KVNS™ A2™ • One Cutting Edge • Ap1 max 85mm • Ae 1
The KVNS A2 slotting cutter and inserts from Kennametal are ideal for precision slotting and profiling applications. With slot cutter diameters spanning from 2.50 to 10 inches and insert widths ranging from .063 to .245 inches, this cutter system is the epitome of versatility and adaptability. Whether you're machining with small groove widths or on materials including steel, cast iron, stainless steel, aluminum alloys, the KVNS A2 slotting cutters deliver optimum performance. The KVNS self-clamping inserts and fixed stop insert seat ensure hassle-free operation and precise results every time. Plus, with drive rings and support rings available for maximum stability, you can trust this cutter to handle even the toughest machining tasks with ease. From flat-bottom slotting to cut-off operations, the slotting cutting system offers positive chipforming insert geometry that guarantees exceptional quality and efficiency.
- P Steel (51)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(51)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(51)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(51)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(51)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(51)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(51)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(51)
- M Stainless Steel (51)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(51)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(51)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(51)
- K Cast Iron (51)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(51)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(51)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(51)
- N Non-Ferrous Materials (43)
- N1Wrought Aluminum (43)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(43)
- N3High-Silicon Aluminum Alloys Si >12.2%(43)
- S High-Temp Alloys (55)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(43)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(43)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(43)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(55)
- Slot Milling (43)
- Slot Side (43)
- 2.48 in(3)
- 2.5 in(2)
- 3.0 in(6)
- 3.15 in(4)
- 3.938 in(4)
- 4.0 in(5)
- 4.921 in(4)
- 5.0 in(4)
- 6.0 in(2)
- 6.299 in(3)
- 7.875 in(2)
- 8.0 in(1)
- 9.843 in(1)
- 10.0 in(2)
- 63.0 mm(3)
- 63.5 mm(2)
- 76.2 mm(6)
- 80.0 mm(4)
- 100.0 mm(4)
- 101.601 mm(5)
- 125.0 mm(4)
- 127.0 mm(4)
- 152.4 mm(2)
- 160.0 mm(3)
- 200.0 mm(2)
- 203.201 mm(1)
- 250.0 mm(1)
- 254.0 mm(2)
- 1.6 mm(8)
- 2.2 mm(8)
- 3.0 mm(14)
- 4.0 mm(9)
- 5.0 mm(1)
- 6.0 mm(3)
- 0.063 in(8)
- 0.088 in(8)
- 0.119 in(14)
- 0.157 in(9)
- 0.197 in(1)
- 0.237 in(3)
- 90.0 (43)
- 2 Key & Cutter Retention Screw (21)
- 2 Key & Socket Head Cap Screw (22)
- 11 (8)
- 14 (5)
- 19 (3)
- 24 (3)
- 4 (3)
- 5 (4)
- 6 (4)
- 7 (4)
- 8 (1)
- 9 (8)
- 1.0 (56)
- 0.006 in(11)
- 0.008 in(40)
- 0.012 in(5)
- 0.151 mm(11)
- 0.2 mm(40)
- 0.301 mm(5)
- 0.0 mm(56)
- 0.0 in(56)
- KC735M (43)
- KC925M (43)
- KC930M (43)
- KCPK30 (52)
- KMF (43)
- N (43)
- N (13)
- 0.063 in(3)
- 0.088 in(2)
- 0.089 in(1)
- 0.12 in(3)
- 0.159 in(4)
- 0.239 in(1)
- 1.6 mm(3)
- 2.2 mm(2)
- 2.25 mm(1)
- 3.051 mm(3)
- 4.05 mm(4)
- 6.051 mm(1)
- PRISMATIC (56)
- 0.591 in(3)
- 0.625 in(2)
- 0.828 in(4)
- 0.875 in(6)
- 1.063 in(9)
- 1.375 in(4)
- 1.379 in(4)
- 1.438 in(2)
- 1.575 in(3)
- 2.25 in(1)
- 2.362 in(2)
- 3.25 in(2)
- 3.346 in(1)
- 15.0 mm(3)
- 15.875 mm(2)
- 21.0 mm(4)
- 22.225 mm(6)
- 27.0 mm(9)
- 34.926 mm(4)
- 35.0 mm(4)
- 36.525 mm(2)
- 40.0 mm(3)
- 57.151 mm(1)
- 60.0 mm(2)
- 82.551 mm(2)
- 85.0 mm(1)
- PRISMATIC (13)
- 1 (3)
- 2 (3)
- 3 (3)
- 4 (3)
- 6 (1)
- H W (13)
- ARBOR (43)
- 15.875 mm(8)
- 16.0 mm(7)
- 22.0 mm(4)
- 25.401 mm(5)
- 31.75 mm(6)
- 32.0 mm(4)
- 40.0 mm(6)
- 50.801 mm(3)
- 0.625 in(8)
- 0.63 in(7)
- 0.866 in(4)
- 1.0 in(5)
- 1.25 in(6)
- 1.26 in(4)
- 1.575 in(6)
- 2.0 in(3)