환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Cutters Mill 1-18™ • Inch

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (50)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(50)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(50)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(50)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(50)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(50)
    • M Stainless Steel (50)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(50)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(50)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(50)
    • K Cast Iron (50)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(50)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(50)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(50)
    • N Non-Ferrous Materials (50)
      • N1
        Wrought Aluminum (50)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(50)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(50)
    • S High-Temp Alloys (50)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(50)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(50)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(50)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(50)
    • H Hardened Materials (50)
      • H1
        Hardened Materials 44-48 HRC(50)
    Applications
    Applications
    • Face MillingFace Milling (51)
    • PocketPocket (47)
    • Pocket HelicalPocket Helical (47)
    • Pocket MillingPocket Milling (47)
    • RampingRamping (47)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (4)
    • Shoulder MillingShoulder Milling (51)
    • Shoulder RoughingShoulder Roughing (7)
    • Shoulder Square EndShoulder Square End (47)
    • Slot MillingSlot Milling (38)
    • Slot Square EndSlot Square End (38)
    Cutting Diameter
    Cutting Diameter
    • 0.969 in(1)
    • 1.0 in(9)
    • 1.252 in(9)
    • 1.5 in(8)
    • 1.504 in(1)
    • 2.0 in(8)
    • 2.5 in(3)
    • 3.0 in(6)
    • 4.0 in(2)
    • 5.0 in(1)
    • 6.0 in(2)
    • 8.0 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 24.6 mm(1)
    • 25.401 mm(9)
    • 31.8 mm(9)
    • 38.1 mm(8)
    • 38.2 mm(1)
    • 50.801 mm(8)
    • 63.5 mm(3)
    • 76.2 mm(6)
    • 101.601 mm(2)
    • 127.0 mm(1)
    • 152.4 mm(2)
    • 203.201 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 15.976 mm(2)
    • 16.2 mm(2)
    • 16.401 mm(6)
    • 17.401 mm(6)
    • 17.5 mm(4)
    • 17.6 mm(3)
    • 17.7 mm(5)
    • 17.901 mm(4)
    • 18.0 mm(19)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.629 in(2)
    • 0.638 in(2)
    • 0.646 in(6)
    • 0.685 in(6)
    • 0.69 in(4)
    • 0.694 in(3)
    • 0.698 in(5)
    • 0.705 in(4)
    • 0.709 in(19)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 1.575 in(10)
    • 1.625 in(1)
    • 1.688 in(1)
    • 1.75 in(4)
    • 1.752 in(5)
    • 2.0 in(7)
    • 2.188 in(1)
    • 2.189 in(1)
    • 2.25 in(4)
    • 2.253 in(1)
    • 2.5 in(1)
    • 2.625 in(1)
    • 3.0 in(2)
    • 3.688 in(1)
    • 3.75 in(3)
    • 4.187 in(1)
    • 4.188 in(1)
    • 4.25 in(3)
    • 4.252 in(3)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 40.0 mm(10)
    • 41.276 mm(1)
    • 42.875 mm(1)
    • 44.45 mm(4)
    • 44.5 mm(5)
    • 50.801 mm(7)
    • 55.575 mm(1)
    • 55.6 mm(1)
    • 57.151 mm(4)
    • 57.2 mm(1)
    • 63.5 mm(1)
    • 66.675 mm(1)
    • 76.2 mm(2)
    • 93.676 mm(1)
    • 95.25 mm(3)
    • 106.351 mm(1)
    • 106.375 mm(1)
    • 107.95 mm(3)
    • 108.0 mm(3)
    Reach Min받는 사람Reach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (21)
    • C-Bolt Circle (1)
    • CV-Caterpillar V-Flange In (6)
    • Straight-Cylindrical (6)
    • Weldon (17)
    Number of Flutes
    Number of Flutes
    • 12 (1)
    • 2 (12)
    • 3 (16)
    • 4 (7)
    • 5 (6)
    • 6 (2)
    • 7 (3)
    • 8 (3)
    • 9 (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (50)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(10)
    • 1.75 in(1)
    • 1.752 in(5)
    • 2.0 in(5)
    • 2.5 in(1)
    • 3.781 in(1)
    • 3.969 in(1)
    • 4.03 in(2)
    • 4.469 in(2)
    • 4.53 in(4)
    • 4.532 in(1)
    • 5.187 in(1)
    • 5.562 in(2)
    • 5.969 in(1)
    • 6.03 in(1)
    • 6.468 in(1)
    • 6.469 in(1)
    • 6.53 in(1)
    • 6.531 in(1)
    • 7.187 in(1)
    • 7.562 in(2)
    • 8.0 in(3)
    • 10.0 in(3)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(10)
    • 44.45 mm(1)
    • 44.5 mm(5)
    • 50.801 mm(5)
    • 63.5 mm(1)
    • 96.0 mm(1)
    • 100.801 mm(1)
    • 102.351 mm(2)
    • 113.5 mm(2)
    • 115.051 mm(4)
    • 115.101 mm(1)
    • 131.75 mm(1)
    • 141.275 mm(2)
    • 151.6 mm(1)
    • 153.15 mm(1)
    • 164.25 mm(1)
    • 164.3 mm(1)
    • 165.851 mm(1)
    • 165.9 mm(1)
    • 182.55 mm(1)
    • 192.076 mm(2)
    • 203.201 mm(3)
    • 254.0 mm(3)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(49)
    • 0.031 in(49)
    • 0.047 in(49)
    • 0.063 in(49)
    • 0.079 in(49)
    • 0.094 in(49)
    • 0.095 in(49)
    • 0.125 in(50)
    • 0.157 in(50)
    • 0.187 in(50)
    • 0.189 in(50)
    • 0.197 in(50)
    • 0.25 in(50)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(49)
    • 0.8 mm(49)
    • 1.201 mm(49)
    • 1.6 mm(49)
    • 2.0 mm(49)
    • 2.375 mm(49)
    • 2.401 mm(49)
    • 3.176 mm(50)
    • 4.0 mm(50)
    • 4.75 mm(50)
    • 4.801 mm(50)
    • 5.0 mm(50)
    • 6.351 mm(50)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(50)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(50)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (50)
    • KC422M (50)
    • KC520M (50)
    • KC522M (50)
    • KC525M (50)
    • KC715M (50)
    • KC725M (50)
    • KC935M (49)
    • KCK15 (49)
    • KCK20B (50)
    • KCPK30 (50)
    • KCPM20 (50)
    • KCPM40 (50)
    • KCSM30 (50)
    • KCSM40 (50)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.0 (1)
    • 1.3 (2)
    • 1.6 (1)
    • 2.1 (2)
    • 3.0 (4)
    • 3.8 (3)
    • 5.2 (7)
    • 5.5 (1)
    • 7.5 (2)
    • 8.2 (7)
    • 10.9 (7)
    • 13.4 (2)
    • 14.0 (1)
    • 16.7 (6)
    • 17.7 (1)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (50)
    • X-PARALLELOGRAM 70 (50)
    Neck Diameter
    Neck Diameter
    • 0.852 in(1)
    • 0.882 in(9)
    • 1.133 in(9)
    • 1.383 in(9)
    • 1.843 in(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 21.651 mm(1)
    • 22.401 mm(9)
    • 28.75 mm(9)
    • 35.1 mm(9)
    • 46.801 mm(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (23)
    • SHELL MILL (22)
    • TAPER SHANK (6)
    System Size
    System Size
    • CV40 (6)
    Back-End Diameter
    Back-End Diameter
    • 19.0 mm(1)
    • 19.05 mm(10)
    • 25.401 mm(14)
    • 31.701 mm(14)
    • 38.1 mm(4)
    • 44.45 mm(6)
    • 50.801 mm(1)
    • 63.526 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.748 in(1)
    • 0.75 in(10)
    • 1.0 in(14)
    • 1.248 in(14)
    • 1.5 in(4)
    • 1.75 in(6)
    • 2.0 in(1)
    • 2.501 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    Mill 1-18™ • End Mill • Reduced Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch
    (2)

    Mill 1-18™ • End Mill • Reduced Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch

    Mill 1-18™ • Shell Mill • For Machining of Aluminum • Inch
    (3)

    Mill 1-18™ • Shell Mill • For Machining of Aluminum • Inch

    Mill 1-18™ • End Mill • Cylindrical Shank • Inch
    (6)

    Mill 1-18™ • End Mill • Cylindrical Shank • Inch

    Mill 1-18™ • End Mill • Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch
    (4)

    Mill 1-18™ • End Mill • Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch

    Mill 1-18™ • End Mill • Weldon Shank • Inch
    (5)

    Mill 1-18™ • End Mill • Weldon Shank • Inch

    Mill 1-18™ • Shell Mill • Inch
    (15)

    Mill 1-18™ • Shell Mill • Inch

    Mill 1-18™ • End Mill • Steep Taper CV40 • Inch
    (6)

    Mill 1-18™ • End Mill • Steep Taper CV40 • Inch

    Mill 1-18™ • End Mill • Reduced Weldon Shank • Inch
    (6)

    Mill 1-18™ • End Mill • Reduced Weldon Shank • Inch

    Mill 1-18™ • Shell Mill • For corner radii from 0.125" (3.2mm) to .25" (6.4mm) • Inch
    (4)

    Mill 1-18™ • Shell Mill • For corner radii from 0.125" (3.2mm) to .25" (6.4mm) • Inch

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?