Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: X-Offset
Drilling: Convex
Shank - Cylindrical Whistle Notch with Drive and Flange
Through Coolant: Radial: Indexable Drilling
Drilling: Blind
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 1543235 |
| ISO Catalog ID | DFT730R2WD50M |
| ANSI Catalog ID | DFT730R2WD50M |
| [D] Adapter / Shank / Bore Diameter | 50 mm |
| [D] Adapter / Shank / Bore Diameter | 1.968 in |
| [D1] Drill Diameter M | 73 mm |
| [D1] Drill Diameter M | 2.874 in |
| [D1MAX] Drill Diameter Maximum | 79 mm |
| [D1MAX] Drill Diameter Maximum | 3.11 in |
| [L1] Insert Gage Length | 205 mm |
| [L1] Insert Gage Length | 8.07 in |
| [L4] Maximum Drilling Depth | 140 mm |
| [L4] Maximum Drilling Depth | 5.511 in |
| [L5] Drill Point Length | 4.018 mm |
| [L5] Drill Point Length | .1582 in |
| Gage Insert | DFT1105. |
DrillingDrilling: Inclined EntryDrilling: Inclined ExitDrilling: X-OffsetDrilling: ConvexShank - Cylindrical Whistle Notch with Drive and FlangeThrough Coolant: Radial: Indexable DrillingDrilling: BlindChain DrillingDrilling: Cross-Hole DrillingDrilling: Half-Cylindrical DrillingDrilling: Corner Drilling 45°Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
| D | LS | CS |
| 32 | 58 | R 1/4 BSP |
| 40 | 68 | R 1/4 BSP |
| 50 | 68 | R 1/4 BSP |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | ||||||
| P | 1 | S | O | MD | KCU25 | 310 | 325 | 360 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU25 | 200 | 215 | 230 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KCU40 | 130 | 135 | 150 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCPK10 | 310 | 325 | 360 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 200 | 215 | 230 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 130 | 135 | 150 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 260 | 285 | 320 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 180 | 195 | 220 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 110 | 120 | 140 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | HP | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU25 | 220 | 250 | 300 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 150 | 180 | 220 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 90 | 110 | 140 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | ||
| I | HP | KC7140 | |||||||||||||
| 5 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | ||
| I | HP | KC7140 | |||||||||||||
| 6 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | ||
| I | HP | KC7140 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | |
| P | 1 | S | O | MD | KCU25 | 310 | 325 | 360 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 |
| 1 | S | I | MD | KC7140 | 310 | 325 | 360 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 1 | U | O | MD | KCU25 | 200 | 215 | 230 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 1 | U | I | MD | KC7140 | 200 | 215 | 230 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 1 | I | O | MD | KCU40 | 130 | 135 | 150 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 1 | I | I | MD | KC7140 | 130 | 135 | 150 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 2 | S | O | HP | KCPK10 | 310 | 325 | 360 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 2 | S | I | HP | KC7140 | 310 | 325 | 360 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 2 | U | O | HP | KCU25 | 200 | 215 | 230 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 2 | U | I | HP | KC7140 | 200 | 215 | 230 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 2 | I | O | HP | KCU40 | 130 | 135 | 150 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 2 | I | I | HP | KC7140 | 130 | 135 | 150 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 3 | S | O | HP | KCPK10 | 260 | 285 | 320 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 3 | S | I | HP | KC7140 | 260 | 285 | 320 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 3 | U | O | HP | KCU25 | 180 | 195 | 220 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 3 | U | I | HP | KC7140 | 180 | 195 | 220 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 3 | I | O | HP | KCU40 | 110 | 120 | 140 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 3 | I | I | HP | KC7140 | 110 | 120 | 140 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 4 | S | O | HP | KCU25 | 220 | 250 | 300 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 4 | S | I | HP | KC7140 | 220 | 250 | 300 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 4 | U | O | HP | KCU40 | 150 | 180 | 220 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 4 | U | I | HP | KC7140 | 150 | 180 | 220 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 4 | I | O | HP | KC7140 | 90 | 110 | 140 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 4 | I | I | HP | KC7140 | 90 | 110 | 140 | mm/r | 0,06–0,10 | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | 0,19–0,31 | 0,19–0,31 | |
| 5 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 5 | S | I | HP | KC7140 | 180 | 200 | 220 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 5 | U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 5 | U | I | HP | KC7140 | 120 | 135 | 150 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 5 | I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 5 | I | I | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 6 | S | O | HP | KCU25 | 180 | 200 | 220 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 6 | S | I | HP | KC7140 | 180 | 200 | 220 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 6 | U | O | HP | KCU40 | 120 | 135 | 150 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 6 | U | I | HP | KC7140 | 120 | 135 | 150 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 6 | I | O | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| 6 | I | I | HP | KC7140 | 70 | 85 | 100 | mm/r | 0,05–0,10 | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | 0,12–0,23 | 0,12–0,23 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | ||||||
| M | 1 | S | O | MD | KC7140 | 150 | 190 | 230 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | MD | KC7140 | 150 | 180 | 210 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 80 | 110 | 140 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | ||
| I | MD | KC7140 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | |
| M | 1 | S | O | MD | KC7140 | 150 | 190 | 230 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 |
| 1 | S | I | MD | KC7140 | 150 | 190 | 230 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 1 | U | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 1 | U | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 1 | I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 1 | I | I | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 2 | S | O | MD | KC7140 | 150 | 180 | 210 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 2 | S | I | MD | KC7140 | 150 | 180 | 210 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 2 | U | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 2 | U | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 2 | I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 2 | I | I | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 3 | S | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 3 | S | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 3 | U | O | MD | KC7140 | 80 | 110 | 140 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 3 | U | I | MD | KC7140 | 80 | 110 | 140 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 3 | I | O | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| 3 | I | I | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,05–0,09 | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | 0,11–0,21 | 0,11–0,21 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | ||||||
| K | 1 | S | O | HP | KCPK10 | 200 | 240 | 300 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 120 | 155 | 200 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KCU40 | 80 | 100 | 125 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | ||
| I | HP | KC7140 | |||||||||||||
| 2 | S | O | HP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 80 | 100 | 120 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 80 | 100 | 120 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | ||
| I | HP | KC7140 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | |
| K | 1 | S | O | HP | KCPK10 | 200 | 240 | 300 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 |
| 1 | S | I | HP | KCU40 | 200 | 240 | 300 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 1 | U | O | HP | KCU25 | 120 | 155 | 200 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 1 | U | I | HP | KCU40 | 120 | 155 | 200 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 1 | I | O | HP | KCU40 | 80 | 100 | 125 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 1 | I | I | HP | KC7140 | 80 | 100 | 125 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 2 | S | O | HP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 2 | S | I | HP | KCU40 | 180 | 220 | 260 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 2 | U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 2 | U | I | HP | KC7140 | 110 | 140 | 170 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 2 | I | O | HP | KCU40 | 80 | 100 | 120 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 2 | I | I | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 3 | S | O | HP | KCPK10 | 180 | 220 | 260 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 3 | S | I | HP | KCU40 | 180 | 220 | 260 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 3 | U | O | HP | KCU25 | 110 | 140 | 170 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 3 | U | I | HP | KC7140 | 110 | 140 | 170 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 3 | I | O | HP | KCU40 | 80 | 100 | 120 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| 3 | I | I | HP | KC7140 | 80 | 100 | 120 | mm/r | 0,07–0,13 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,21–0,39 | 0,21–0,39 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03 16 | DFT05 25 | DFT06 32 | DFT07 41 | DFT09... 49 | DFT11 69 | ||||||
| N | 1 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 300 | 400 | 500 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KMF | |||||||||||||
| 2 | S | O | ST | KD1425 | 375 | 550 | 775 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 175 | 250 | 325 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KMF | |||||||||||||
| 3 | S | O | ST | KD1425 | 350 | 500 | 650 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 150 | 250 | 350 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KMF | |||||||||||||
| 4 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KMF | |||||||||||||
| 5 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KMF | |||||||||||||
| 6 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | ||
| I | HP | KMF | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03 16 | DFT05 25 | DFT06 32 | DFT07 41 | DFT09... 49 | DFT11 69 | |
| N | 1 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
| 1 | S | I | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 1 | U | O | HP | KCU40 | 300 | 400 | 500 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 1 | U | I | HP | KCU40 | 300 | 400 | 500 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 1 | I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 1 | I | I | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | S | O | ST | KD1425 | 375 | 550 | 775 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | S | I | ST | KD1425 | 375 | 550 | 775 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | U | I | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | I | O | HP | KMF | 175 | 250 | 325 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | I | I | HP | KMF | 175 | 250 | 325 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | S | O | ST | KD1425 | 350 | 500 | 650 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | S | I | ST | KD1425 | 350 | 500 | 650 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | U | I | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | I | O | HP | KMF | 150 | 250 | 350 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | I | I | HP | KMF | 150 | 250 | 350 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | S | I | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | U | I | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | I | I | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | S | I | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | U | I | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | I | I | HP | KMF | 200 | 300 | 400 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | ||||||
| S | 1 | S | O | HP | KCU40 | 60 | 70 | 75 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,14 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 40 | 50 | 60 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | ||
| I | MD | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | ||
| I | MD | KC7140 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 16,00–24,00 | DFT05... 25,00–32,00 | DFT06... 33,00–40,00 | DFT07... 41,00–48,00 | DFT09... 49,00–68,00 | DFT011... 69,00–82,00 | |
| S | 1 | S | O | HP | KCU40 | 60 | 70 | 75 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,14 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 |
| 1 | S | I | HP | KCU40 | 60 | 70 | 75 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,14 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 1 | U | O | HP | KCU40 | 40 | 50 | 60 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 1 | U | I | HP | KC7140 | 40 | 50 | 60 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 1 | I | O | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 1 | I | I | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 2 | S | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 2 | S | I | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 2 | U | O | HP | KCU40 | 30 | 40 | 50 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 2 | U | I | HP | KC7140 | 30 | 40 | 50 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 2 | I | O | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 2 | I | I | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,13 | 0,08–0,13 | |
| 3 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 3 | S | I | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 3 | U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 3 | U | I | HP | KC7140 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 3 | I | O | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 3 | I | I | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 4 | S | O | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 4 | S | I | HP | KCU40 | 70 | 80 | 90 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 4 | U | O | HP | KCU40 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 4 | U | I | HP | KC7140 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 4 | I | O | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
| 4 | I | I | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | 0,09–0,15 | 0,09–0,15 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
