*に類似する製品:
ハイドロスリーブ • HC 1/2~HC 1 1/4 • インチ(インチのボア付き)
レデューサスリーブ
製品番号1093528
ISO カタログ ID12HC0562ANSIカタログID12HC0562
穴あけ加工 — スルークーラント
シャンク — ストレート プレーン ≤h6
クーラント — スルークーラント 最大100 bar(1500 psi)
クーラント — スルークーラント 最大100 bar(1500 psi)
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
製品番号 | 1093528 |
ISO カタログ ID | 12HC0562 |
ANSIカタログID | 12HC0562 |
[D2] Body Diameter 1 Workpiece Side | 36 mm |
[D2] Body Diameter 1 Workpiece Side | 1.4173 in |
[L1] Gage Length 1 | 4 mm |
[L1] Gage Length 1 | 0.1575 in |
[L9] Clamping Length | 46 mm |
[L9] Clamping Length | 1.811 in |
[LS] Shank Length | 60 mm |
[LS] Shank Length | 2.3622 in |
[D] Adapter / Shank / Bore Diameter | 31.75 mm |
[D] Adapter / Shank / Bore Diameter | 1.25 in |
[D1] Adapter / Shank / Bore Diameter | 14.288 mm |
[D1] Adapter / Shank / Bore Diameter | 0.5625 in |
使用法と用途
穴あけ加工 — スルークーラント
シャンク — ストレート プレーン ≤h6
クーラント — スルークーラント 最大100 bar(1500 psi)
クーラント — スルークーラント 最大100 bar(1500 psi)
特徴と利点
- One-piece design with slot configuration to seal coolant
- Cutting tool must be cylindrical and have a through hole when using coolant
- Sleeve must be inserted completely into the hydraulic chuck until shoulder mates against the hydraulic chuck front face
- Cutting tools must be in full contact with the sleeve bore length (L9)
送りと速度を計算するソリューションを作成する
ソリューションを作成したら、送りと速度アイコンを選択するだけで、システムが推奨事項を提供します。マシンと仕様を追加して情報をカスタマイズしたり、スライダーを使用して調整することもできます。
I have read and accepted the Terms & Conditions of use