Deep-Hole Drilling (up to 10xD) • HTS systems
The HTS deep-hole drilling can drill as deep as 10x diameter while still maintaining accuracy and stability. The system’s exclusive High-Speed Steel (HSS) pilot drill design makes this deep-hole capability possible. By precutting and then remaining constantly in the cut, the pilot drill provides excellent guiding and centering of the drill head, even at greater depths. With the modular design of the HTS system, you can construct different drilling combinations from a variety of standard components. Cartridges can be modified to produce specific diameters within the limits of each head and can be replaced quickly with a single mounting screw. The internal coolant supply of the HTS system cools the cutting edges and assists chip evacuation. Ensure that your tools are stable and make the proper connection with the HTS deep-hole drilling system.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (278)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(278)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(278)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(278)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(278)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(278)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(278)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(278)
- M Stainless Steel (277)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(277)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(277)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(277)
- K Cast Iron (291)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(291)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(291)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(291)
- N Non-Ferrous Materials (242)
- N1Wrought Aluminum (242)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(242)
- N3High-Silicon Aluminum Alloys Si >12.2%(238)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (242)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (242)
- N6Carbon, Graphite Composites, CFRP (242)
- N7MMC's (222)
- S High-Temp Alloys (267)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(267)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(267)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(267)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(267)
- H Hardened Materials (113)
- H1Hardened Materials 44-48 HRC(113)
- H2Hardened Materials 48-55 HRC(113)
- H3Hardened Materials 56-60 HRC(113)
- H4Hardened Materials >60 HRC(113)
Select First Choice
- BR (21)
- CN (69)
- DE (69)
- GB (53)
- IN (29)
- SG (52)
- US (69)
Applications
Applications
Convex Drilling (1)
Drilling (61)
Cutting Diameter
Cutting Diameter
- 0.197 in(1)
- 0.237 in(1)
- 0.315 in(7)
- 0.394 in(7)
- 0.591 in(3)
- 0.787 in(3)
- 0.984 in(3)
- 1.181 in(3)
- 1.575 in(1)
- 1.693 in(1)
- 1.772 in(1)
- 1.811 in(1)
- 1.929 in(1)
- 1.969 in(1)
- 2.047 in(1)
- 2.165 in(1)
- 2.283 in(1)
- 2.48 in(2)
- 2.677 in(1)
- 2.874 in(1)
- 3.071 in(2)
- 3.307 in(1)
- 3.543 in(1)
- 3.781 in(2)
- 4.016 in(1)
- 4.252 in(1)
- 4.529 in(1)
- 4.803 in(1)
- 5.118 in(1)
- 5.513 in(1)
- 5.906 in(1)
- 6.22 in(1)
- 6.378 in(1)
- 7.087 in(1)
- 7.678 in(1)
- 8.387 in(1)
- 9.055 in(1)
- 10.236 in(1)
to
Cutting Diameter
Cutting Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(7)
- 10.0 mm(7)
- 15.0 mm(3)
- 20.0 mm(3)
- 25.0 mm(3)
- 30.0 mm(3)
- 40.0 mm(1)
- 43.0 mm(1)
- 45.0 mm(1)
- 46.0 mm(1)
- 49.0 mm(1)
- 50.0 mm(1)
- 52.0 mm(1)
- 55.0 mm(1)
- 58.0 mm(1)
- 63.0 mm(2)
- 68.0 mm(1)
- 73.0 mm(1)
- 78.0 mm(2)
- 84.0 mm(1)
- 90.0 mm(1)
- 96.0 mm(2)
- 102.0 mm(1)
- 108.0 mm(1)
- 115.0 mm(1)
- 122.0 mm(1)
- 130.0 mm(1)
- 140.0 mm(1)
- 150.0 mm(1)
- 158.0 mm(1)
- 162.0 mm(1)
- 180.0 mm(1)
- 195.0 mm(1)
- 213.0 mm(1)
- 230.0 mm(1)
- 260.0 mm(1)
to
Cutting Condition
Cutting Condition
- Interrupted (114)
- Stable (188)
- Unstable (136)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 8.0 mm(2)
- 9.601 mm(1)
- 10.0 mm(2)
- 11.3 mm(1)
- 430.0 mm(1)
- 460.0 mm(1)
- 490.0 mm(1)
- 500.0 mm(1)
- 520.0 mm(1)
- 550.0 mm(2)
- 580.0 mm(1)
- 630.0 mm(1)
- 680.0 mm(2)
- 750.0 mm(7)
- 780.0 mm(3)
- 1000.0 mm(5)
- 1060.0 mm(3)
- 1360.0 mm(4)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.315 in(2)
- 0.378 in(1)
- 0.394 in(2)
- 0.445 in(1)
- 16.93 in(1)
- 18.11 in(1)
- 19.291 in(1)
- 19.685 in(1)
- 20.472 in(1)
- 21.654 in(2)
- 22.835 in(1)
- 24.803 in(1)
- 26.773 in(2)
- 29.529 in(7)
- 30.709 in(3)
- 39.37 in(5)
- 41.732 in(3)
- 53.543 in(4)
to
Reach
Reach
- 0.37 in(1)
- 0.378 in(1)
- 0.4 in(2)
- 0.445 in(2)
- 0.473 in(2)
- 0.681 in(1)
- 0.906 in(1)
- 1.143 in(1)
- 1.417 in(1)
to
Reach
Reach
- 9.4 mm(1)
- 9.601 mm(1)
- 10.15 mm(2)
- 11.3 mm(2)
- 12.0 mm(2)
- 17.3 mm(1)
- 23.0 mm(1)
- 29.0 mm(1)
- 36.0 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- -8888.0 (33)
to
Connection Style
Connection Style
- HTS (33)
- HTS Pilot Drill Shank (18)
- HTS-C Pilot Drill Shank (4)
- HTS-R Pilot Drill Shank (6)
Number of Flutes
Number of Flutes
- 2 (61)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (76)
- 4.0 (113)
to
Over All Length [L]
Over All Length [L]
- 1.079 in(1)
- 1.201 in(1)
- 1.457 in(1)
- 1.496 in(1)
- 1.752 in(5)
- 2.008 in(1)
- 2.146 in(4)
- 2.265 in(1)
- 2.717 in(1)
- 3.346 in(2)
- 3.74 in(1)
- 3.938 in(3)
- 4.134 in(4)
- 4.529 in(4)
- 4.724 in(4)
- 5.118 in(3)
- 5.71 in(3)
- 6.299 in(4)
- 7.283 in(2)
- 7.875 in(1)
- 9.055 in(2)
to
Over All Length [L]
Over All Length [L]
- 27.401 mm(1)
- 30.5 mm(1)
- 37.0 mm(1)
- 38.0 mm(1)
- 44.5 mm(5)
- 51.0 mm(1)
- 54.5 mm(4)
- 57.5 mm(1)
- 69.0 mm(1)
- 85.0 mm(2)
- 95.0 mm(1)
- 100.0 mm(3)
- 105.0 mm(4)
- 115.0 mm(4)
- 120.0 mm(4)
- 130.0 mm(3)
- 145.0 mm(3)
- 160.0 mm(4)
- 185.0 mm(2)
- 200.0 mm(1)
- 230.0 mm(2)
to
Corner Radius
Corner Radius
- 0.008 in(7)
- 0.012 in(5)
- 0.016 in(132)
- 0.024 in(8)
- 0.031 in(137)
- 0.039 in(52)
- 0.047 in(72)
- 0.063 in(45)
- 0.079 in(22)
to
Corner Radius
Corner Radius
- 0.2 mm(7)
- 0.301 mm(5)
- 0.4 mm(132)
- 0.601 mm(8)
- 0.8 mm(137)
- 1.0 mm(52)
- 1.201 mm(72)
- 1.6 mm(45)
- 2.0 mm(22)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(253)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(253)
to
Application
Coating
Coating
- TiN (16)
- Uncoated (4)
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- A30 (8)
- AS3 (12)
- CD4 (44)
- CM4 (35)
- CS5 (83)
- K6 (10)
- KC7020 (15)
- KC7025 (15)
- KC7140 (117)
- KC720 (86)
- KC7210 (35)
- KC7215 (114)
- KC7225 (97)
- KC7315 (6)
- KC7325 (2)
- KC7815 (97)
- KC7820 (87)
- KC7845 (10)
- KC7935 (82)
- KC810 (82)
- KC990 (82)
- KCMS35 (105)
- KCPK10 (122)
- KCU25 (143)
- KCU40 (144)
- KD1425 (91)
- KM1 (50)
- KMF (82)
- KU40D (82)
Hand Of Tool
Hand Of Tool
- R (61)
Wiper Insert
Wiper Insert
- N (189)
Drill Type
Drill Type
- 81-06 (28)
- 86-01 (33)
Front-End
Insert Shape
Insert Shape
- B-PARALLELOGRAM 82 (10)
- S-SQUARE 90 (233)
- W-TRIGON 80 (38)
- X-TRIGON 84 (44)
Gage Length
Gage Length
- 2.394 in(1)
- 2.972 in(2)
- 3.346 in(2)
- 3.426 in(3)
- 3.543 in(2)
- 3.551 in(1)
- 3.622 in(2)
- 3.697 in(1)
- 3.701 in(4)
- 3.781 in(2)
- 3.898 in(1)
- 3.938 in(2)
- 4.173 in(1)
- 4.331 in(2)
- 4.409 in(2)
- 4.484 in(1)
- 4.921 in(2)
- 5.315 in(1)
- 5.5 in(2)
- 6.299 in(3)
- 6.453 in(1)
- 6.644 in(1)
- 6.891 in(1)
- 7.144 in(1)
- 7.875 in(2)
- 8.051 in(1)
- 8.268 in(4)
- 8.346 in(2)
- 8.661 in(1)
- 9.222 in(1)
- 10.551 in(1)
- 11.144 in(2)
- 11.222 in(1)
- 12.144 in(1)
- 12.205 in(2)
- 12.283 in(2)
- 12.362 in(3)
- 12.441 in(1)
- 13.051 in(1)
- 13.13 in(1)
- 14.173 in(1)
- 15.551 in(1)
- 15.722 in(1)
- 17.645 in(2)
- 18.052 in(1)
- 18.11 in(2)
- 18.189 in(2)
- 18.268 in(1)
- 19.222 in(1)
- 19.645 in(1)
- 20.079 in(1)
- 20.236 in(1)
- 20.315 in(1)
- 21.13 in(1)
- 24.094 in(2)
- 24.174 in(1)
- 25.722 in(1)
- 31.13 in(1)
Gage Length
Gage Length
- 210 mm(4)
- 94 mm(4)
- 160 mm(3)
- 314 mm(3)
- 87 mm(3)
- 100 mm(2)
- 110 mm(2)
- 112 mm(2)
- 125 mm(2)
- 200 mm(2)
- 212 mm(2)
- 310 mm(2)
- 312 mm(2)
- 460 mm(2)
- 462 mm(2)
- 612 mm(2)
- 85 mm(2)
- 90 mm(2)
- 92 mm(2)
- 96 mm(2)
- 106 mm(1)
- 135 mm(1)
- 175 mm(1)
- 220 mm(1)
- 268 mm(1)
- 316 mm(1)
- 360 mm(1)
- 395 mm(1)
- 464 mm(1)
- 510 mm(1)
- 514 mm(1)
- 516 mm(1)
- 614 mm(1)
- 99 mm(1)
- 60.801 mm(1)
- 75.5 mm(2)
- 90.2 mm(1)
- 93.9 mm(1)
- 113.9 mm(1)
- 139.701 mm(2)
- 163.9 mm(1)
- 168.75 mm(1)
- 181.451 mm(1)
- 204.5 mm(1)
- 234.25 mm(1)
- 283.05 mm(2)
- 285.05 mm(1)
- 308.451 mm(1)
- 331.5 mm(1)
- 333.5 mm(1)
- 399.35 mm(1)
- 448.151 mm(2)
- 458.5 mm(1)
- 488.25 mm(1)
- 498.951 mm(1)
- 536.7 mm(1)
- 653.35 mm(1)
- 790.7 mm(1)
Point Angle
Point Angle
- 118.0 (54)
- 130.0 (2)
to
Insert Geometry
Shape
Shape
- S-SQUARE 90 (189)
Insert IC Size
Insert IC Size
- 5.551 mm(6)
- 6.351 mm(27)
- 7.75 mm(1)
- 7.926 mm(16)
- 7.95 mm(24)
- 9.525 mm(44)
- 12.701 mm(42)
- 15.726 mm(20)
- 15.875 mm(9)
to
Insert IC Size
Insert IC Size
- 0.219 in(6)
- 0.25 in(27)
- 0.305 in(1)
- 0.312 in(16)
- 0.313 in(24)
- 0.375 in(44)
- 0.5 in(42)
- 0.619 in(20)
- 0.625 in(9)
to
Cutting Edge Length
Cutting Edge Length
- 5.426 mm(6)
- 6.2 mm(10)
- 6.351 mm(17)
- 7.75 mm(1)
- 7.801 mm(15)
- 7.926 mm(25)
- 9.375 mm(20)
- 9.525 mm(24)
- 12.55 mm(14)
- 12.701 mm(37)
- 15.726 mm(20)
to
Cutting Edge Length
Cutting Edge Length
- 0.214 in(6)
- 0.244 in(10)
- 0.25 in(17)
- 0.305 in(1)
- 0.307 in(15)
- 0.312 in(25)
- 0.369 in(20)
- 0.375 in(24)
- 0.494 in(14)
- 0.5 in(37)
- 0.619 in(20)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 20 (33)
- 21 (30)
- 22 (4)
- 31 (12)
- FP (27)
- HP (34)
- MD (37)
- MDT (3)
Cutting Tool Material
Cutting Tool Material
- D P (60)
- H W (253)
Tolerance Class
Tolerance Class
- G (51)
- H (12)
- P (60)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (28)
- HTS SHANK (33)
System Size
System Size
- BT50 (4)
- CV50 (7)
- DV50 (2)
- HSK100A (2)
Back-End Diameter
Back-End Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(7)
- 10.0 mm(7)
- 13.0 mm(9)
- 15.0 mm(3)
- 16.0 mm(5)
- 20.0 mm(3)
- 22.0 mm(6)
- 25.0 mm(3)
- 27.0 mm(6)
- 30.0 mm(3)
- 32.0 mm(13)
- 38.1 mm(2)
- 40.0 mm(10)
- 50.0 mm(37)
- 50.801 mm(19)
- 60.0 mm(3)
- 63.5 mm(3)
- 69.851 mm(13)
- 76.2 mm(3)
- 80.0 mm(2)
- 100.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.197 in(1)
- 0.237 in(1)
- 0.315 in(7)
- 0.394 in(7)
- 0.512 in(9)
- 0.591 in(3)
- 0.63 in(5)
- 0.787 in(3)
- 0.866 in(6)
- 0.984 in(3)
- 1.063 in(6)
- 1.181 in(3)
- 1.26 in(13)
- 1.5 in(2)
- 1.575 in(10)
- 1.969 in(37)
- 2.0 in(19)
- 2.362 in(3)
- 2.5 in(3)
- 2.75 in(13)
- 3.0 in(3)
- 3.15 in(2)
- 3.938 in(2)
to
No filters matching ""
