Boring Heads for Positive and Negative Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (100)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(100)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(100)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(100)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(100)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(100)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(100)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(100)
- M Stainless Steel (100)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(100)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(100)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(100)
- K Cast Iron (102)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(102)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(100)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(100)
- N Non-Ferrous Materials (102)
- N1Wrought Aluminum (100)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(100)
- N3High-Silicon Aluminum Alloys Si >12.2%(69)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (102)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (100)
- N6Carbon, Graphite Composites, CFRP (100)
- N7MMC's (95)
- S High-Temp Alloys (102)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(102)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(102)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(102)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(102)
- H Hardened Materials (100)
- H1Hardened Materials 44-48 HRC(100)
- H2Hardened Materials 48-55 HRC(100)
- H3Hardened Materials 56-60 HRC(100)
- H4Hardened Materials >60 HRC(71)
- C CFRP Materials (100)
- C1CFRP, CFRP / CFRP (100)
- C2CFRP / Aluminium CFRP / Non-Ferrous (95)
Applications
Applications
Multiple Direction Cutting (93)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (102)
- Lightly Interrupted Cut (102)
- Smooth Cut (102)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 62.5 (1)
- 75.0 (9)
- 90.0 (11)
- 93.0 (39)
- 95.0 (40)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (2)
- 1.0 (69)
- 2.0 (83)
- 3.0 (12)
- 4.0 (79)
- 6.0 (12)
- 8.0 (53)
to
Over All Length [L]
Over All Length [L]
- 0.787 in(2)
- 0.79 in(2)
- 0.984 in(3)
- 1.365 in(1)
- 1.614 in(6)
- 1.625 in(88)
to
Over All Length [L]
Over All Length [L]
- 20.0 mm(2)
- 20.076 mm(2)
- 25.0 mm(3)
- 34.676 mm(1)
- 41.0 mm(6)
- 41.276 mm(88)
to
Corner Radius
Corner Radius
- 0.0 in(2)
- 0.001 in(9)
- 0.002 in(9)
- 0.004 in(70)
- 0.008 in(69)
- 0.014 in(4)
- 0.016 in(91)
- 0.024 in(6)
- 0.031 in(100)
- -0.039 in(2)
- 0.047 in(100)
- 0.062 in(23)
- 0.063 in(77)
- 0.094 in(20)
- 0.095 in(26)
- 0.125 in(2)
- 0.126 in(14)
- 0.157 in(3)
- 0.25 in(2)
to
Corner Radius
Corner Radius
- 0.0 mm(2)
- 0.025 mm(9)
- 0.05 mm(9)
- 0.1 mm(70)
- 0.2 mm(69)
- 0.351 mm(4)
- 0.4 mm(91)
- 0.601 mm(6)
- 0.8 mm(100)
- -1.0 mm(2)
- 1.201 mm(100)
- 1.576 mm(23)
- 1.6 mm(77)
- 2.375 mm(20)
- 2.401 mm(26)
- 3.176 mm(2)
- 3.2 mm(14)
- 4.0 mm(3)
- 6.351 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (71)
- 241 (23)
- AC5 (1)
- CG4 (1)
- CL4 (42)
- CM2 (68)
- CM3 (45)
- CM4 (39)
- CM5 (1)
- CPX (64)
- CW2 (30)
- GH1 (7)
- GX (38)
- HT2 (41)
- HTX (36)
- K060 (41)
- K090 (80)
- K1 (35)
- K1010P (7)
- K10M (88)
- K10P (78)
- K10U (74)
- K11 (3)
- K15U (74)
- K20K (88)
- K21 (43)
- K25M (75)
- K25P (70)
- K2885 (1)
- K313 (100)
- K35P (41)
- K420 (70)
- K45 (52)
- K6 (1)
- K68 (91)
- KB1340 (32)
- KB1345 (48)
- KB1610 (65)
- KB1625 (57)
- KB1630 (51)
- KB5610 (58)
- KB5625 (59)
- KB5630 (52)
- KB9610 (70)
- KB9640 (38)
- KBH10 (68)
- KBH10B (50)
- KBH20 (70)
- KBH20B (50)
- KBK35 (25)
- KC210 (53)
- KC250 (58)
- KC5010 (100)
- KC5020P (7)
- KC5025 (99)
- KC5410 (90)
- KC5510 (84)
- KC5525 (51)
- KC710 (24)
- KC720 (85)
- KC722 (23)
- KC730 (96)
- KC7310 (89)
- KC732 (82)
- KC740 (1)
- KC8050 (100)
- KC810 (99)
- KC850 (101)
- KC9010 (94)
- KC9025 (100)
- KC910 (97)
- KC9105 (92)
- KC9110 (100)
- KC9120 (98)
- KC9125 (99)
- KC9125RR (3)
- KC9140 (88)
- KC9145 (80)
- KC9210 (4)
- KC9215 (84)
- KC9225 (95)
- KC9240 (95)
- KC9240NEW (95)
- KC9245 (84)
- KC9315 (96)
- KC9320 (99)
- KC9325 (95)
- KC935 (100)
- KC950 (94)
- KC990 (99)
- KCD25 (23)
- KCK05 (95)
- KCK05B (93)
- KCK15 (95)
- KCK15B (96)
- KCK20 (95)
- KCK20B (95)
- KCM15 (95)
- KCM15B (91)
- KCM25 (95)
- KCM25B (95)
- KCM25S (9)
- KCM35 (91)
- KCM35B (67)
- KCP05 (86)
- KCP05B (68)
- KCP10 (99)
- KCP10B (100)
- KCP20S (9)
- KCP25 (99)
- KCP25B (100)
- KCP25C (100)
- KCP30 (99)
- KCP30B (74)
- KCP40 (74)
- KCP40B (80)
- KCPK05 (83)
- KCS10 (34)
- KCS10B (96)
- KCS25S (9)
- KCU10 (100)
- KCU10B (100)
- KCU25 (99)
- KCU25B (99)
- KD050 (55)
- KD081 (54)
- KD100 (49)
- KD120 (57)
- KD1400 (62)
- KD1405 (45)
- KD1425 (63)
- KD200 (2)
- KD230 (2)
- KD240 (2)
- KM1 (35)
- KMF (24)
- KN10S (9)
- KS15 (23)
- KT1120 (28)
- KT125 (63)
- KT150 (54)
- KT175 (70)
- KT315 (77)
- KT325 (44)
- KT5020 (12)
- KTP10 (74)
- KTP25S (65)
- KU10 (9)
- KU10T (77)
- KU30T (99)
- KY1310 (56)
- KY1320 (76)
- KY1540 (46)
- KY1615 (77)
- KY2000 (56)
- KY2100 (37)
- KY3000 (74)
- KY3400 (70)
- KY3500 (80)
- KY4000 (45)
- KY4300 (50)
- KY4400 (79)
- KYHK15B (81)
- KYK10 (47)
- KYK25 (67)
- KYK35 (80)
- KYS25 (43)
- KYS30 (49)
- MC2 (1)
- NL200 (27)
- NL250 (83)
- NL300 (54)
- NL400 (44)
- NL920 (55)
- P10 (1)
- P20 (1)
- P25 (29)
- P2F (1)
- PS5 (31)
- SP0819 (56)
- SP0A00 (1)
- SP3019 (55)
- SP4019 (62)
- SP4036 (9)
- SP4093 (9)
- SP4200 (1)
- SP61EJ (3)
- SPADAP (9)
- TN7035 (3)
- TTX (1)
- X00511 (23)
- X00580 (23)
- X00581 (23)
- X00582 (23)
- X00583 (23)
- X00584 (23)
- X00585 (23)
- X00586 (23)
- X00591 (23)
- X00592 (23)
- X00593 (23)
- X00594 (23)
- X00596 (23)
- X00597 (23)
- X00599 (23)
- YY87EL (1)
Hand Of Tool
Hand Of Tool
- L (34)
- R (68)
Wiper Insert
Wiper Insert
- N (102)
- Y (62)
F Dimension
F Dimension
- 16.25 mm(5)
- 17.0 mm(2)
- 19.05 mm(2)
- 19.425 mm(6)
- 21.875 mm(1)
- 22.0 mm(4)
- 22.6 mm(11)
- 25.0 mm(1)
- 25.401 mm(4)
- 25.776 mm(4)
- 27.0 mm(5)
- 28.576 mm(7)
- 31.75 mm(2)
- 32.525 mm(13)
- 33.65 mm(3)
- 34.926 mm(4)
- 35.0 mm(9)
- 38.875 mm(11)
- 38.901 mm(1)
- 44.45 mm(7)
to
F Dimension
F Dimension
- 0.64 in(5)
- 0.669 in(2)
- 0.75 in(2)
- 0.765 in(6)
- 0.861 in(1)
- 0.866 in(4)
- 0.89 in(11)
- 0.984 in(1)
- 1.0 in(4)
- 1.016 in(4)
- 1.063 in(5)
- 1.125 in(7)
- 1.25 in(2)
- 1.281 in(13)
- 1.325 in(3)
- 1.375 in(4)
- 1.379 in(9)
- 1.532 in(12)
- 1.75 in(7)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 30.475 mm(5)
- 32.0 mm(2)
- 33.025 mm(2)
- 37.35 mm(6)
- 40.0 mm(5)
- 43.0 mm(1)
- 43.301 mm(4)
- 44.7 mm(11)
- 50.0 mm(5)
- 50.801 mm(7)
- 51.051 mm(4)
- 57.151 mm(2)
- 60.95 mm(13)
- 63.0 mm(9)
- 63.5 mm(5)
- 67.3 mm(2)
- 76.95 mm(12)
- 82.551 mm(7)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2 in(5)
- 1.26 in(2)
- 1.3 in(2)
- 1.47 in(6)
- 1.575 in(5)
- 1.693 in(1)
- 1.705 in(4)
- 1.76 in(11)
- 1.969 in(5)
- 2.0 in(7)
- 2.011 in(4)
- 2.25 in(2)
- 2.4 in(13)
- 2.48 in(9)
- 2.5 in(5)
- 2.65 in(2)
- 3.031 in(12)
- 3.25 in(7)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -0.039 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(2)
to
Cutting Direction
Cutting Direction
- B (40)
- E (60)
- S (2)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (81)
- NEGATIVE-ZERO (17)
- NEUTRAL (ZERO) (1)
- POSITIVE-NEGATIVE (3)
Maximum Bore Depth
Maximum Bore Depth
- 3.938 in(2)
- 4.0 in(7)
- 4.992 in(1)
- 5.0 in(9)
- 5.039 in(6)
- 6.0 in(18)
- 6.299 in(5)
- 7.0 in(6)
- 7.875 in(9)
- 8.0 in(20)
- 10.0 in(19)
to
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(2)
- 101.601 mm(7)
- 126.801 mm(1)
- 127.0 mm(9)
- 128.0 mm(6)
- 152.4 mm(18)
- 160.0 mm(5)
- 177.8 mm(6)
- 200.0 mm(9)
- 203.201 mm(20)
- 254.0 mm(19)
to
Front-End
Clamp Style
Clamp Style
- C (3)
- M (80)
- P (8)
- S (11)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (41)
- D-DIAMOND/RHOMBIC 55 (27)
- R-ROUND (2)
- S-SQUARE 90 (6)
- T-TRIANGLE 60 (6)
- V-DIAMOND/RHOMBIC 35 (13)
- W-TRIGON 80 (7)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (79)
- B L (73)
- C A (86)
- C N (84)
- D P (71)
- H T (82)
- H W (102)
Back-End
Back-End Diameter
Back-End Diameter
- 25.0 mm(2)
- 25.401 mm(7)
- 31.701 mm(1)
- 31.75 mm(9)
- 32.0 mm(6)
- 38.1 mm(18)
- 40.0 mm(5)
- 44.45 mm(6)
- 50.0 mm(9)
- 50.801 mm(20)
- 63.5 mm(19)
to
Back-End Diameter
Back-End Diameter
- 0.984 in(2)
- 1.0 in(7)
- 1.248 in(1)
- 1.25 in(9)
- 1.26 in(6)
- 1.5 in(18)
- 1.575 in(5)
- 1.75 in(6)
- 1.969 in(9)
- 2.0 in(20)
- 2.5 in(19)
to
No filters matching ""
