환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Shoulder Mills

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1143)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1043)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1043)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1043)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1043)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1045)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1141)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1141)
    • M Stainless Steel (1114)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1114)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1114)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1114)
    • K Cast Iron (949)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(949)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(948)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(948)
    • N Non-Ferrous Materials (605)
      • N1
        Wrought Aluminum (605)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(604)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(604)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (118)
    • S High-Temp Alloys (1096)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1000)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1000)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1000)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1096)
    • H Hardened Materials (677)
      • H1
        Hardened Materials 44-48 HRC(677)
    1차 선택 선택
    • BR (62)
    • CN (383)
    • DE (383)
    • GB (219)
    • IN (78)
    • SG (154)
    • US (340)
    Applications
    Applications
    • Face MillingFace Milling (648)
    • PocketPocket (327)
    • Pocket HelicalPocket Helical (325)
    • Pocket MillingPocket Milling (355)
    • Profile MillingProfile Milling (32)
    • RampingRamping (351)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (109)
    • Shoulder MillingShoulder Milling (648)
    • Shoulder RoughingShoulder Roughing (415)
    • Shoulder Square EndShoulder Square End (567)
    • Slot MillingSlot Milling (383)
    • Slot SideSlot Side (47)
    • Slot Square EndSlot Square End (389)
    • Slot TSlot T (25)
    Cutting Diameter
    Cutting Diameter
    • 0.468 in(1)
    • 0.473 in(2)
    • 0.496 in(1)
    • 0.5 in(1)
    • 0.62 in(1)
    • 0.625 in(9)
    • 0.63 in(10)
    • 0.709 in(1)
    • 0.745 in(1)
    • 0.75 in(21)
    • 0.787 in(25)
    • 0.866 in(1)
    • 0.875 in(2)
    • 0.969 in(1)
    • 0.971 in(1)
    • 0.984 in(40)
    • 1.0 in(47)
    • 1.1 in(1)
    • 1.102 in(1)
    • 1.25 in(36)
    • 1.252 in(9)
    • 1.26 in(51)
    • 1.339 in(1)
    • 1.379 in(1)
    • 1.5 in(36)
    • 1.504 in(1)
    • 1.575 in(43)
    • 1.655 in(1)
    • 1.969 in(33)
    • 2.0 in(48)
    • 2.48 in(32)
    • 2.5 in(27)
    • 3.0 in(48)
    • 3.15 in(25)
    • 3.938 in(16)
    • 4.0 in(18)
    • 4.921 in(12)
    • 5.0 in(10)
    • 6.0 in(13)
    • 6.299 in(11)
    • 7.875 in(4)
    • 8.0 in(6)
    • 10.0 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 11.875 mm(1)
    • 12.0 mm(2)
    • 12.601 mm(1)
    • 12.701 mm(1)
    • 15.75 mm(1)
    • 15.875 mm(9)
    • 16.0 mm(10)
    • 18.0 mm(1)
    • 18.925 mm(1)
    • 19.05 mm(21)
    • 20.0 mm(25)
    • 22.0 mm(1)
    • 22.225 mm(2)
    • 24.6 mm(1)
    • 24.651 mm(1)
    • 25.0 mm(40)
    • 25.401 mm(47)
    • 27.951 mm(1)
    • 28.0 mm(1)
    • 31.75 mm(36)
    • 31.8 mm(9)
    • 32.0 mm(51)
    • 34.0 mm(1)
    • 35.0 mm(1)
    • 38.1 mm(36)
    • 38.2 mm(1)
    • 40.0 mm(43)
    • 42.0 mm(1)
    • 50.0 mm(33)
    • 50.801 mm(48)
    • 63.0 mm(32)
    • 63.5 mm(27)
    • 76.2 mm(48)
    • 80.0 mm(25)
    • 100.0 mm(16)
    • 101.601 mm(18)
    • 125.0 mm(12)
    • 127.0 mm(10)
    • 152.4 mm(13)
    • 160.0 mm(11)
    • 200.0 mm(4)
    • 203.201 mm(6)
    • 254.0 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 25.401 mm(1)
    • 38.1 mm(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.0 in(1)
    • 1.5 in(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.551 mm(4)
    • 6.575 mm(12)
    • 6.926 mm(2)
    • 6.95 mm(3)
    • 6.976 mm(2)
    • 9.15 mm(26)
    • 9.175 mm(14)
    • 9.675 mm(1)
    • 9.701 mm(2)
    • 9.726 mm(1)
    • 9.75 mm(3)
    • 9.775 mm(2)
    • 9.8 mm(1)
    • 9.826 mm(2)
    • 9.875 mm(15)
    • 9.9 mm(1)
    • 9.925 mm(4)
    • 9.951 mm(18)
    • 10.0 mm(2)
    • 10.025 mm(18)
    • 10.05 mm(12)
    • 10.076 mm(7)
    • 10.101 mm(10)
    • 10.25 mm(2)
    • 11.0 mm(63)
    • 12.125 mm(6)
    • 12.15 mm(35)
    • 14.0 mm(14)
    • 14.101 mm(6)
    • 14.201 mm(2)
    • 14.3 mm(11)
    • 14.4 mm(9)
    • 14.476 mm(6)
    • 14.5 mm(9)
    • 14.601 mm(15)
    • 14.701 mm(3)
    • 14.726 mm(6)
    • 15.5 mm(73)
    • 15.976 mm(2)
    • 16.0 mm(31)
    • 16.2 mm(2)
    • 16.401 mm(6)
    • 17.0 mm(3)
    • 17.401 mm(20)
    • 17.5 mm(4)
    • 17.6 mm(5)
    • 17.7 mm(7)
    • 17.8 mm(3)
    • 17.901 mm(4)
    • 18.0 mm(29)
    • 18.675 mm(3)
    • 18.8 mm(3)
    • 18.925 mm(3)
    • 26.901 mm(1)
    • 27.201 mm(1)
    • 27.3 mm(1)
    • 27.5 mm(1)
    • 27.6 mm(1)
    • 27.75 mm(2)
    • 27.776 mm(1)
    • 27.8 mm(2)
    • 35.926 mm(1)
    • 35.95 mm(1)
    • 36.0 mm(2)
    • 36.375 mm(3)
    • 39.901 mm(2)
    • 39.95 mm(2)
    • 40.401 mm(2)
    • 40.801 mm(2)
    • 40.95 mm(1)
    • 44.325 mm(4)
    • 44.776 mm(3)
    • 44.801 mm(2)
    • 50.875 mm(2)
    • 51.0 mm(1)
    • 52.801 mm(1)
    • 52.825 mm(1)
    • 52.85 mm(1)
    • 53.45 mm(1)
    • 53.5 mm(1)
    • 54.0 mm(1)
    • 54.1 mm(1)
    • 54.401 mm(3)
    • 54.426 mm(3)
    • 54.825 mm(1)
    • 57.0 mm(1)
    • 60.776 mm(1)
    • 61.0 mm(1)
    • 65.0 mm(2)
    • 70.95 mm(1)
    • 72.0 mm(1)
    • 77.051 mm(4)
    • 77.075 mm(1)
    • 77.525 mm(1)
    • 77.551 mm(1)
    • 78.351 mm(1)
    • 78.375 mm(3)
    • 80.0 mm(1)
    • 81.176 mm(1)
    • 81.2 mm(1)
    • 85.025 mm(1)
    • 86.075 mm(1)
    • 94.0 mm(2)
    • 100.0 mm(1)
    • 101.5 mm(1)
    • 101.625 mm(1)
    • 102.2 mm(3)
    • 102.226 mm(1)
    • 107.25 mm(2)
    • 107.275 mm(1)
    • 107.601 mm(3)
    • 110.0 mm(1)
    • 132.275 mm(3)
    • 132.9 mm(1)
    • 133.0 mm(1)
    • 133.675 mm(2)
    • 134.451 mm(1)
    • 184.851 mm(2)
    • 236.05 mm(2)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.258 in(4)
    • 0.259 in(12)
    • 0.273 in(2)
    • 0.274 in(3)
    • 0.275 in(2)
    • 0.36 in(26)
    • 0.361 in(14)
    • 0.381 in(1)
    • 0.382 in(2)
    • 0.383 in(1)
    • 0.384 in(3)
    • 0.385 in(2)
    • 0.386 in(1)
    • 0.387 in(2)
    • 0.389 in(15)
    • 0.39 in(1)
    • 0.391 in(4)
    • 0.392 in(18)
    • 0.394 in(2)
    • 0.395 in(18)
    • 0.396 in(12)
    • 0.397 in(7)
    • 0.398 in(10)
    • 0.404 in(2)
    • 0.433 in(63)
    • 0.478 in(6)
    • 0.479 in(35)
    • 0.551 in(14)
    • 0.555 in(6)
    • 0.559 in(2)
    • 0.564 in(11)
    • 0.568 in(9)
    • 0.571 in(6)
    • 0.572 in(9)
    • 0.576 in(15)
    • 0.579 in(3)
    • 0.58 in(6)
    • 0.61 in(73)
    • 0.629 in(2)
    • 0.63 in(31)
    • 0.638 in(2)
    • 0.646 in(6)
    • 0.669 in(3)
    • 0.685 in(20)
    • 0.69 in(4)
    • 0.694 in(5)
    • 0.698 in(7)
    • 0.702 in(3)
    • 0.705 in(4)
    • 0.709 in(29)
    • 0.735 in(3)
    • 0.74 in(3)
    • 0.745 in(3)
    • 1.059 in(1)
    • 1.071 in(1)
    • 1.075 in(1)
    • 1.083 in(1)
    • 1.087 in(1)
    • 1.093 in(2)
    • 1.094 in(3)
    • 1.414 in(1)
    • 1.415 in(1)
    • 1.417 in(2)
    • 1.432 in(3)
    • 1.571 in(2)
    • 1.573 in(2)
    • 1.591 in(2)
    • 1.606 in(2)
    • 1.612 in(1)
    • 1.745 in(4)
    • 1.764 in(5)
    • 2.003 in(2)
    • 2.008 in(1)
    • 2.079 in(1)
    • 2.08 in(1)
    • 2.081 in(1)
    • 2.104 in(1)
    • 2.106 in(1)
    • 2.126 in(1)
    • 2.13 in(1)
    • 2.142 in(3)
    • 2.144 in(3)
    • 2.158 in(1)
    • 2.244 in(1)
    • 2.394 in(1)
    • 2.402 in(1)
    • 2.559 in(2)
    • 2.793 in(1)
    • 2.835 in(1)
    • 3.035 in(5)
    • 3.052 in(1)
    • 3.053 in(1)
    • 3.085 in(1)
    • 3.086 in(3)
    • 3.15 in(1)
    • 3.196 in(1)
    • 3.197 in(1)
    • 3.347 in(1)
    • 3.39 in(1)
    • 3.701 in(2)
    • 3.938 in(1)
    • 3.996 in(1)
    • 4.001 in(1)
    • 4.024 in(3)
    • 4.025 in(1)
    • 4.222 in(2)
    • 4.223 in(1)
    • 4.236 in(3)
    • 4.331 in(1)
    • 5.208 in(3)
    • 5.232 in(1)
    • 5.236 in(1)
    • 5.263 in(2)
    • 5.293 in(1)
    • 7.279 in(2)
    • 9.294 in(2)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.709 in(1)
    • 0.75 in(1)
    • 0.787 in(4)
    • 0.8 in(1)
    • 0.972 in(1)
    • 0.984 in(8)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(8)
    • 1.053 in(2)
    • 1.1 in(12)
    • 1.102 in(15)
    • 1.22 in(1)
    • 1.239 in(1)
    • 1.249 in(2)
    • 1.25 in(16)
    • 1.26 in(14)
    • 1.341 in(1)
    • 1.379 in(4)
    • 1.393 in(1)
    • 1.417 in(2)
    • 1.47 in(1)
    • 1.5 in(9)
    • 1.536 in(4)
    • 1.564 in(2)
    • 1.574 in(2)
    • 1.575 in(108)
    • 1.589 in(2)
    • 1.6 in(7)
    • 1.614 in(2)
    • 1.625 in(2)
    • 1.688 in(1)
    • 1.693 in(5)
    • 1.73 in(1)
    • 1.732 in(7)
    • 1.75 in(56)
    • 1.752 in(5)
    • 1.772 in(5)
    • 1.79 in(1)
    • 1.811 in(2)
    • 1.879 in(2)
    • 1.889 in(1)
    • 1.891 in(2)
    • 1.901 in(2)
    • 1.929 in(9)
    • 1.967 in(1)
    • 1.969 in(86)
    • 1.97 in(1)
    • 2.0 in(31)
    • 2.091 in(2)
    • 2.126 in(3)
    • 2.188 in(1)
    • 2.189 in(1)
    • 2.23 in(2)
    • 2.25 in(27)
    • 2.253 in(1)
    • 2.362 in(2)
    • 2.375 in(8)
    • 2.38 in(18)
    • 2.4 in(2)
    • 2.48 in(27)
    • 2.5 in(9)
    • 2.559 in(4)
    • 2.625 in(1)
    • 2.677 in(1)
    • 2.75 in(3)
    • 2.953 in(11)
    • 2.992 in(1)
    • 3.0 in(7)
    • 3.15 in(3)
    • 3.346 in(1)
    • 3.5 in(8)
    • 3.543 in(1)
    • 3.688 in(1)
    • 3.74 in(5)
    • 3.75 in(4)
    • 3.858 in(1)
    • 4.0 in(3)
    • 4.033 in(1)
    • 4.055 in(1)
    • 4.173 in(1)
    • 4.187 in(1)
    • 4.188 in(1)
    • 4.25 in(3)
    • 4.252 in(3)
    • 4.437 in(1)
    • 4.5 in(2)
    • 4.529 in(2)
    • 4.561 in(1)
    • 4.686 in(2)
    • 4.882 in(2)
    • 5.0 in(4)
    • 5.404 in(1)
    • 5.421 in(1)
    • 5.63 in(1)
    • 5.664 in(3)
    • 6.11 in(1)
    • 6.152 in(1)
    • 6.496 in(1)
    • 7.655 in(2)
    • 9.592 in(2)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 18.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(4)
    • 20.326 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(8)
    • 25.076 mm(1)
    • 25.375 mm(1)
    • 25.401 mm(8)
    • 26.75 mm(2)
    • 27.951 mm(12)
    • 28.0 mm(15)
    • 31.0 mm(1)
    • 31.475 mm(1)
    • 31.725 mm(2)
    • 31.75 mm(16)
    • 32.0 mm(14)
    • 34.051 mm(1)
    • 35.0 mm(4)
    • 35.35 mm(1)
    • 36.0 mm(2)
    • 37.35 mm(1)
    • 38.1 mm(9)
    • 39.0 mm(4)
    • 39.725 mm(2)
    • 39.975 mm(2)
    • 40.0 mm(108)
    • 40.35 mm(2)
    • 40.651 mm(7)
    • 41.0 mm(2)
    • 41.276 mm(2)
    • 42.875 mm(1)
    • 43.0 mm(5)
    • 43.95 mm(1)
    • 44.0 mm(7)
    • 44.45 mm(56)
    • 44.5 mm(5)
    • 45.0 mm(5)
    • 45.475 mm(1)
    • 46.0 mm(2)
    • 47.725 mm(2)
    • 47.975 mm(1)
    • 48.0 mm(2)
    • 48.25 mm(2)
    • 49.0 mm(9)
    • 49.95 mm(1)
    • 50.0 mm(86)
    • 50.026 mm(1)
    • 50.801 mm(31)
    • 53.1 mm(2)
    • 54.0 mm(3)
    • 55.575 mm(1)
    • 55.6 mm(1)
    • 56.651 mm(2)
    • 57.151 mm(27)
    • 57.2 mm(1)
    • 60.0 mm(2)
    • 60.325 mm(8)
    • 60.45 mm(18)
    • 60.95 mm(2)
    • 63.0 mm(27)
    • 63.5 mm(9)
    • 65.0 mm(4)
    • 66.675 mm(1)
    • 68.0 mm(1)
    • 69.851 mm(3)
    • 75.0 mm(11)
    • 76.0 mm(1)
    • 76.2 mm(7)
    • 80.0 mm(3)
    • 85.0 mm(1)
    • 88.9 mm(8)
    • 90.0 mm(1)
    • 93.676 mm(1)
    • 95.0 mm(5)
    • 95.25 mm(4)
    • 98.0 mm(1)
    • 101.601 mm(3)
    • 102.426 mm(1)
    • 103.0 mm(1)
    • 106.0 mm(1)
    • 106.351 mm(1)
    • 106.375 mm(1)
    • 107.95 mm(3)
    • 108.0 mm(3)
    • 112.7 mm(1)
    • 114.301 mm(2)
    • 115.0 mm(2)
    • 115.851 mm(1)
    • 119.0 mm(1)
    • 119.025 mm(1)
    • 124.0 mm(2)
    • 127.0 mm(4)
    • 137.225 mm(1)
    • 137.701 mm(1)
    • 143.0 mm(1)
    • 143.875 mm(3)
    • 155.201 mm(1)
    • 156.25 mm(1)
    • 165.0 mm(1)
    • 194.425 mm(2)
    • 243.601 mm(2)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (650)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (2)
    • 2 Key & Socket Head Cap Screw (1)
    • A-Socket Head Cap Screw (257)
    • B-Cutter Retention Screw (25)
    • BTF (15)
    • C-Bolt Circle (14)
    • CV-Caterpillar V-Flange In (9)
    • HSK (5)
    • SHCS or RetScrw Or BoltCircle (8)
    • Screw-On Connection (57)
    • Straight-Cylindrical (149)
    • Weldon (108)
    Number of Flutes
    Number of Flutes
    • 1 (4)
    • 10 (16)
    • 11 (8)
    • 12 (15)
    • 14 (4)
    • 16 (8)
    • 18 (2)
    • 2 (103)
    • 22 (2)
    • 3 (140)
    • 4 (130)
    • 5 (97)
    • 6 (46)
    • 7 (26)
    • 8 (35)
    • 9 (14)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (119)
    • 2.0 (754)
    • 4.0 (649)
    • 8.0 (69)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.25 in(1)
    • 1.484 in(1)
    • 1.5 in(3)
    • 1.574 in(2)
    • 1.575 in(81)
    • 1.655 in(1)
    • 1.669 in(1)
    • 1.681 in(1)
    • 1.75 in(29)
    • 1.752 in(5)
    • 1.772 in(5)
    • 1.848 in(2)
    • 1.85 in(2)
    • 1.889 in(1)
    • 1.891 in(1)
    • 1.969 in(41)
    • 1.97 in(1)
    • 2.0 in(27)
    • 2.008 in(1)
    • 2.116 in(4)
    • 2.126 in(4)
    • 2.165 in(1)
    • 2.244 in(3)
    • 2.362 in(2)
    • 2.375 in(8)
    • 2.38 in(18)
    • 2.4 in(2)
    • 2.406 in(3)
    • 2.441 in(1)
    • 2.48 in(32)
    • 2.5 in(8)
    • 2.52 in(2)
    • 2.539 in(14)
    • 2.559 in(3)
    • 2.677 in(1)
    • 2.715 in(3)
    • 2.75 in(2)
    • 2.835 in(2)
    • 2.872 in(1)
    • 2.874 in(3)
    • 2.906 in(1)
    • 2.914 in(2)
    • 2.953 in(4)
    • 2.992 in(1)
    • 3.0 in(2)
    • 3.031 in(1)
    • 3.11 in(4)
    • 3.13 in(4)
    • 3.281 in(2)
    • 3.346 in(1)
    • 3.422 in(1)
    • 3.426 in(1)
    • 3.5 in(11)
    • 3.504 in(4)
    • 3.531 in(3)
    • 3.543 in(6)
    • 3.551 in(1)
    • 3.74 in(5)
    • 3.75 in(1)
    • 3.781 in(6)
    • 3.858 in(1)
    • 3.88 in(2)
    • 3.938 in(10)
    • 3.969 in(1)
    • 3.976 in(4)
    • 4.0 in(7)
    • 4.01 in(1)
    • 4.03 in(10)
    • 4.055 in(2)
    • 4.071 in(1)
    • 4.134 in(1)
    • 4.173 in(1)
    • 4.213 in(3)
    • 4.28 in(2)
    • 4.331 in(19)
    • 4.37 in(11)
    • 4.407 in(1)
    • 4.469 in(2)
    • 4.5 in(6)
    • 4.51 in(2)
    • 4.529 in(6)
    • 4.53 in(14)
    • 4.532 in(1)
    • 4.724 in(2)
    • 4.734 in(1)
    • 4.78 in(1)
    • 4.8 in(5)
    • 4.882 in(2)
    • 4.961 in(1)
    • 5.0 in(7)
    • 5.03 in(1)
    • 5.118 in(2)
    • 5.157 in(1)
    • 5.187 in(1)
    • 5.2 in(2)
    • 5.232 in(1)
    • 5.236 in(3)
    • 5.28 in(1)
    • 5.281 in(1)
    • 5.315 in(2)
    • 5.551 in(2)
    • 5.562 in(2)
    • 5.63 in(1)
    • 5.687 in(3)
    • 5.69 in(1)
    • 5.906 in(4)
    • 5.945 in(1)
    • 5.969 in(1)
    • 6.0 in(4)
    • 6.03 in(1)
    • 6.468 in(1)
    • 6.469 in(1)
    • 6.496 in(1)
    • 6.5 in(1)
    • 6.53 in(1)
    • 6.531 in(1)
    • 6.681 in(1)
    • 6.682 in(2)
    • 6.688 in(1)
    • 6.689 in(1)
    • 6.694 in(12)
    • 6.7 in(4)
    • 6.891 in(1)
    • 7.0 in(3)
    • 7.187 in(1)
    • 7.5 in(6)
    • 7.562 in(2)
    • 7.758 in(3)
    • 7.863 in(4)
    • 7.875 in(20)
    • 7.989 in(3)
    • 8.0 in(15)
    • 8.031 in(1)
    • 9.215 in(1)
    • 9.5 in(2)
    • 9.843 in(3)
    • 10.0 in(10)
    • 11.5 in(2)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 31.75 mm(1)
    • 37.7 mm(1)
    • 38.1 mm(3)
    • 39.975 mm(2)
    • 40.0 mm(81)
    • 42.0 mm(1)
    • 42.401 mm(1)
    • 42.7 mm(1)
    • 44.45 mm(29)
    • 44.5 mm(5)
    • 45.0 mm(5)
    • 46.95 mm(2)
    • 47.0 mm(2)
    • 47.95 mm(1)
    • 48.0 mm(1)
    • 50.0 mm(41)
    • 50.026 mm(1)
    • 50.801 mm(27)
    • 51.0 mm(1)
    • 53.75 mm(4)
    • 54.0 mm(4)
    • 55.0 mm(1)
    • 57.0 mm(3)
    • 60.0 mm(2)
    • 60.325 mm(8)
    • 60.45 mm(18)
    • 60.95 mm(2)
    • 61.1 mm(3)
    • 62.0 mm(1)
    • 63.0 mm(32)
    • 63.5 mm(8)
    • 64.0 mm(2)
    • 64.5 mm(14)
    • 65.0 mm(3)
    • 68.0 mm(1)
    • 68.95 mm(3)
    • 69.851 mm(2)
    • 72.0 mm(2)
    • 72.95 mm(1)
    • 73.0 mm(3)
    • 73.8 mm(1)
    • 74.0 mm(2)
    • 75.0 mm(4)
    • 76.0 mm(1)
    • 76.2 mm(2)
    • 76.95 mm(1)
    • 79.0 mm(4)
    • 79.5 mm(4)
    • 83.325 mm(2)
    • 85.0 mm(1)
    • 86.926 mm(1)
    • 87.0 mm(1)
    • 88.9 mm(11)
    • 89.0 mm(4)
    • 89.676 mm(3)
    • 90.0 mm(6)
    • 90.2 mm(1)
    • 95.0 mm(5)
    • 95.25 mm(1)
    • 96.0 mm(6)
    • 98.0 mm(1)
    • 98.551 mm(2)
    • 100.0 mm(10)
    • 100.801 mm(1)
    • 101.0 mm(4)
    • 101.601 mm(7)
    • 101.851 mm(1)
    • 102.351 mm(10)
    • 103.0 mm(2)
    • 103.4 mm(1)
    • 105.0 mm(1)
    • 106.0 mm(1)
    • 107.0 mm(3)
    • 108.7 mm(2)
    • 110.0 mm(19)
    • 111.0 mm(11)
    • 111.926 mm(1)
    • 113.5 mm(2)
    • 114.301 mm(6)
    • 114.551 mm(2)
    • 115.0 mm(5)
    • 115.025 mm(1)
    • 115.051 mm(14)
    • 115.101 mm(1)
    • 120.0 mm(2)
    • 120.25 mm(1)
    • 121.4 mm(1)
    • 121.926 mm(5)
    • 124.0 mm(2)
    • 126.0 mm(1)
    • 127.0 mm(7)
    • 127.75 mm(1)
    • 130.0 mm(2)
    • 131.0 mm(1)
    • 131.75 mm(1)
    • 132.076 mm(2)
    • 132.9 mm(1)
    • 133.0 mm(3)
    • 134.1 mm(1)
    • 134.125 mm(1)
    • 135.0 mm(2)
    • 141.0 mm(2)
    • 141.275 mm(2)
    • 143.0 mm(1)
    • 144.451 mm(3)
    • 144.525 mm(1)
    • 150.0 mm(4)
    • 151.0 mm(1)
    • 151.6 mm(1)
    • 152.4 mm(4)
    • 153.15 mm(1)
    • 164.25 mm(1)
    • 164.3 mm(1)
    • 165.0 mm(1)
    • 165.101 mm(1)
    • 165.851 mm(1)
    • 165.9 mm(1)
    • 169.701 mm(1)
    • 169.726 mm(2)
    • 169.875 mm(1)
    • 169.9 mm(1)
    • 170.0 mm(12)
    • 170.175 mm(4)
    • 175.0 mm(1)
    • 177.8 mm(3)
    • 182.55 mm(1)
    • 190.5 mm(6)
    • 192.076 mm(2)
    • 197.025 mm(3)
    • 199.726 mm(4)
    • 200.0 mm(20)
    • 202.925 mm(3)
    • 203.201 mm(15)
    • 204.0 mm(1)
    • 234.05 mm(1)
    • 241.3 mm(2)
    • 250.0 mm(3)
    • 254.0 mm(10)
    • 292.1 mm(2)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(3)
    • 0.008 in(225)
    • 0.012 in(32)
    • 0.016 in(649)
    • 0.031 in(876)
    • 0.039 in(121)
    • 0.047 in(670)
    • 0.049 in(32)
    • 0.061 in(61)
    • 0.063 in(606)
    • 0.064 in(78)
    • 0.066 in(32)
    • 0.078 in(122)
    • 0.079 in(395)
    • 0.083 in(32)
    • 0.094 in(403)
    • 0.095 in(154)
    • 0.103 in(33)
    • 0.122 in(291)
    • 0.125 in(201)
    • 0.126 in(56)
    • 0.13 in(32)
    • 0.157 in(327)
    • 0.161 in(33)
    • 0.187 in(137)
    • 0.189 in(96)
    • 0.197 in(85)
    • 0.206 in(32)
    • 0.237 in(10)
    • 0.244 in(32)
    • 0.249 in(40)
    • 0.25 in(156)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(3)
    • 0.2 mm(225)
    • 0.301 mm(32)
    • 0.4 mm(649)
    • 0.8 mm(876)
    • 1.0 mm(121)
    • 1.201 mm(670)
    • 1.25 mm(32)
    • 1.55 mm(61)
    • 1.6 mm(606)
    • 1.625 mm(78)
    • 1.675 mm(32)
    • 1.975 mm(122)
    • 2.0 mm(395)
    • 2.1 mm(32)
    • 2.375 mm(403)
    • 2.401 mm(154)
    • 2.6 mm(33)
    • 3.1 mm(291)
    • 3.176 mm(201)
    • 3.2 mm(56)
    • 3.301 mm(32)
    • 4.0 mm(327)
    • 4.101 mm(33)
    • 4.75 mm(137)
    • 4.801 mm(96)
    • 5.0 mm(85)
    • 5.2 mm(32)
    • 6.0 mm(10)
    • 6.2 mm(32)
    • 6.325 mm(40)
    • 6.351 mm(156)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(1382)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(1382)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • GH1 (46)
    • K313 (130)
    • KC410M (405)
    • KC422M (468)
    • KC510M (158)
    • KC520M (570)
    • KC522M (639)
    • KC525M (124)
    • KC715M (124)
    • KC725M (723)
    • KC735M (40)
    • KC792M (40)
    • KC915M (40)
    • KC920M (40)
    • KC925M (40)
    • KC935M (123)
    • KCK15 (612)
    • KCK20 (43)
    • KCK20B (612)
    • KCKP10 (118)
    • KCPK30 (682)
    • KCPM20 (526)
    • KCPM40 (663)
    • KCSM30 (526)
    • KCSM40 (699)
    • KD1410 (119)
    • KTPK20 (58)
    • KUC20M (40)
    • KUC30M (40)
    • KY1335 (40)
    • KY3500 (42)
    • MP91M (10)
    • SP6519 (15)
    • X00626 (41)
    • X500 (55)
    • X700 (7)
    Hand Of Tool
    Hand Of Tool
    • R (649)
    • R - Right Hand Helix/Flute (1)
    Wiper Insert
    Wiper Insert
    • N (733)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.008 (4)
    • 0.01 (3)
    • 0.011 (3)
    • 0.013 (6)
    • 0.016 (6)
    • 0.02 (3)
    • 0.021 (3)
    • 0.026 (7)
    • 0.041 (3)
    • 0.042 (3)
    • 0.5 (3)
    • 0.75 (4)
    • 0.9 (1)
    • 1.0 (5)
    • 1.2 (2)
    • 1.3 (4)
    • 1.5 (12)
    • 1.6 (1)
    • 1.7 (2)
    • 1.75 (1)
    • 1.9 (2)
    • 1.95 (1)
    • 2.0 (16)
    • 2.01 (1)
    • 2.1 (4)
    • 2.17 (1)
    • 2.5 (23)
    • 2.75 (12)
    • 2.8 (2)
    • 2.92 (1)
    • 2.97 (1)
    • 3.0 (8)
    • 3.25 (2)
    • 3.4 (6)
    • 3.5 (5)
    • 3.8 (5)
    • 4.0 (26)
    • 4.4 (2)
    • 4.5 (2)
    • 4.59 (1)
    • 4.6 (3)
    • 4.8 (14)
    • 5.0 (2)
    • 5.18 (2)
    • 5.2 (15)
    • 5.25 (1)
    • 5.3 (2)
    • 5.5 (4)
    • 5.8 (2)
    • 5.9 (2)
    • 6.0 (12)
    • 6.5 (10)
    • 6.8 (11)
    • 6.9 (5)
    • 7.2 (4)
    • 7.4 (9)
    • 7.5 (5)
    • 7.6 (1)
    • 7.8 (4)
    • 7.9 (1)
    • 8.0 (2)
    • 8.1 (1)
    • 8.2 (7)
    • 9.5 (8)
    • 9.8 (1)
    • 10.2 (4)
    • 10.4 (3)
    • 10.5 (7)
    • 10.7 (1)
    • 10.8 (7)
    • 10.9 (8)
    • 11.4 (5)
    • 11.5 (5)
    • 13.2 (1)
    • 13.4 (2)
    • 14.0 (1)
    • 14.5 (3)
    • 14.7 (2)
    • 16.6 (4)
    • 16.7 (6)
    • 17.3 (5)
    • 17.7 (1)
    • 18.0 (1)
    • 18.5 (2)
    • 25.0 (1)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • BOEING TAPER FLANGE (10)
    • SHELL MILL ADAPTER (33)
    Front End Type
    Front End Type
    • BTF - BTF (10)
    • FDA - Milling Cutter Arbor (33)
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (611)
    • L-RECTANGLE 90 (46)
    • L-RECTANGLE ON EDGE 90 (128)
    • S-SQUARE 90 (242)
    • X-PARALLELOGRAM 70 (348)
    • X-PARALLELOGRAM 75 (158)
    • X-RECTANGLE MILL 4 90 (291)
    • Z-PARALLELOGRAM 89.27 (46)
    Front End Style
    Front End Style
    • BTF01 Standard BTF (10)
    • FDA22 Transv Drive & SHCS (33)
    Gage Length
    Gage Length
    • 2.255 in(2)
    • 2.451 in(1)
    • 2.615 in(1)
    • 2.648 in(2)
    • 2.757 in(3)
    • 3.15 in(1)
    • 3.337 in(1)
    • 4.258 in(1)
    • 4.337 in(1)
    • 4.604 in(1)
    • 4.968 in(1)
    • 5.037 in(1)
    • 5.258 in(1)
    • 5.337 in(1)
    • 5.604 in(1)
    • 5.906 in(3)
    • 5.968 in(1)
    • 6.037 in(1)
    • 6.258 in(1)
    • 6.337 in(1)
    • 6.604 in(1)
    • 6.968 in(1)
    • 7.037 in(1)
    • 7.258 in(1)
    • 7.337 in(1)
    • 7.604 in(1)
    • 7.875 in(3)
    • 7.968 in(1)
    • 8.037 in(1)
    • 8.259 in(1)
    • 8.605 in(1)
    • 8.968 in(1)
    • 9.037 in(1)
    • 10.468 in(1)
    • 11.468 in(1)
    Gage Length
    Gage Length
    • 150 mm(3)
    • 200 mm(3)
    • 70 mm(3)
    • 80 mm(1)
    • 57.276 mm(2)
    • 62.25 mm(1)
    • 66.425 mm(1)
    • 67.226 mm(2)
    • 84.75 mm(1)
    • 108.15 mm(1)
    • 110.15 mm(1)
    • 116.95 mm(1)
    • 126.176 mm(1)
    • 127.95 mm(1)
    • 133.55 mm(1)
    • 135.55 mm(1)
    • 142.35 mm(1)
    • 151.576 mm(1)
    • 153.35 mm(1)
    • 158.951 mm(1)
    • 160.951 mm(1)
    • 167.75 mm(1)
    • 176.976 mm(1)
    • 178.75 mm(1)
    • 184.351 mm(1)
    • 186.351 mm(1)
    • 193.15 mm(1)
    • 202.375 mm(1)
    • 204.15 mm(1)
    • 209.75 mm(1)
    • 218.55 mm(1)
    • 227.775 mm(1)
    • 229.55 mm(1)
    • 265.875 mm(1)
    • 291.276 mm(1)
    Front End Size
    Front End Size
    • 0.75 in(6)
    • 0.866 in(2)
    • 1.0 in(11)
    • 1.063 in(2)
    • 1.25 in(5)
    • 1.26 in(2)
    • 1.5 in(5)
    Front End Size Min받는 사람Front End Size Max
    Front End Size
    Front End Size
    • 19.05 mm(6)
    • 22.0 mm(2)
    • 25.401 mm(11)
    • 27.0 mm(2)
    • 31.75 mm(5)
    • 32.0 mm(2)
    • 38.1 mm(5)
    Front End Size Min받는 사람Front End Size Max
    Neck Diameter
    Neck Diameter
    • 0.414 in(1)
    • 0.455 in(1)
    • 0.586 in(1)
    • 0.595 in(1)
    • 0.704 in(1)
    • 0.728 in(1)
    • 0.74 in(2)
    • 0.852 in(1)
    • 0.866 in(4)
    • 0.882 in(9)
    • 0.906 in(1)
    • 0.929 in(1)
    • 0.946 in(1)
    • 0.961 in(1)
    • 0.984 in(1)
    • 1.133 in(9)
    • 1.137 in(1)
    • 1.143 in(5)
    • 1.159 in(3)
    • 1.176 in(2)
    • 1.177 in(1)
    • 1.18 in(1)
    • 1.185 in(2)
    • 1.211 in(1)
    • 1.22 in(6)
    • 1.23 in(1)
    • 1.24 in(10)
    • 1.383 in(9)
    • 1.43 in(1)
    • 1.457 in(7)
    • 1.48 in(1)
    • 1.555 in(1)
    • 1.843 in(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 10.5 mm(1)
    • 11.55 mm(1)
    • 14.875 mm(1)
    • 15.101 mm(1)
    • 17.85 mm(1)
    • 18.5 mm(1)
    • 18.8 mm(2)
    • 21.651 mm(1)
    • 22.0 mm(4)
    • 22.401 mm(9)
    • 23.0 mm(1)
    • 23.6 mm(1)
    • 24.0 mm(1)
    • 24.401 mm(1)
    • 25.0 mm(1)
    • 28.75 mm(9)
    • 28.875 mm(1)
    • 29.0 mm(5)
    • 29.451 mm(3)
    • 29.875 mm(2)
    • 29.901 mm(1)
    • 29.975 mm(1)
    • 30.1 mm(2)
    • 30.75 mm(1)
    • 31.0 mm(6)
    • 31.25 mm(1)
    • 31.5 mm(10)
    • 35.1 mm(9)
    • 36.325 mm(1)
    • 37.0 mm(7)
    • 37.6 mm(1)
    • 39.5 mm(1)
    • 46.801 mm(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • E-PARALLELOGRAM 70 (293)
    • L-RECTANGLE 90 (5)
    • L-RECTANGLE ON EDGE 90 (87)
    • S-SQUARE 90 (125)
    • X-PARALLELOGRAM 70 (30)
    • X-PARALLELOGRAM 75 (22)
    • X-RECTANGLE MILL 4 90 (156)
    • Z-PARALLELOGRAM 89.27 (15)
    Insert IC Size
    Insert IC Size
    • 9.525 mm(9)
    • 10.0 mm(39)
    • 12.701 mm(77)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.375 in(9)
    • 0.394 in(39)
    • 0.5 in(77)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 7.125 mm(5)
    • 9.525 mm(9)
    • 10.0 mm(39)
    • 10.025 mm(4)
    • 10.101 mm(3)
    • 10.201 mm(4)
    • 10.351 mm(64)
    • 10.451 mm(10)
    • 10.476 mm(41)
    • 12.101 mm(20)
    • 12.175 mm(37)
    • 12.701 mm(77)
    • 14.851 mm(4)
    • 15.25 mm(9)
    • 15.275 mm(49)
    • 15.3 mm(6)
    • 16.151 mm(19)
    • 16.25 mm(2)
    • 16.375 mm(7)
    • 16.401 mm(5)
    • 16.45 mm(1)
    • 16.901 mm(27)
    • 16.925 mm(5)
    • 17.0 mm(48)
    • 17.1 mm(1)
    • 17.151 mm(2)
    • 17.425 mm(6)
    • 17.7 mm(3)
    • 17.8 mm(2)
    • 18.0 mm(45)
    • 18.125 mm(1)
    • 18.25 mm(2)
    • 18.425 mm(7)
    • 18.45 mm(3)
    • 18.6 mm(12)
    • 18.625 mm(19)
    • 18.651 mm(4)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.281 in(5)
    • 0.375 in(9)
    • 0.394 in(39)
    • 0.395 in(4)
    • 0.398 in(3)
    • 0.402 in(4)
    • 0.409 in(64)
    • 0.412 in(10)
    • 0.413 in(41)
    • 0.477 in(20)
    • 0.48 in(37)
    • 0.5 in(77)
    • 0.585 in(4)
    • 0.6 in(9)
    • 0.601 in(49)
    • 0.602 in(6)
    • 0.636 in(19)
    • 0.64 in(2)
    • 0.645 in(7)
    • 0.646 in(5)
    • 0.648 in(1)
    • 0.665 in(27)
    • 0.666 in(5)
    • 0.669 in(48)
    • 0.673 in(1)
    • 0.675 in(2)
    • 0.686 in(6)
    • 0.698 in(3)
    • 0.702 in(2)
    • 0.709 in(45)
    • 0.714 in(1)
    • 0.719 in(2)
    • 0.725 in(7)
    • 0.726 in(3)
    • 0.732 in(12)
    • 0.733 in(19)
    • 0.734 in(4)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 41 (7)
    • 422 (6)
    • 423 (5)
    • 721 (15)
    • GB2 (52)
    • GD (106)
    • GDH (18)
    • GE (249)
    • GEH (1)
    • GEM (34)
    • GN (2)
    • HD (124)
    • LD (83)
    • LD2 (11)
    • LE (7)
    • LEH (3)
    • PU (6)
    Cutting Tool Material
    Cutting Tool Material
    • C N (2)
    • D P (2)
    • H T (2)
    • H W (726)
    Tolerance Class
    Tolerance Class
    • C (180)
    • E (48)
    • G (190)
    • H (32)
    • M (9)
    • P (274)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (257)
    • FLANGE ADAPTER (15)
    • SCREW-ON (57)
    • SHELL MILL (307)
    • TAPER SHANK (14)
    System Size
    System Size
    • BT50 (1)
    • BTF46 (48)
    • CV40 (9)
    • CV50 (1)
    • CV50F (1)
    • CV60F (1)
    • DV50 (1)
    • HSK100A (3)
    • HSK125A (2)
    • HSK63A (4)
    • KM4X100 (1)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(1)
    • 12.701 mm(7)
    • 13.0 mm(4)
    • 15.875 mm(7)
    • 16.0 mm(22)
    • 18.0 mm(8)
    • 19.0 mm(7)
    • 19.05 mm(71)
    • 19.1 mm(7)
    • 20.0 mm(21)
    • 21.0 mm(14)
    • 22.0 mm(48)
    • 25.0 mm(34)
    • 25.401 mm(86)
    • 27.0 mm(32)
    • 29.0 mm(31)
    • 31.701 mm(14)
    • 31.75 mm(56)
    • 32.0 mm(79)
    • 38.1 mm(27)
    • 40.0 mm(25)
    • 44.45 mm(9)
    • 46.026 mm(31)
    • 50.801 mm(9)
    • 60.0 mm(4)
    • 63.0 mm(4)
    • 63.5 mm(6)
    • 63.526 mm(1)
    • 69.851 mm(4)
    • 100.0 mm(4)
    • 107.95 mm(1)
    • 125.0 mm(2)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(1)
    • 0.5 in(7)
    • 0.512 in(4)
    • 0.625 in(7)
    • 0.63 in(22)
    • 0.709 in(8)
    • 0.748 in(7)
    • 0.75 in(71)
    • 0.752 in(7)
    • 0.787 in(21)
    • 0.828 in(14)
    • 0.866 in(48)
    • 0.984 in(34)
    • 1.0 in(86)
    • 1.063 in(32)
    • 1.143 in(31)
    • 1.248 in(14)
    • 1.25 in(56)
    • 1.26 in(79)
    • 1.5 in(27)
    • 1.575 in(25)
    • 1.75 in(9)
    • 1.812 in(31)
    • 2.0 in(9)
    • 2.362 in(4)
    • 2.48 in(4)
    • 2.5 in(6)
    • 2.501 in(1)
    • 2.75 in(4)
    • 3.938 in(4)
    • 4.25 in(1)
    • 4.921 in(2)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    Mill 1-10™
    (255)

    Mill 1-10™

    Mill 1-14™
    (218)

    Mill 1-14™

    Mill 1-18™
    (186)

    Mill 1-18™

    Mill 4-15™
    (171)

    Mill 4-15™

    Mill 4™-12KT
    (133)

    Mill 4™-12KT

    HARVI™ Ultra 8X
    (125)

    HARVI™ Ultra 8X

    Mill 4-11™
    (120)

    Mill 4-11™

    KSSM 0° • IC 12mm
    (86)

    KSSM 0° • IC 12mm

    5720VZD 알루미늄 • IC 16 • Stellram
    (46)

    5720VZD 알루미늄 • IC 16 • Stellram

    KSSM 0° • IC 10mm
    (45)

    KSSM 0° • IC 10mm

    5230 Series • Two Cutting Edges • Ap1 max 133mm
    (29)

    5230 Series • Two Cutting Edges • Ap1 max 133mm

    Mill 1-7™
    (12)

    Mill 1-7™

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?