KM Micro™ ID Application • S-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (14)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
- K Cast Iron (14)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (14)
- N1Wrought Aluminum (14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
- N3High-Silicon Aluminum Alloys Si >12.2%(14)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
- N6Carbon, Graphite Composites, CFRP (14)
- N7MMC's (8)
- S High-Temp Alloys (14)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
- H Hardened Materials (14)
- H1Hardened Materials 44-48 HRC(14)
- H2Hardened Materials 48-55 HRC(14)
- H3Hardened Materials 56-60 HRC(14)
- H4Hardened Materials >60 HRC(14)
- C CFRP Materials (14)
- C1CFRP, CFRP / CFRP (14)
- C2CFRP / Aluminium CFRP / Non-Ferrous (8)
Applications
Applications
Multiple Direction Cutting (17)
Profiling (9)
TRN Boring (9)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (8)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (4)
- 95.0 (13)
to
Connection Style
Connection Style
- KM (9)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (14)
- 2.0 (6)
- 3.0 (8)
- 4.0 (2)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.787 in(8)
- 1.811 in(6)
- 2.283 in(3)
to
Over All Length [L]
Over All Length [L]
- 20.0 mm(8)
- 46.0 mm(6)
- 58.0 mm(3)
to
Corner Radius
Corner Radius
- 0.0 in(2)
- 0.001 in(2)
- 0.002 in(8)
- 0.004 in(6)
- 0.007 in(6)
- 0.008 in(8)
- 0.015 in(6)
- 0.016 in(14)
- 0.031 in(14)
- 0.047 in(6)
to
Corner Radius
Corner Radius
- 0.0 mm(2)
- 0.025 mm(2)
- 0.05 mm(8)
- 0.1 mm(6)
- 0.176 mm(6)
- 0.2 mm(8)
- 0.375 mm(6)
- 0.4 mm(14)
- 0.8 mm(14)
- 1.201 mm(6)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- ALO (6)
- C2 (6)
- C3 (6)
- CBN6 (6)
- CG5 (10)
- CG6 (6)
- CM1 (10)
- CPD1 (6)
- HT2 (2)
- HTX (2)
- K10M (2)
- K10P (2)
- K10U (2)
- K15U (2)
- K20K (2)
- K25M (2)
- K25P (2)
- K313 (8)
- K68 (8)
- KB1345 (2)
- KB1610 (4)
- KB1625 (4)
- KB1630 (4)
- KB5610 (2)
- KB5625 (4)
- KB5630 (2)
- KB9610 (6)
- KBH10 (2)
- KBH20 (6)
- KC5010 (14)
- KC5020P (2)
- KC5025 (8)
- KC5410 (8)
- KC720 (8)
- KC730 (8)
- KC732 (8)
- KC8050 (8)
- KC810 (8)
- KC850 (8)
- KC9010 (6)
- KC9025 (8)
- KC910 (8)
- KC9105 (8)
- KC9110 (8)
- KC9120 (6)
- KC9125 (8)
- KC9225 (8)
- KC9240 (8)
- KC9240NEW (8)
- KC9315 (8)
- KC9320 (8)
- KC9325 (6)
- KC935 (8)
- KC950 (6)
- KC990 (6)
- KCD25 (8)
- KCK05 (8)
- KCK05B (4)
- KCK15 (6)
- KCK15B (6)
- KCK20 (8)
- KCK20B (8)
- KCM15 (8)
- KCM15B (2)
- KCM25 (8)
- KCM25B (8)
- KCM35 (6)
- KCP05 (8)
- KCP10 (8)
- KCP10B (8)
- KCP25 (8)
- KCP25B (8)
- KCP25C (8)
- KCP30 (8)
- KCS10 (8)
- KCS10B (6)
- KCU10 (14)
- KCU10B (14)
- KCU25 (8)
- KCU25B (14)
- KD050 (4)
- KD100 (4)
- KD105 (2)
- KD120 (4)
- KD1400 (8)
- KD1405 (4)
- KD1425 (8)
- KN10S (2)
- KT175 (6)
- KT315 (8)
- KT325 (2)
- KTP10 (8)
- KTP25S (2)
- KU10 (4)
- KU10T (8)
- KU30T (8)
- TN10P (2)
- TN10U (2)
- TN15M (2)
- TN15U (2)
- TN20K (2)
- TN20P (2)
- TN30M (2)
- TN7 (6)
- W00160 (2)
- WBH10C (2)
- WBH10P (2)
- WBH10U (2)
- WBH25P (2)
- WBH30P (2)
- WDN00U (4)
- WDN10U (6)
- WDN25U (8)
- WK20CT (6)
- WM15CT (4)
- WM25CT (6)
- WP15CT (6)
- WP25CT (8)
- WU10PT (2)
Hand Of Tool
Hand Of Tool
- L (6)
- R (3)
Wiper Insert
Wiper Insert
- N (14)
- Y (4)
F Dimension
F Dimension
- 5.75 mm(3)
- 5.801 mm(3)
- 7.525 mm(3)
to
F Dimension
F Dimension
- 0.226 in(3)
- 0.228 in(3)
- 0.296 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 11.101 mm(3)
- 11.15 mm(3)
- 14.25 mm(3)
- 25.0 mm(4)
- 32.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.437 in(3)
- 0.439 in(3)
- 0.561 in(3)
- 0.984 in(4)
- 1.26 in(4)
to
Cutting Direction
Cutting Direction
- B (9)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (9)
Maximum Bore Depth
Maximum Bore Depth
- 1.614 in(6)
- 2.039 in(3)
to
Maximum Bore Depth
Maximum Bore Depth
- 41.0 mm(6)
- 51.801 mm(3)
to
Boring Bar Material
Boring Bar Material
- S (9)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (5)
- D-DIAMOND/RHOMBIC 55 (2)
- T-TRIANGLE 60 (8)
- V-DIAMOND/RHOMBIC 35 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (6)
- B L (14)
- D P (14)
- H T (14)
- H W (14)
Back-End
Connection Type
Connection Type
- TAPER SHANK (9)
System Size
System Size
- KM2016 (9)
No filters matching ""