환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

볼 노즈(KDMB) 및 토로이덜(KDMT) 스타일 인서트가 포함된 인덱서블 밀링 솔루션은 모든 황삭 및 정삭 카피 밀링 적용 분야에 적합합니다.

KDMB - 볼 노즈 스타일

  • 3D 카피 밀링 적용 분야용 볼 노즈 인서트.
  • 강철 및 초경 섕크가 있는 엔드 밀. 직선, 넥 및 테이퍼 섕크 스타일.
  • 테이퍼 섕크 스타일은 5축 기계 가공에 적합.
  • 돌출 길이가 짧은 적용 분야용 스크류온 커터 (관통 쿨런트 사용).

KDMT/KDMS - 토로이덜

  • 플랫바텀 적용 분야 및 언더컷용 토로이덜 인서트.
  • 고이송 적용 분야에 적합.
  • 강철 섕크 및 초경 섕크(관통 쿨런트 사용)가 있는 엔드 밀.
  • 돌출 길이가 짧은 적용 분야용 스크류온 커터 (관통 쿨런트 사용).
  • 터렛 탑재형 클램핑 유닛용 솔리드 ER 콜릿을 사용하는 선반 장비에도 적용 가능.
  • 90° 숄더 적용 분야용 정사각형 인서트.
필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (203)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(203)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(203)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(203)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(203)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(203)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(203)
    • M Stainless Steel (203)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(203)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(203)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(203)
    • K Cast Iron (217)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(217)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(217)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(217)
    • N Non-Ferrous Materials (127)
      • N1
        Wrought Aluminum (127)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(127)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(127)
    • S High-Temp Alloys (138)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(84)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(84)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(138)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(84)
    • H Hardened Materials (187)
      • H1
        Hardened Materials 44-48 HRC(171)
      • H2
        Hardened Materials 48-55 HRC(187)
      • H3
        Hardened Materials 56-60 HRC(187)
    Applications
    Applications
    • PocketPocket (101)
    • Pocket HelicalPocket Helical (73)
    • Pocket MillingPocket Milling (101)
    • Profile MillingProfile Milling (101)
    • RampingRamping (101)
    • Shoulder Ball NoseShoulder Ball Nose (101)
    • Shoulder MillingShoulder Milling (101)
    • Slot Ball NoseSlot Ball Nose (73)
    • Slot MillingSlot Milling (101)
    • Slot Square EndSlot Square End (28)
    Cutting Diameter
    Cutting Diameter
    • 0.237 in(4)
    • 0.25 in(3)
    • 0.312 in(2)
    • 0.315 in(5)
    • 0.375 in(4)
    • 0.394 in(7)
    • 0.473 in(13)
    • 0.5 in(9)
    • 0.625 in(3)
    • 0.63 in(13)
    • 0.75 in(8)
    • 0.787 in(11)
    • 0.984 in(6)
    • 1.0 in(7)
    • 1.25 in(2)
    • 1.26 in(4)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 6.0 mm(4)
    • 6.351 mm(3)
    • 7.926 mm(2)
    • 8.0 mm(5)
    • 9.525 mm(4)
    • 10.0 mm(7)
    • 12.0 mm(13)
    • 12.701 mm(9)
    • 15.875 mm(3)
    • 16.0 mm(13)
    • 19.05 mm(8)
    • 20.0 mm(11)
    • 25.0 mm(6)
    • 25.401 mm(7)
    • 31.75 mm(2)
    • 32.0 mm(4)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 2.5 mm(2)
    • 3.0 mm(13)
    • 3.176 mm(3)
    • 3.95 mm(1)
    • 3.975 mm(1)
    • 4.0 mm(11)
    • 4.775 mm(4)
    • 5.0 mm(12)
    • 6.0 mm(11)
    • 6.351 mm(4)
    • 7.95 mm(3)
    • 8.0 mm(9)
    • 9.525 mm(6)
    • 10.0 mm(6)
    • 12.5 mm(5)
    • 12.701 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(3)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.098 in(2)
    • 0.119 in(13)
    • 0.125 in(3)
    • 0.156 in(2)
    • 0.157 in(11)
    • 0.188 in(4)
    • 0.197 in(12)
    • 0.237 in(11)
    • 0.25 in(4)
    • 0.313 in(3)
    • 0.315 in(9)
    • 0.375 in(6)
    • 0.394 in(6)
    • 0.492 in(5)
    • 0.5 in(5)
    • 0.625 in(2)
    • 0.63 in(3)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.119 in(1)
    • 0.157 in(2)
    • 0.197 in(2)
    • 0.237 in(1)
    • 0.315 in(3)
    • 0.394 in(1)
    • 0.473 in(1)
    • 0.63 in(1)
    • 0.787 in(2)
    • 0.984 in(2)
    • 1.024 in(2)
    • 1.102 in(2)
    • 1.181 in(1)
    • 1.26 in(3)
    • 1.31 in(1)
    • 1.319 in(1)
    • 1.339 in(3)
    • 1.379 in(3)
    • 1.393 in(1)
    • 1.417 in(1)
    • 1.457 in(3)
    • 1.575 in(5)
    • 1.599 in(1)
    • 1.623 in(1)
    • 1.655 in(1)
    • 1.754 in(1)
    • 1.772 in(3)
    • 1.811 in(2)
    • 1.85 in(3)
    • 1.891 in(2)
    • 1.901 in(1)
    • 1.909 in(1)
    • 1.95 in(1)
    • 1.969 in(3)
    • 1.982 in(1)
    • 2.047 in(4)
    • 2.087 in(2)
    • 2.126 in(1)
    • 2.165 in(2)
    • 2.205 in(1)
    • 2.244 in(2)
    • 2.362 in(6)
    • 2.37 in(1)
    • 2.402 in(1)
    • 2.48 in(1)
    • 2.757 in(5)
    • 2.835 in(1)
    • 2.953 in(1)
    • 3.031 in(1)
    • 3.071 in(1)
    • 3.15 in(3)
    • 3.228 in(1)
    • 3.539 in(1)
    • 3.938 in(2)
    • 4.134 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 3.0 mm(1)
    • 4.0 mm(2)
    • 5.0 mm(2)
    • 6.0 mm(1)
    • 8.0 mm(3)
    • 10.0 mm(1)
    • 12.0 mm(1)
    • 16.0 mm(1)
    • 20.0 mm(2)
    • 25.0 mm(2)
    • 26.0 mm(2)
    • 28.0 mm(2)
    • 30.0 mm(1)
    • 32.0 mm(3)
    • 33.275 mm(1)
    • 33.5 mm(1)
    • 34.0 mm(3)
    • 35.0 mm(3)
    • 35.35 mm(1)
    • 36.0 mm(1)
    • 37.0 mm(3)
    • 40.0 mm(5)
    • 40.625 mm(1)
    • 41.225 mm(1)
    • 42.0 mm(1)
    • 44.526 mm(1)
    • 45.0 mm(3)
    • 46.0 mm(2)
    • 47.0 mm(3)
    • 48.0 mm(2)
    • 48.276 mm(1)
    • 48.5 mm(1)
    • 49.526 mm(1)
    • 50.0 mm(3)
    • 50.35 mm(1)
    • 52.0 mm(4)
    • 53.0 mm(2)
    • 54.0 mm(1)
    • 55.0 mm(2)
    • 56.0 mm(1)
    • 57.0 mm(2)
    • 60.0 mm(6)
    • 60.2 mm(1)
    • 61.0 mm(1)
    • 63.0 mm(1)
    • 70.0 mm(5)
    • 72.0 mm(1)
    • 75.0 mm(1)
    • 77.0 mm(1)
    • 78.0 mm(1)
    • 80.0 mm(3)
    • 82.0 mm(1)
    • 89.9 mm(1)
    • 100.0 mm(2)
    • 105.0 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (93)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Screw-On Connection (7)
    • Straight-Cylindrical (94)
    Number of Flutes
    Number of Flutes
    • 2 (101)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (1)
    • 2.0 (226)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.713 in(2)
    • 1.792 in(2)
    • 1.949 in(1)
    • 2.028 in(1)
    • 2.441 in(1)
    • 3.543 in(2)
    • 3.938 in(6)
    • 4.724 in(5)
    • 4.803 in(3)
    • 5.118 in(2)
    • 5.12 in(1)
    • 5.197 in(1)
    • 5.513 in(8)
    • 5.591 in(3)
    • 5.906 in(13)
    • 5.909 in(1)
    • 5.984 in(2)
    • 6.281 in(1)
    • 6.299 in(13)
    • 6.307 in(1)
    • 6.378 in(4)
    • 6.891 in(7)
    • 6.969 in(2)
    • 7.48 in(5)
    • 7.559 in(2)
    • 7.875 in(1)
    • 8.268 in(7)
    • 8.27 in(1)
    • 8.346 in(1)
    • 9.055 in(1)
    • 9.449 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 43.5 mm(2)
    • 45.5 mm(2)
    • 49.5 mm(1)
    • 51.5 mm(1)
    • 62.0 mm(1)
    • 90.0 mm(2)
    • 100.0 mm(6)
    • 120.0 mm(5)
    • 122.0 mm(3)
    • 130.0 mm(2)
    • 130.05 mm(1)
    • 132.0 mm(1)
    • 140.0 mm(8)
    • 142.0 mm(3)
    • 150.0 mm(13)
    • 150.1 mm(1)
    • 152.0 mm(2)
    • 159.525 mm(1)
    • 160.0 mm(13)
    • 160.201 mm(1)
    • 162.0 mm(4)
    • 175.0 mm(7)
    • 177.0 mm(2)
    • 190.0 mm(5)
    • 192.0 mm(2)
    • 200.0 mm(1)
    • 210.0 mm(7)
    • 210.05 mm(1)
    • 212.0 mm(1)
    • 230.0 mm(1)
    • 240.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(9)
    • 0.02 in(1)
    • 0.024 in(3)
    • 0.031 in(39)
    • 0.039 in(41)
    • 0.04 in(20)
    • 0.052 in(8)
    • 0.063 in(33)
    • 0.079 in(14)
    • 0.103 in(2)
    • 0.119 in(14)
    • 0.125 in(8)
    • 0.156 in(9)
    • 0.157 in(20)
    • 0.188 in(13)
    • 0.197 in(18)
    • 0.237 in(20)
    • 0.25 in(18)
    • 0.312 in(12)
    • 0.313 in(12)
    • 0.315 in(17)
    • 0.375 in(17)
    • 0.394 in(19)
    • 0.492 in(16)
    • 0.5 in(15)
    • 0.625 in(7)
    • 0.63 in(10)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(9)
    • 0.5 mm(1)
    • 0.601 mm(3)
    • 0.8 mm(39)
    • 1.0 mm(41)
    • 1.026 mm(20)
    • 1.3 mm(8)
    • 1.6 mm(33)
    • 2.0 mm(14)
    • 2.6 mm(2)
    • 3.0 mm(14)
    • 3.176 mm(8)
    • 3.95 mm(8)
    • 3.975 mm(8)
    • 4.0 mm(20)
    • 4.775 mm(13)
    • 5.0 mm(18)
    • 6.0 mm(20)
    • 6.351 mm(18)
    • 7.926 mm(12)
    • 7.95 mm(12)
    • 8.0 mm(17)
    • 9.525 mm(17)
    • 10.0 mm(19)
    • 12.5 mm(16)
    • 12.701 mm(15)
    • 15.875 mm(7)
    • 16.0 mm(10)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC505M (94)
    • KC515M (103)
    • KC530M (94)
    • KCPH15 (95)
    • KCPK10 (162)
    • KCPK25 (92)
    • KCU15 (77)
    • KNS10 (109)
    Hand Of Tool
    Hand Of Tool
    • R (101)
    Rough Finish
    Rough Finish
    • F (64)
    Wiper Insert
    Wiper Insert
    • N (125)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 3.0 (101)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.237 in(5)
    • 0.25 in(3)
    • 0.312 in(2)
    • 0.313 in(1)
    • 0.315 in(9)
    • 0.375 in(5)
    • 0.394 in(11)
    • 0.473 in(13)
    • 0.5 in(10)
    • 0.625 in(4)
    • 0.63 in(13)
    • 0.75 in(10)
    • 0.787 in(13)
    • 0.984 in(9)
    • 1.0 in(9)
    • 1.25 in(2)
    • 1.26 in(6)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 6.0 mm(5)
    • 6.351 mm(3)
    • 7.926 mm(2)
    • 7.95 mm(1)
    • 8.0 mm(9)
    • 9.525 mm(5)
    • 10.0 mm(11)
    • 12.0 mm(13)
    • 12.701 mm(10)
    • 15.875 mm(4)
    • 16.0 mm(13)
    • 19.05 mm(10)
    • 20.0 mm(13)
    • 25.0 mm(9)
    • 25.401 mm(9)
    • 31.75 mm(2)
    • 32.0 mm(6)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Shape
    Insert Shape
    • DMB-BALL NOSE (149)
    • DMT-TOROIDAL (78)
    Neck Diameter
    Neck Diameter
    • 0.211 in(2)
    • 0.213 in(1)
    • 0.228 in(3)
    • 0.276 in(3)
    • 0.295 in(1)
    • 0.335 in(1)
    • 0.347 in(4)
    • 0.351 in(2)
    • 0.354 in(1)
    • 0.414 in(11)
    • 0.42 in(6)
    • 0.551 in(11)
    • 0.56 in(1)
    • 0.709 in(12)
    • 0.71 in(4)
    • 0.882 in(7)
    • 0.89 in(4)
    • 1.127 in(6)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 5.351 mm(2)
    • 5.4 mm(1)
    • 5.801 mm(3)
    • 7.0 mm(3)
    • 7.5 mm(1)
    • 8.5 mm(1)
    • 8.8 mm(4)
    • 8.9 mm(2)
    • 9.0 mm(1)
    • 10.5 mm(11)
    • 10.675 mm(6)
    • 14.0 mm(11)
    • 14.226 mm(1)
    • 18.0 mm(12)
    • 18.026 mm(4)
    • 22.401 mm(7)
    • 22.6 mm(4)
    • 28.6 mm(6)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • DMB-BALL NOSE (76)
    • DMT-TOROIDAL (50)
    Cutting Tool Material
    Cutting Tool Material
    • H W (126)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (94)
    • SCREW-ON (7)
    Back-End Diameter
    Back-End Diameter
    • 6.0 mm(3)
    • 6.351 mm(2)
    • 8.0 mm(3)
    • 9.525 mm(4)
    • 10.0 mm(6)
    • 12.0 mm(12)
    • 12.701 mm(11)
    • 13.0 mm(4)
    • 15.875 mm(4)
    • 16.0 mm(11)
    • 18.0 mm(2)
    • 19.05 mm(7)
    • 20.0 mm(11)
    • 21.0 mm(1)
    • 25.0 mm(5)
    • 25.401 mm(7)
    • 31.75 mm(3)
    • 32.0 mm(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.237 in(3)
    • 0.25 in(2)
    • 0.315 in(3)
    • 0.375 in(4)
    • 0.394 in(6)
    • 0.473 in(12)
    • 0.5 in(11)
    • 0.512 in(4)
    • 0.625 in(4)
    • 0.63 in(11)
    • 0.709 in(2)
    • 0.75 in(7)
    • 0.787 in(11)
    • 0.828 in(1)
    • 0.984 in(5)
    • 1.0 in(7)
    • 1.25 in(3)
    • 1.26 in(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    KDMB용 인서트 • KDMB-LD
    (8)

    KDMB용 인서트 • KDMB-LD

    KDMT Flat Bottom and Back Draft Finishing End Mill • Necked End Mills • Cylindrical Shank • Steel • Inch
    (7)

    KDMT Flat Bottom and Back Draft Finishing End Mill • Necked End Mills • Cylindrical Shank • Steel • Inch

    KDMB • Ball Nose Finisher • Necked End Mills • Steel Shank • Inch
    (12)

    KDMB • Ball Nose Finisher • Necked End Mills • Steel Shank • Inch

    KDMB • Ball Nose Finisher • Necked End Mills • Carbide • Inch
    (12)

    KDMB • Ball Nose Finisher • Necked End Mills • Carbide • Inch

    KDMT 플랫바텀 및 백 드래프트 정삭 엔드밀 • 넥 엔드밀 • 원통형 섕크 • 초경 • 미터법
    (8)

    KDMT 플랫바텀 및 백 드래프트 정삭 엔드밀 • 넥 엔드밀 • 원통형 섕크 • 초경 • 미터법

    KDMT 플랫바텀 및 백 드래프트 정삭 엔드밀 • 넥 엔드밀 • 원통형 섕크 • 스틸 • 미터법
    (8)

    KDMT 플랫바텀 및 백 드래프트 정삭 엔드밀 • 넥 엔드밀 • 원통형 섕크 • 스틸 • 미터법

    KDMB 볼 노즈 정삭 공구 • 테이퍼 엔드밀 • 원통형 섕크 • 초경 • 미터법
    (9)

    KDMB 볼 노즈 정삭 공구 • 테이퍼 엔드밀 • 원통형 섕크 • 초경 • 미터법

    KDMB 볼 노즈 정삭 공구 • 테이퍼 엔드밀 • 원통형 섕크 • 스틸 • 미터법
    (6)

    KDMB 볼 노즈 정삭 공구 • 테이퍼 엔드밀 • 원통형 섕크 • 스틸 • 미터법

    KDMT Flat Bottom and Back Draft Finishing End Mill • Necked End Mills • Cylindrical Shank • Carbide • Inch
    (2)

    KDMT Flat Bottom and Back Draft Finishing End Mill • Necked End Mills • Cylindrical Shank • Carbide • Inch

    KDMB • Ball Nose Finisher • End Mills • Inch
    (5)

    KDMB • Ball Nose Finisher • End Mills • Inch

    KDMB 볼 노즈 정삭 공구 • 넥 엔드밀 • 원통형 섕크 • 스틸 • 미터법
    (10)

    KDMB 볼 노즈 정삭 공구 • 넥 엔드밀 • 원통형 섕크 • 스틸 • 미터법

    KDMB 볼 노즈 정삭 공구 • 스크류 온 엔드밀 • 미터법
    (4)

    KDMB 볼 노즈 정삭 공구 • 스크류 온 엔드밀 • 미터법

    KDMB용 인서트 • KDMT-HF
    (11)

    KDMB용 인서트 • KDMT-HF

    KDMB용 인서트 • KDMB-LD
    (7)

    KDMB용 인서트 • KDMB-LD

    KDMB용 인서트 • KDMB-HC
    (5)

    KDMB용 인서트 • KDMB-HC

    KDMT용 인서트 • KDMT-GN
    (15)

    KDMT용 인서트 • KDMT-GN

    문의 사항이 있으십니까?

    숙련된 직원들이 여러분을 도와드릴 준비가 되어 있습니다.

    추가 정보 요청
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk