K105(~5 x D) • K10 • A 섕크 • TF 드릴
일반적인 표현
모든 가격 옵션을 알아보려면 당사 영업팀에 문의하세요.
특징 및 장점
- TF drills without through coolant for high metal removal rates and excellent hole quality in short chipping materials such as gray cast iron, ductile iron, and aluminum, as well as in short-hole titanium applications.
- Material-specific SC drill with three cutting edges for higher feed rates than with two-edged drills.
- Three spacious flutes for rapid chip evacuation.
- Three-margin lands deliver better hole quality and straightness than two-flute drills.
- TiAlN-coated KC7210™ grade for higher wear resistance at elevated speeds.
- Uncoated K10™ grade helps to prevent built-up edge in drilling aluminum and high-temp alloys.
- 드릴링
- 드릴링: 경사 출구면
- 외부 쿨런트: 드릴링
- 섕크 — 원통형 일반 ≤h6
- 헬릭스각: 30°
- 드릴링 깊이: 5x
- Drilling: Cross-Hole Drilling
공차 • Inch | ||
공칭 사이즈 범위 | D1 공차 m7 | D 공차 h6 |
.0002/.0006 | .0000/-.0003 | |
.0002/.0008 | .0000/-.0004 | |
.0003/.0010 | .0000/-.0004 | |
.0003/.0011 | .0000/-.0005 |
공차 • Metric | ||
공칭 사이즈 범위 | D1 공차 m7 | D 공차 h6 |
0,004/0,016 | 0,000/-0,008 | |
0,006/0,021 | 0,000/-0,009 | |
0,007/0,025 | 0,000/-0,011 | |
0,008/0,029 | 0,000/-0,013 |
TF 드릴 • B/K105 시리즈 • K10™ 재종 • 외부 쿨런트 • 드릴 직경 0.1181–0.7874″ • Inch
소재 그룹 | |||||||||||||
가공 속도 | Metric | ||||||||||||
범위 | 직경별 권장 이송(f) | ||||||||||||
최소 | 초기값 | 최대 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
K | 1 | 60 | 85 | 110 | mm/r | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 70 | 90 | mm/r | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 50 | 70 | mm/r | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,02–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/r | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | 0,03–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 250 | 250 | mm/r | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
3 | 100 | 180 | 400 | mm/r | 0,09–0,16 | 0,10–0,20 | 0,12–0,26 | 0,16–0,36 | 0,20–0,40 | 0,24–0,45 | 0,30–0,50 | 0,34–0,60 | |
4 | 60 | 170 | 250 | mm/r | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 20 | 20 | 50 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
소재 그룹 | |||||||||||||
소재 그룹 | 가공 속도 | Inch | |||||||||||
범위 | 직경별 권장 이송(f) | ||||||||||||
최소 | 초기값 | 최대 | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
K | 1 | 200 | 280 | 360 | IPR | 0.004–0.008 | 0.005–0.008 | 0.006–0.011 | 0.008–0.014 | 0.009–0.017 | 0.009–0.020 | 0.011–0.024 | 0.012–0.027 |
2 | 230 | 230 | 300 | IPR | 0.004–0.008 | 0.005–0.008 | 0.006–0.011 | 0.008–0.014 | 0.009–0.017 | 0.009–0.020 | 0.011–0.024 | 0.012–0.027 | |
3 | 160 | 160 | 230 | IPR | 0.004–0.007 | 0.004–0.007 | 0.006–0.010 | 0.007–0.013 | 0.001–0.016 | 0.009–0.019 | 0.010–0.023 | 0.011–0.026 | |
N | 1 | 330 | 690 | 1340 | IPR | 0.004–0.006 | 0.004–0.008 | 0.007–0.013 | 0.008–0.015 | 0.010–0.017 | 0.001–0.020 | 0.017–0.023 | 0.025–0.031 |
2 | 330 | 820 | 820 | IPR | 0.004–0.008 | 0.005–0.008 | 0.007–0.013 | 0.010–0.017 | 0.012–0.020 | 0.014–0.023 | 0.017–0.029 | 0.021–0.035 | |
3 | 330 | 590 | 1310 | IPR | 0.004–0.006 | 0.004–0.008 | 0.005–0.010 | 0.006–0.014 | 0.008–0.016 | 0.009–0.018 | 0.012–0.020 | 0.013–0.024 | |
4 | 200 | 560 | 820 | IPR | 0.003–0.006 | 0.005–0.007 | 0.007–0.013 | 0.008–0.014 | 0.009–0.015 | 0.013–0.018 | 0.015–0.019 | 0.023–0.030 | |
S | 4 | 70 | 70 | 160 | IPR | 0.001–0.002 | 0.002–0.003 | 0.003–0.004 | 0.004–0.005 | 0.004–0.006 | 0.005–0.007 | 0.007–0.009 | 0.009–0.012 |
가공 속도 | Metric | ||||||||||||
범위 | 직경별 권장 이송(f) | ||||||||||||
소재 그룹 | 최소 | 초기값 | 최대 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
K | 1 | 60 | 85 | 110 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 72 | 90 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 51 | 70 | mm/dev | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | ,020–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/dev | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | ,033–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 248 | 250 | mm/dev | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
4 | 60 | 173 | 250 | mm/dev | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 30 | 20 | 51 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
소재 그룹 | |||||||||||||
소재 그룹 | 가공 속도 | Inch | |||||||||||
범위 | 직경별 권장 이송(f) | ||||||||||||
최소 | 초기값 | 최대 | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
S | 4 | 70 | 100 | 160 | IPR | – | – | 0.001–0.003 | 0.001–0.003 | 0.001–0.003 | 0.003–0.006 | 0.003–0.006 | – |
소재 그룹 | |||||||||||||
가공 속도 | Metric | ||||||||||||
범위 | 직경별 권장 이송(f) | ||||||||||||
최소 | 초기값 | 최대 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
S | 4 | 20 | 30 | 50 | mm/r | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |
가공 속도 | Metric | ||||||||||||
범위 | 직경별 권장 이송(f) | ||||||||||||
소재 그룹 | 최소 | 초기값 | 최대 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
S | 4 | 20 | 30 | 50 | mm/dev | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |