ポジティブプロファイル加工
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (5)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(5)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(5)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(5)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(5)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(5)
- M Stainless Steel (5)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(5)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(5)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(5)
- K Cast Iron (5)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(5)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(5)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(5)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
- S High-Temp Alloys (3)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- C CFRP Materials (3)
- C1CFRP, CFRP / CFRP (3)
Applications
Applications
Facing (6)
Multiple Direction Cutting (6)
Profiling (6)
Turning (6)
Cutting Condition
Cutting Condition
- Lightly Interrupted Cut (5)
- Smooth Cut (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (5)
to
Over All Length [L]
Over All Length [L]
- 6.0 in(5)
- 8.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 152.4 mm(5)
- 203.201 mm(1)
to
Corner Radius
Corner Radius
- 0.25 in(3)
- 0.375 in(1)
- 0.5 in(1)
to
Corner Radius
Corner Radius
- 6.351 mm(3)
- 9.525 mm(1)
- 12.701 mm(1)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (1)
- K68 (1)
- KC5010 (3)
- KC8050 (5)
- KC850 (5)
- KC9105 (1)
- KC9125 (1)
- KC9240 (5)
- KC9240NEW (5)
- KC950 (2)
- KCP10B (1)
- KCP25C (5)
- KCS10 (3)
- KCU10 (3)
- KCU10B (3)
- KT125 (1)
Wiper Insert
Wiper Insert
- N (5)
F Dimension
F Dimension
- 19.05 mm(1)
- 22.225 mm(1)
- 25.401 mm(2)
- 28.576 mm(2)
to
F Dimension
F Dimension
- 0.75 in(1)
- 0.875 in(1)
- 1.0 in(2)
- 1.125 in(2)
to
Cutting Direction
Cutting Direction
- B (3)
- E (3)
frontEnd
Maximum Cutting Depth
Maximum Cutting Depth
- 1.863 in(1)
- 1.875 in(2)
- 2.323 in(1)
- 2.364 in(1)
- 2.374 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 47.325 mm(1)
- 47.625 mm(2)
- 59.0 mm(1)
- 60.051 mm(1)
- 60.301 mm(1)
to
insertGeometry
Cutting Tool Material
Cutting Tool Material
- H T (1)
- H W (5)
backEnd
Shank Height
Shank Height
- 1.0 in(1)
- 1.25 in(3)
- 1.5 in(2)
to
Shank Height
Shank Height
- 25.401 mm(1)
- 31.75 mm(3)
- 38.1 mm(2)
to
Shank Width
Shank Width
- 1.0 in(1)
- 1.25 in(3)
- 1.5 in(2)
to
Shank Width
Shank Width
- 25.401 mm(1)
- 31.75 mm(3)
- 38.1 mm(2)
to
No filters matching ""
