ようこそ
設定をご確認ください
設定の更新
提案製品
Product Family suggestions
この限定キャンペーンのご利用はお早めに！ プロモーション製品
- 製品
- /
- 金属加工工具
- /
- ミル
- /
- スローアウェイミーリング工具
- /
- High-Feed Series
- /
- 7792高フィード • Stellram
- /
- 7792 High-Feed • IC 06 • Stellram
7792 High-Feed • IC 06 • Stellram
フィルタを選択
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
- P Steel (33)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(29)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(29)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(29)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(29)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(31)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(30)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(30)
- M Stainless Steel (30)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(30)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(30)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(30)
- K Cast Iron (26)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(26)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(26)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(26)
- N Non-Ferrous Materials (23)
- N1Wrought Aluminum (23)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
- N3High-Silicon Aluminum Alloys Si >12.2%(23)
- S High-Temp Alloys (30)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(29)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(29)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(29)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(30)
- H Hardened Materials (26)
- H1Hardened Materials 44-48 HRC(26)
- H2Hardened Materials 48-55 HRC(22)
第1選択を選択
- DE (11)
- GB (11)
- SG (2)
Applications
Applications
Face Milling (21)
Pocket (21)
Pocket Helical (21)
Pocket Milling (21)
Pocket Plunge Milling (21)
Profile Milling (21)
Ramping (21)
Slot Milling (19)
Slot Side (19)
=
Cutting Diameter
Cutting Diameter
- 0.27 in(1)
- 0.281 in(2)
- 0.299 in(1)
- 0.38 in(2)
- 0.39 in(1)
- 0.427 in(2)
- 0.457 in(1)
- 0.627 in(1)
- 0.629 in(1)
- 0.63 in(3)
- 0.654 in(1)
- 0.88 in(2)
- 0.929 in(2)
- 1.066 in(1)
Cutting Diameter Min値を入力toCutting Diameter MaxCutting Diameter
=
Cutting Diameter
Cutting Diameter
- 6.851 mm(1)
- 7.15 mm(2)
- 7.601 mm(1)
- 9.65 mm(2)
- 9.9 mm(1)
- 10.851 mm(2)
- 11.601 mm(1)
- 15.925 mm(1)
- 15.976 mm(1)
- 16.0 mm(3)
- 16.6 mm(1)
- 22.35 mm(2)
- 23.6 mm(2)
- 27.076 mm(1)
Cutting Diameter Min値を入力toCutting Diameter MaxCutting Diameter
=
Maximum Cutting Diameter
Maximum Cutting Diameter
- 15.875 mm(2)
- 16.0 mm(2)
- 19.05 mm(3)
- 20.0 mm(3)
- 25.0 mm(2)
- 25.026 mm(1)
- 25.401 mm(3)
- 31.75 mm(2)
- 32.0 mm(2)
- 35.0 mm(1)
Maximum Cutting Diameter Min値を入力toMaximum Cutting Diameter MaxMaximum Cutting Diameter
=
Maximum Cutting Diameter
Maximum Cutting Diameter
- 0.625 in(2)
- 0.63 in(2)
- 0.75 in(3)
- 0.787 in(3)
- 0.984 in(2)
- 0.985 in(1)
- 1.0 in(3)
- 1.25 in(2)
- 1.26 in(2)
- 1.379 in(1)
Maximum Cutting Diameter Min値を入力toMaximum Cutting Diameter MaxMaximum Cutting Diameter
=
Cutting Length
Cutting Length
- 0.9 mm(21)
Cutting Length Min値を入力toCutting Length MaxCutting Length
=
Cutting Length
Cutting Length
- 0.035 in(21)
Cutting Length Min値を入力toCutting Length MaxCutting Length
=
Reach
Reach
- 0.984 in(3)
- 1.0 in(1)
- 1.26 in(2)
- 1.379 in(8)
- 1.575 in(4)
- 1.693 in(3)
Reach Min値を入力toReach MaxReach
=
Reach
Reach
- 25.0 mm(3)
- 25.401 mm(1)
- 32.0 mm(2)
- 35.0 mm(8)
- 40.0 mm(4)
- 43.0 mm(3)
Reach Min値を入力toReach MaxReach
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 10.0 (15)
- 12.0 (2)
- 13.0 (1)
- 15.0 (3)
Tool Cutting Edge Angle Min値を入力toTool Cutting Edge Angle MaxTool Cutting Edge Angle
Connection Style
Connection Style
- Screw-On Connection (13)
- Straight-Cylindrical (8)
Number of Flutes
Number of Flutes
- 2 (6)
- 3 (6)
- 4 (4)
- 5 (4)
- 6 (1)
Internal Coolant Capability
Internal Coolant Capability
=
Over All Length [L]
Over All Length [L]
- 1.693 in(1)
- 1.709 in(1)
- 2.126 in(3)
- 2.165 in(1)
- 2.244 in(4)
- 2.598 in(2)
- 2.657 in(1)
- 7.402 in(2)
- 7.875 in(1)
- 8.094 in(1)
- 8.268 in(1)
- 8.345 in(1)
- 9.762 in(1)
- 9.843 in(1)
Over All Length [L] Min値を入力toOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 43.0 mm(1)
- 43.401 mm(1)
- 54.0 mm(3)
- 55.0 mm(1)
- 57.0 mm(4)
- 66.0 mm(2)
- 67.5 mm(1)
- 188.0 mm(2)
- 200.0 mm(1)
- 205.576 mm(1)
- 210.0 mm(1)
- 211.951 mm(1)
- 247.951 mm(1)
- 250.0 mm(1)
Over All Length [L] Min値を入力toOver All Length [L] MaxOver All Length [L]
cornerConfiguration
≈
Corner Radius
Corner Radius
- 0.031 in(28)
- 0.039 in(26)
Corner Radius Min値を入力toCorner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 0.8 mm(28)
- 1.0 mm(26)
Corner Radius Min値を入力toCorner Radius MaxCorner Radius
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC510M (22)
- KC522M (23)
- KCKP10 (22)
- KCPK30 (22)
- KCPM40 (23)
- KCSM40 (23)
- SP6519 (22)
- X400 (22)
- X500 (22)
Hand Of Tool
Hand Of Tool
- R (21)
Wiper Insert
Wiper Insert
- N (12)
=
Maximum Ramp Angle
Maximum Ramp Angle
- 1.29 (1)
- 1.39 (1)
- 1.4 (1)
- 1.43 (2)
- 2.11 (3)
- 2.23 (2)
- 2.84 (1)
- 3.42 (3)
- 3.86 (3)
- 5.94 (2)
- 6.06 (1)
- 6.09 (1)
Maximum Ramp Angle Min値を入力toMaximum Ramp Angle MaxMaximum Ramp Angle
frontEnd
=
Neck Diameter
Neck Diameter
- 0.542 in(1)
- 0.543 in(1)
- 0.677 in(2)
- 0.906 in(1)
- 0.917 in(1)
- 1.167 in(1)
- 1.177 in(1)
Neck Diameter Min値を入力toNeck Diameter MaxNeck Diameter
=
Neck Diameter
Neck Diameter
- 13.775 mm(1)
- 13.8 mm(1)
- 17.2 mm(2)
- 23.0 mm(1)
- 23.3 mm(1)
- 29.651 mm(1)
- 29.901 mm(1)
Neck Diameter Min値を入力toNeck Diameter MaxNeck Diameter
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
- S-SQUARE 90 (12)
=
Insert IC Size
Insert IC Size
- 6.825 mm(3)
- 7.0 mm(9)
Insert IC Size Min値を入力toInsert IC Size MaxInsert IC Size
=
Insert IC Size
Insert IC Size
- 0.269 in(3)
- 0.276 in(9)
Insert IC Size Min値を入力toInsert IC Size MaxInsert IC Size
=
Cutting Edge Length
Cutting Edge Length
- 6.825 mm(3)
- 7.0 mm(9)
Cutting Edge Length Min値を入力toCutting Edge Length MaxCutting Edge Length
=
Cutting Edge Length
Cutting Edge Length
- 0.269 in(3)
- 0.276 in(9)
Cutting Edge Length Min値を入力toCutting Edge Length MaxCutting Edge Length
Chip Breaker CBMD
Chip Breaker CBMD
- D (5)
- D41 (4)
- M41 (3)
Cutting Tool Material
Cutting Tool Material
- H W (12)
Tolerance Class
Tolerance Class
- E (3)
- L (3)
- P (6)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (8)
- SCREW-ON (13)
=
Back-End Diameter
Back-End Diameter
- 13.0 mm(2)
- 15.875 mm(1)
- 16.0 mm(1)
- 18.0 mm(4)
- 19.05 mm(1)
- 20.0 mm(1)
- 21.0 mm(4)
- 25.0 mm(1)
- 25.401 mm(1)
- 29.0 mm(3)
- 31.75 mm(1)
- 32.0 mm(1)
Back-End Diameter Min値を入力toBack-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.512 in(2)
- 0.625 in(1)
- 0.63 in(1)
- 0.709 in(4)
- 0.75 in(1)
- 0.787 in(1)
- 0.828 in(4)
- 0.984 in(1)
- 1.0 in(1)
- 1.143 in(3)
- 1.25 in(1)
- 1.26 in(1)
Back-End Diameter Min値を入力toBack-End Diameter MaxBack-End Diameter
No filters matching ""
