Name: 5720 Series • End Mill • Cylindrical Shank • Inch
SKU: 5672718
Rating: 0 (0 reviews)

送り量

5720 Series • Recommended Starting Feeds [mm/th]
インサートブレーカ形状	径方向の切込み量（ae）の割合に対する1刃あたりの推奨送り量の開始値（Fz）
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

5720 Series • Recommended Starting Feeds [IPT]
インサートブレーカ形状	径方向の切込み量（ae）の割合に対する1刃あたりの推奨送り量の開始値（Fz）
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

続きを読むView Less

速度

5720 Series • Recommended Starting Speed [m/min]
材種		GH1
切り屑厚さ（hex）（mm）		最小		最大
被削材グループ		最大	スタート	最小
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	215	140	120
	2	195	120	100
	3	180	105	80
N	1	795	695	600
	2	615	520	425
	3	615	520	425
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

5720 Series • Recommended Starting Speed [SFM]
材種		GH1
Chip Thickness hex Inch		最小		最大
被削材グループ		最大	スタート	最小
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	705	460	395
	2	640	395	330
	3	590	345	260
N	1	2610	2280	1970
	2	2020	1705	1395
	3	2020	1705	1395
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

続きを読むView Less

インサート選択

5720 Series • Insert Selection Guide
被削材グループ	軽切削加工		汎用		重切削加工
–	(軽いブレーカー)		–		(強いブレーカー)
–	耐磨耗性				靭性
–	ブレーカ形状	材種	ブレーカ形状	材種	ブレーカ形状	材種
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	–	–	–	–	–	–
M1–M2	–	–	–	–	–	–
M3	–	–	–	–	–	–
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	.F..721	GH1	.F..721	GH1	.F..721	GH1
N3	.F..721	GH1	.F..721	GH1	.F..721	GH1
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

続きを読むView Less

You are about to leave the Solution building process.

Are you sure you want to leave?

製品番号	5672718
ISO カタログ ID	C5720VZ16CA1.0Z2R2.75
ANSIカタログID	C5720VZ16CA1.0Z02R2.7
[D1] Effective Cutting Diameter	25.4 mm
[D1] Effective Cutting Diameter	1 in
[D] Adapter / Shank / Bore Diameter	25.4 mm
[D] Adapter / Shank / Bore Diameter	1 in
[L] Overall Length	127.762 mm
[L] Overall Length	5.03 in
[L2] Head Length	69.85 mm
[L2] Head Length	2.75 in
[AP1MAX] 1st Maximum Cutting Depth	16 mm
[AP1MAX] 1st Maximum Cutting Depth	0.63 in
Number of Inserts	2
Maximum Ramping Angle	14.7
Weight Pounds	0.87
Max RPM	50000

*に類似する製品:

5720 Series • End Mill • Cylindrical Shank • Inch