定価:
/包装. (包装単位
)
/各
割引:
%
価格::
This item is not available
数量
販売包装単位 0
申し訳ありません。それほど多くの在庫はありません。
申し訳ありません。それほど多くの在庫はありません。今日現在の在庫数量:
最小包装サイズに合わせて調整されています。
販売包装単位 0
Downloaded file will be available after import in the SolidCAM tool library.
SAP Material Number | 6953291 |
ISO Catalog Number | H1TE4SE1250R188DL |
ANSI Catalog Number | H1TE4SE1250R188DL |
Grade | KCPM15 |
Adapter Style Machine Side | DUO-LOCK |
[D] Adapter / Shank / Bore Diameter | 31.75 mm |
[D] Adapter / Shank / Bore Diameter | 1.25 in |
[L1] Gage Length | 71.5 mm |
[L1] Gage Length | 2.815 in |
[CSMS] System Size Machine Side | DL32 |
[WF] Width of Flat | 28 mm |
[WF] Width of Flat | 1.102 in |
[Z] Number of Flutes | 4 |
[D1] Effective Cutting Diameter | 31.75 mm |
[D1] Effective Cutting Diameter | 1.25 in |
[AP1MAX] 1st Maximum Cutting Depth | 47.625 mm |
[AP1MAX] 1st Maximum Cutting Depth | 1.875 in |
Material
|
Max Depth | Recommended feed per tooth (fz = IPT) for Helical Interpolation and Ramping
|
||||||||||
KCPM15–KCSM15 | ||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||
Min | Start | Max | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||
P | 0 | 1 x D | 410 | 490 | 580 | IPT | 0.0022 | 0.0026 | 0.003 | 0.0034 | 0.0037 | 0.0041 |
1 | 1 x D | 410 | 490 | 580 | IPT | 0.0022 | 0.0026 | 0.003 | 0.0034 | 0.0037 | 0.0041 | |
2 | 1 x D | 410 | 490 | 580 | IPT | 0.0022 | 0.0026 | 0.003 | 0.0034 | 0.0037 | 0.0041 | |
3 | 1 x D | 360 | 430 | 490 | IPT | 0.0019 | 0.0021 | 0.0026 | 0.0031 | 0.0035 | 0.0037 | |
4 | 1 x D | 250 | 360 | 460 | IPT | 0.0016 | 0.0019 | 0.0023 | 0.0027 | 0.003 | 0.0032 | |
5 | 0.75 x D | 160 | 230 | 300 | IPT | 0.0015 | 0.0017 | 0.0021 | 0.0024 | 0.0028 | 0.003 | |
6 | 0.75 x D | 130 | 180 | 230 | IPT | 0.0012 | 0.0014 | 0.0017 | 0.002 | 0.0022 | 0.0024 | |
M | 1 | 0.75 x D | 250 | 300 | 330 | IPT | 0.0019 | 0.0021 | 0.0026 | 0.0031 | 0.0035 | 0.0037 |
2 | 0.75 x D | 150 | 180 | 220 | IPT | 0.0015 | 0.0017 | 0.0021 | 0.0024 | 0.028 | 0.003 | |
3 | 0,5 x D | 130 | 160 | 210 | IPT | 0.0012 | 0.0014 | 0.0017 | 0.002 | 0.0022 | 0.0024 | |
K | 1 | 1 x D | 360 | 400 | 460 | IPT | 0.0022 | 0.0026 | 0.003 | 0.0034 | 0.0037 | 0.0041 |
2 | 1 x D | 330 | 380 | 430 | IPT | 0.0019 | 0.0021 | 0.0026 | 0.0031 | 0.0035 | 0.0037 | |
3 | 0.75 x D | 300 | 340 | 390 | IPT | 0.0015 | 0.0017 | 0.0021 | 0.0024 | 0.028 | 0.003 | |
S | 1 | 0,5 x D | 130 | 190 | 260 | IPT | 0.0019 | 0.0021 | 0.0026 | 0.0031 | 0.0035 | 0.0037 |
2 | 0,5 x D | 130 | 180 | 230 | IPT | 0.0015 | 0.0017 | 0.0021 | 0.0024 | 0.028 | 0.003 | |
3 | 0,3 x D | 60 | 80 | 110 | IPT | 0.0009 | 0.0011 | 0.0014 | 0.0016 | 0.0019 | 0.002 | |
4 | 0,75 x D | 130 | 150 | 160 | IPT | 0.0013 | 0.0016 | 0.002 | 0.0022 | 0.0025 | 0.0028 | |
H | 1 | 0,75 x D | 230 | 320 | 390 | IPT | 0.0016 | 0.0019 | 0.0023 | 0.0027 | 0.003 | 0.0032 |
2 | 0,75 x D | 185 | 255 | 315 | IPT | 0.0011 | 0.0013 | 0.0016 | 0.0019 | 0.0021 | 0.0022 |
Material
|
KCPM15–KCSM15 | Recommended feed per revolution (fn =mm/rev) for plunging and drilling | ||||||||||||
Cutting Speed
|
D1
|
|||||||||||||
Max Depth | Applicable | Coolant | Min | Start | Max | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1-1/4 | ||
P | 0 | 1 x D | Preferred | 360 | 430 | 490 | IPR | 0.0022 | 0.0026 | 0.0033 | 0.0044 | 0.0051 | 0.006 | |
1 | 1 x D | Required | 360 | 430 | 490 | IPR | 0.0022 | 0.0026 | 0.0033 | 0.0044 | 0.0051 | 0.006 | ||
2 | 1 x D | Required | 360 | 430 | 490 | IPR | 0.0022 | 0.0026 | 0.0033 | 0.0044 | 0.0051 | 0.006 | ||
3 | 1 x D | Required | 330 | 350 | 390 | IPR | 0.0017 | 0.0019 | 0.003 | 0.0035 | 0.0041 | 0.0053 | ||
4 | 1 x D | Required | 220 | 280 | 330 | IPR | 0.0017 | 0.0019 | 0.003 | 0.0035 | 0.0041 | 0.0053 | ||
5 | 0.75 x D | Required | 150 | 160 | 210 | IPR | 0.0011 | 0.0014 | 0.0018 | 0.0024 | 0.0028 | 0.003 | ||
6 | 0.75 x D | Required | 130 | 150 | 190 | IPR | 0.0011 | 0.0014 | 0.0018 | 0.0024 | 0.0028 | 0.003 | ||
M | 1 | 0.75 x D | Required | 190 | 220 | 260 | IPR | 0.0017 | 0.0019 | 0.003 | 0.0035 | 0.0041 | 0.0053 | |
2 | 0.75 x D | Required | 130 | 150 | 190 | IPR | 0.0011 | 0.0014 | 0.0018 | 0.0024 | 0.0028 | 0.003 | ||
3 | 0.5 x D | Required | 110 | 130 | 160 | IPR | 0.0011 | 0.0014 | 0.0018 | 0.0024 | 0.0028 | 0.003 | ||
K | 1 | 1 x D | Preferred | 330 | 360 | 390 | IPR | 0.0022 | 0.0026 | 0.0033 | 0.0044 | 0.0051 | 0.006 | |
2 | 1 x D | Required | 300 | 330 | 360 | IPR | 0.0017 | 0.0019 | 0.003 | 0.0035 | 0.0041 | 0.0053 | ||
3 | 0.75 x D | Required | 250 | 280 | 330 | IPR | 0.0017 | 0.0019 | 0.003 | 0.0035 | 0.0041 | 0.0053 | ||
S | 1 | 0.5 x D | Required | 100 | 130 | 180 | IPR | 0.0017 | 0.0019 | 0.003 | 0.0035 | 0.0041 | 0.0053 | |
2 | 0.5 x D | Required | 100 | 120 | 150 | IPR | 0.0011 | 0.0014 | 0.0018 | 0.0024 | 0.0028 | 0.003 | ||
3 | 0.3 x D | Required | 50 | 60 | 90 | IPR | 0.0007 | 0.0009 | 0.0012 | 0.0017 | 0.0019 | 0.0023 | ||
4 | 0.75 x D | Required | 100 | 110 | 130 | IPR | 0.0011 | 0.0014 | 0.0018 | 0.0024 | 0.0028 | 0.003 | ||
H | 1 | 0.75 x D | Required | 190 | 220 | 260 | IPR | 0.0017 | 0.0019 | 0.003 | 0.0035 | 0.0041 | 0.0053 | |
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Material
|
short | medium | long | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||
A | B | adapter reach | D1
|
|||||||||||||||||
KCPM15 | KCPM15 | KCPM15 | ||||||||||||||||||
Cutting Speed
|
Cutting Speed
|
Cutting Speed
|
frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||||||||||
ap | ae | ap | Min | Max | Min | Max | Min | Max | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | 1.2500 | |||||
P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
1 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 | |
2 | 1.5 x D | 0.5 x D | 1 x D | 460 | – | 620 | 414 | – | 558 | 414 | – | 558 | IPT | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 | |
4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | 0.0020 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 | |
5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | 170 | – | 281 | 160 | – | 264 | IPT | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | 136 | – | 213 | 128 | – | 200 | IPT | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 | |
M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
2 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 | |
K | 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 490 | 351 | – | 441 | 351 | – | 441 | IPT | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
2 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 460 | 324 | – | 414 | 324 | – | 414 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 430 | 324 | – | 387 | 324 | – | 387 | IPT | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
2 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 260 | 128 | – | 208 | 96 | – | 156 | IPT | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | 0.0012 | 0.0015 | 0.0018 | 0.0021 | 0.0024 | 0.0026 | |
4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | 0.0017 | 0.0021 | 0.0025 | 0.0028 | 0.0033 | 0.0036 | |
H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | 0.0020 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |
Material
|
KCPM15
| Recommended feed per revolution (fn =mm/rev) for plunging and drilling | ||||||||||||
Cutting Speed
|
D1
|
|||||||||||||
Max Depth | Applicable | Coolant | Min | Start | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | 32,0 | ||
P | 0 | 1 x D | Preferred | 110 | 130 | 150 | fn | 0,056 | 0,067 | 0,084 | 0,112 | 0,126 | 0,150 | |
1 | 1 x D | Required | 110 | 130 | 150 | fn | 0,056 | 0,067 | 0,084 | 0,112 | 0,126 | 0,150 | ||
2 | 1 x D | Required | 110 | 130 | 150 | fn | 0,056 | 0,067 | 0,084 | 0,112 | 0,126 | 0,150 | ||
3 | 1 x D | Required | 100 | 105 | 120 | fn | 0,042 | 0,049 | 0,075 | 0,088 | 0,105 | 0,135 | ||
4 | 1 x D | Required | 70 | 85 | 100 | fn | 0,042 | 0,049 | 0,075 | 0,088 | 0,105 | 0,135 | ||
5 | 0,75 x D | Required | 45 | 50 | 65 | fn | 0,028 | 0,035 | 0,046 | 0,060 | 0,070 | 0,076 | ||
6 | 0,75 x D | Required | 40 | 45 | 60 | fn | 0,028 | 0,035 | 0,046 | 0,060 | 0,070 | 0,076 | ||
M | 1 | 0,75 x D | Required | 60 | 70 | 80 | fn | 0,042 | 0,049 | 0,075 | 0,088 | 0,105 | 0,135 | |
2 | 0,75 x D | Required | 40 | 45 | 60 | fn | 0,028 | 0,035 | 0,046 | 0,060 | 0,070 | 0,076 | ||
3 | 0,5xD | Required | 35 | 40 | 50 | fn | 0,028 | 0,035 | 0,046 | 0,060 | 0,070 | 0,076 | ||
K | 1 | 1 x D | Preferred | 100 | 110 | 120 | fn | 0,056 | 0,067 | 0,084 | 0,112 | 0,126 | 0,150 | |
2 | 1 x D | Required | 90 | 100 | 110 | fn | 0,042 | 0,049 | 0,075 | 0,088 | 0,105 | 0,135 | ||
3 | 0,75 x D | Required | 75 | 85 | 100 | fn | 0,042 | 0,049 | 0,075 | 0,088 | 0,105 | 0,135 | ||
S | 1 | 0,5 x D | Required | 35 | 40 | 55 | fn | 0,042 | 0,049 | 0,075 | 0,088 | 0,105 | 0,135 | |
2 | 0,5 x D | Required | 30 | 35 | 45 | fn | 0,028 | 0,035 | 0,046 | 0,060 | 0,070 | 0,076 | ||
3 | 0,3 x D | Required | 15 | 20 | 28 | fn | 0,019 | 0,023 | 0,031 | 0,042 | 0,049 | 0,058 | ||
4 | 0,75 x D | Required | 30 | 35 | 40 | fn | 0,031 | 0,035 | 0,045 | 0,058 | 0,070 | 0,076 | ||
H | 1 | 0,75 x D | Required | 60 | 70 | 80 | fn | 0,042 | 0,049 | 0,075 | 0,088 | 0,105 | 0,135 | |
2 | 0,75 x D | Required | 50 | 60 | 70 | fn | 0,029 | 0,034 | 0,053 | 0,062 | 0,074 | 0,095 |
Material
|
Max Depth | Recommended feed per tooth (fz = mm/z) for Helical Interpolation and Ramping
|
||||||||||
KCPM15–KCSM15 | ||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||
Min | Start | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | 32,0 | |||
P | 0 | 1 x D | 125 | 150 | 175 | fz | 0,055 | 0,065 | 0,075 | 0,087 | 0,095 | 0,105 |
1 | 1 x D | 125 | 150 | 175 | fz | 0,055 | 0,065 | 0,075 | 0,087 | 0,095 | 0,105 | |
2 | 1 x D | 125 | 150 | 175 | fz | 0,055 | 0,065 | 0,075 | 0,087 | 0,095 | 0,105 | |
3 | 1 x D | 110 | 130 | 150 | fz | 0,047 | 0,054 | 0,067 | 0,078 | 0,088 | 0,095 | |
4 | 1 x D | 75 | 110 | 140 | fz | 0,041 | 0,048 | 0,059 | 0,068 | 0,075 | 0,080 | |
5 | 0,75 x D | 50 | 70 | 90 | fz | 0,037 | 0,043 | 0,054 | 0,062 | 0,070 | 0,075 | |
6 | 0,75 x D | 40 | 55 | 70 | fz | 0,031 | 0,036 | 0,044 | 0,050 | 0,055 | 0,060 | |
M | 1 | 0,75 x D | 75 | 90 | 105 | fz | 0,047 | 0,054 | 0,067 | 0,078 | 0,088 | 0,095 |
2 | 0,75 x D | 45 | 55 | 70 | fz | 0,037 | 0,043 | 0,054 | 0,062 | 0,070 | 0,075 | |
3 | 0,5 x D | 40 | 50 | 65 | fz | 0,031 | 0,036 | 0,044 | 0,050 | 0,055 | 0,060 | |
K | 1 | 1 x D | 110 | 125 | 140 | fz | 0,055 | 0,065 | 0,075 | 0,087 | 0,095 | 0,105 |
2 | 1 x D | 100 | 115 | 130 | fz | 0,047 | 0,054 | 0,067 | 0,078 | 0,088 | 0,095 | |
3 | 0,75 x D | 90 | 105 | 120 | fz | 0,037 | 0,043 | 0,054 | 0,062 | 0,070 | 0,075 | |
S | 1 | 0,5 x D | 40 | 60 | 80 | fz | 0,047 | 0,054 | 0,067 | 0,078 | 0,088 | 0,095 |
2 | 0,5 x D | 40 | 55 | 70 | fz | 0,037 | 0,043 | 0,054 | 0,062 | 0,070 | 0,075 | |
3 | 0,3 x D | 20 | 25 | 35 | fz | 0,024 | 0,029 | 0,036 | 0,041 | 0,047 | 0,050 | |
4 | 0,75 x D | 40 | 45 | 50 | fz | 0,034 | 0,040 | 0,050 | 0,057 | 0,064 | 0,070 | |
H | 1 | 0,75 x D | 70 | 100 | 120 | fz | 0,041 | 0,048 | 0,059 | 0,068 | 0,075 | 0,080 |
2 | 0,75 x D | 60 | 90 | 110 | fz | 0,029 | 0,034 | 0,041 | 0,048 | 0,053 | 0,056 |
1.5xD | 0.5XD | 1xD | 0 | 150 | - | 200 | 135 | - | 180 | 135 | - | 180 | Fz | 0.072 | 0.083 | 0.101 | 0.108 | 0.114 | 0.124 | 0.125 | |
1.5xD | 0.5XD | 1xD | 0 | 150 | - | 200 | 135 | - | 180 | 135 | - | 180 | Fz | 0.072 | 0.083 | 0.101 | 0.108 | 0.114 | 0.124 | 0.125 | |
1.5xD | 0.5XD | 1xD | 0 | 140 | - | 190 | 126 | - | 171 | 126 | - | 171 | Fz | 0.072 | 0.083 | 0.101 | 0.108 | 0.114 | 0.124 | 0.125 | |
1.5xD | 0.5XD | 1xD | 0 | 120 | - | 160 | 108 | - | 144 | 108 | - | 144 | Fz | 0.061 | 0.070 | 0.087 | 0.095 | 0.101 | 0.114 | 0.123 | |
1.5xD | 0.5XD | 0.75xD | 0 | 90 | - | 150 | 81 | - | 135 | 81 | - | 135 | Fz | 0.054 | 0.062 | 0.077 | 0.083 | 0.088 | 0.098 | 0.102 | |
1.5xD | 0.5XD | 1xD | 0 | 60 | - | 100 | 51 | - | 85 | 48 | - | 80 | Fz | 0.048 | 0.056 | 0.070 | 0.076 | 0.081 | 0.091 | 0.099 | |
1.5xD | 0.5XD | 0.75xD | 0 | 50 | - | 75 | 43 | - | 64 | 40 | - | 60 | Fz | 0.040 | 0.047 | 0.057 | 0.061 | 0.065 | 0.071 | 0.073 | |
1.5xD | 0.5XD | 1xD | 0 | 90 | - | 115 | 72 | - | 92 | 63 | - | 81 | Fz | 0.061 | 0.070 | 0.087 | 0.095 | 0.101 | 0.114 | 0.123 | |
1.5xD | 0.5XD | 1xD | 0 | 60 | - | 80 | 48 | - | 64 | 42 | - | 56 | Fz | 0.048 | 0.056 | 0.070 | 0.076 | 0.081 | 0.091 | 0.099 | |
1.5xD | 0.5XD | 1xD | 0 | 60 | - | 70 | 48 | - | 56 | 42 | - | 49 | Fz | 0.040 | 0.047 | 0.057 | 0.061 | 0.065 | 0.071 | 0.073 | |
1.5xD | 0.5XD | 1xD | 0 | 120 | - | 150 | 108 | - | 135 | 108 | - | 135 | Fz | 0.072 | 0.083 | 0.101 | 0.108 | 0.114 | 0.124 | 0.125 | |
1.5xD | 0.5XD | 1xD | 0 | 110 | - | 140 | 99 | - | 126 | 99 | - | 126 | Fz | 0.061 | 0.070 | 0.087 | 0.095 | 0.101 | 0.114 | 0.123 | |
1.5xD | 0.5XD | 1xD | 0 | 110 | - | 130 | 99 | - | 117 | 99 | - | 117 | Fz | 0.048 | 0.056 | 0.070 | 0.076 | 0.081 | 0.091 | 0.099 | |
1.5xD | 0.3XD | 0.3XD | 0 | 50 | - | 90 | 40 | - | 72 | 30 | - | 54 | Fz | 0.061 | 0.070 | 0.087 | 0.095 | 0.101 | 0.114 | 0.123 | |
1.5xD | 0.3XD | 0.3XD | 0 | 50 | - | 80 | 40 | - | 64 | 30 | - | 48 | Fz | 0.048 | 0.056 | 0.070 | 0.076 | 0.081 | 0.091 | 0.099 | |
1.5xD | 0.3XD | 0.3XD | 0 | 50 | - | 80 | 40 | - | 64 | 30 | - | 48 | Fz | 0.032 | 0.037 | 0.046 | 0.050 | 0.054 | 0.061 | 0.067 | |
1.5xD | 0.5XD | 1xD | 0 | 50 | - | 60 | 40 | - | 48 | 30 | - | 36 | Fz | 0.045 | 0.052 | 0.064 | 0.069 | 0.074 | 0.084 | 0.090 | |
1.5xD | 0.5XD | 0.75xD | 0 | 80 | - | 140 | 64 | - | 112 | 48 | - | 84 | Fz | 0.054 | 0.062 | 0.077 | 0.083 | 0.088 | 0.098 | 0.102 | |
1.5xD | 0.2XD | 0.5xD | 0 | 70 | - | 120 | 56 | - | 96 | 42 | - | 72 | Fz | 0.040 | 0.047 | 0.057 | 0.061 | 0.065 | 0.071 | 0.073 |
ISO製品型番
ANSI製品型番
to find similar products.Please select a file to download
Models
Product data
I have read and accepted the Terms & Conditions of use
Can’t find the file type you’re looking for?
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
SAP Material Number | ISO製品型番 | 材種 |
---|
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.
ご登録いただきありがとうございます。今からウェブサイトにアクセス頂き、ご利用が可能でございます。
You are about to leave the Solution building process.
Are you sure you want to leave?