Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (505)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(505)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(505)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(505)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(505)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(505)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(505)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(505)
- M Stainless Steel (505)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(505)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(505)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(505)
- K Cast Iron (385)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(385)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(385)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(385)
- N Non-Ferrous Materials (397)
- N1Wrought Aluminum (397)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(363)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (397)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (363)
- N6Carbon, Graphite Composites, CFRP (363)
- S High-Temp Alloys (497)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(497)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(497)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(497)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(497)
- H Hardened Materials (168)
- H1Hardened Materials 44-48 HRC(168)
- H2Hardened Materials 48-55 HRC(69)
Applications
Applications
ID Thread Turning (397)
OD Thread Turning (527)
Type of Thread
Type of Thread
- 60 (103)
- ACME (83)
- API (13)
- API RD (9)
- BSW (5)
- BUTTRESS (30)
- M (4)
- NPT (12)
- STUB ACME (38)
- UN (154)
- UNJ (98)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (6)
- 2.0 (540)
- 4.0 (3)
to
Corner Radius
Corner Radius
- 0.002 in(1)
- 0.003 in(74)
- 0.004 in(54)
- 0.005 in(21)
- 0.006 in(24)
- 0.007 in(103)
- 0.008 in(16)
- 0.01 in(49)
- 0.011 in(9)
- 0.012 in(3)
- 0.014 in(39)
- 0.016 in(11)
- 0.019 in(6)
- 0.02 in(10)
- 0.023 in(4)
- 0.035 in(4)
to
Corner Radius
Corner Radius
- 0.05 mm(1)
- 0.076 mm(74)
- 0.1 mm(54)
- 0.125 mm(21)
- 0.151 mm(24)
- 0.176 mm(103)
- 0.2 mm(16)
- 0.225 mm(13)
- 0.25 mm(36)
- 0.275 mm(9)
- 0.301 mm(3)
- 0.325 mm(21)
- 0.351 mm(18)
- 0.4 mm(11)
- 0.45 mm(5)
- 0.476 mm(1)
- 0.5 mm(10)
- 0.576 mm(4)
- 0.9 mm(4)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (7)
- K420 (5)
- K68 (27)
- KC5010 (104)
- KC5025 (136)
- KC5410 (1)
- KC720 (2)
- KC730 (78)
- KC850 (43)
- KCU10 (74)
- KCU25 (72)
Countersunk Angle
Countersunk Angle
- 7.0 (12)
- 14.5 (121)
- 27.0 (8)
- 27.5 (5)
- 30.0 (377)
- 33.0 (8)
- 45.0 (18)
to
Front-End
Thread TPI
Thread TPI
- 2.0 (7)
- 2.5 (2)
- 3.0 (4)
- 4.0 (29)
- 5.0 (22)
- 6.0 (28)
- 7.0 (1)
- 8.0 (50)
- 9.0 (1)
- 10.0 (19)
- 11.0 (5)
- 11.5 (5)
- 12.0 (35)
- 13.0 (2)
- 14.0 (12)
- 16.0 (49)
- 18.0 (13)
- 20.0 (22)
- 24.0 (18)
- 27.0 (1)
- 28.0 (9)
- 32.0 (9)
to
Thread Pitch
Thread Pitch
- 1.5 mm(3)
- 2.0 mm(7)
- 6.25 mm(3)
to
Thread Pitch
Thread Pitch
- 0.06 in(3)
- 0.079 in(7)
- 0.246 in(3)
to
Insert Geometry
Insert IC Size
Insert IC Size
- 4.75 mm(3)
to
Insert IC Size
Insert IC Size
- 0.187 in(3)
to
Insert Seat Size
Insert Seat Size
- 1 (6)
- 2 (78)
- 3 (379)
- 4 (65)
- 4U (3)
- 6 (14)
- 8 (4)
No filters matching ""
