환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기
너무 늦기 전에 독점적인 혜택을 누리세요! 特別オファー

외경 나사 선삭

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1185)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1185)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1185)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1185)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1185)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1185)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1185)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1185)
    • M Stainless Steel (1185)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1185)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1185)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1185)
    • K Cast Iron (1066)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1066)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1066)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1066)
    • N Non-Ferrous Materials (601)
      • N1
        Wrought Aluminum (601)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(566)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(75)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (601)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (566)
      • N6
        Carbon, Graphite Composites, CFRP (566)
      • N7
        MMC's (16)
    • S High-Temp Alloys (1178)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1178)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1178)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1178)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1178)
    • H Hardened Materials (362)
      • H1
        Hardened Materials 44-48 HRC(362)
      • H2
        Hardened Materials 48-55 HRC(263)
      • H3
        Hardened Materials 56-60 HRC(106)
      • H4
        Hardened Materials >60 HRC(106)
    1차 선택 선택
    • DE (63)
    • GB (41)
    • SG (36)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (4)
    • Cut-OffCut-Off (4)
    • Deep GroovingDeep Grooving (4)
    • Face GroovingFace Grooving (191)
    • FacingFacing (4)
    • GroovingGrooving (134)
    • ID GroovingID Grooving (69)
    • ID Thread TurningID Thread Turning (681)
    • Multiple Direction CuttingMultiple Direction Cutting (4)
    • OD Thread TurningOD Thread Turning (924)
    • Plunge TurningPlunge Turning (4)
    • ProfilingProfiling (4)
    • ThreadingThreading (205)
    • TurningTurning (4)
    Type of Thread
    Type of Thread
    • 55 (106)
    • 60 (449)
    • ACME (271)
    • API (149)
    • API BUTTRESS (29)
    • API RD (147)
    • BSPT (58)
    • BSW (217)
    • BUTTRESS (208)
    • M (254)
    • NPT (169)
    • NPTF (58)
    • RD DIN 405 (81)
    • STUB ACME (191)
    • TR DIN 103 (110)
    • UN (508)
    • UNJ (254)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (191)
    • Lightly Interrupted Cut (191)
    • Smooth Cut (192)
    • Varying Depth of Cut (192)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (325)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (7)
    • Boring Bar Shank (115)
    • KM (17)
    • Toolholder (147)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (190)
    • 2.0 (727)
    • 3.0 (492)
    • 4.0 (5)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.1811 in(17)
    • 1.625 in(7)
    • 2.1654 in(1)
    • 2.1917 in(1)
    • 2.3622 in(1)
    • 2.5 in(4)
    • 2.756 in(2)
    • 3.15 in(2)
    • 3.25 in(2)
    • 3.3465 in(2)
    • 3.5 in(4)
    • 3.937 in(8)
    • 3.94 in(2)
    • 4.0 in(3)
    • 4.5 in(14)
    • 4.921 in(9)
    • 4.9213 in(5)
    • 5.0 in(25)
    • 5.905 in(1)
    • 5.9055 in(13)
    • 5.906 in(18)
    • 5.996 in(1)
    • 6.0 in(55)
    • 6.06 in(1)
    • 6.1 in(2)
    • 6.11 in(2)
    • 6.6929 in(5)
    • 6.693 in(10)
    • 6.89 in(4)
    • 7.0 in(13)
    • 7.079 in(2)
    • 7.0866 in(10)
    • 7.087 in(1)
    • 7.874 in(9)
    • 7.93 in(1)
    • 7.976 in(1)
    • 8.0 in(7)
    • 8.058 in(2)
    • 8.082 in(1)
    • 9.8425 in(8)
    • 9.879 in(1)
    • 10.0 in(18)
    • 11.811 in(6)
    • 12.0 in(8)
    • 13.7795 in(1)
    • 14.0 in(7)
    • 16.0 in(8)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 30.0 mm(17)
    • 41.275 mm(7)
    • 55.0 mm(1)
    • 55.67 mm(1)
    • 60.0 mm(1)
    • 63.5 mm(4)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 82.55 mm(2)
    • 85.0 mm(2)
    • 88.9 mm(4)
    • 100.0 mm(10)
    • 101.6 mm(3)
    • 114.3 mm(14)
    • 125.0 mm(14)
    • 127.0 mm(25)
    • 150.0 mm(32)
    • 152.0 mm(2)
    • 152.29 mm(1)
    • 152.4 mm(52)
    • 153.0 mm(1)
    • 154.0 mm(2)
    • 155.0 mm(3)
    • 170.0 mm(15)
    • 175.0 mm(4)
    • 177.8 mm(11)
    • 178.0 mm(2)
    • 179.8 mm(2)
    • 180.0 mm(11)
    • 200.0 mm(9)
    • 201.422 mm(1)
    • 202.591 mm(1)
    • 203.19 mm(1)
    • 203.2 mm(6)
    • 204.673 mm(2)
    • 205.283 mm(1)
    • 250.0 mm(8)
    • 250.927 mm(1)
    • 254.0 mm(18)
    • 300.0 mm(6)
    • 304.8 mm(8)
    • 350.0 mm(1)
    • 355.6 mm(7)
    • 406.4 mm(8)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(18)
    • 0.002 in(144)
    • 0.003 in(338)
    • 0.004 in(225)
    • 0.005 in(86)
    • 0.006 in(157)
    • 0.007 in(244)
    • 0.008 in(252)
    • 0.009 in(84)
    • 0.01 in(179)
    • 0.011 in(95)
    • 0.012 in(83)
    • 0.013 in(123)
    • 0.014 in(120)
    • 0.016 in(77)
    • 0.017 in(23)
    • 0.018 in(107)
    • 0.019 in(33)
    • 0.02 in(149)
    • 0.021 in(24)
    • 0.023 in(107)
    • 0.026 in(3)
    • 0.028 in(17)
    • 0.03 in(72)
    • 0.031 in(139)
    • 0.032 in(5)
    • 0.035 in(106)
    • 0.036 in(9)
    • 0.038 in(1)
    • 0.039 in(155)
    • 0.047 in(139)
    • 0.049 in(45)
    • 0.059 in(139)
    • 0.062 in(63)
    • 0.063 in(178)
    • 0.069 in(45)
    • 0.078 in(63)
    • 0.079 in(64)
    • 0.089 in(4)
    • 0.094 in(102)
    • 0.098 in(22)
    • 0.125 in(39)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(18)
    • 0.05 mm(144)
    • 0.075 mm(338)
    • 0.1 mm(225)
    • 0.125 mm(86)
    • 0.15 mm(157)
    • 0.175 mm(244)
    • 0.2 mm(252)
    • 0.225 mm(84)
    • 0.25 mm(179)
    • 0.275 mm(95)
    • 0.3 mm(83)
    • 0.325 mm(123)
    • 0.35 mm(120)
    • 0.4 mm(77)
    • 0.425 mm(23)
    • 0.45 mm(107)
    • 0.475 mm(33)
    • 0.5 mm(149)
    • 0.525 mm(24)
    • 0.575 mm(107)
    • 0.65 mm(3)
    • 0.7 mm(17)
    • 0.75 mm(72)
    • 0.775 mm(139)
    • 0.825 mm(5)
    • 0.9 mm(106)
    • 0.925 mm(9)
    • 0.975 mm(1)
    • 1.0 mm(155)
    • 1.2 mm(139)
    • 1.25 mm(45)
    • 1.5 mm(139)
    • 1.575 mm(63)
    • 1.6 mm(178)
    • 1.75 mm(45)
    • 1.975 mm(63)
    • 2.0 mm(64)
    • 2.25 mm(4)
    • 2.4 mm(102)
    • 2.5 mm(22)
    • 3.175 mm(39)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(917)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(917)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (185)
    • K420 (192)
    • K68 (224)
    • KB1630 (102)
    • KBH20 (32)
    • KC5010 (453)
    • KC5025 (757)
    • KC5410 (109)
    • KC720 (226)
    • KC730 (294)
    • KC850 (223)
    • KC9110 (21)
    • KCK20 (139)
    • KCK20B (178)
    • KCP10B (178)
    • KCP25B (178)
    • KCU10 (263)
    • KCU10B (194)
    • KCU25 (270)
    • KCU25B (180)
    • KD1425 (63)
    • KT315 (123)
    • PN120 (2)
    • THM (8)
    • TN6010 (11)
    • TN6025 (16)
    • TTS (2)
    • WU10HT (2)
    • WU10PT (5)
    • WU25PT (2)
    Hand Of Tool
    Hand Of Tool
    • L (116)
    • R (170)
    Wiper Insert
    Wiper Insert
    • N (1238)
    F Dimension
    F Dimension
    • 6.55 mm(1)
    • 6.553 mm(2)
    • 6.73 mm(1)
    • 7.0 mm(2)
    • 7.112 mm(4)
    • 7.3 mm(4)
    • 8.26 mm(1)
    • 8.89 mm(3)
    • 8.9 mm(2)
    • 9.52 mm(2)
    • 10.0 mm(1)
    • 10.3 mm(1)
    • 10.312 mm(1)
    • 10.785 mm(1)
    • 10.973 mm(4)
    • 11.0 mm(4)
    • 11.1 mm(2)
    • 11.3 mm(2)
    • 11.5 mm(2)
    • 11.684 mm(4)
    • 11.7 mm(1)
    • 12.0 mm(1)
    • 12.573 mm(3)
    • 12.7 mm(8)
    • 12.954 mm(4)
    • 13.0 mm(2)
    • 13.4 mm(3)
    • 14.0 mm(2)
    • 14.148 mm(3)
    • 14.27 mm(1)
    • 14.275 mm(3)
    • 15.6 mm(2)
    • 15.8 mm(1)
    • 15.875 mm(3)
    • 15.88 mm(2)
    • 16.0 mm(19)
    • 16.002 mm(2)
    • 16.1 mm(2)
    • 16.3 mm(2)
    • 16.51 mm(3)
    • 17.0 mm(4)
    • 17.2 mm(2)
    • 17.348 mm(2)
    • 17.4 mm(1)
    • 17.475 mm(2)
    • 17.48 mm(2)
    • 18.034 mm(3)
    • 19.05 mm(6)
    • 19.558 mm(1)
    • 20.0 mm(6)
    • 21.5 mm(2)
    • 21.59 mm(1)
    • 22.0 mm(8)
    • 22.225 mm(4)
    • 24.0 mm(2)
    • 25.0 mm(15)
    • 25.4 mm(20)
    • 25.8 mm(2)
    • 27.0 mm(4)
    • 28.575 mm(2)
    • 31.75 mm(27)
    • 32.0 mm(22)
    • 34.925 mm(4)
    • 35.0 mm(1)
    • 38.1 mm(16)
    • 38.887 mm(1)
    • 40.0 mm(7)
    • 41.275 mm(4)
    • 50.8 mm(4)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(3)
    • 0.265 in(1)
    • 0.276 in(2)
    • 0.28 in(4)
    • 0.2874 in(4)
    • 0.325 in(1)
    • 0.35 in(3)
    • 0.3504 in(2)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.4055 in(1)
    • 0.406 in(1)
    • 0.4281 in(1)
    • 0.432 in(4)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.4449 in(2)
    • 0.4528 in(2)
    • 0.46 in(4)
    • 0.463 in(1)
    • 0.472 in(1)
    • 0.495 in(3)
    • 0.5 in(8)
    • 0.51 in(4)
    • 0.512 in(2)
    • 0.5276 in(3)
    • 0.551 in(2)
    • 0.557 in(3)
    • 0.562 in(4)
    • 0.6142 in(2)
    • 0.622 in(1)
    • 0.625 in(5)
    • 0.6299 in(15)
    • 0.63 in(6)
    • 0.6339 in(2)
    • 0.6417 in(2)
    • 0.65 in(3)
    • 0.669 in(4)
    • 0.6772 in(2)
    • 0.683 in(2)
    • 0.685 in(1)
    • 0.688 in(4)
    • 0.71 in(3)
    • 0.75 in(6)
    • 0.77 in(1)
    • 0.787 in(2)
    • 0.7874 in(4)
    • 0.8465 in(2)
    • 0.85 in(1)
    • 0.8661 in(8)
    • 0.875 in(4)
    • 0.9449 in(2)
    • 0.984 in(4)
    • 0.9843 in(11)
    • 1.0 in(20)
    • 1.0157 in(2)
    • 1.063 in(4)
    • 1.125 in(2)
    • 1.25 in(27)
    • 1.2598 in(13)
    • 1.26 in(9)
    • 1.375 in(4)
    • 1.378 in(1)
    • 1.5 in(16)
    • 1.531 in(1)
    • 1.5748 in(3)
    • 1.575 in(4)
    • 1.625 in(4)
    • 2.0 in(4)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(87)
    • 11.176 mm(1)
    • 11.18 mm(1)
    • 11.181 mm(1)
    • 11.5 mm(2)
    • 12.19 mm(1)
    • 12.7 mm(4)
    • 13.0 mm(4)
    • 15.24 mm(1)
    • 16.0 mm(2)
    • 16.51 mm(3)
    • 17.0 mm(1)
    • 18.5 mm(2)
    • 18.542 mm(6)
    • 20.0 mm(5)
    • 20.32 mm(5)
    • 22.0 mm(3)
    • 22.86 mm(4)
    • 24.0 mm(3)
    • 25.4 mm(5)
    • 26.0 mm(2)
    • 27.0 mm(2)
    • 28.575 mm(4)
    • 28.58 mm(1)
    • 29.0 mm(5)
    • 30.48 mm(3)
    • 31.75 mm(3)
    • 32.0 mm(3)
    • 34.0 mm(4)
    • 34.92 mm(2)
    • 34.925 mm(4)
    • 36.83 mm(1)
    • 38.1 mm(5)
    • 39.0 mm(2)
    • 41.3 mm(31)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.0 mm(2)
    • 47.6 mm(31)
    • 50.0 mm(2)
    • 50.8 mm(2)
    • 54.0 mm(4)
    • 55.88 mm(3)
    • 56.625 mm(33)
    • 57.15 mm(1)
    • 57.2 mm(18)
    • 60.325 mm(2)
    • 63.5 mm(22)
    • 69.85 mm(4)
    • 70.0 mm(1)
    • 76.2 mm(8)
    • 76.962 mm(1)
    • 82.55 mm(4)
    • 88.9 mm(66)
    • 127.0 mm(1)
    • 139.7 mm(31)
    • 146.05 mm(3)
    • 174.6 mm(31)
    • 209.6 mm(20)
    • 222.3 mm(18)
    • 333.0 mm(3)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(87)
    • 0.44 in(2)
    • 0.4402 in(1)
    • 0.453 in(2)
    • 0.48 in(1)
    • 0.5 in(4)
    • 0.5118 in(4)
    • 0.6 in(1)
    • 0.6299 in(2)
    • 0.65 in(3)
    • 0.6693 in(1)
    • 0.728 in(2)
    • 0.73 in(6)
    • 0.787 in(1)
    • 0.7874 in(4)
    • 0.8 in(5)
    • 0.866 in(2)
    • 0.8661 in(1)
    • 0.9 in(4)
    • 0.9449 in(3)
    • 1.0 in(5)
    • 1.024 in(2)
    • 1.063 in(2)
    • 1.125 in(5)
    • 1.1417 in(5)
    • 1.2 in(3)
    • 1.25 in(3)
    • 1.2598 in(3)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.45 in(1)
    • 1.5 in(5)
    • 1.5354 in(2)
    • 1.626 in(31)
    • 1.7323 in(2)
    • 1.75 in(2)
    • 1.8504 in(2)
    • 1.874 in(31)
    • 1.9685 in(2)
    • 2.0 in(2)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(33)
    • 2.25 in(1)
    • 2.252 in(18)
    • 2.375 in(2)
    • 2.5 in(22)
    • 2.75 in(4)
    • 2.7559 in(1)
    • 3.0 in(8)
    • 3.03 in(1)
    • 3.25 in(4)
    • 3.5 in(66)
    • 5.0 in(1)
    • 5.5 in(31)
    • 5.75 in(3)
    • 6.874 in(31)
    • 8.252 in(20)
    • 8.752 in(18)
    • 13.11 in(3)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(192)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(192)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 7.0 (12)
    • 10.0 (3)
    • 14.5 (145)
    • 15.0 (12)
    • 27.0 (8)
    • 27.5 (58)
    • 30.0 (651)
    • 33.0 (8)
    • 45.0 (18)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (156)
    • S (130)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (105)
    • NEGATIVE-ZERO (23)
    • NEUTRAL (ZERO) (158)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.9843 in(2)
    • 1.0 in(12)
    • 1.231 in(1)
    • 1.235 in(1)
    • 1.25 in(2)
    • 1.2598 in(3)
    • 1.29 in(1)
    • 1.415 in(1)
    • 1.5 in(3)
    • 1.55 in(1)
    • 1.57 in(1)
    • 1.5748 in(3)
    • 1.85 in(1)
    • 1.88 in(2)
    • 2.0 in(26)
    • 2.25 in(2)
    • 2.3622 in(2)
    • 2.5 in(9)
    • 2.5196 in(2)
    • 2.52 in(2)
    • 3.0 in(6)
    • 3.125 in(1)
    • 3.1496 in(4)
    • 3.16 in(2)
    • 3.75 in(5)
    • 3.7758 in(1)
    • 3.7794 in(1)
    • 3.92 in(2)
    • 3.936 in(2)
    • 3.9372 in(4)
    • 4.0 in(4)
    • 4.5 in(4)
    • 4.7244 in(1)
    • 5.0 in(4)
    • 5.0392 in(5)
    • 5.9058 in(1)
    • 6.0 in(6)
    • 6.2992 in(6)
    • 7.0 in(3)
    • 7.874 in(1)
    • 8.0 in(6)
    • 9.0 in(1)
    • 10.0 in(8)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.0 mm(2)
    • 25.4 mm(12)
    • 31.26 mm(1)
    • 31.3 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 32.8 mm(1)
    • 35.94 mm(1)
    • 38.1 mm(3)
    • 39.5 mm(1)
    • 39.878 mm(1)
    • 40.0 mm(3)
    • 47.5 mm(1)
    • 48.0 mm(2)
    • 50.8 mm(26)
    • 57.15 mm(2)
    • 60.0 mm(2)
    • 63.48 mm(1)
    • 63.5 mm(8)
    • 64.0 mm(4)
    • 76.2 mm(6)
    • 79.375 mm(1)
    • 80.0 mm(6)
    • 95.25 mm(5)
    • 96.0 mm(2)
    • 100.0 mm(8)
    • 101.6 mm(4)
    • 114.3 mm(4)
    • 120.0 mm(1)
    • 127.0 mm(4)
    • 128.0 mm(5)
    • 150.0 mm(1)
    • 152.4 mm(6)
    • 160.0 mm(6)
    • 177.8 mm(3)
    • 200.0 mm(1)
    • 203.2 mm(6)
    • 228.6 mm(1)
    • 254.0 mm(8)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (21)
    • H (6)
    • S (95)
    frontEnd
    Clamp Style
    Clamp Style
    • C (60)
    • M (24)
    • N (198)
    • S (21)
    • Y (21)
    Cutting Width
    Cutting Width
    • 0.0197 in(76)
    • 0.031 in(84)
    • 0.0315 in(76)
    • 0.035 in(39)
    • 0.039 in(76)
    • 0.0394 in(139)
    • 0.041 in(76)
    • 0.047 in(147)
    • 0.0472 in(139)
    • 0.055 in(76)
    • 0.0551 in(76)
    • 0.058 in(76)
    • 0.0591 in(139)
    • 0.062 in(147)
    • 0.0669 in(76)
    • 0.067 in(76)
    • 0.0689 in(139)
    • 0.072 in(63)
    • 0.076 in(37)
    • 0.0768 in(76)
    • 0.077 in(37)
    • 0.078 in(63)
    • 0.0787 in(139)
    • 0.079 in(108)
    • 0.0866 in(139)
    • 0.088 in(139)
    • 0.0886 in(107)
    • 0.094 in(147)
    • 0.097 in(63)
    • 0.0984 in(139)
    • 0.105 in(63)
    • 0.108 in(76)
    • 0.1083 in(139)
    • 0.11 in(63)
    • 0.118 in(102)
    • 0.1181 in(178)
    • 0.122 in(63)
    • 0.125 in(178)
    • 0.126 in(102)
    • 0.1278 in(76)
    • 0.128 in(63)
    • 0.129 in(37)
    • 0.131 in(32)
    • 0.1378 in(143)
    • 0.142 in(63)
    • 0.147 in(39)
    • 0.151 in(76)
    • 0.156 in(63)
    • 0.157 in(63)
    • 0.1574 in(64)
    • 0.1575 in(102)
    • 0.167 in(39)
    • 0.1673 in(63)
    • 0.1771 in(7)
    • 0.1772 in(102)
    • 0.178 in(63)
    • 0.185 in(63)
    • 0.188 in(102)
    • 0.189 in(102)
    • 0.192 in(32)
    • 0.193 in(32)
    • 0.195 in(63)
    • 0.196 in(63)
    • 0.1969 in(39)
    • 0.197 in(21)
    • 0.213 in(39)
    • 0.2165 in(18)
    • 0.2166 in(21)
    • 0.2362 in(39)
    • 0.25 in(40)
    • 0.256 in(39)
    • 0.281 in(2)
    • 0.312 in(2)
    • 0.375 in(3)
    • 0.381 in(3)
    • 0.384 in(8)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(76)
    • 0.787 mm(84)
    • 0.8 mm(76)
    • 0.889 mm(39)
    • 0.991 mm(76)
    • 1.0 mm(139)
    • 1.041 mm(76)
    • 1.19 mm(107)
    • 1.194 mm(147)
    • 1.2 mm(139)
    • 1.39 mm(76)
    • 1.397 mm(39)
    • 1.4 mm(76)
    • 1.473 mm(76)
    • 1.5 mm(139)
    • 1.57 mm(100)
    • 1.575 mm(147)
    • 1.69 mm(39)
    • 1.7 mm(76)
    • 1.702 mm(76)
    • 1.75 mm(139)
    • 1.829 mm(63)
    • 1.94 mm(37)
    • 1.95 mm(76)
    • 1.956 mm(37)
    • 1.981 mm(63)
    • 2.0 mm(139)
    • 2.007 mm(76)
    • 2.2 mm(139)
    • 2.235 mm(102)
    • 2.236 mm(32)
    • 2.24 mm(76)
    • 2.25 mm(107)
    • 2.387 mm(32)
    • 2.388 mm(147)
    • 2.39 mm(31)
    • 2.464 mm(63)
    • 2.5 mm(139)
    • 2.667 mm(63)
    • 2.74 mm(37)
    • 2.743 mm(39)
    • 2.75 mm(139)
    • 2.794 mm(63)
    • 2.997 mm(102)
    • 3.0 mm(178)
    • 3.099 mm(63)
    • 3.17 mm(63)
    • 3.175 mm(178)
    • 3.18 mm(58)
    • 3.2 mm(102)
    • 3.245 mm(76)
    • 3.25 mm(63)
    • 3.251 mm(32)
    • 3.27 mm(37)
    • 3.32 mm(32)
    • 3.329 mm(32)
    • 3.5 mm(143)
    • 3.607 mm(63)
    • 3.73 mm(39)
    • 3.835 mm(39)
    • 3.84 mm(76)
    • 3.96 mm(63)
    • 3.962 mm(63)
    • 3.974 mm(32)
    • 3.988 mm(63)
    • 4.0 mm(102)
    • 4.242 mm(39)
    • 4.25 mm(63)
    • 4.5 mm(102)
    • 4.521 mm(63)
    • 4.699 mm(63)
    • 4.775 mm(102)
    • 4.78 mm(18)
    • 4.785 mm(18)
    • 4.788 mm(21)
    • 4.8 mm(63)
    • 4.801 mm(102)
    • 4.88 mm(32)
    • 4.9 mm(32)
    • 4.95 mm(63)
    • 4.953 mm(32)
    • 4.978 mm(63)
    • 5.0 mm(39)
    • 5.004 mm(21)
    • 5.41 mm(39)
    • 5.5 mm(39)
    • 6.0 mm(39)
    • 6.35 mm(40)
    • 6.36 mm(21)
    • 6.502 mm(39)
    • 7.137 mm(2)
    • 7.925 mm(2)
    • 9.525 mm(3)
    • 9.677 mm(3)
    • 9.754 mm(8)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Shape
    Insert Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (492)
    • TN-TOP NOTCH (748)
    Insert Size
    Insert Size
    • 1 (8)
    • 2 (49)
    • 3 (36)
    • 4 (19)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(11)
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.13 in(1)
    • 0.138 in(39)
    • 0.1382 in(1)
    • 0.21 in(39)
    • 0.24 in(2)
    • 0.25 in(2)
    • 0.294 in(23)
    • 0.3 in(1)
    • 0.334 in(4)
    • 0.415 in(2)
    • 0.4151 in(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(11)
    • 1.016 mm(1)
    • 1.6 mm(2)
    • 1.69 mm(1)
    • 1.78 mm(2)
    • 1.9 mm(1)
    • 3.3 mm(1)
    • 3.505 mm(21)
    • 3.51 mm(19)
    • 5.33 mm(16)
    • 5.334 mm(23)
    • 6.096 mm(2)
    • 6.35 mm(2)
    • 7.46 mm(8)
    • 7.468 mm(9)
    • 7.47 mm(6)
    • 7.62 mm(1)
    • 8.484 mm(4)
    • 10.54 mm(1)
    • 10.541 mm(1)
    • 10.543 mm(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Thread TPI
    Thread TPI
    • 2.0 (7)
    • 2.5 (2)
    • 3.0 (4)
    • 4.0 (39)
    • 5.0 (30)
    • 6.0 (36)
    • 7.0 (9)
    • 8.0 (69)
    • 9.0 (2)
    • 10.0 (32)
    • 11.0 (15)
    • 11.5 (12)
    • 12.0 (53)
    • 13.0 (2)
    • 14.0 (54)
    • 16.0 (70)
    • 18.0 (30)
    • 19.0 (5)
    • 20.0 (36)
    • 24.0 (28)
    • 27.0 (2)
    • 28.0 (18)
    • 32.0 (18)
    • 36.0 (1)
    • 40.0 (2)
    • 48.0 (29)
    Thread TPI Min받는 사람Thread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.35 mm(1)
    • 0.4 mm(1)
    • 0.5 mm(7)
    • 0.75 mm(7)
    • 0.8 mm(1)
    • 1.0 mm(13)
    • 1.25 mm(9)
    • 1.5 mm(33)
    • 1.75 mm(7)
    • 2.0 mm(19)
    • 2.5 mm(8)
    • 3.0 mm(32)
    • 3.5 mm(3)
    • 4.0 mm(4)
    • 4.5 mm(2)
    • 5.0 mm(10)
    • 6.25 mm(3)
    Thread Pitch Min받는 사람Thread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.35 in(1)
    • 0.4 in(1)
    • 0.5 in(7)
    • 0.75 in(7)
    • 0.8 in(1)
    • 1.0 in(13)
    • 1.25 in(9)
    • 1.5 in(33)
    • 1.75 in(7)
    • 2.0 in(19)
    • 2.5 in(8)
    • 3.0 in(32)
    • 3.5 in(3)
    • 4.0 in(4)
    • 4.5 in(2)
    • 5.0 in(10)
    • 6.25 in(3)
    Thread Pitch Min받는 사람Thread Pitch Max
    insertGeometry
    Shape
    Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (366)
    • TN-TOP NOTCH (549)
    Insert IC Size
    Insert IC Size
    • 4.0 mm(1)
    • 4.762 mm(3)
    • 5.0 mm(7)
    • 6.35 mm(44)
    • 9.525 mm(269)
    • 12.7 mm(41)
    • 15.875 mm(4)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.1575 in(1)
    • 0.1696 in(1)
    • 0.1875 in(3)
    • 0.1969 in(6)
    • 0.25 in(44)
    • 0.375 in(269)
    • 0.5 in(41)
    • 0.625 in(4)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 1 (6)
    • 11 (1)
    • 16 (3)
    • 2 (78)
    • 3 (379)
    • 4 (65)
    • 4U (3)
    • 6 (15)
    • 8 (11)
    Cutting Edge Length
    Cutting Edge Length
    • 6.928 mm(1)
    • 8.66 mm(7)
    • 11.0 mm(1)
    • 16.498 mm(3)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.2728 in(1)
    • 0.341 in(7)
    • 0.433 in(1)
    • 0.6495 in(3)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • B H (102)
    • B L (32)
    • D P (63)
    • H T (123)
    • H W (1240)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (115)
    • BORING BAR HEAD (7)
    • SQUARE SHANK (147)
    • TAPER SHANK (17)
    System Size
    System Size
    • KM25 (17)
    Back-End Diameter
    Back-End Diameter
    • 7.9 mm(1)
    • 9.5 mm(1)
    • 9.525 mm(3)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.7 mm(9)
    • 15.87 mm(1)
    • 15.875 mm(7)
    • 16.0 mm(6)
    • 19.05 mm(15)
    • 20.0 mm(14)
    • 25.0 mm(26)
    • 25.4 mm(8)
    • 31.75 mm(8)
    • 32.0 mm(7)
    • 38.1 mm(2)
    • 40.0 mm(6)
    • 44.45 mm(3)
    • 50.0 mm(1)
    • 50.8 mm(6)
    • 57.15 mm(1)
    • 63.5 mm(8)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.472 in(3)
    • 0.4724 in(2)
    • 0.5 in(8)
    • 0.5835 in(2)
    • 0.6067 in(2)
    • 0.625 in(8)
    • 0.6299 in(4)
    • 0.63 in(4)
    • 0.7409 in(11)
    • 0.75 in(16)
    • 0.7642 in(1)
    • 0.787 in(4)
    • 0.7874 in(7)
    • 0.9378 in(5)
    • 0.961 in(1)
    • 0.984 in(6)
    • 0.9843 in(15)
    • 1.0 in(28)
    • 1.2134 in(7)
    • 1.25 in(15)
    • 1.2598 in(9)
    • 1.26 in(7)
    • 1.5 in(4)
    • 1.5283 in(6)
    • 1.8488 in(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 9.52 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 12.0 mm(5)
    • 12.7 mm(8)
    • 14.82 mm(2)
    • 15.41 mm(2)
    • 15.875 mm(5)
    • 15.88 mm(3)
    • 16.0 mm(8)
    • 18.82 mm(11)
    • 19.05 mm(16)
    • 19.41 mm(1)
    • 20.0 mm(11)
    • 23.82 mm(5)
    • 24.41 mm(1)
    • 25.0 mm(21)
    • 25.4 mm(28)
    • 30.82 mm(7)
    • 31.75 mm(15)
    • 32.0 mm(16)
    • 38.1 mm(4)
    • 38.82 mm(6)
    • 46.96 mm(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.472 in(3)
    • 0.4724 in(2)
    • 0.5 in(8)
    • 0.625 in(8)
    • 0.6299 in(4)
    • 0.63 in(4)
    • 0.75 in(16)
    • 0.787 in(4)
    • 0.7874 in(8)
    • 0.8646 in(5)
    • 0.984 in(9)
    • 0.9843 in(14)
    • 1.0 in(28)
    • 1.1402 in(7)
    • 1.25 in(15)
    • 1.2598 in(9)
    • 1.26 in(4)
    • 1.4551 in(6)
    • 1.5 in(4)
    • 1.8488 in(1)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 9.52 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 12.0 mm(5)
    • 12.7 mm(8)
    • 15.875 mm(5)
    • 15.88 mm(3)
    • 16.0 mm(8)
    • 19.05 mm(16)
    • 20.0 mm(12)
    • 21.96 mm(5)
    • 25.0 mm(23)
    • 25.4 mm(28)
    • 28.96 mm(7)
    • 31.75 mm(15)
    • 32.0 mm(13)
    • 36.96 mm(6)
    • 38.1 mm(4)
    • 46.96 mm(1)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""
    나사산 선삭
    Top Notch™ 나사 가공
    (737)

    Top Notch™ 나사 가공

    LT 나사 가공
    (486)

    LT 나사 가공

    KM - 나사 가공
    (17)

    KM - 나사 가공

    필터 선택
    필터
    필터
      필터 보기 위치
      Metric
      Inch
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (1185)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1185)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1185)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1185)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1185)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1185)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1185)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1185)
      • M Stainless Steel (1185)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1185)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1185)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1185)
      • K Cast Iron (1066)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1066)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1066)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1066)
      • N Non-Ferrous Materials (601)
        • N1
          Wrought Aluminum (601)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(566)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(75)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (601)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (566)
        • N6
          Carbon, Graphite Composites, CFRP (566)
        • N7
          MMC's (16)
      • S High-Temp Alloys (1178)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1178)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1178)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1178)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1178)
      • H Hardened Materials (362)
        • H1
          Hardened Materials 44-48 HRC(362)
        • H2
          Hardened Materials 48-55 HRC(263)
        • H3
          Hardened Materials 56-60 HRC(106)
        • H4
          Hardened Materials >60 HRC(106)
      1차 선택 선택
      • DE (63)
      • GB (41)
      • SG (36)
      Applications
      Applications
      • Chamfer TurningChamfer Turning (4)
      • Cut-OffCut-Off (4)
      • Deep GroovingDeep Grooving (4)
      • Face GroovingFace Grooving (191)
      • FacingFacing (4)
      • GroovingGrooving (134)
      • ID GroovingID Grooving (69)
      • ID Thread TurningID Thread Turning (681)
      • Multiple Direction CuttingMultiple Direction Cutting (4)
      • OD Thread TurningOD Thread Turning (924)
      • Plunge TurningPlunge Turning (4)
      • ProfilingProfiling (4)
      • ThreadingThreading (205)
      • TurningTurning (4)
      Type of Thread
      Type of Thread
      • 55 (106)
      • 60 (449)
      • ACME (271)
      • API (149)
      • API BUTTRESS (29)
      • API RD (147)
      • BSPT (58)
      • BSW (217)
      • BUTTRESS (208)
      • M (254)
      • NPT (169)
      • NPTF (58)
      • RD DIN 405 (81)
      • STUB ACME (191)
      • TR DIN 103 (110)
      • UN (508)
      • UNJ (254)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (191)
      • Lightly Interrupted Cut (191)
      • Smooth Cut (192)
      • Varying Depth of Cut (192)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (325)
      Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Bolt-On Head (7)
      • Boring Bar Shank (115)
      • KM (17)
      • Toolholder (147)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (190)
      • 2.0 (727)
      • 3.0 (492)
      • 4.0 (5)
      Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.1811 in(17)
      • 1.625 in(7)
      • 2.1654 in(1)
      • 2.1917 in(1)
      • 2.3622 in(1)
      • 2.5 in(4)
      • 2.756 in(2)
      • 3.15 in(2)
      • 3.25 in(2)
      • 3.3465 in(2)
      • 3.5 in(4)
      • 3.937 in(8)
      • 3.94 in(2)
      • 4.0 in(3)
      • 4.5 in(14)
      • 4.921 in(9)
      • 4.9213 in(5)
      • 5.0 in(25)
      • 5.905 in(1)
      • 5.9055 in(13)
      • 5.906 in(18)
      • 5.996 in(1)
      • 6.0 in(55)
      • 6.06 in(1)
      • 6.1 in(2)
      • 6.11 in(2)
      • 6.6929 in(5)
      • 6.693 in(10)
      • 6.89 in(4)
      • 7.0 in(13)
      • 7.079 in(2)
      • 7.0866 in(10)
      • 7.087 in(1)
      • 7.874 in(9)
      • 7.93 in(1)
      • 7.976 in(1)
      • 8.0 in(7)
      • 8.058 in(2)
      • 8.082 in(1)
      • 9.8425 in(8)
      • 9.879 in(1)
      • 10.0 in(18)
      • 11.811 in(6)
      • 12.0 in(8)
      • 13.7795 in(1)
      • 14.0 in(7)
      • 16.0 in(8)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 30.0 mm(17)
      • 41.275 mm(7)
      • 55.0 mm(1)
      • 55.67 mm(1)
      • 60.0 mm(1)
      • 63.5 mm(4)
      • 70.0 mm(2)
      • 80.0 mm(2)
      • 82.55 mm(2)
      • 85.0 mm(2)
      • 88.9 mm(4)
      • 100.0 mm(10)
      • 101.6 mm(3)
      • 114.3 mm(14)
      • 125.0 mm(14)
      • 127.0 mm(25)
      • 150.0 mm(32)
      • 152.0 mm(2)
      • 152.29 mm(1)
      • 152.4 mm(52)
      • 153.0 mm(1)
      • 154.0 mm(2)
      • 155.0 mm(3)
      • 170.0 mm(15)
      • 175.0 mm(4)
      • 177.8 mm(11)
      • 178.0 mm(2)
      • 179.8 mm(2)
      • 180.0 mm(11)
      • 200.0 mm(9)
      • 201.422 mm(1)
      • 202.591 mm(1)
      • 203.19 mm(1)
      • 203.2 mm(6)
      • 204.673 mm(2)
      • 205.283 mm(1)
      • 250.0 mm(8)
      • 250.927 mm(1)
      • 254.0 mm(18)
      • 300.0 mm(6)
      • 304.8 mm(8)
      • 350.0 mm(1)
      • 355.6 mm(7)
      • 406.4 mm(8)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.001 in(18)
      • 0.002 in(144)
      • 0.003 in(338)
      • 0.004 in(225)
      • 0.005 in(86)
      • 0.006 in(157)
      • 0.007 in(244)
      • 0.008 in(252)
      • 0.009 in(84)
      • 0.01 in(179)
      • 0.011 in(95)
      • 0.012 in(83)
      • 0.013 in(123)
      • 0.014 in(120)
      • 0.016 in(77)
      • 0.017 in(23)
      • 0.018 in(107)
      • 0.019 in(33)
      • 0.02 in(149)
      • 0.021 in(24)
      • 0.023 in(107)
      • 0.026 in(3)
      • 0.028 in(17)
      • 0.03 in(72)
      • 0.031 in(139)
      • 0.032 in(5)
      • 0.035 in(106)
      • 0.036 in(9)
      • 0.038 in(1)
      • 0.039 in(155)
      • 0.047 in(139)
      • 0.049 in(45)
      • 0.059 in(139)
      • 0.062 in(63)
      • 0.063 in(178)
      • 0.069 in(45)
      • 0.078 in(63)
      • 0.079 in(64)
      • 0.089 in(4)
      • 0.094 in(102)
      • 0.098 in(22)
      • 0.125 in(39)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Radius
      Corner Radius
      • 0.025 mm(18)
      • 0.05 mm(144)
      • 0.075 mm(338)
      • 0.1 mm(225)
      • 0.125 mm(86)
      • 0.15 mm(157)
      • 0.175 mm(244)
      • 0.2 mm(252)
      • 0.225 mm(84)
      • 0.25 mm(179)
      • 0.275 mm(95)
      • 0.3 mm(83)
      • 0.325 mm(123)
      • 0.35 mm(120)
      • 0.4 mm(77)
      • 0.425 mm(23)
      • 0.45 mm(107)
      • 0.475 mm(33)
      • 0.5 mm(149)
      • 0.525 mm(24)
      • 0.575 mm(107)
      • 0.65 mm(3)
      • 0.7 mm(17)
      • 0.75 mm(72)
      • 0.775 mm(139)
      • 0.825 mm(5)
      • 0.9 mm(106)
      • 0.925 mm(9)
      • 0.975 mm(1)
      • 1.0 mm(155)
      • 1.2 mm(139)
      • 1.25 mm(45)
      • 1.5 mm(139)
      • 1.575 mm(63)
      • 1.6 mm(178)
      • 1.75 mm(45)
      • 1.975 mm(63)
      • 2.0 mm(64)
      • 2.25 mm(4)
      • 2.4 mm(102)
      • 2.5 mm(22)
      • 3.175 mm(39)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(917)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(917)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • K313 (185)
      • K420 (192)
      • K68 (224)
      • KB1630 (102)
      • KBH20 (32)
      • KC5010 (453)
      • KC5025 (757)
      • KC5410 (109)
      • KC720 (226)
      • KC730 (294)
      • KC850 (223)
      • KC9110 (21)
      • KCK20 (139)
      • KCK20B (178)
      • KCP10B (178)
      • KCP25B (178)
      • KCU10 (263)
      • KCU10B (194)
      • KCU25 (270)
      • KCU25B (180)
      • KD1425 (63)
      • KT315 (123)
      • PN120 (2)
      • THM (8)
      • TN6010 (11)
      • TN6025 (16)
      • TTS (2)
      • WU10HT (2)
      • WU10PT (5)
      • WU25PT (2)
      Hand Of Tool
      Hand Of Tool
      • L (116)
      • R (170)
      Wiper Insert
      Wiper Insert
      • N (1238)
      F Dimension
      F Dimension
      • 6.55 mm(1)
      • 6.553 mm(2)
      • 6.73 mm(1)
      • 7.0 mm(2)
      • 7.112 mm(4)
      • 7.3 mm(4)
      • 8.26 mm(1)
      • 8.89 mm(3)
      • 8.9 mm(2)
      • 9.52 mm(2)
      • 10.0 mm(1)
      • 10.3 mm(1)
      • 10.312 mm(1)
      • 10.785 mm(1)
      • 10.973 mm(4)
      • 11.0 mm(4)
      • 11.1 mm(2)
      • 11.3 mm(2)
      • 11.5 mm(2)
      • 11.684 mm(4)
      • 11.7 mm(1)
      • 12.0 mm(1)
      • 12.573 mm(3)
      • 12.7 mm(8)
      • 12.954 mm(4)
      • 13.0 mm(2)
      • 13.4 mm(3)
      • 14.0 mm(2)
      • 14.148 mm(3)
      • 14.27 mm(1)
      • 14.275 mm(3)
      • 15.6 mm(2)
      • 15.8 mm(1)
      • 15.875 mm(3)
      • 15.88 mm(2)
      • 16.0 mm(19)
      • 16.002 mm(2)
      • 16.1 mm(2)
      • 16.3 mm(2)
      • 16.51 mm(3)
      • 17.0 mm(4)
      • 17.2 mm(2)
      • 17.348 mm(2)
      • 17.4 mm(1)
      • 17.475 mm(2)
      • 17.48 mm(2)
      • 18.034 mm(3)
      • 19.05 mm(6)
      • 19.558 mm(1)
      • 20.0 mm(6)
      • 21.5 mm(2)
      • 21.59 mm(1)
      • 22.0 mm(8)
      • 22.225 mm(4)
      • 24.0 mm(2)
      • 25.0 mm(15)
      • 25.4 mm(20)
      • 25.8 mm(2)
      • 27.0 mm(4)
      • 28.575 mm(2)
      • 31.75 mm(27)
      • 32.0 mm(22)
      • 34.925 mm(4)
      • 35.0 mm(1)
      • 38.1 mm(16)
      • 38.887 mm(1)
      • 40.0 mm(7)
      • 41.275 mm(4)
      • 50.8 mm(4)
      F Dimension Min받는 사람F Dimension Max
      F Dimension
      F Dimension
      • 0.258 in(3)
      • 0.265 in(1)
      • 0.276 in(2)
      • 0.28 in(4)
      • 0.2874 in(4)
      • 0.325 in(1)
      • 0.35 in(3)
      • 0.3504 in(2)
      • 0.375 in(2)
      • 0.394 in(1)
      • 0.4055 in(1)
      • 0.406 in(1)
      • 0.4281 in(1)
      • 0.432 in(4)
      • 0.433 in(4)
      • 0.437 in(2)
      • 0.4449 in(2)
      • 0.4528 in(2)
      • 0.46 in(4)
      • 0.463 in(1)
      • 0.472 in(1)
      • 0.495 in(3)
      • 0.5 in(8)
      • 0.51 in(4)
      • 0.512 in(2)
      • 0.5276 in(3)
      • 0.551 in(2)
      • 0.557 in(3)
      • 0.562 in(4)
      • 0.6142 in(2)
      • 0.622 in(1)
      • 0.625 in(5)
      • 0.6299 in(15)
      • 0.63 in(6)
      • 0.6339 in(2)
      • 0.6417 in(2)
      • 0.65 in(3)
      • 0.669 in(4)
      • 0.6772 in(2)
      • 0.683 in(2)
      • 0.685 in(1)
      • 0.688 in(4)
      • 0.71 in(3)
      • 0.75 in(6)
      • 0.77 in(1)
      • 0.787 in(2)
      • 0.7874 in(4)
      • 0.8465 in(2)
      • 0.85 in(1)
      • 0.8661 in(8)
      • 0.875 in(4)
      • 0.9449 in(2)
      • 0.984 in(4)
      • 0.9843 in(11)
      • 1.0 in(20)
      • 1.0157 in(2)
      • 1.063 in(4)
      • 1.125 in(2)
      • 1.25 in(27)
      • 1.2598 in(13)
      • 1.26 in(9)
      • 1.375 in(4)
      • 1.378 in(1)
      • 1.5 in(16)
      • 1.531 in(1)
      • 1.5748 in(3)
      • 1.575 in(4)
      • 1.625 in(4)
      • 2.0 in(4)
      F Dimension Min받는 사람F Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 mm(87)
      • 11.176 mm(1)
      • 11.18 mm(1)
      • 11.181 mm(1)
      • 11.5 mm(2)
      • 12.19 mm(1)
      • 12.7 mm(4)
      • 13.0 mm(4)
      • 15.24 mm(1)
      • 16.0 mm(2)
      • 16.51 mm(3)
      • 17.0 mm(1)
      • 18.5 mm(2)
      • 18.542 mm(6)
      • 20.0 mm(5)
      • 20.32 mm(5)
      • 22.0 mm(3)
      • 22.86 mm(4)
      • 24.0 mm(3)
      • 25.4 mm(5)
      • 26.0 mm(2)
      • 27.0 mm(2)
      • 28.575 mm(4)
      • 28.58 mm(1)
      • 29.0 mm(5)
      • 30.48 mm(3)
      • 31.75 mm(3)
      • 32.0 mm(3)
      • 34.0 mm(4)
      • 34.92 mm(2)
      • 34.925 mm(4)
      • 36.83 mm(1)
      • 38.1 mm(5)
      • 39.0 mm(2)
      • 41.3 mm(31)
      • 44.0 mm(2)
      • 44.45 mm(2)
      • 47.0 mm(2)
      • 47.6 mm(31)
      • 50.0 mm(2)
      • 50.8 mm(2)
      • 54.0 mm(4)
      • 55.88 mm(3)
      • 56.625 mm(33)
      • 57.15 mm(1)
      • 57.2 mm(18)
      • 60.325 mm(2)
      • 63.5 mm(22)
      • 69.85 mm(4)
      • 70.0 mm(1)
      • 76.2 mm(8)
      • 76.962 mm(1)
      • 82.55 mm(4)
      • 88.9 mm(66)
      • 127.0 mm(1)
      • 139.7 mm(31)
      • 146.05 mm(3)
      • 174.6 mm(31)
      • 209.6 mm(20)
      • 222.3 mm(18)
      • 333.0 mm(3)
      Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 in(87)
      • 0.44 in(2)
      • 0.4402 in(1)
      • 0.453 in(2)
      • 0.48 in(1)
      • 0.5 in(4)
      • 0.5118 in(4)
      • 0.6 in(1)
      • 0.6299 in(2)
      • 0.65 in(3)
      • 0.6693 in(1)
      • 0.728 in(2)
      • 0.73 in(6)
      • 0.787 in(1)
      • 0.7874 in(4)
      • 0.8 in(5)
      • 0.866 in(2)
      • 0.8661 in(1)
      • 0.9 in(4)
      • 0.9449 in(3)
      • 1.0 in(5)
      • 1.024 in(2)
      • 1.063 in(2)
      • 1.125 in(5)
      • 1.1417 in(5)
      • 1.2 in(3)
      • 1.25 in(3)
      • 1.2598 in(3)
      • 1.339 in(4)
      • 1.375 in(6)
      • 1.45 in(1)
      • 1.5 in(5)
      • 1.5354 in(2)
      • 1.626 in(31)
      • 1.7323 in(2)
      • 1.75 in(2)
      • 1.8504 in(2)
      • 1.874 in(31)
      • 1.9685 in(2)
      • 2.0 in(2)
      • 2.126 in(4)
      • 2.2 in(3)
      • 2.229 in(33)
      • 2.25 in(1)
      • 2.252 in(18)
      • 2.375 in(2)
      • 2.5 in(22)
      • 2.75 in(4)
      • 2.7559 in(1)
      • 3.0 in(8)
      • 3.03 in(1)
      • 3.25 in(4)
      • 3.5 in(66)
      • 5.0 in(1)
      • 5.5 in(31)
      • 5.75 in(3)
      • 6.874 in(31)
      • 8.252 in(20)
      • 8.752 in(18)
      • 13.11 in(3)
      Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 393.661 in(192)
      Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 9999.0 mm(192)
      Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
      Countersunk Angle
      Countersunk Angle
      • 7.0 (12)
      • 10.0 (3)
      • 14.5 (145)
      • 15.0 (12)
      • 27.0 (8)
      • 27.5 (58)
      • 30.0 (651)
      • 33.0 (8)
      • 45.0 (18)
      Countersunk Angle Min받는 사람Countersunk Angle Max
      Cutting Direction
      Cutting Direction
      • E (156)
      • S (130)
      Rake Angle Style
      Rake Angle Style
      • DOUBLE NEGATIVE (105)
      • NEGATIVE-ZERO (23)
      • NEUTRAL (ZERO) (158)
      Maximum Bore Depth
      Maximum Bore Depth
      • 0.9843 in(2)
      • 1.0 in(12)
      • 1.231 in(1)
      • 1.235 in(1)
      • 1.25 in(2)
      • 1.2598 in(3)
      • 1.29 in(1)
      • 1.415 in(1)
      • 1.5 in(3)
      • 1.55 in(1)
      • 1.57 in(1)
      • 1.5748 in(3)
      • 1.85 in(1)
      • 1.88 in(2)
      • 2.0 in(26)
      • 2.25 in(2)
      • 2.3622 in(2)
      • 2.5 in(9)
      • 2.5196 in(2)
      • 2.52 in(2)
      • 3.0 in(6)
      • 3.125 in(1)
      • 3.1496 in(4)
      • 3.16 in(2)
      • 3.75 in(5)
      • 3.7758 in(1)
      • 3.7794 in(1)
      • 3.92 in(2)
      • 3.936 in(2)
      • 3.9372 in(4)
      • 4.0 in(4)
      • 4.5 in(4)
      • 4.7244 in(1)
      • 5.0 in(4)
      • 5.0392 in(5)
      • 5.9058 in(1)
      • 6.0 in(6)
      • 6.2992 in(6)
      • 7.0 in(3)
      • 7.874 in(1)
      • 8.0 in(6)
      • 9.0 in(1)
      • 10.0 in(8)
      Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 25.0 mm(2)
      • 25.4 mm(12)
      • 31.26 mm(1)
      • 31.3 mm(1)
      • 31.75 mm(2)
      • 32.0 mm(3)
      • 32.8 mm(1)
      • 35.94 mm(1)
      • 38.1 mm(3)
      • 39.5 mm(1)
      • 39.878 mm(1)
      • 40.0 mm(3)
      • 47.5 mm(1)
      • 48.0 mm(2)
      • 50.8 mm(26)
      • 57.15 mm(2)
      • 60.0 mm(2)
      • 63.48 mm(1)
      • 63.5 mm(8)
      • 64.0 mm(4)
      • 76.2 mm(6)
      • 79.375 mm(1)
      • 80.0 mm(6)
      • 95.25 mm(5)
      • 96.0 mm(2)
      • 100.0 mm(8)
      • 101.6 mm(4)
      • 114.3 mm(4)
      • 120.0 mm(1)
      • 127.0 mm(4)
      • 128.0 mm(5)
      • 150.0 mm(1)
      • 152.4 mm(6)
      • 160.0 mm(6)
      • 177.8 mm(3)
      • 200.0 mm(1)
      • 203.2 mm(6)
      • 228.6 mm(1)
      • 254.0 mm(8)
      Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • C (21)
      • H (6)
      • S (95)
      frontEnd
      Clamp Style
      Clamp Style
      • C (60)
      • M (24)
      • N (198)
      • S (21)
      • Y (21)
      Cutting Width
      Cutting Width
      • 0.0197 in(76)
      • 0.031 in(84)
      • 0.0315 in(76)
      • 0.035 in(39)
      • 0.039 in(76)
      • 0.0394 in(139)
      • 0.041 in(76)
      • 0.047 in(147)
      • 0.0472 in(139)
      • 0.055 in(76)
      • 0.0551 in(76)
      • 0.058 in(76)
      • 0.0591 in(139)
      • 0.062 in(147)
      • 0.0669 in(76)
      • 0.067 in(76)
      • 0.0689 in(139)
      • 0.072 in(63)
      • 0.076 in(37)
      • 0.0768 in(76)
      • 0.077 in(37)
      • 0.078 in(63)
      • 0.0787 in(139)
      • 0.079 in(108)
      • 0.0866 in(139)
      • 0.088 in(139)
      • 0.0886 in(107)
      • 0.094 in(147)
      • 0.097 in(63)
      • 0.0984 in(139)
      • 0.105 in(63)
      • 0.108 in(76)
      • 0.1083 in(139)
      • 0.11 in(63)
      • 0.118 in(102)
      • 0.1181 in(178)
      • 0.122 in(63)
      • 0.125 in(178)
      • 0.126 in(102)
      • 0.1278 in(76)
      • 0.128 in(63)
      • 0.129 in(37)
      • 0.131 in(32)
      • 0.1378 in(143)
      • 0.142 in(63)
      • 0.147 in(39)
      • 0.151 in(76)
      • 0.156 in(63)
      • 0.157 in(63)
      • 0.1574 in(64)
      • 0.1575 in(102)
      • 0.167 in(39)
      • 0.1673 in(63)
      • 0.1771 in(7)
      • 0.1772 in(102)
      • 0.178 in(63)
      • 0.185 in(63)
      • 0.188 in(102)
      • 0.189 in(102)
      • 0.192 in(32)
      • 0.193 in(32)
      • 0.195 in(63)
      • 0.196 in(63)
      • 0.1969 in(39)
      • 0.197 in(21)
      • 0.213 in(39)
      • 0.2165 in(18)
      • 0.2166 in(21)
      • 0.2362 in(39)
      • 0.25 in(40)
      • 0.256 in(39)
      • 0.281 in(2)
      • 0.312 in(2)
      • 0.375 in(3)
      • 0.381 in(3)
      • 0.384 in(8)
      Cutting Width Min받는 사람Cutting Width Max
      Cutting Width
      Cutting Width
      • 0.5 mm(76)
      • 0.787 mm(84)
      • 0.8 mm(76)
      • 0.889 mm(39)
      • 0.991 mm(76)
      • 1.0 mm(139)
      • 1.041 mm(76)
      • 1.19 mm(107)
      • 1.194 mm(147)
      • 1.2 mm(139)
      • 1.39 mm(76)
      • 1.397 mm(39)
      • 1.4 mm(76)
      • 1.473 mm(76)
      • 1.5 mm(139)
      • 1.57 mm(100)
      • 1.575 mm(147)
      • 1.69 mm(39)
      • 1.7 mm(76)
      • 1.702 mm(76)
      • 1.75 mm(139)
      • 1.829 mm(63)
      • 1.94 mm(37)
      • 1.95 mm(76)
      • 1.956 mm(37)
      • 1.981 mm(63)
      • 2.0 mm(139)
      • 2.007 mm(76)
      • 2.2 mm(139)
      • 2.235 mm(102)
      • 2.236 mm(32)
      • 2.24 mm(76)
      • 2.25 mm(107)
      • 2.387 mm(32)
      • 2.388 mm(147)
      • 2.39 mm(31)
      • 2.464 mm(63)
      • 2.5 mm(139)
      • 2.667 mm(63)
      • 2.74 mm(37)
      • 2.743 mm(39)
      • 2.75 mm(139)
      • 2.794 mm(63)
      • 2.997 mm(102)
      • 3.0 mm(178)
      • 3.099 mm(63)
      • 3.17 mm(63)
      • 3.175 mm(178)
      • 3.18 mm(58)
      • 3.2 mm(102)
      • 3.245 mm(76)
      • 3.25 mm(63)
      • 3.251 mm(32)
      • 3.27 mm(37)
      • 3.32 mm(32)
      • 3.329 mm(32)
      • 3.5 mm(143)
      • 3.607 mm(63)
      • 3.73 mm(39)
      • 3.835 mm(39)
      • 3.84 mm(76)
      • 3.96 mm(63)
      • 3.962 mm(63)
      • 3.974 mm(32)
      • 3.988 mm(63)
      • 4.0 mm(102)
      • 4.242 mm(39)
      • 4.25 mm(63)
      • 4.5 mm(102)
      • 4.521 mm(63)
      • 4.699 mm(63)
      • 4.775 mm(102)
      • 4.78 mm(18)
      • 4.785 mm(18)
      • 4.788 mm(21)
      • 4.8 mm(63)
      • 4.801 mm(102)
      • 4.88 mm(32)
      • 4.9 mm(32)
      • 4.95 mm(63)
      • 4.953 mm(32)
      • 4.978 mm(63)
      • 5.0 mm(39)
      • 5.004 mm(21)
      • 5.41 mm(39)
      • 5.5 mm(39)
      • 6.0 mm(39)
      • 6.35 mm(40)
      • 6.36 mm(21)
      • 6.502 mm(39)
      • 7.137 mm(2)
      • 7.925 mm(2)
      • 9.525 mm(3)
      • 9.677 mm(3)
      • 9.754 mm(8)
      Cutting Width Min받는 사람Cutting Width Max
      Insert Shape
      Insert Shape
      • LT-TRIANGLE LAY DOWN THREAD 60 (492)
      • TN-TOP NOTCH (748)
      Insert Size
      Insert Size
      • 1 (8)
      • 2 (49)
      • 3 (36)
      • 4 (19)
      • 6 (2)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.0 in(11)
      • 0.04 in(1)
      • 0.063 in(2)
      • 0.067 in(1)
      • 0.07 in(2)
      • 0.075 in(1)
      • 0.13 in(1)
      • 0.138 in(39)
      • 0.1382 in(1)
      • 0.21 in(39)
      • 0.24 in(2)
      • 0.25 in(2)
      • 0.294 in(23)
      • 0.3 in(1)
      • 0.334 in(4)
      • 0.415 in(2)
      • 0.4151 in(1)
      Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.0 mm(11)
      • 1.016 mm(1)
      • 1.6 mm(2)
      • 1.69 mm(1)
      • 1.78 mm(2)
      • 1.9 mm(1)
      • 3.3 mm(1)
      • 3.505 mm(21)
      • 3.51 mm(19)
      • 5.33 mm(16)
      • 5.334 mm(23)
      • 6.096 mm(2)
      • 6.35 mm(2)
      • 7.46 mm(8)
      • 7.468 mm(9)
      • 7.47 mm(6)
      • 7.62 mm(1)
      • 8.484 mm(4)
      • 10.54 mm(1)
      • 10.541 mm(1)
      • 10.543 mm(1)
      Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
      Thread TPI
      Thread TPI
      • 2.0 (7)
      • 2.5 (2)
      • 3.0 (4)
      • 4.0 (39)
      • 5.0 (30)
      • 6.0 (36)
      • 7.0 (9)
      • 8.0 (69)
      • 9.0 (2)
      • 10.0 (32)
      • 11.0 (15)
      • 11.5 (12)
      • 12.0 (53)
      • 13.0 (2)
      • 14.0 (54)
      • 16.0 (70)
      • 18.0 (30)
      • 19.0 (5)
      • 20.0 (36)
      • 24.0 (28)
      • 27.0 (2)
      • 28.0 (18)
      • 32.0 (18)
      • 36.0 (1)
      • 40.0 (2)
      • 48.0 (29)
      Thread TPI Min받는 사람Thread TPI Max
      Thread Pitch
      Thread Pitch
      • 0.35 mm(1)
      • 0.4 mm(1)
      • 0.5 mm(7)
      • 0.75 mm(7)
      • 0.8 mm(1)
      • 1.0 mm(13)
      • 1.25 mm(9)
      • 1.5 mm(33)
      • 1.75 mm(7)
      • 2.0 mm(19)
      • 2.5 mm(8)
      • 3.0 mm(32)
      • 3.5 mm(3)
      • 4.0 mm(4)
      • 4.5 mm(2)
      • 5.0 mm(10)
      • 6.25 mm(3)
      Thread Pitch Min받는 사람Thread Pitch Max
      Thread Pitch
      Thread Pitch
      • 0.35 in(1)
      • 0.4 in(1)
      • 0.5 in(7)
      • 0.75 in(7)
      • 0.8 in(1)
      • 1.0 in(13)
      • 1.25 in(9)
      • 1.5 in(33)
      • 1.75 in(7)
      • 2.0 in(19)
      • 2.5 in(8)
      • 3.0 in(32)
      • 3.5 in(3)
      • 4.0 in(4)
      • 4.5 in(2)
      • 5.0 in(10)
      • 6.25 in(3)
      Thread Pitch Min받는 사람Thread Pitch Max
      insertGeometry
      Shape
      Shape
      • LT-TRIANGLE LAY DOWN THREAD 60 (366)
      • TN-TOP NOTCH (549)
      Insert IC Size
      Insert IC Size
      • 4.0 mm(1)
      • 4.762 mm(3)
      • 5.0 mm(7)
      • 6.35 mm(44)
      • 9.525 mm(269)
      • 12.7 mm(41)
      • 15.875 mm(4)
      Insert IC Size Min받는 사람Insert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.1575 in(1)
      • 0.1696 in(1)
      • 0.1875 in(3)
      • 0.1969 in(6)
      • 0.25 in(44)
      • 0.375 in(269)
      • 0.5 in(41)
      • 0.625 in(4)
      Insert IC Size Min받는 사람Insert IC Size Max
      Insert Seat Size
      Insert Seat Size
      • 1 (6)
      • 11 (1)
      • 16 (3)
      • 2 (78)
      • 3 (379)
      • 4 (65)
      • 4U (3)
      • 6 (15)
      • 8 (11)
      Cutting Edge Length
      Cutting Edge Length
      • 6.928 mm(1)
      • 8.66 mm(7)
      • 11.0 mm(1)
      • 16.498 mm(3)
      Cutting Edge Length Min받는 사람Cutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.2728 in(1)
      • 0.341 in(7)
      • 0.433 in(1)
      • 0.6495 in(3)
      Cutting Edge Length Min받는 사람Cutting Edge Length Max
      Cutting Tool Material
      Cutting Tool Material
      • B H (102)
      • B L (32)
      • D P (63)
      • H T (123)
      • H W (1240)
      backEnd
      Connection Type
      Connection Type
      • BORING BAR (115)
      • BORING BAR HEAD (7)
      • SQUARE SHANK (147)
      • TAPER SHANK (17)
      System Size
      System Size
      • KM25 (17)
      Back-End Diameter
      Back-End Diameter
      • 7.9 mm(1)
      • 9.5 mm(1)
      • 9.525 mm(3)
      • 10.0 mm(3)
      • 12.0 mm(3)
      • 12.7 mm(9)
      • 15.87 mm(1)
      • 15.875 mm(7)
      • 16.0 mm(6)
      • 19.05 mm(15)
      • 20.0 mm(14)
      • 25.0 mm(26)
      • 25.4 mm(8)
      • 31.75 mm(8)
      • 32.0 mm(7)
      • 38.1 mm(2)
      • 40.0 mm(6)
      • 44.45 mm(3)
      • 50.0 mm(1)
      • 50.8 mm(6)
      • 57.15 mm(1)
      • 63.5 mm(8)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      Shank Height
      Shank Height
      • 0.375 in(4)
      • 0.394 in(3)
      • 0.472 in(3)
      • 0.4724 in(2)
      • 0.5 in(8)
      • 0.5835 in(2)
      • 0.6067 in(2)
      • 0.625 in(8)
      • 0.6299 in(4)
      • 0.63 in(4)
      • 0.7409 in(11)
      • 0.75 in(16)
      • 0.7642 in(1)
      • 0.787 in(4)
      • 0.7874 in(7)
      • 0.9378 in(5)
      • 0.961 in(1)
      • 0.984 in(6)
      • 0.9843 in(15)
      • 1.0 in(28)
      • 1.2134 in(7)
      • 1.25 in(15)
      • 1.2598 in(9)
      • 1.26 in(7)
      • 1.5 in(4)
      • 1.5283 in(6)
      • 1.8488 in(1)
      Shank Height Min받는 사람Shank Height Max
      Shank Height
      Shank Height
      • 9.52 mm(2)
      • 9.525 mm(2)
      • 10.0 mm(3)
      • 12.0 mm(5)
      • 12.7 mm(8)
      • 14.82 mm(2)
      • 15.41 mm(2)
      • 15.875 mm(5)
      • 15.88 mm(3)
      • 16.0 mm(8)
      • 18.82 mm(11)
      • 19.05 mm(16)
      • 19.41 mm(1)
      • 20.0 mm(11)
      • 23.82 mm(5)
      • 24.41 mm(1)
      • 25.0 mm(21)
      • 25.4 mm(28)
      • 30.82 mm(7)
      • 31.75 mm(15)
      • 32.0 mm(16)
      • 38.1 mm(4)
      • 38.82 mm(6)
      • 46.96 mm(1)
      Shank Height Min받는 사람Shank Height Max
      Shank Width
      Shank Width
      • 0.375 in(4)
      • 0.394 in(3)
      • 0.472 in(3)
      • 0.4724 in(2)
      • 0.5 in(8)
      • 0.625 in(8)
      • 0.6299 in(4)
      • 0.63 in(4)
      • 0.75 in(16)
      • 0.787 in(4)
      • 0.7874 in(8)
      • 0.8646 in(5)
      • 0.984 in(9)
      • 0.9843 in(14)
      • 1.0 in(28)
      • 1.1402 in(7)
      • 1.25 in(15)
      • 1.2598 in(9)
      • 1.26 in(4)
      • 1.4551 in(6)
      • 1.5 in(4)
      • 1.8488 in(1)
      Shank Width Min받는 사람Shank Width Max
      Shank Width
      Shank Width
      • 9.52 mm(2)
      • 9.525 mm(2)
      • 10.0 mm(3)
      • 12.0 mm(5)
      • 12.7 mm(8)
      • 15.875 mm(5)
      • 15.88 mm(3)
      • 16.0 mm(8)
      • 19.05 mm(16)
      • 20.0 mm(12)
      • 21.96 mm(5)
      • 25.0 mm(23)
      • 25.4 mm(28)
      • 28.96 mm(7)
      • 31.75 mm(15)
      • 32.0 mm(13)
      • 36.96 mm(6)
      • 38.1 mm(4)
      • 46.96 mm(1)
      Shank Width Min받는 사람Shank Width Max
      No filters matching ""
      나사산 선삭
      Top Notch™ Threading

      Top Notch™ Threading

      View Categories
      LT Threading

      LT Threading

      View Categories
      KM - Threading

      KM - Threading

      내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
      Select the destination where you want to move 받는 사람.
      신제품 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      유효한 이름을 입력하십시오.
      product-image
      Please adjust the following properties from

      ISO 카탈로그 번호

      ANSI 카탈로그 번호

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      대시보드 정보를 보려면 로그인해야 합니다.
      Session expired due to inactivity, please login again
      장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
      항목이 장바구니에 추가되었습니다.
      장바구니 보기

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number ISO 카탈로그 번호 등급  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk