KSEM PLUS™ Modular Drill for Large Diameter Drilling

The KSEM PLUS modular drill covers drilling applications in a diameter range from 28mm to 101,6mm (1.102-4”) up to 10 x D. KSEM PLUS combines the advantages of a modular drill and an indexable drill, providing high speed and feed capability with large length-to-diameter ratio at low consumable cost. This modular system is a versatile solution that allows quick tool set-up and helps to keep tool inventory at a minimum.

Interchangeable head styles with two fully effective cutting edges deliver excellent productivity in all cutting conditions and many materials:

  • The KSEM PLUS A1 head for lowest cost per hole.
  • The KSEM PLUS B1 head for challenging conditions like stacked plates, cross holes, and inclined exits. 

Browse KSEM PLUS Products

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (290)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(290)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(290)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(290)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(290)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(290)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(281)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(281)
    • M Stainless Steel (289)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(289)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(289)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(275)
    • K Cast Iron (271)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(271)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(271)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(271)
    • N Non-Ferrous Materials (266)
      • N1
        Wrought Aluminum (265)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(265)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(265)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (251)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (260)
      • N6
        Carbon, Graphite Composites, CFRP (251)
      • N7
        MMC's (247)
    • S High-Temp Alloys (275)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(275)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(275)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(275)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(275)
    • H Hardened Materials (102)
      • H1
        Hardened Materials 44-48 HRC(102)
    Select First Choice
    • BR (4)
    • CN (194)
    • DE (185)
    • GB (88)
    • IN (26)
    • SG (66)
    • US (164)
    Applications
    Applications
    • DrillingDrilling (183)
    • Stacked Plates DrillingStacked Plates Drilling (97)
    Cutting Diameter
    Cutting Diameter
    • 0.512 in(1)
    • 0.551 in(1)
    • 0.591 in(1)
    • 0.63 in(1)
    • 0.669 in(1)
    • 0.709 in(1)
    • 0.748 in(1)
    • 0.787 in(1)
    • 0.828 in(1)
    • 0.866 in(1)
    • 0.906 in(1)
    • 0.946 in(1)
    • 0.984 in(1)
    • 1.024 in(1)
    • 1.063 in(1)
    • 1.102 in(3)
    • 1.125 in(2)
    • 1.143 in(3)
    • 1.156 in(2)
    • 1.181 in(3)
    • 1.188 in(2)
    • 1.22 in(3)
    • 1.25 in(2)
    • 1.26 in(3)
    • 1.299 in(3)
    • 1.307 in(2)
    • 1.313 in(2)
    • 1.339 in(3)
    • 1.375 in(2)
    • 1.379 in(3)
    • 1.417 in(3)
    • 1.438 in(2)
    • 1.457 in(3)
    • 1.476 in(2)
    • 1.496 in(3)
    • 1.5 in(2)
    • 1.536 in(3)
    • 1.543 in(2)
    • 1.563 in(2)
    • 1.575 in(3)
    • 1.614 in(2)
    • 1.625 in(2)
    • 1.655 in(2)
    • 1.693 in(2)
    • 1.732 in(2)
    • 1.75 in(2)
    • 1.772 in(2)
    • 1.811 in(2)
    • 1.85 in(2)
    • 1.875 in(2)
    • 1.891 in(2)
    • 1.929 in(2)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.008 in(2)
    • 2.047 in(2)
    • 2.087 in(2)
    • 2.125 in(2)
    • 2.126 in(2)
    • 2.165 in(2)
    • 2.205 in(2)
    • 2.244 in(2)
    • 2.25 in(2)
    • 2.283 in(2)
    • 2.323 in(2)
    • 2.362 in(2)
    • 2.375 in(2)
    • 2.402 in(2)
    • 2.441 in(2)
    • 2.48 in(2)
    • 2.5 in(2)
    • 2.52 in(2)
    • 2.559 in(2)
    • 2.598 in(2)
    • 2.625 in(2)
    • 2.638 in(2)
    • 2.677 in(2)
    • 2.717 in(2)
    • 2.75 in(2)
    • 2.757 in(2)
    • 2.795 in(2)
    • 2.835 in(2)
    • 2.874 in(2)
    • 2.875 in(2)
    • 2.914 in(2)
    • 2.953 in(2)
    • 2.992 in(2)
    • 3.0 in(2)
    • 3.071 in(2)
    • 3.125 in(2)
    • 3.15 in(2)
    • 3.189 in(1)
    • 3.228 in(1)
    • 3.25 in(2)
    • 3.307 in(2)
    • 3.346 in(1)
    • 3.375 in(1)
    • 3.386 in(2)
    • 3.426 in(1)
    • 3.465 in(1)
    • 3.5 in(2)
    • 3.504 in(1)
    • 3.543 in(1)
    • 3.622 in(2)
    • 3.625 in(1)
    • 3.74 in(2)
    • 3.75 in(2)
    • 3.781 in(2)
    • 3.858 in(1)
    • 3.898 in(1)
    • 3.938 in(2)
    • 4.0 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 13.0 mm(1)
    • 14.0 mm(1)
    • 15.0 mm(1)
    • 16.0 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 20.0 mm(1)
    • 21.0 mm(1)
    • 22.0 mm(1)
    • 23.0 mm(1)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 26.0 mm(1)
    • 27.0 mm(1)
    • 28.0 mm(3)
    • 28.576 mm(2)
    • 29.0 mm(3)
    • 29.35 mm(2)
    • 30.0 mm(3)
    • 30.175 mm(2)
    • 31.0 mm(3)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 33.0 mm(3)
    • 33.2 mm(2)
    • 33.35 mm(2)
    • 34.0 mm(3)
    • 34.926 mm(2)
    • 35.0 mm(3)
    • 36.0 mm(3)
    • 36.525 mm(2)
    • 37.0 mm(3)
    • 37.5 mm(2)
    • 38.0 mm(3)
    • 38.1 mm(2)
    • 39.0 mm(3)
    • 39.2 mm(2)
    • 39.7 mm(2)
    • 40.0 mm(3)
    • 41.0 mm(2)
    • 41.276 mm(2)
    • 42.0 mm(2)
    • 43.0 mm(2)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 45.0 mm(2)
    • 46.0 mm(2)
    • 47.0 mm(2)
    • 47.625 mm(2)
    • 48.0 mm(2)
    • 49.0 mm(2)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 51.0 mm(2)
    • 52.0 mm(2)
    • 53.0 mm(2)
    • 53.975 mm(2)
    • 54.0 mm(2)
    • 55.0 mm(2)
    • 56.0 mm(2)
    • 57.0 mm(2)
    • 57.151 mm(2)
    • 58.0 mm(2)
    • 59.0 mm(2)
    • 60.0 mm(2)
    • 60.325 mm(2)
    • 61.0 mm(2)
    • 62.0 mm(2)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 64.0 mm(2)
    • 65.0 mm(2)
    • 66.0 mm(2)
    • 66.675 mm(2)
    • 67.0 mm(2)
    • 68.0 mm(2)
    • 69.0 mm(2)
    • 69.851 mm(2)
    • 70.0 mm(2)
    • 71.0 mm(2)
    • 72.0 mm(2)
    • 73.0 mm(2)
    • 73.025 mm(2)
    • 74.0 mm(2)
    • 75.0 mm(2)
    • 76.0 mm(2)
    • 76.2 mm(2)
    • 78.0 mm(2)
    • 79.375 mm(2)
    • 80.0 mm(2)
    • 81.0 mm(1)
    • 82.0 mm(1)
    • 82.551 mm(2)
    • 84.0 mm(2)
    • 85.0 mm(1)
    • 85.726 mm(1)
    • 86.0 mm(2)
    • 87.0 mm(1)
    • 88.0 mm(1)
    • 88.9 mm(2)
    • 89.0 mm(1)
    • 90.0 mm(1)
    • 92.0 mm(2)
    • 92.075 mm(1)
    • 95.0 mm(2)
    • 95.25 mm(2)
    • 96.0 mm(2)
    • 98.0 mm(1)
    • 99.0 mm(1)
    • 100.0 mm(2)
    • 101.601 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Interrupted (74)
    • Stable (79)
    • Unstable (74)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 20.0 mm(17)
    • 22.0 mm(7)
    • 25.0 mm(37)
    • 30.0 mm(30)
    • 35.0 mm(17)
    • 36.0 mm(11)
    • 40.0 mm(19)
    • 45.0 mm(11)
    • 50.0 mm(8)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.787 in(17)
    • 0.866 in(7)
    • 0.984 in(37)
    • 1.181 in(30)
    • 1.379 in(17)
    • 1.417 in(11)
    • 1.575 in(19)
    • 1.772 in(11)
    • 1.969 in(8)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.787 in(17)
    • 0.866 in(7)
    • 0.917 in(9)
    • 0.935 in(8)
    • 0.944 in(7)
    • 0.984 in(13)
    • 1.101 in(6)
    • 1.114 in(7)
    • 1.181 in(17)
    • 1.272 in(9)
    • 1.298 in(8)
    • 1.417 in(11)
    • 1.469 in(11)
    • 1.491 in(9)
    • 1.518 in(9)
    • 1.666 in(13)
    • 1.703 in(6)
    • 1.863 in(3)
    • 1.885 in(7)
    • 1.901 in(1)
    • 1.911 in(5)
    Reach MintoReach Max
    Reach
    Reach
    • 20.0 mm(17)
    • 22.0 mm(7)
    • 23.3 mm(9)
    • 23.75 mm(8)
    • 23.951 mm(7)
    • 25.0 mm(13)
    • 27.975 mm(6)
    • 28.3 mm(7)
    • 30.0 mm(17)
    • 32.301 mm(9)
    • 32.975 mm(8)
    • 36.0 mm(11)
    • 37.301 mm(11)
    • 37.875 mm(9)
    • 38.526 mm(9)
    • 42.325 mm(13)
    • 43.25 mm(6)
    • 47.325 mm(3)
    • 47.875 mm(7)
    • 48.25 mm(1)
    • 48.526 mm(5)
    Reach MintoReach Max
    Connection Style
    Connection Style
    • FDS Connection (183)
    Number of Flutes
    Number of Flutes
    • 2 (183)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (211)
    • 2.0 (138)
    • 3.0 (124)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.397 in(2)
    • 1.403 in(2)
    • 1.409 in(3)
    • 1.413 in(2)
    • 1.416 in(2)
    • 1.421 in(2)
    • 1.429 in(2)
    • 1.445 in(1)
    • 1.451 in(2)
    • 1.459 in(3)
    • 1.465 in(2)
    • 1.472 in(1)
    • 1.534 in(1)
    • 1.541 in(2)
    • 1.547 in(2)
    • 1.555 in(2)
    • 1.6 in(2)
    • 1.606 in(2)
    • 1.614 in(2)
    • 1.621 in(2)
    • 1.651 in(1)
    • 1.657 in(2)
    • 1.663 in(3)
    • 1.669 in(2)
    • 1.677 in(1)
    • 1.736 in(1)
    • 1.743 in(2)
    • 1.75 in(1)
    • 1.758 in(1)
    • 1.764 in(1)
    • 1.772 in(1)
    • 1.818 in(1)
    • 1.825 in(1)
    • 1.832 in(1)
    • 1.839 in(2)
    • 1.845 in(1)
    • 1.941 in(1)
    • 1.948 in(2)
    • 1.955 in(1)
    • 1.962 in(1)
    • 1.969 in(1)
    • 1.975 in(1)
    • 2.023 in(1)
    • 2.031 in(1)
    • 2.036 in(1)
    • 2.043 in(2)
    • 2.05 in(1)
    • 2.136 in(1)
    • 2.144 in(2)
    • 2.15 in(1)
    • 2.157 in(1)
    • 2.164 in(2)
    • 2.17 in(1)
    • 2.206 in(1)
    • 2.213 in(2)
    • 2.219 in(1)
    • 2.226 in(1)
    • 2.233 in(2)
    • 2.24 in(1)
    • 2.247 in(1)
    • 2.341 in(1)
    • 2.347 in(2)
    • 2.354 in(1)
    • 2.361 in(1)
    • 2.368 in(2)
    • 2.375 in(1)
    • 2.41 in(1)
    • 2.418 in(2)
    • 2.424 in(1)
    • 2.431 in(1)
    • 2.438 in(2)
    • 2.445 in(1)
    • 2.452 in(1)
    • 2.604 in(1)
    • 2.611 in(2)
    • 2.618 in(1)
    • 2.77 in(1)
    • 2.777 in(2)
    • 2.783 in(1)
    • 2.797 in(1)
    • 2.818 in(1)
    • 3.633 in(1)
    • 3.64 in(2)
    • 3.648 in(1)
    • 3.654 in(1)
    • 3.66 in(2)
    • 3.798 in(1)
    • 3.805 in(1)
    • 3.813 in(1)
    • 3.819 in(1)
    • 3.826 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 35.45 mm(2)
    • 35.6 mm(2)
    • 35.801 mm(3)
    • 35.9 mm(2)
    • 35.975 mm(2)
    • 36.1 mm(2)
    • 36.301 mm(2)
    • 36.7 mm(1)
    • 36.85 mm(2)
    • 37.051 mm(3)
    • 37.2 mm(2)
    • 37.4 mm(1)
    • 38.95 mm(1)
    • 39.151 mm(2)
    • 39.301 mm(2)
    • 39.5 mm(2)
    • 40.651 mm(2)
    • 40.801 mm(2)
    • 41.0 mm(2)
    • 41.176 mm(2)
    • 41.901 mm(1)
    • 42.051 mm(2)
    • 42.25 mm(3)
    • 42.401 mm(2)
    • 42.6 mm(1)
    • 44.1 mm(1)
    • 44.276 mm(2)
    • 44.45 mm(1)
    • 44.625 mm(1)
    • 44.801 mm(1)
    • 44.975 mm(1)
    • 46.176 mm(1)
    • 46.35 mm(1)
    • 46.526 mm(1)
    • 46.7 mm(2)
    • 46.875 mm(1)
    • 49.301 mm(1)
    • 49.475 mm(2)
    • 49.651 mm(1)
    • 49.825 mm(1)
    • 50.0 mm(1)
    • 50.176 mm(1)
    • 51.375 mm(1)
    • 51.551 mm(1)
    • 51.725 mm(1)
    • 51.901 mm(2)
    • 52.075 mm(1)
    • 54.25 mm(1)
    • 54.426 mm(2)
    • 54.6 mm(1)
    • 54.776 mm(1)
    • 54.95 mm(2)
    • 55.125 mm(1)
    • 56.026 mm(1)
    • 56.2 mm(2)
    • 56.375 mm(1)
    • 56.551 mm(1)
    • 56.725 mm(2)
    • 56.901 mm(1)
    • 57.075 mm(1)
    • 59.45 mm(1)
    • 59.625 mm(2)
    • 59.801 mm(1)
    • 59.975 mm(1)
    • 60.151 mm(2)
    • 60.325 mm(1)
    • 61.225 mm(1)
    • 61.401 mm(2)
    • 61.575 mm(1)
    • 61.75 mm(1)
    • 61.926 mm(2)
    • 62.1 mm(1)
    • 62.276 mm(1)
    • 66.15 mm(1)
    • 66.325 mm(2)
    • 66.5 mm(1)
    • 70.351 mm(1)
    • 70.525 mm(2)
    • 70.7 mm(1)
    • 71.05 mm(1)
    • 71.575 mm(1)
    • 92.275 mm(1)
    • 92.45 mm(2)
    • 92.625 mm(1)
    • 92.801 mm(1)
    • 92.976 mm(2)
    • 96.476 mm(1)
    • 96.65 mm(1)
    • 96.825 mm(1)
    • 97.0 mm(1)
    • 97.176 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.016 in(4)
    • 0.031 in(45)
    • 0.039 in(6)
    • 0.047 in(12)
    • 0.063 in(6)
    • 0.079 in(6)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(4)
    • 0.8 mm(45)
    • 1.0 mm(6)
    • 1.201 mm(12)
    • 1.6 mm(6)
    • 2.0 mm(6)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(107)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(107)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC7030 (145)
    • KC7140 (198)
    • KC7225 (8)
    • KC7315 (211)
    • KC7410 (183)
    • KCMS15 (183)
    • KCPM45 (183)
    • KCU25 (212)
    • KCU40 (217)
    • YYMISF (10)
    Hand Of Tool
    Hand Of Tool
    • R (183)
    Wiper Insert
    Wiper Insert
    • N (107)
    Drill Type
    Drill Type
    • 86-01 (183)
    Front-End
    Insert Shape
    Insert Shape
    • B-PARALLELOGRAM 82 (11)
    • D-DIAMOND/RHOMBIC 90 (127)
    • KSEM DRILL (211)
    • X-TRIGON 84 (124)
    Gage Length
    Gage Length
    • 2.992 in(2)
    • 3.228 in(2)
    • 3.622 in(2)
    • 3.938 in(2)
    • 4.409 in(2)
    • 4.803 in(2)
    • 5.039 in(2)
    • 5.513 in(2)
    • 5.748 in(2)
    • 6.063 in(2)
    • 6.535 in(2)
    • 6.772 in(2)
    • 7.205 in(2)
    • 7.48 in(2)
    • 7.559 in(2)
    • 8.11 in(2)
    • 8.346 in(2)
    • 8.504 in(2)
    • 8.976 in(2)
    • 9.606 in(2)
    • 10.198 in(2)
    • 10.669 in(2)
    • 11.142 in(2)
    • 11.378 in(2)
    • 11.496 in(2)
    • 11.969 in(2)
    • 12.638 in(2)
    • 12.874 in(2)
    • 13.307 in(2)
    • 13.583 in(2)
    • 14.214 in(2)
    • 14.252 in(2)
    • 15.079 in(2)
    • 15.394 in(2)
    • 15.866 in(2)
    • 16.89 in(2)
    • 17.283 in(2)
    • 17.756 in(2)
    • 17.795 in(2)
    • 19.331 in(2)
    • 19.803 in(2)
    • 19.962 in(2)
    • 21.614 in(2)
    • 22.126 in(2)
    • 22.402 in(2)
    • 24.134 in(2)
    • 25.157 in(2)
    • 27.283 in(2)
    • 30.669 in(2)
    Gage Length
    Gage Length
    • 100 mm(2)
    • 112 mm(2)
    • 122 mm(2)
    • 128 mm(2)
    • 140 mm(2)
    • 146 mm(2)
    • 154 mm(2)
    • 166 mm(2)
    • 172 mm(2)
    • 183 mm(2)
    • 190 mm(2)
    • 192 mm(2)
    • 206 mm(2)
    • 212 mm(2)
    • 216 mm(2)
    • 228 mm(2)
    • 244 mm(2)
    • 259 mm(2)
    • 271 mm(2)
    • 283 mm(2)
    • 289 mm(2)
    • 292 mm(2)
    • 304 mm(2)
    • 321 mm(2)
    • 327 mm(2)
    • 338 mm(2)
    • 345 mm(2)
    • 361 mm(2)
    • 362 mm(2)
    • 383 mm(2)
    • 391 mm(2)
    • 403 mm(2)
    • 429 mm(2)
    • 439 mm(2)
    • 451 mm(2)
    • 452 mm(2)
    • 491 mm(2)
    • 503 mm(2)
    • 507 mm(2)
    • 549 mm(2)
    • 562 mm(2)
    • 569 mm(2)
    • 613 mm(2)
    • 639 mm(2)
    • 693 mm(2)
    • 76 mm(2)
    • 779 mm(2)
    • 82 mm(2)
    • 92 mm(2)
    Point Angle
    Point Angle
    • 140.0 (119)
    Point Angle MintoPoint Angle Max
    Insert Geometry
    Shape
    Shape
    • B-PARALLELOGRAM 82 (4)
    • D-DIAMOND/RHOMBIC 90 (30)
    • KSEM DRILL (28)
    • X-TRIGON 84 (45)
    Insert IC Size
    Insert IC Size
    • 8.0 mm(14)
    • 10.0 mm(15)
    • 12.0 mm(10)
    • 15.0 mm(10)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.315 in(14)
    • 0.394 in(15)
    • 0.473 in(10)
    • 0.591 in(10)
    Insert IC Size MintoInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 1 (3)
    • 10 (4)
    • 2 (1)
    • 3 (3)
    • 4 (2)
    • 5 (2)
    • 6 (2)
    • 7 (2)
    • 8 (2)
    • 9 (4)
    • A (1)
    • B (1)
    • C (1)
    Cutting Edge Length
    Cutting Edge Length
    • 5.301 mm(10)
    • 6.625 mm(15)
    • 7.95 mm(10)
    • 9.925 mm(10)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.209 in(10)
    • 0.261 in(15)
    • 0.313 in(10)
    • 0.391 in(10)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • DS (28)
    • GD (2)
    • HP (28)
    • HPF (5)
    • LD (1)
    • MD (15)
    Cutting Tool Material
    Cutting Tool Material
    • H W (107)
    Cutting Diameter Insert
    Cutting Diameter Insert
    • 0.512 in(1)
    • 0.551 in(1)
    • 0.591 in(1)
    • 0.63 in(1)
    • 0.669 in(1)
    • 0.709 in(1)
    • 0.748 in(1)
    • 0.787 in(1)
    • 0.828 in(1)
    • 0.866 in(1)
    • 0.906 in(1)
    • 0.946 in(1)
    • 0.984 in(1)
    • 1.024 in(1)
    • 1.063 in(1)
    • 1.102 in(1)
    • 1.143 in(1)
    • 1.181 in(1)
    • 1.22 in(1)
    • 1.26 in(1)
    • 1.299 in(1)
    • 1.339 in(1)
    • 1.379 in(1)
    • 1.417 in(1)
    • 1.457 in(1)
    • 1.496 in(1)
    • 1.536 in(1)
    • 1.575 in(1)
    Cutting Diameter Insert MintoCutting Diameter Insert Max
    Cutting Diameter Insert
    Cutting Diameter Insert
    • 13.0 mm(1)
    • 14.0 mm(1)
    • 15.0 mm(1)
    • 16.0 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 20.0 mm(1)
    • 21.0 mm(1)
    • 22.0 mm(1)
    • 23.0 mm(1)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 26.0 mm(1)
    • 27.0 mm(1)
    • 28.0 mm(1)
    • 29.0 mm(1)
    • 30.0 mm(1)
    • 31.0 mm(1)
    • 32.0 mm(1)
    • 33.0 mm(1)
    • 34.0 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(1)
    • 37.0 mm(1)
    • 38.0 mm(1)
    • 39.0 mm(1)
    • 40.0 mm(1)
    Cutting Diameter Insert MintoCutting Diameter Insert Max
    Back-End
    Connection Type
    Connection Type
    • FLEXABLE DRILL SYSTEM (183)
    System Size
    System Size
    • FDS28 (14)
    • FDS32 (16)
    • FDS36 (18)
    • FDS40 (14)
    • FDS45 (12)
    • FDS50 (16)
    • FDS56 (18)
    • FDS63 (22)
    • FDS71 (18)
    • FDS80 (19)
    • FDS90 (16)
    Back-End Diameter
    Back-End Diameter
    • 32.0 mm(15)
    • 38.1 mm(15)
    • 50.0 mm(34)
    • 50.801 mm(34)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.26 in(15)
    • 1.5 in(15)
    • 1.969 in(34)
    • 2.0 in(34)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""

    For any technical inquiries, please reach out to us via our Customer Support center

    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?