Name: KenFeed™ 2X用インサート • WOEJ09....GD
SKU: 4034882
Rating: 0 (0 reviews)

インサート選択

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
P3–P4	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
P5–P6	.S..GD	KCPK30	.S..GD	KC725M	.S..HD	KC725M
M1–M2	.S..GD	KC522M	.S..GD	KC725M	.S..HD	KC725M
M3	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
K1–K2	.S..HD	KCK15	.S..HD	KCK15	.S..HD	KCK15
K3	.S..GD	KCPK30	.S..HD	KCK15	.S..HD	KCPK30
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.S..GD	KC522M	.S..GD	KC725M	.S..HD	KC725M
S3	.S..GD	KC725M	.S..GD	KCPM40	.S..HD	KCPM40
S4	.S..GD	KC522M	.S..HD	KC522M	.S..HD	KC725M
H1	–	–	–	–	–	–

Insert Selection Guide

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
	(Hafif geometri)				(Sert geometri)
	Aşınma direnci				Tokluk
	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
P3–P4	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
P5–P6	.S..GD	KCPK30	.S..GD	KC725M	.S..HD	KC725M
M1–M2	.S..GD	KC522M	.S..GD	KC725M	.S..HD	KC725M
M3	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
K1–K2	.S..HD	KCK15	.S..HD	KCK15	.S..HD	KCK15
K3	.S..GD	KCPK30	.S..HD	KCK15	.S..HD	KCPK30
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.S..GD	KC522M	.S..GD	KC725M	.S..HD	KC725M
S3	.S..GD	KC725M	.S..GD	KCPM40	.S..HD	KCPM40
S4	.S..GD	KC522M	.S..HD	KC522M	.S..HD	KC725M
H1	–	–	–	–	–	–

続きを読むView Less

送り量

推奨送り量の開始値 [mm]

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	5%			10%			20%			30%			40–100%
.S..GD	1,15	2,42	3,84	0,82	1,71	2,67	0,61	1,26	1,96	0,53	1,10	1,70	0,49	1,01	1,55	.S..GD
.S..HD	1,15	2,78	4,27	0,82	1,96	2,94	0,61	1,44	2,16	0,53	1,26	1,87	0,49	1,15	1,71	.S..HD

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

Recommended Starting Feeds [IPT]

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	5%			10%			20%			30%			40–100%
.S..GD	.045	.089	.141	.032	.063	.098	.024	.047	.072	.021	.040	.063	.019	.037	.057	.S..GD
.S..HD	.045	.109	.168	.032	.077	.116	.024	.057	.085	.021	.049	.074	.019	.045	.067	.S..HD

続きを読むView Less

速度

推奨切削速度の開始値 [m/min]

Malzeme grubu		KC522M			KC725M			KCK15			KCPK30
P	1	395	345	325	315	275	255	–	–	–	545	475	440
	2	330	290	240	260	230	195	–	–	–	335	305	275
	3	305	255	215	240	205	170	–	–	–	305	275	250
	4	270	225	180	215	180	145	–	–	–	225	210	190
	5	225	200	180	180	160	145	–	–	–	310	275	255
	6	200	150	120	160	120	95	–	–	–	190	165	–
M	1	245	215	200	205	180	165	–	–	–	250	220	190
	2	225	190	160	185	160	130	–	–	–	225	195	170
	3	170	145	115	140	120	95	–	–	–	175	160	140
K	1	275	250	220	–	–	–	505	460	410	355	320	285
	2	215	195	180	–	–	–	400	355	330	280	255	230
	3	180	160	145	–	–	–	335	300	275	235	210	195
N	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
S	1	50	45	35	45	35	30	–	–	–	–	–	–
	2	50	45	35	45	35	30	–	–	–	–	–	–
	3	60	50	35	55	45	30	–	–	–	–	–	–
	4	85	60	45	75	55	35	–	–	–	–	–	–
H	1	145	110	85	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–

続きを読むView Less

アプリケーションデータ

ソリッドからの最大リニアランピングとヘリカル補間 • インチ

Freze tipi	Katalog numarası	recommended ramping angle (for continuous ramping process)	max ramp angle when Ap max (not for continuous ramping process)	max ramp angle for 360° helical interpolation	minimum delik çapı (DH min)	maksimum düz tabanlı delik çapı (DH1 maks)	maksimum delik çapı (Tabanı düz olmayan delik)
Screw-On	KF2X100W0902M12L138	3.5°	5.2°	3.1°	1.291	1.35	2.0
	KF2X125W0902M16L169	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X125W0903M16L169	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X150W0903M16L169	1.4°	2.1°	1.2°	2.310	2.37	3.0
	KF2X150W0904M16L169	1.4°	2.1°	1.2°	2.310	2.37	3.0
End Mills	KF2X100W0902C100L600	3.5°	5.2°	3.1°	1.291	1.35	2.0
	KF2X100W0902C100L800	3.5°	5.2°	3.1°	1.291	1.35	2.0
	KF2X125W0903C125L600	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X125W0903C125L800	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X150W0903C125L600	1.4°	2.1°	1.2°	2.310	2.37	3.0
	KF2X150W0903C125L800	1.4°	2.1°	1.2°	2.310	2.37	3.0
Face Mills	KF2X150W0904S050L157	1.4°	2.1°	1.2°	2.310	2.37	3.0
	KF2X200W0905S075L157	1.0°	1.4°	0.8°	3.307	3.37	4.0
	KF2X200W0906S075L157	1.0°	1.4°	0.8°	3.307	3.37	4.0
	KF2X250W0906S075L175	0.7°	1.1°	0.6°	4.305	4.36	5.0
	KF2X300W0907S100L175	0.6°	1.0°	0.5°	5.303	5.36	6.0
	KF2X300W0907S125L200	0.6°	1.0°	0.5°	5.303	5.36	6.0

General Programming Information for Applying KenFeed 2X • IC 09

Rt	Wt	t
.110	.312	.045

ソリッドからの最大リニアランピングとヘリカル補間 • インチ

Freze tipi	Katalog numarası	recommended ramping angle (for continuous ramping process)	max ramp angle when Ap max (not for continuous ramping process)	max ramp angle for 360° helical interpolation	minimum delik çapı (DH min)	maksimum düz tabanlı delik çapı (DH1 maks)	maksimum delik çapı (Tabanı düz olmayan delik)
Screw-On	KF2X2X25Z02M12WO09	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X32Z03M16WO09	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X35Z03M16WO09	1.6°	2.4°	1.4°	46,8	54,0	70
	KF2X42Z04M16WO09	1.2°	1.9°	0.8°	68,7	75,9	84
End Mills	KF2X25Z02A25WO09L140	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X25Z02A25WO09L200	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X25Z02A25WO09L300	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X28Z02A25WO09L200	3.1°	4.6°	2.5°	31,6	38,8	56
	KF2X32Z03A32WO09L150	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X32Z03A32WO09L200	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X32Z03A32WO09L300	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X35Z03A32WO09L200	1.6°	2.4°	1.4°	46,8	54,0	70
Face Mills	KF2X40Z04WO09	1.3°	2.0°	1.2°	56,4	63,6	80
	KF2X50Z05WO09	1.0°	1.5°	0.8°	76,7	83,9	100
	KF2X52Z05WO09	1.0°	1.4°	0.8°	80,7	87,9	104
	KF2X63Z05S22WO09	0.8°	1.2°	0.6°	102,7	109,9	126
	KF2X63Z05WO09	0.8°	1.2°	0.6°	102,7	109,9	126
	KF2X66Z06S22WO09	0.7°	1.1°	0.5°	108,7	115,9	132
	KF2X66Z06WO09	0.7°	1.1°	0.5°	108,7	115,9	132
	KF2X80Z07WO09	0.6°	0.9°	0.4°	136,6	143,8	160

ソリッドからの最大リニアランピングとヘリカル補間 • インチ

Çap	maks rampa açısı	max ramp angle for 360° helical interpolation	max plunge depth	minimum delik çapı (DH min)	maksimum düz tabanlı delik çapı (DH1 maks)	maksimum delik çapı (Tabanı düz olmayan delik)
1.50	5.5°	1.93°	0.076	1.90	2.22	3.00
2.00	4.4°	1.18°	0.076	2.86	3.22	4.00
2.50	3.0°	0.85°	0.076	3.85	4.22	5.00
3.00	2.3°	0.67°	0.076	4.84	5.21	6.00
4.00	1.6°	0.47°	0.076	6.84	7.21	8.00
5.00	1.2°	0.36°	0.076	8.84	9.21	10.00

続きを読むView Less

You are about to leave the Solution building process.

Are you sure you want to leave?

製品番号	4034882
ISO カタログ ID	WOEJ090512SRGD
ANSIカタログID	WOEJ090512SRGD
Grade	KC522M
[D] Insert IC Size	8.9 mm
[D] Insert IC Size	.35 in
[S] Insert Thickness	5.4 mm
[S] Insert Thickness	.213 in
[Rε] Corner Radius	1.2 mm
[Rε] Corner Radius	.048 in
Cutting Edges per Insert	6

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

営業チームにお問い合わせください

営業チームにお問い合わせください

ソリューション編集

ソリューション追加

*に類似する製品:

KenFeed™ 2X用インサート • WOEJ09....GD

スローアウェイインサート • WOEJ09...

製品番号4034882

ISO カタログ IDWOEJ090512SRGDANSIカタログIDWOEJ090512SRGD

ワーク材料

特徴と利点