S-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (8)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(8)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(8)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(8)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(8)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(8)
- M Stainless Steel (8)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(8)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(8)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(8)
- K Cast Iron (8)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(8)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(8)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(8)
- N Non-Ferrous Materials (8)
- N1Wrought Aluminum (8)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(8)
- N3High-Silicon Aluminum Alloys Si >12.2%(8)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (8)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (8)
- N6Carbon, Graphite Composites, CFRP (8)
- N7MMC's (8)
- S High-Temp Alloys (8)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(8)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(8)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(8)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(8)
- H Hardened Materials (8)
- H1Hardened Materials 44-48 HRC(8)
- H2Hardened Materials 48-55 HRC(8)
- H3Hardened Materials 56-60 HRC(8)
- H4Hardened Materials >60 HRC(8)
- C CFRP Materials (8)
- C1CFRP, CFRP / CFRP (8)
- C2CFRP / Aluminium CFRP / Non-Ferrous (8)
Applications
Applications
Facing (8)
ID Facing (8)
Multiple Direction Cutting (8)
TRN Boring (8)
Turning (8)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (8)
- Lightly Interrupted Cut (8)
- Smooth Cut (8)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (4)
- 95.0 (2)
- 107.5 (2)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (8)
- 2.0 (8)
- 4.0 (2)
to
Corner Radius
Corner Radius
- 0.0 in(2)
- 0.001 in(4)
- 0.002 in(8)
- 0.004 in(8)
- 0.008 in(8)
- 0.016 in(8)
- 0.031 in(8)
- 0.047 in(8)
- 0.063 in(2)
to
Corner Radius
Corner Radius
- 0.0 mm(2)
- 0.025 mm(4)
- 0.05 mm(8)
- 0.1 mm(8)
- 0.2 mm(8)
- 0.4 mm(8)
- 0.8 mm(8)
- 1.201 mm(8)
- 1.6 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- GH1 (2)
- HCK10 (4)
- HK1500 (8)
- HK35 (2)
- HT2 (8)
- HTX (8)
- HWK15 (4)
- K1010P (2)
- K10M (6)
- K10U (8)
- K15U (8)
- K20K (2)
- K25M (4)
- K25P (4)
- K313 (8)
- K420 (2)
- K68 (8)
- KB1345 (4)
- KB1610 (8)
- KB1625 (6)
- KB1630 (2)
- KB5610 (8)
- KB5625 (8)
- KB5630 (8)
- KB9610 (8)
- KBH10 (8)
- KBH20 (8)
- KC5010 (8)
- KC5020P (6)
- KC5025 (8)
- KC5410 (8)
- KC720 (8)
- KC730 (8)
- KC732 (8)
- KC8050 (8)
- KC810 (8)
- KC850 (8)
- KC9010 (4)
- KC9025 (8)
- KC910 (8)
- KC9105 (8)
- KC9110 (8)
- KC9120 (4)
- KC9125 (8)
- KC9225 (8)
- KC9240 (8)
- KC9240NEW (8)
- KC9315 (8)
- KC9320 (8)
- KC9325 (4)
- KC935 (8)
- KC950 (8)
- KC990 (4)
- KCD25 (8)
- KCK05 (8)
- KCK05B (8)
- KCK15 (8)
- KCK15B (8)
- KCK20 (8)
- KCK20B (8)
- KCM15 (8)
- KCM15B (8)
- KCM25 (8)
- KCM25B (8)
- KCM25S (4)
- KCM35 (8)
- KCM35B (4)
- KCP05 (8)
- KCP05B (6)
- KCP10 (8)
- KCP10B (8)
- KCP15 (4)
- KCP20S (4)
- KCP25 (8)
- KCP25B (8)
- KCP25C (8)
- KCP30 (8)
- KCP30B (2)
- KCP40B (4)
- KCS10 (8)
- KCS10B (8)
- KCS25S (4)
- KCU10 (8)
- KCU10B (8)
- KCU25 (8)
- KCU25B (8)
- KD050 (6)
- KD081 (6)
- KD100 (4)
- KD1400 (8)
- KD1405 (4)
- KD1425 (8)
- KN10S (4)
- KT125 (2)
- KT175 (8)
- KT315 (8)
- KT325 (8)
- KTP10 (8)
- KTP25S (8)
- KU10 (8)
- KU10T (8)
- KU30T (8)
- PB100 (2)
- PB250 (2)
- PD100 (4)
- PD50 (2)
- SPN3W1 (2)
- THM (8)
- THM-X (4)
- TN10P (8)
- TN10U (8)
- TN15M (8)
- TN15U (8)
- TN2000 (8)
- TN20K (8)
- TN20P (8)
- TN30M (8)
- TN4000 (6)
- TN5015 (4)
- TN5020 (8)
- TN5105 (4)
- TN5120 (8)
- TN6010 (4)
- TN6025 (4)
- TN7005 (8)
- TN7010 (8)
- TN7015 (8)
- TN7025 (8)
- TN7035 (8)
- TN7105 (8)
- TN7110 (8)
- TN7115 (8)
- TN7125 (8)
- TN7135 (8)
- TN8025 (4)
- TTI15 (8)
- TTM (2)
- TTR (4)
- TTS (2)
- TTX (8)
- W00342 (2)
- WBH10C (8)
- WBH10P (8)
- WBH10U (8)
- WBH20P (4)
- WBH25P (8)
- WBH25U (6)
- WBH30P (8)
- WBK45U (4)
- WDN00U (2)
- WDN25U (8)
- WK05CT (4)
- WK15CT (8)
- WK20CT (8)
- WM15CT (8)
- WM25CT (8)
- WP15CT (8)
- WP20TT (2)
- WP25CT (8)
- WP35CT (8)
- WS10PT (4)
- WS25PT (4)
- WU05PT (4)
- WU10HT (8)
- WU10PT (8)
- WU25PT (8)
Hand Of Tool
Hand Of Tool
- L (4)
- R (4)
Wiper Insert
Wiper Insert
- N (8)
- Y (4)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 80.0 mm(2)
- 110.0 mm(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 3.15 in(2)
- 4.331 in(6)
to
Cutting Direction
Cutting Direction
- B (2)
- S (6)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- D-DIAMOND/RHOMBIC 55 (2)
- V-DIAMOND/RHOMBIC 35 (4)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (8)
- B L (8)
- C N (2)
- D P (8)
- H T (8)
- H W (8)
No filters matching ""
