BF Inserts
BF inserts are a versatile solution for chamfering and spot-facing operations. They are designed to work on a variety of materials including steel, stainless steel, cast iron, non-ferrous materials, high-temp alloys. The BF inserts are available in different sizes and grades. BF semi-finished blanks for customization, chamfer-only, and spot-face inserts are also available.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (19)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(19)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(19)
- M Stainless Steel (19)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(19)
- K Cast Iron (20)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(20)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(20)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(20)
- N Non-Ferrous Materials (20)
- N1Wrought Aluminum (20)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(20)
- N3High-Silicon Aluminum Alloys Si >12.2%(20)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (20)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (20)
- N6Carbon, Graphite Composites, CFRP (20)
- N7MMC's (20)
- S High-Temp Alloys (19)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (8)
- KC7315 (8)
- KM1 (1)
- KMF (3)
Countersunk Angle
Countersunk Angle
- 30.0 (4)
- 41.0 (2)
- 45.0 (8)
to
Front-End
Cutting Width
Cutting Width
- 0.228 in(1)
- 0.24 in(1)
- 0.386 in(2)
to
Cutting Width
Cutting Width
- 5.801 mm(1)
- 6.101 mm(1)
- 9.8 mm(2)
to
No filters matching ""
