Inserts 5720
5720 high-speed geometry inserts offer a high positive geometry for machining aluminum alloys, copper, and brass. These precision ground insets are pressed and have a polished top rake face which helps reduce a built-up edge and provides a better surface finish. The 5270 shoulder milling inserts can be used for thin-walled components in roughing applications and in unstable conditions. They are great for pocketing, slotting, and profiling.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- K Cast Iron (15)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
- N Non-Ferrous Materials (15)
- N1Wrought Aluminum (15)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(15)
- N3High-Silicon Aluminum Alloys Si >12.2%(15)
Corner Radius
Corner Radius
- 0.012 in(1)
- 0.016 in(1)
- 0.031 in(1)
- 0.049 in(1)
- 0.066 in(1)
- 0.083 in(1)
- 0.103 in(2)
- 0.122 in(2)
- 0.13 in(1)
- 0.161 in(2)
- 0.206 in(1)
- 0.244 in(1)
to
Corner Radius
Corner Radius
- 0.301 mm(1)
- 0.4 mm(1)
- 0.8 mm(1)
- 1.25 mm(1)
- 1.675 mm(1)
- 2.1 mm(1)
- 2.6 mm(2)
- 3.1 mm(2)
- 3.301 mm(1)
- 4.101 mm(2)
- 5.2 mm(1)
- 6.2 mm(1)
to
Insert Geometry
Cutting Edge Length
Cutting Edge Length
- 16.25 mm(2)
- 16.375 mm(7)
- 16.401 mm(5)
- 16.45 mm(1)
to
Cutting Edge Length
Cutting Edge Length
- 0.64 in(2)
- 0.645 in(7)
- 0.646 in(5)
- 0.648 in(1)
to
No filters matching ""
