定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
DFT 4xD Flanged Shk Inch RH Holemaking - 1522134 - Kennametal
*に類似する製品:
DFT Flanged Shank • Right Hand • 4 x D
Drill Fix™ DFT™ Bodies
製品番号1522134
ISO カタログ IDDFT0969R4SSF100ANSIカタログIDDFT0969R4SSF100
定価
$656.68/個
割引
価格
/個
在庫ありこの製品は既に廃盤になっております長納期品
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
- P Steel
- M Stainless Steel
- K Cast Iron
- N Non-Ferrous
- S High-Temp Alloys
- H Hardened Materials
ドリル加工
穴あけ加工：傾斜した入口
穴あけ加工：傾斜した出口
穴あけ加工：Xオフセット
穴あけ加工：凸面
シャンク — フラット部およびフランジ付きストレート
スルークーラント：径方向：スローアウェイドリル
穴あけ加工：止まり穴
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
メートルインチ
| 製品番号 | 1522134 |
| ISO カタログ ID | DFT0969R4SSF100 |
| ANSIカタログID | DFT0969R4SSF100 |
| [D] Adapter / Shank / Bore Diameter | 25.4 mm |
| [D] Adapter / Shank / Bore Diameter | 1 in |
| [D1] Drill Diameter M | 24.613 mm |
| [D1] Drill Diameter M | .969 in |
| [D1MAX] Drill Diameter Maximum | 25.883 mm |
| [D1MAX] Drill Diameter Maximum | 1.019 in |
| [L1] Insert Gage Length | 136.525 mm |
| [L1] Insert Gage Length | 5.375 in |
| [L4] Maximum Drilling Depth | 98.425 mm |
| [L4] Maximum Drilling Depth | 3.875 in |
| [L5] Drill Point Length | 0.988 mm |
| [L5] Drill Point Length | .0389 in |
| [LS] Shank Length | 76.2 mm |
| [LS] Shank Length | 3 in |
| Gage Insert | DFT0303. |
ワーク材料
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous
- High-Temp Alloys
- Hardened Materials
使用法と用途
特徴と利点
- Drill Fix DFT is one of the most versatile and reliable tool solutions covering a large diameter range and offers portfolio of insert geometries and grades.
- Trigon-shaped inserts are used for both inboard and outboard inserts and offer the highest centering capabilities and three cutting edges each.
- Drill shipped with insert screws, side pipe plug, and Torx wrench.
送りと速度を計算するソリューションを作成する
ソリューションを作成したら、送りと速度アイコンを選択するだけで、システムが推奨事項を提供します。マシンと仕様を追加して情報をカスタマイズしたり、スライダーを使用して調整することもできます。
警告
警告 • Drill Fix DFR
| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
続きを読むView Less
Dimension
 | ||||
| D | LS | CF | CS | pipe plug |
| 0.750 | 2.00 | 1/8-27 NPT | R 1/8-27 NPT | 1025612 |
| 1.000 | 3.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.250 | 3.25 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.500 | 3.75 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 2.000 | 4.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
続きを読むView Less
アプリケーションデータ
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| P | 1 | S | O | MD | KCU25 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCPK10 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU25 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | ||
| I | HP | KC7140 | |||||||||||||
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| P | 1 | S | O | MD | KCU25 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 |
| 1 | S | I | MD | KC7140 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | U | O | MD | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | U | I | MD | KC7140 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | I | O | MD | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | I | I | MD | KC7140 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | S | O | HP | KCPK10 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | S | I | HP | KC7140 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | U | O | HP | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | U | I | HP | KC7140 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | I | O | HP | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | I | I | HP | KC7140 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | S | O | HP | KCPK10 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | S | I | HP | KC7140 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | U | O | HP | KCU25 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | U | I | HP | KC7140 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | I | O | HP | KCU40 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | I | I | HP | KC7140 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | S | O | HP | KCU25 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | S | I | HP | KC7140 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | U | O | HP | KCU40 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | U | I | HP | KC7140 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | I | O | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | I | I | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | S | I | HP | KC7140 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | U | I | HP | KC7140 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | I | I | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | S | I | HP | KC7140 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | U | I | HP | KC7140 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | I | I | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| M | 1 | S | O | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| M | 1 | S | O | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 |
| 1 | S | I | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | U | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | I | I | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | S | O | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | S | I | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | U | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | I | I | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | S | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | S | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | U | O | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | U | I | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | I | O | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | I | I | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| K | 1 | S | O | HP | KCPK10 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| 2 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| K | 1 | S | O | HP | KCPK10 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 |
| 1 | S | I | HP | KCU40 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | U | O | HP | KCU25 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | U | I | HP | KC7140 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | I | O | HP | KCU40 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | I | I | HP | KC7140 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | S | I | HP | KCU40 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | U | I | HP | KC7140 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | I | I | HP | KC7140 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | S | I | HP | KCU40 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | U | I | HP | KC7140 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | I | I | HP | KC7140 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| N | 1 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 2 | S | O | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 3 | S | O | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 4 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 5 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| N | 1 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
| 1 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | U | O | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | U | I | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | I | I | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | S | O | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | S | I | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | I | O | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | I | I | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | S | O | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | S | I | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | I | O | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | I | I | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | I | I | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | I | I | HP | KMF | 656 | 984 | 1312 | ipr | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| S | 1 | S | O | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | MD | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | MD | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| S | 1 | S | O | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 |
| 1 | S | I | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | U | O | HP | KCU40 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | U | I | HP | KC7140 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | I | I | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | S | O | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | S | I | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | U | O | HP | KCU40 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | U | I | HP | KC7140 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | I | I | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 3 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | S | I | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | U | I | HP | KC7140 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | I | I | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | S | I | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | U | I | HP | KC7140 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | I | I | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
続きを読むView Less
I have read and accepted the Terms & Conditions of use
ソリューションを作成して、ツールに最適な互換性のある部品を見つけます。
製品名
製品番号
ISO カタログ ID
ANSIカタログID
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
ソリューションを作成して、ツールに最適な互換性のある部品を見つけます。
製品名
製品番号
ISO カタログ ID
ANSIカタログID
材質
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
製品名
製品番号
ISO カタログ ID
ANSIカタログID
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品
定価
/個
割引
価格
/個
販売包装単位 0最小包装サイズに合わせて調整されています。
最小数量: 0包装サイズ要件に合わせて調整されています。
在庫ありこの製品は既に廃盤になっております長納期品