ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

ケナメタルにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

Cutter Bodies

フィルタを選択
フィルタ
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (27)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
    • M Stainless Steel (27)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
    • K Cast Iron (27)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
    • S High-Temp Alloys (27)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
    • H Hardened Materials (27)
      • H1
        Hardened Materials 44-48 HRC(27)
    Applications
    Applications
    • Pipe ThreadPipe Thread (27)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (27)
    • Shoulder RoughingShoulder Roughing (27)
    • Shoulder Square EndShoulder Square End (27)
    • Thread MillingThread Milling (27)
    • ThreadingThreading (27)
    Cutting Diameter
    Cutting Diameter
    • 0.579 in(1)
    • 0.58 in(1)
    • 0.581 in(1)
    • 0.591 in(1)
    • 0.677 in(1)
    • 0.681 in(1)
    • 0.787 in(2)
    • 0.811 in(2)
    • 0.906 in(1)
    • 0.909 in(2)
    • 0.917 in(1)
    • 1.02 in(2)
    • 1.024 in(2)
    • 1.22 in(4)
    • 1.441 in(2)
    • 1.651 in(1)
    • 1.69 in(1)
    • 2.09 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 14.701 mm(1)
    • 14.726 mm(1)
    • 14.75 mm(1)
    • 15.0 mm(1)
    • 17.2 mm(1)
    • 17.3 mm(1)
    • 20.0 mm(2)
    • 20.6 mm(2)
    • 23.0 mm(1)
    • 23.1 mm(2)
    • 23.3 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(2)
    • 31.0 mm(4)
    • 36.6 mm(2)
    • 41.901 mm(1)
    • 42.926 mm(1)
    • 53.075 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Reach
    Reach
    • 1.579 in(2)
    • 1.78 in(1)
    • 1.788 in(1)
    • 2.559 in(1)
    • 2.561 in(1)
    • 2.567 in(1)
    • 2.575 in(2)
    • 2.693 in(1)
    • 2.961 in(1)
    • 2.969 in(1)
    • 3.209 in(1)
    • 3.358 in(2)
    • 3.362 in(2)
    • 3.598 in(1)
    • 3.95 in(1)
    • 3.954 in(1)
    • 4.059 in(1)
    • 4.346 in(1)
    • 4.358 in(1)
    • 4.728 in(1)
    • 4.74 in(1)
    • 5.039 in(1)
    • 5.428 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 40.1 mm(2)
    • 45.2 mm(1)
    • 45.401 mm(1)
    • 65.0 mm(1)
    • 65.05 mm(1)
    • 65.2 mm(1)
    • 65.4 mm(2)
    • 68.4 mm(1)
    • 75.2 mm(1)
    • 75.4 mm(1)
    • 81.5 mm(1)
    • 85.301 mm(2)
    • 85.4 mm(2)
    • 91.4 mm(1)
    • 100.301 mm(1)
    • 100.4 mm(1)
    • 103.101 mm(1)
    • 110.4 mm(1)
    • 110.7 mm(1)
    • 120.101 mm(1)
    • 120.4 mm(1)
    • 128.0 mm(1)
    • 137.875 mm(1)
    Reach MintoReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (2)
    • Straight-Cylindrical (13)
    • Weldon (12)
    Number of Flutes
    Number of Flutes
    • 1 (4)
    • 2 (10)
    • 3 (6)
    • 4 (6)
    • 5 (1)
    Over All Length [L]
    Over All Length [L]
    • 1.579 in(2)
    • 3.74 in(1)
    • 3.761 in(1)
    • 4.72 in(1)
    • 4.724 in(1)
    • 4.843 in(1)
    • 4.921 in(1)
    • 5.197 in(1)
    • 5.299 in(1)
    • 5.315 in(2)
    • 5.351 in(1)
    • 5.382 in(1)
    • 5.598 in(1)
    • 5.787 in(1)
    • 5.791 in(1)
    • 6.37 in(1)
    • 6.449 in(1)
    • 6.457 in(1)
    • 6.535 in(1)
    • 7.202 in(1)
    • 7.323 in(1)
    • 7.702 in(1)
    • 7.718 in(1)
    • 7.819 in(1)
    • 8.35 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.1 mm(2)
    • 95.0 mm(1)
    • 95.5 mm(1)
    • 119.9 mm(1)
    • 120.0 mm(1)
    • 123.0 mm(1)
    • 125.0 mm(1)
    • 132.0 mm(1)
    • 134.6 mm(1)
    • 135.0 mm(2)
    • 135.9 mm(1)
    • 136.701 mm(1)
    • 142.201 mm(1)
    • 147.0 mm(1)
    • 147.1 mm(1)
    • 161.8 mm(1)
    • 163.8 mm(1)
    • 164.0 mm(1)
    • 166.0 mm(1)
    • 182.9 mm(1)
    • 186.0 mm(1)
    • 195.601 mm(1)
    • 196.0 mm(1)
    • 198.601 mm(1)
    • 212.101 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(25)
    • 0.003 in(25)
    • 0.004 in(22)
    • 0.006 in(25)
    • 0.01 in(25)
    • 0.011 in(5)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(25)
    • 0.076 mm(25)
    • 0.1 mm(22)
    • 0.151 mm(25)
    • 0.25 mm(25)
    • 0.275 mm(5)
    Corner Radius MintoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (27)
    • KC635M (27)
    frontEnd
    Thread TPI
    Thread TPI
    • 6.0 (5)
    • 10.0 (27)
    • 11.0 (25)
    • 12.0 (2)
    • 16.0 (25)
    • 48.0 (20)
    Thread TPI MintoThread TPI Max
    Thread Pitch
    Thread Pitch
    • 1.5 mm(20)
    • 2.0 mm(25)
    • 2.5 mm(2)
    • 3.5 mm(5)
    • 4.0 mm(20)
    • 6.0 mm(5)
    Thread Pitch MintoThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.06 in(20)
    • 0.079 in(25)
    • 0.098 in(2)
    • 0.138 in(5)
    • 0.157 in(20)
    • 0.237 in(5)
    Thread Pitch MintoThread Pitch Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (25)
    • SHELL MILL (2)
    Back-End Diameter
    Back-End Diameter
    • 10.701 mm(1)
    • 11.101 mm(1)
    • 12.701 mm(1)
    • 14.0 mm(1)
    • 14.3 mm(1)
    • 15.9 mm(3)
    • 16.0 mm(2)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 25.0 mm(4)
    • 25.401 mm(5)
    • 31.8 mm(2)
    • 32.0 mm(1)
    • 38.1 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.421 in(1)
    • 0.437 in(1)
    • 0.5 in(1)
    • 0.551 in(1)
    • 0.564 in(1)
    • 0.626 in(3)
    • 0.63 in(2)
    • 0.709 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.984 in(4)
    • 1.0 in(5)
    • 1.252 in(2)
    • 1.26 in(1)
    • 1.5 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    KTMD Uスタイル カッター1/4インチIC 鋼ストレートシャンク
    (3)

    KTMD Uスタイル カッター1/4インチIC 鋼ストレートシャンク

    KTMD U Style Cutter 3/8" IC Shell Mill
    (2)

    KTMD U Style Cutter 3/8" IC Shell Mill

    KTMD U Style Cutter 3/8" iC Steel Cylindrical Shank
    (1)

    KTMD U Style Cutter 3/8" iC Steel Cylindrical Shank

    KTMD Uスタイル カッター1/4インチIC 超硬ストレートシャンク
    (3)

    KTMD Uスタイル カッター1/4インチIC 超硬ストレートシャンク

    KTMD U Style Cutter 1/4" IC Steel Cylindrical Shank
    (3)

    KTMD U Style Cutter 1/4" IC Steel Cylindrical Shank

    KTMD Uスタイル カッター1/4インチIC Weldon
    (5)

    KTMD Uスタイル カッター1/4インチIC Weldon

    KTMD U Style Cutter 1/4" IC Weldon
    (5)

    KTMD U Style Cutter 1/4" IC Weldon

    KTMD U Style Cutter 3/8" IC Weldon
    (2)

    KTMD U Style Cutter 3/8" IC Weldon

    KTMD U Style Cutter 1/4" IC Carbide Cylindrical Shank
    (3)

    KTMD U Style Cutter 1/4" IC Carbide Cylindrical Shank

    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    有効な名前を入力してください
    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO製品型番 材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk