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (22)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
- M Stainless Steel (22)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
- K Cast Iron (22)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(22)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(22)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(22)
- N Non-Ferrous Materials (22)
- N1Wrought Aluminum (22)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(22)
- N3High-Silicon Aluminum Alloys Si >12.2%(22)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (22)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (22)
- N6Carbon, Graphite Composites, CFRP (22)
- N7MMC's (22)
- S High-Temp Alloys (22)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(22)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(22)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(22)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
- H Hardened Materials (22)
- H1Hardened Materials 44-48 HRC(22)
- H2Hardened Materials 48-55 HRC(22)
- H3Hardened Materials 56-60 HRC(22)
- H4Hardened Materials >60 HRC(22)
- C CFRP Materials (22)
- C1CFRP, CFRP / CFRP (22)
- C2CFRP / Aluminium CFRP / Non-Ferrous (22)
Applications
Applications
- Blind Hole Finishing (15)
- Through Hole Finishing (15)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (19)
- Lightly Interrupted Cut (19)
- Smooth Cut (19)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (19)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.754 in(3)
- 0.931 in(3)
- 0.971 in(3)
- 1.209 in(3)
- 1.524 in(3)
to
Over All Length [L]
Over All Length [L]
- 19.151 mm(3)
- 23.651 mm(3)
- 24.651 mm(3)
- 30.701 mm(3)
- 38.7 mm(3)
to
Corner Radius
Corner Radius
- 0.004 in(22)
- 0.008 in(22)
- 0.016 in(22)
- 0.031 in(22)
to
Corner Radius
Corner Radius
- 0.1 mm(22)
- 0.2 mm(22)
- 0.4 mm(22)
- 0.8 mm(22)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(19)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(19)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (22)
- K68 (22)
- KB1610 (22)
- KB5610 (22)
- KBH20 (22)
- KC250 (22)
- KC5010 (22)
- KC5025 (22)
- KC5410 (22)
- KC710 (22)
- KC720 (22)
- KC730 (22)
- KC7310 (22)
- KC732 (22)
- KC8050 (22)
- KC810 (22)
- KC850 (22)
- KC9010 (22)
- KC9025 (22)
- KC910 (22)
- KC9105 (22)
- KC9110 (22)
- KC9120 (22)
- KC9125 (22)
- KC9225 (22)
- KC9240 (22)
- KC9240NEW (22)
- KC9315 (22)
- KC9320 (22)
- KC9325 (22)
- KC935 (22)
- KC950 (22)
- KC990 (22)
- KCD25 (22)
- KCK05 (22)
- KCK15 (22)
- KCK15B (22)
- KCK20 (22)
- KCK20B (22)
- KCM15 (22)
- KCM15B (22)
- KCM25 (22)
- KCM25B (22)
- KCP05 (22)
- KCP10 (22)
- KCP10B (22)
- KCP25 (22)
- KCP25B (22)
- KCP25C (22)
- KCP30 (22)
- KCPK05 (22)
- KCS10 (22)
- KCS10B (22)
- KCU10 (22)
- KCU10B (22)
- KCU25 (22)
- KCU25B (22)
- KD050 (22)
- KD100 (22)
- KD105 (22)
- KD120 (22)
- KD1400 (22)
- KD1405 (22)
- KD1425 (22)
- KT125 (22)
- KT150 (22)
- KT175 (22)
- KT315 (22)
- KTP10 (22)
- KU10 (22)
- KU10T (22)
- KU30T (22)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 25.0 mm(1)
- 25.5 mm(1)
- 29.5 mm(1)
- 33.5 mm(1)
- 42.0 mm(1)
- 43.0 mm(1)
- 45.5 mm(1)
- 49.0 mm(1)
- 52.0 mm(1)
- 56.5 mm(1)
- 61.0 mm(1)
- 65.0 mm(1)
- 97.0 mm(1)
- 103.5 mm(1)
- 110.0 mm(1)
- 138.0 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.984 in(1)
- 1.004 in(1)
- 1.161 in(1)
- 1.319 in(1)
- 1.655 in(1)
- 1.693 in(1)
- 1.792 in(1)
- 1.929 in(1)
- 2.047 in(1)
- 2.224 in(1)
- 2.402 in(1)
- 2.559 in(1)
- 3.819 in(1)
- 4.075 in(1)
- 4.331 in(1)
- 5.433 in(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 1.319 in(1)
- 1.713 in(1)
- 2.559 in(1)
- 3.938 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 33.5 mm(1)
- 43.5 mm(1)
- 65.0 mm(1)
- 100.0 mm(1)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (19)
Cartridge Size
Cartridge Size
- 1A. (1)
- 1B. (1)
- 1C. (1)
- 1D. (1)
- 1L. (1)
- 2A. (1)
- 2B. (1)
- 2C. (1)
- 2D. (1)
- 2L. (1)
- 3A. (1)
- 3B. (1)
- 3C. (1)
- 3D. (1)
- 3L. (1)
Gage Length
Gage Length
- 0.492 in(1)
- 0.886 in(1)
- 1.181 in(1)
- 1.28 in(1)
- 1.571 in(2)
- 1.575 in(3)
- 1.581 in(1)
- 1.614 in(2)
- 1.673 in(1)
- 1.827 in(1)
- 1.969 in(6)
- 2.035 in(1)
- 2.358 in(1)
- 2.362 in(5)
- 2.368 in(1)
- 2.753 in(1)
- 2.757 in(1)
- 2.953 in(2)
- 3.15 in(1)
- 3.346 in(1)
- 3.543 in(1)
- 3.938 in(6)
Gage Length
Gage Length
- 100 mm(6)
- 50 mm(6)
- 60 mm(5)
- 40 mm(3)
- 41 mm(2)
- 75 mm(2)
- 30 mm(1)
- 70 mm(1)
- 80 mm(1)
- 85 mm(1)
- 90 mm(1)
- 12.5 mm(1)
- 22.5 mm(1)
- 32.5 mm(1)
- 39.901 mm(2)
- 40.151 mm(1)
- 42.5 mm(1)
- 46.401 mm(1)
- 51.7 mm(1)
- 59.901 mm(1)
- 60.151 mm(1)
- 69.9 mm(1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (19)
- B L (19)
- D P (19)
- H T (19)
- H W (19)
Back-End
System Size
System Size
- BT40 (2)
- BT50 (4)
- CV40 (2)
- CV50 (4)
- DV40 (2)
- DV50 (4)
- HSK100A (4)
- HSK63A (2)
- KM63XMZ (1)
- KR32 (4)
- KR50 (2)
- KR63 (2)
- KR80 (2)
Back-End Diameter
Back-End Diameter
- 16.0 mm(3)
- 25.401 mm(1)
- 31.75 mm(2)
- 44.45 mm(6)
- 63.0 mm(3)
- 69.851 mm(12)
- 100.0 mm(4)
to
Back-End Diameter
Back-End Diameter
- 0.63 in(3)
- 1.0 in(1)
- 1.25 in(2)
- 1.75 in(6)
- 2.48 in(3)
- 2.75 in(12)
- 3.938 in(4)
to
No filters matching ""