Ramping: Blank
Slotting: Ball Nose
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 5153895 |
| ISO Catalog ID | KDR100Z08S32RN16 |
| ANSI Catalog ID | KDR100Z08S32RN16 |
| [D1MAX] Maximum Cutting Diameter | 100 mm |
| [D1MAX] Maximum Cutting Diameter | 3.937 in |
| [D1] Effective Cutting Diameter | 84 mm |
| [D1] Effective Cutting Diameter | 3.307 in |
| [D] Adapter / Shank / Bore Diameter | 32 mm |
| [D] Adapter / Shank / Bore Diameter | 1.26 in |
| [D6] Hub Diameter | 78 mm |
| [D6] Hub Diameter | 3.071 in |
| [L] Overall Length | 50 mm |
| [L] Overall Length | 1.969 in |
| [AP1MAX] 1st Maximum Cutting Depth | 3.96 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .156 in |
| Number of Inserts | 8 |
| Maximum Ramping Angle | 0.26 |
| Weight Kilograms | 1.52 |
| Max RPM | 17000 |
| Gage Insert | RNGJ1605M0____ |
Ramping: BlankSlotting: Ball NoseSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Through CoolantMilling - Side and FacePocketingCreate Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..LDJ | KC725M | .S..GD | KCPM40 | .S..HD | KCPM40 |
| P3–P4 | .E..LDJ | KC522M | .S..GD | KCPK30 | .S..HD | KCPM40 |
| P5–P6 | .E..LDJ | KC725M | .S..GD | KC725M | .S..HD | KC725M |
| M1–M2 | .E..LDJ | KC522M | .S..HD | KC725M | .S..GD | KCSM40 |
| M3 | .E..LDJ | KC725M | .S..GD | KCPM40 | .S..HD | KCPM40 |
| K1–K2 | .S..HD | KC520M | .S..HD | KC520M | .S..HD | KCK15 |
| K3 | .S..GD | KCPK30 | .S..HD | KC520M | .S..HD | KCK15 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..LDJ | KC725M | .S..GD | KCSM40 | .S..HD | KC725M |
| S3 | .E..LDJ | KC725M | .S..GD | KCSM40 | .S..HD | KCPM40 |
| S4 | .E..LDJ | KC522M | .S..GD | KCSM40 | .S..HD | KC725M |
| H1 | – | – | – | – | – | – |
| Insert Geometry | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..LDJ | 0,12 | 0,44 | 0,80 | 0,09 | 0,32 | 0,57 | 0,07 | 0,24 | 0,43 | 0,06 | 0,21 | 0,37 | 0,05 | 0,19 | 0,34 | .E..LDJ |
| .E..LD | 0,12 | 0,44 | 0,80 | 0,09 | 0,32 | 0,57 | 0,07 | 0,24 | 0,43 | 0,06 | 0,21 | 0,37 | 0,05 | 0,19 | 0,34 | .E..LD |
| .S..GD | 0,23 | 0,50 | 0,89 | 0,17 | 0,36 | 0,64 | 0,13 | 0,27 | 0,48 | 0,11 | 0,24 | 0,42 | 0,10 | 0,22 | 0,38 | .S..GD |
| .S..HD | 0,23 | 0,59 | 0,95 | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,25 | 0,41 | .S..HD |
| Light | General | Heavy |
| Insert Geometry | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40%–100% | ||||||||||||
| .E..LDJ | 0,17 | 0,61 | 1,10 | 0,12 | 0,44 | 0,79 | 0,09 | 0,33 | 0,59 | 0,08 | 0,29 | 0,51 | 0,07 | 0,26 | 0,47 | .E..LDJ |
| .E..LD | 0,17 | 0,61 | 1,10 | 0,12 | 0,44 | 0,79 | 0,09 | 0,33 | 0,59 | 0,08 | 0,29 | 0,51 | 0,07 | 0,26 | 0,47 | .E..LD |
| .S..GD | 0,32 | 0,70 | 1,24 | 0,23 | 0,50 | 0,89 | 0,18 | 0,38 | 0,66 | 0,15 | 0,33 | 0,58 | 0,14 | 0,30 | 0,53 | .S..GD |
| .S..HD | 0,32 | 0,81 | 1,32 | 0,23 | 0,59 | 0,94 | 0,18 | 0,44 | 0,70 | 0,15 | 0,38 | 0,61 | 0,14 | 0,35 | 0,56 | .S..HD |
| Insert Geometry | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40%–100% | ||||||||||||
| .E..LDJ | 0,26 | 0,92 | 1,67 | 0,19 | 0,66 | 1,19 | 0,14 | 0,49 | 0,89 | 0,12 | 0,43 | 0,77 | 0,11 | 0,39 | 0,71 | .E..LDJ |
| .E..LD | 0,26 | 0,92 | 1,67 | 0,19 | 0,66 | 1,19 | 0,14 | 0,49 | 0,89 | 0,12 | 0,43 | 0,77 | 0,11 | 0,39 | 0,71 | .E..LD |
| .S..GD | 0,49 | 1,05 | 1,88 | 0,35 | 0,75 | 1,34 | 0,26 | 0,56 | 0,99 | 0,23 | 0,49 | 0,86 | 0,21 | 0,45 | 0,79 | .S..GD |
| .S..HD | 0,49 | 1,23 | 2,00 | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,52 | 0,84 | .S..HD |
| Insert Geometry | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40%–100% | ||||||||||||
| .E..LDJ | 0,21 | 0,76 | 1,38 | 0,15 | 0,55 | 0,99 | 0,12 | 0,41 | 0,74 | 0,10 | 0,36 | 0,64 | 0,09 | 0,33 | 0,59 | .E..LDJ |
| .E..LD | 0,21 | 0,76 | 1,38 | 0,15 | 0,55 | 0,99 | 0,12 | 0,41 | 0,74 | 0,10 | 0,36 | 0,64 | 0,09 | 0,33 | 0,59 | .E..LD |
| .S..GD | 0,40 | 0,87 | 1,55 | 0,29 | 0,63 | 1,11 | 0,22 | 0,47 | 0,82 | 0,19 | 0,41 | 0,72 | 0,17 | 0,37 | 0,66 | .S..GD |
| .S..HD | 0,40 | 1,02 | 1,65 | 0,29 | 0,73 | 1,18 | 0,22 | 0,55 | 0,87 | 0,19 | 0,48 | 0,76 | 0,17 | 0,44 | 0,70 | .S..HD |
| Material Group | KCK15 | KC520M | KCPM20 | KC522M | KC725M | KCMP30 | KCPK30 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 660 | 580 | 535 | 395 | 345 | 325 | 315 | 275 | 255 | 545 | 475 | 440 | 545 | 475 | 440 |
| 2 | – | – | – | – | – | – | 410 | 370 | 330 | 330 | 290 | 240 | 260 | 230 | 195 | 335 | 305 | 275 | 335 | 305 | 275 | |
| 3 | – | – | – | – | – | – | 370 | 330 | 305 | 305 | 255 | 215 | 240 | 205 | 170 | 305 | 275 | 250 | 305 | 275 | 250 | |
| 4 | – | – | – | – | – | – | 275 | 255 | 230 | 270 | 225 | 180 | 215 | 180 | 145 | 225 | 210 | 190 | 225 | 210 | 190 | |
| 5 | – | – | – | – | – | – | 330 | 300 | 275 | 225 | 200 | 180 | 180 | 160 | 145 | 310 | 275 | 255 | 310 | 275 | 255 | |
| 6 | – | – | – | – | – | – | 230 | 200 | 175 | 200 | 150 | 120 | 160 | 120 | 95 | 190 | 165 | – | 190 | 165 | – | |
| M | 1 | – | – | – | – | – | – | 270 | 240 | 205 | 245 | 215 | 200 | 205 | 180 | 165 | 250 | 220 | 190 | 250 | 220 | 190 |
| 2 | – | – | – | – | – | – | 245 | 215 | 190 | 225 | 190 | 160 | 185 | 160 | 130 | 225 | 195 | 170 | 225 | 195 | 170 | |
| 3 | – | – | – | – | – | – | 195 | 175 | 150 | 170 | 145 | 115 | 140 | 120 | 95 | 175 | 160 | 140 | 175 | 160 | 140 | |
| K | 1 | 505 | 460 | 410 | 325 | 295 | 260 | 435 | 390 | 350 | 275 | 250 | 220 | – | – | – | – | – | – | – | – | – |
| 2 | 400 | 355 | 330 | 255 | 225 | 215 | 345 | 310 | 280 | 215 | 195 | 180 | – | – | – | – | – | – | – | – | – | |
| 3 | 335 | 300 | 275 | 215 | 190 | 170 | 290 | 255 | 240 | 180 | 160 | 145 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | 45 | 35 | 30 | 45 | 35 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | 45 | 35 | 30 | 45 | 35 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | 55 | 45 | 30 | 55 | 45 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | 75 | 55 | 35 | 75 | 55 | 35 | |
| H | 1 | – | – | – | – | – | – | 170 | 140 | 115 | 145 | 110 | 85 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?