Ceramic Mills • RP

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (27)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
    • N Non-Ferrous Materials (1)
      • N1
        Wrought Aluminum (1)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
      • N7
        MMC's (1)
    • S High-Temp Alloys (35)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(35)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(35)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(35)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
    • H Hardened Materials (6)
      • H1
        Hardened Materials 44-48 HRC(6)
    • C CFRP Materials (1)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (1)
    Applications
    Applications
    • Face MillingFace Milling (22)
    • PocketPocket (23)
    • Pocket MillingPocket Milling (23)
    • Profile MillingProfile Milling (18)
    • RampingRamping (23)
    • Shoulder Ball NoseShoulder Ball Nose (17)
    • Shoulder MillingShoulder Milling (23)
    • Shoulder RoughingShoulder Roughing (6)
    • Slot Ball NoseSlot Ball Nose (19)
    • Slot MillingSlot Milling (23)
    Cutting Diameter
    Cutting Diameter
    • 0.375 in(1)
    • 0.38 in(1)
    • 0.414 in(2)
    • 0.5 in(1)
    • 0.537 in(2)
    • 0.61 in(2)
    • 0.625 in(1)
    • 0.626 in(1)
    • 0.75 in(1)
    • 0.761 in(2)
    • 0.766 in(1)
    • 0.771 in(1)
    • 1.01 in(1)
    • 1.081 in(1)
    • 1.473 in(1)
    • 1.506 in(1)
    • 2.003 in(1)
    • 2.501 in(1)
    • 2.653 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.525 mm(1)
    • 9.65 mm(1)
    • 10.5 mm(2)
    • 12.701 mm(1)
    • 13.65 mm(2)
    • 15.5 mm(2)
    • 15.875 mm(1)
    • 15.9 mm(1)
    • 19.05 mm(1)
    • 19.326 mm(2)
    • 19.451 mm(1)
    • 19.576 mm(1)
    • 25.651 mm(1)
    • 27.451 mm(1)
    • 37.426 mm(1)
    • 38.225 mm(1)
    • 50.875 mm(1)
    • 63.526 mm(1)
    • 67.375 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 15.875 mm(1)
    • 16.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(4)
    • 25.0 mm(2)
    • 25.401 mm(2)
    • 31.75 mm(3)
    • 32.0 mm(2)
    • 38.1 mm(1)
    • 40.0 mm(1)
    • 50.0 mm(1)
    • 50.801 mm(1)
    • 63.5 mm(1)
    • 76.2 mm(1)
    • 80.0 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.625 in(1)
    • 0.63 in(1)
    • 0.75 in(1)
    • 0.787 in(4)
    • 0.984 in(2)
    • 1.0 in(2)
    • 1.25 in(3)
    • 1.26 in(2)
    • 1.5 in(1)
    • 1.575 in(1)
    • 1.969 in(1)
    • 2.0 in(1)
    • 2.5 in(1)
    • 3.0 in(1)
    • 3.15 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.176 mm(5)
    • 4.75 mm(6)
    • 6.325 mm(11)
    • 6.351 mm(1)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.125 in(5)
    • 0.187 in(6)
    • 0.249 in(11)
    • 0.25 in(1)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.022 in(1)
    • 1.024 in(1)
    • 1.181 in(2)
    • 1.192 in(1)
    • 1.22 in(2)
    • 1.25 in(1)
    • 1.379 in(1)
    • 1.5 in(1)
    • 1.536 in(1)
    • 1.556 in(1)
    • 1.61 in(1)
    • 1.772 in(1)
    • 1.929 in(1)
    • 1.969 in(3)
    • 2.0 in(3)
    • 3.11 in(1)
    • 3.5 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 25.925 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(2)
    • 30.276 mm(1)
    • 31.0 mm(2)
    • 31.75 mm(1)
    • 35.0 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(1)
    • 39.526 mm(1)
    • 40.901 mm(1)
    • 45.0 mm(1)
    • 49.0 mm(1)
    • 50.0 mm(3)
    • 50.801 mm(3)
    • 79.0 mm(1)
    • 88.9 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (23)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (4)
    • B-Cutter Retention Screw (1)
    • Screw-On Connection (6)
    • Straight-Cylindrical (12)
    Number of Flutes
    Number of Flutes
    • 2 (4)
    • 3 (13)
    • 4 (4)
    • 5 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(4)
    • 2.0 in(3)
    • 2.116 in(1)
    • 2.244 in(1)
    • 2.465 in(1)
    • 2.736 in(1)
    • 2.95 in(1)
    • 2.953 in(1)
    • 3.2 in(1)
    • 3.228 in(2)
    • 3.781 in(1)
    • 3.801 in(1)
    • 4.0 in(1)
    • 4.331 in(2)
    • 5.5 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(4)
    • 50.801 mm(3)
    • 53.75 mm(1)
    • 57.0 mm(1)
    • 62.6 mm(1)
    • 69.5 mm(1)
    • 74.925 mm(1)
    • 75.0 mm(1)
    • 81.275 mm(1)
    • 82.0 mm(2)
    • 96.0 mm(1)
    • 96.525 mm(1)
    • 101.601 mm(1)
    • 110.0 mm(2)
    • 139.701 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.125 in(7)
    • 0.188 in(11)
    • 0.25 in(17)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 3.176 mm(7)
    • 4.775 mm(11)
    • 6.351 mm(17)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (1)
    • KY1525 (12)
    • KY1540 (14)
    • KY2100 (12)
    • KY4300 (1)
    • KYHS10 (23)
    • KYS30 (28)
    • KYSM10 (23)
    • KYSP30 (26)
    Hand Of Tool
    Hand Of Tool
    • R (23)
    Wiper Insert
    Wiper Insert
    • N (12)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.0 (1)
    • 1.95 (1)
    • 2.0 (2)
    • 2.5 (1)
    • 2.87 (1)
    • 3.0 (2)
    • 4.2 (1)
    • 4.233 (1)
    • 4.25 (2)
    • 8.0 (4)
    • 10.0 (3)
    • 12.0 (1)
    • 13.0 (2)
    • 14.0 (1)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    Front-End
    Neck Diameter
    Neck Diameter
    • 0.551 in(1)
    • 0.669 in(1)
    • 0.709 in(2)
    • 0.906 in(1)
    • 0.921 in(1)
    • 1.196 in(1)
    • 1.22 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 14.0 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(2)
    • 23.0 mm(1)
    • 23.401 mm(1)
    • 30.375 mm(1)
    • 31.0 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • R-ROUND (12)
    Insert IC Size
    Insert IC Size
    • 6.351 mm(2)
    • 9.525 mm(5)
    • 12.701 mm(5)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(2)
    • 0.375 in(5)
    • 0.5 in(5)
    Insert IC Size MintoInsert IC Size Max
    Cutting Tool Material
    Cutting Tool Material
    • C A (1)
    • C N (10)
    • H W (1)
    Tolerance Class
    Tolerance Class
    • G (12)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (12)
    • SCREW-ON (6)
    • SHELL MILL (5)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 18.0 mm(2)
    • 19.05 mm(3)
    • 20.0 mm(2)
    • 21.0 mm(2)
    • 25.0 mm(1)
    • 25.401 mm(2)
    • 27.0 mm(1)
    • 29.0 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.709 in(2)
    • 0.75 in(3)
    • 0.787 in(2)
    • 0.828 in(2)
    • 0.984 in(1)
    • 1.0 in(2)
    • 1.063 in(1)
    • 1.143 in(2)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)