환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

PSC

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (264)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(264)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(264)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(264)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(264)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(264)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(264)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(264)
    • M Stainless Steel (264)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(264)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(264)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(264)
    • K Cast Iron (264)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(264)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(264)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(264)
    • N Non-Ferrous Materials (260)
      • N1
        Wrought Aluminum (260)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(260)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(183)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (260)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (260)
      • N6
        Carbon, Graphite Composites, CFRP (260)
      • N7
        MMC's (240)
    • S High-Temp Alloys (264)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(264)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(264)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(264)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(264)
    • H Hardened Materials (226)
      • H1
        Hardened Materials 44-48 HRC(226)
      • H2
        Hardened Materials 48-55 HRC(226)
      • H3
        Hardened Materials 56-60 HRC(225)
      • H4
        Hardened Materials >60 HRC(185)
    • C CFRP Materials (200)
      • C1
        CFRP, CFRP / CFRP (200)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (180)
    Applications
    Applications
    • Back BoringBack Boring (1)
    • FacingFacing (196)
    • GroovingGrooving (17)
    • ID FacingID Facing (174)
    • ID GroovingID Grooving (21)
    • ID Thread TurningID Thread Turning (25)
    • Multiple Direction CuttingMultiple Direction Cutting (212)
    • OD Thread TurningOD Thread Turning (7)
    • Plunge TurningPlunge Turning (57)
    • ProfilingProfiling (24)
    • TRN BoringTRN Boring (174)
    • TurningTurning (203)
    Type of Thread
    Type of Thread
    • 55 (26)
    • 60 (62)
    • ACME (58)
    • API (39)
    • API BUTTRESS (7)
    • API RD (41)
    • BSPT (19)
    • BSW (48)
    • BUTTRESS (36)
    • M (51)
    • NPT (41)
    • NPTF (19)
    • RD DIN 405 (26)
    • STUB ACME (48)
    • TR DIN 103 (26)
    • UN (55)
    • UNJ (41)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (237)
    • Lightly Interrupted Cut (238)
    • Smooth Cut (238)
    • Varying Depth of Cut (237)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (10)
    • 49.683 (1)
    • 62.233 (1)
    • 62.5 (3)
    • 72.5 (3)
    • 75.0 (18)
    • 90.0 (71)
    • 93.0 (65)
    • 95.0 (73)
    • 107.5 (21)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • PSC (171)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (178)
    • 2.0 (205)
    • 3.0 (33)
    • 4.0 (149)
    • 6.0 (9)
    • 8.0 (84)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(1)
    • 2.047 in(12)
    • 2.126 in(1)
    • 2.205 in(1)
    • 2.362 in(53)
    • 2.441 in(3)
    • 2.559 in(86)
    • 2.757 in(8)
    • 2.953 in(2)
    • 3.15 in(5)
    • 3.543 in(22)
    • 3.938 in(10)
    • 4.134 in(5)
    • 4.331 in(14)
    • 4.724 in(2)
    • 4.921 in(2)
    • 5.513 in(28)
    • 5.71 in(1)
    • 5.906 in(5)
    • 6.891 in(5)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(1)
    • 52.0 mm(12)
    • 54.0 mm(1)
    • 56.0 mm(1)
    • 60.0 mm(53)
    • 62.0 mm(3)
    • 65.0 mm(86)
    • 70.0 mm(8)
    • 75.0 mm(2)
    • 80.0 mm(5)
    • 90.0 mm(22)
    • 100.0 mm(10)
    • 105.0 mm(5)
    • 110.0 mm(14)
    • 120.0 mm(2)
    • 125.0 mm(2)
    • 140.0 mm(28)
    • 145.0 mm(1)
    • 150.0 mm(5)
    • 175.0 mm(5)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(10)
    • 0.001 in(24)
    • 0.002 in(76)
    • 0.003 in(55)
    • 0.004 in(176)
    • 0.005 in(25)
    • 0.006 in(49)
    • 0.007 in(37)
    • 0.008 in(171)
    • 0.01 in(37)
    • 0.011 in(26)
    • 0.012 in(27)
    • 0.014 in(66)
    • 0.015 in(2)
    • 0.016 in(193)
    • 0.017 in(7)
    • 0.019 in(32)
    • 0.02 in(27)
    • 0.021 in(4)
    • 0.023 in(32)
    • 0.024 in(7)
    • 0.028 in(8)
    • 0.03 in(6)
    • 0.031 in(219)
    • 0.035 in(32)
    • 0.037 in(10)
    • 0.039 in(29)
    • 0.047 in(215)
    • 0.049 in(26)
    • 0.055 in(2)
    • 0.06 in(28)
    • 0.062 in(55)
    • 0.063 in(177)
    • 0.069 in(26)
    • 0.078 in(22)
    • 0.079 in(32)
    • 0.089 in(32)
    • 0.094 in(28)
    • 0.095 in(75)
    • 0.098 in(10)
    • 0.125 in(10)
    • 0.126 in(25)
    • 0.157 in(8)
    • 0.197 in(1)
    • 0.237 in(2)
    • 0.25 in(2)
    • 0.313 in(2)
    • 0.315 in(2)
    • 0.394 in(2)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(10)
    • 0.025 mm(24)
    • 0.05 mm(76)
    • 0.076 mm(55)
    • 0.1 mm(176)
    • 0.125 mm(25)
    • 0.151 mm(49)
    • 0.176 mm(37)
    • 0.2 mm(171)
    • 0.225 mm(24)
    • 0.25 mm(37)
    • 0.275 mm(26)
    • 0.301 mm(27)
    • 0.325 mm(34)
    • 0.351 mm(64)
    • 0.375 mm(2)
    • 0.4 mm(193)
    • 0.426 mm(7)
    • 0.45 mm(32)
    • 0.476 mm(10)
    • 0.5 mm(27)
    • 0.525 mm(4)
    • 0.576 mm(32)
    • 0.601 mm(7)
    • 0.701 mm(8)
    • 0.75 mm(6)
    • 0.775 mm(26)
    • 0.8 mm(193)
    • 0.9 mm(32)
    • 0.925 mm(10)
    • 1.0 mm(29)
    • 1.201 mm(215)
    • 1.25 mm(26)
    • 1.401 mm(2)
    • 1.5 mm(26)
    • 1.526 mm(2)
    • 1.576 mm(55)
    • 1.6 mm(177)
    • 1.75 mm(26)
    • 1.975 mm(22)
    • 2.0 mm(32)
    • 2.25 mm(32)
    • 2.375 mm(28)
    • 2.401 mm(75)
    • 2.5 mm(10)
    • 3.176 mm(10)
    • 3.2 mm(25)
    • 4.0 mm(8)
    • 5.0 mm(1)
    • 6.0 mm(2)
    • 6.351 mm(2)
    • 7.95 mm(2)
    • 8.0 mm(2)
    • 10.0 mm(2)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (118)
    • 241 (33)
    • AC5 (4)
    • CG4 (2)
    • CL4 (90)
    • CM2 (111)
    • CM3 (94)
    • CM4 (54)
    • CM5 (6)
    • CPX (120)
    • CW2 (65)
    • CW2015 (114)
    • CW5025 (124)
    • GH1 (5)
    • GX (58)
    • HCK10 (18)
    • HCK20 (8)
    • HK1500 (121)
    • HK35 (10)
    • HT2 (114)
    • HTX (72)
    • HWK15 (18)
    • K00326 (7)
    • K00331 (10)
    • K060 (48)
    • K090 (127)
    • K1 (52)
    • K1010P (5)
    • K10M (162)
    • K10P (131)
    • K10U (128)
    • K15 (17)
    • K15U (128)
    • K20K (147)
    • K21 (56)
    • K25M (145)
    • K25P (139)
    • K2885 (26)
    • K313 (232)
    • K35P (79)
    • K420 (137)
    • K45 (54)
    • K4H (23)
    • K6 (1)
    • K68 (224)
    • K8735 (7)
    • KB1340 (47)
    • KB1345 (93)
    • KB1610 (94)
    • KB1625 (78)
    • KB1630 (94)
    • KB5610 (90)
    • KB5625 (109)
    • KB5630 (83)
    • KB9610 (126)
    • KB9640 (56)
    • KBH10 (128)
    • KBH10B (82)
    • KBH20 (142)
    • KBH20B (82)
    • KBK35 (33)
    • KC210 (99)
    • KC250 (117)
    • KC5010 (252)
    • KC5020P (27)
    • KC5025 (258)
    • KC5410 (214)
    • KC5510 (144)
    • KC5525 (95)
    • KC710 (85)
    • KC720 (191)
    • KC722 (79)
    • KC730 (223)
    • KC7310 (153)
    • KC732 (150)
    • KC8050 (202)
    • KC810 (228)
    • KC850 (234)
    • KC9010 (160)
    • KC9025 (195)
    • KC910 (207)
    • KC9105 (182)
    • KC9110 (237)
    • KC9120 (188)
    • KC9125 (201)
    • KC9125RR (4)
    • KC9140 (148)
    • KC9145 (134)
    • KC9210 (32)
    • KC9215 (146)
    • KC9225 (193)
    • KC9240 (190)
    • KC9240NEW (190)
    • KC9245 (146)
    • KC9315 (202)
    • KC9320 (224)
    • KC9325 (163)
    • KC935 (231)
    • KC950 (211)
    • KC990 (162)
    • KCD25 (57)
    • KCK05 (194)
    • KCK05B (173)
    • KCK15 (186)
    • KCK15B (199)
    • KCK20 (223)
    • KCK20B (226)
    • KCM15 (185)
    • KCM15B (182)
    • KCM25 (197)
    • KCM25B (185)
    • KCM25S (14)
    • KCM35 (171)
    • KCM35B (130)
    • KCP05 (168)
    • KCP05B (132)
    • KCP10 (200)
    • KCP10B (237)
    • KCP15 (19)
    • KCP20S (14)
    • KCP25 (201)
    • KCP25B (237)
    • KCP25C (238)
    • KCP30 (192)
    • KCP30B (144)
    • KCP40 (126)
    • KCP40B (157)
    • KCPK05 (148)
    • KCS10 (79)
    • KCS10B (193)
    • KCS25S (14)
    • KCU10 (238)
    • KCU10B (236)
    • KCU25 (234)
    • KCU25B (230)
    • KD050 (99)
    • KD081 (111)
    • KD100 (103)
    • KD120 (94)
    • KD1400 (92)
    • KD1405 (69)
    • KD1425 (121)
    • KM1 (47)
    • KMF (33)
    • KN10S (16)
    • KS15 (40)
    • KT1120 (32)
    • KT125 (98)
    • KT150 (61)
    • KT175 (147)
    • KT315 (190)
    • KT325 (114)
    • KT5020 (6)
    • KTP10 (140)
    • KTP25S (124)
    • KU10 (35)
    • KU10T (180)
    • KU25T (46)
    • KU30T (221)
    • KY1310 (75)
    • KY1320 (124)
    • KY1540 (59)
    • KY1615 (122)
    • KY2000 (76)
    • KY2100 (48)
    • KY3000 (157)
    • KY3400 (94)
    • KY3500 (132)
    • KY4000 (60)
    • KY4300 (72)
    • KY4400 (123)
    • KYHK15B (123)
    • KYK10 (55)
    • KYK25 (86)
    • KYK35 (132)
    • KYS25 (59)
    • KYS30 (66)
    • MC2 (4)
    • NL200 (65)
    • NL250 (142)
    • NL300 (114)
    • NL400 (68)
    • NL920 (106)
    • P25 (54)
    • PB100 (38)
    • PB170 (37)
    • PB250 (42)
    • PB300 (33)
    • PD100 (18)
    • PD50 (10)
    • PN120 (2)
    • PS5 (75)
    • SP0819 (111)
    • SP0A00 (4)
    • SP0PW3 (4)
    • SP3019 (80)
    • SP4019 (89)
    • SP4036 (6)
    • SP4066 (7)
    • SP4093 (6)
    • SP61EJ (4)
    • SPADAP (19)
    • SPN3W1 (8)
    • SPN4W2 (8)
    • SPSREJ (3)
    • THM (122)
    • THM-X (86)
    • THMF-X (37)
    • TN10P (201)
    • TN10U (132)
    • TN15M (172)
    • TN15U (128)
    • TN2000 (133)
    • TN20K (175)
    • TN20P (187)
    • TN30M (182)
    • TN30P (126)
    • TN4000 (124)
    • TN5015 (152)
    • TN5020 (162)
    • TN5105 (114)
    • TN5120 (175)
    • TN6010 (135)
    • TN6025 (151)
    • TN7005 (127)
    • TN7010 (178)
    • TN7015 (178)
    • TN7025 (178)
    • TN7035 (155)
    • TN7105 (124)
    • TN7110 (203)
    • TN7115 (175)
    • TN7125 (167)
    • TN7135 (157)
    • TN8025 (153)
    • TTI15 (109)
    • TTM (8)
    • TTM09 (15)
    • TTR (55)
    • TTR-X (8)
    • TTS (98)
    • TTX (98)
    • W00342 (18)
    • WBH10C (125)
    • WBH10P (83)
    • WBH10U (94)
    • WBH20P (111)
    • WBH25P (87)
    • WBH25U (105)
    • WBH30P (83)
    • WBK40U (47)
    • WBK45U (93)
    • WDN00U (52)
    • WDN25U (92)
    • WK05CT (164)
    • WK15CT (117)
    • WK20CT (188)
    • WM15CT (183)
    • WM25CT (183)
    • WM35CT (144)
    • WP05CT (40)
    • WP15CT (190)
    • WP20TT (15)
    • WP25CT (190)
    • WP35CT (188)
    • WS10PT (158)
    • WS25PT (157)
    • WU05PT (18)
    • WU10HT (185)
    • WU10PT (143)
    • WU25PT (143)
    • X00511 (33)
    • X00580 (33)
    • X00581 (33)
    • X00582 (33)
    • X00583 (33)
    • X00584 (33)
    • X00585 (33)
    • X00586 (33)
    • X00591 (33)
    • X00592 (33)
    • X00593 (33)
    • X00594 (33)
    • X00596 (33)
    • X00597 (33)
    • X00599 (33)
    Hand Of Tool
    Hand Of Tool
    • L (75)
    • N (12)
    • R (84)
    Wiper Insert
    Wiper Insert
    • N (264)
    • Y (105)
    F Dimension
    F Dimension
    • 0.0 mm(10)
    • 5.0 mm(1)
    • 6.0 mm(1)
    • 11.0 mm(4)
    • 12.0 mm(2)
    • 13.0 mm(7)
    • 14.0 mm(3)
    • 17.0 mm(25)
    • 18.0 mm(2)
    • 22.0 mm(23)
    • 27.0 mm(34)
    • 32.0 mm(1)
    • 35.0 mm(35)
    • 43.0 mm(2)
    • 45.0 mm(21)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(10)
    • 0.197 in(1)
    • 0.237 in(1)
    • 0.433 in(4)
    • 0.473 in(2)
    • 0.512 in(7)
    • 0.551 in(3)
    • 0.669 in(25)
    • 0.709 in(2)
    • 0.866 in(23)
    • 1.063 in(34)
    • 1.26 in(1)
    • 1.379 in(35)
    • 1.693 in(2)
    • 1.772 in(21)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(7)
    • 20.0 mm(6)
    • 24.0 mm(2)
    • 24.5 mm(1)
    • 25.0 mm(7)
    • 32.0 mm(21)
    • 33.0 mm(3)
    • 33.5 mm(1)
    • 34.0 mm(2)
    • 38.5 mm(4)
    • 40.0 mm(19)
    • 41.301 mm(4)
    • 47.6 mm(4)
    • 48.0 mm(3)
    • 48.5 mm(3)
    • 50.0 mm(23)
    • 52.5 mm(1)
    • 53.0 mm(1)
    • 57.2 mm(3)
    • 62.0 mm(3)
    • 63.0 mm(12)
    • 64.0 mm(2)
    • 65.0 mm(6)
    • 65.5 mm(1)
    • 66.0 mm(1)
    • 80.0 mm(2)
    • 81.0 mm(3)
    • 88.9 mm(4)
    • 90.0 mm(7)
    • 100.0 mm(2)
    • 110.0 mm(58)
    • 125.0 mm(21)
    • 139.701 mm(4)
    • 165.0 mm(1)
    • 174.601 mm(4)
    • 209.601 mm(3)
    • 215.0 mm(2)
    • 222.3 mm(3)
    • 223.0 mm(2)
    • 510.0 mm(2)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(7)
    • 0.787 in(6)
    • 0.946 in(2)
    • 0.965 in(1)
    • 0.984 in(7)
    • 1.26 in(21)
    • 1.299 in(3)
    • 1.319 in(1)
    • 1.339 in(2)
    • 1.516 in(4)
    • 1.575 in(19)
    • 1.627 in(4)
    • 1.874 in(4)
    • 1.891 in(3)
    • 1.909 in(3)
    • 1.969 in(23)
    • 2.067 in(1)
    • 2.087 in(1)
    • 2.253 in(3)
    • 2.441 in(3)
    • 2.48 in(12)
    • 2.52 in(2)
    • 2.559 in(6)
    • 2.579 in(1)
    • 2.598 in(1)
    • 3.15 in(2)
    • 3.189 in(3)
    • 3.5 in(4)
    • 3.543 in(7)
    • 3.938 in(2)
    • 4.331 in(58)
    • 4.921 in(21)
    • 5.5 in(4)
    • 6.496 in(1)
    • 6.875 in(4)
    • 8.252 in(3)
    • 8.465 in(2)
    • 8.752 in(3)
    • 8.78 in(2)
    • 20.079 in(2)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(36)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(36)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (47)
    • E (51)
    • P (1)
    • S (72)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (87)
    • NEGATIVE-ZERO (31)
    • NEUTRAL (ZERO) (30)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.417 in(3)
    • 1.655 in(2)
    • 1.811 in(3)
    • 1.85 in(2)
    • 1.891 in(2)
    • 1.969 in(1)
    • 2.008 in(1)
    • 2.047 in(10)
    • 2.126 in(1)
    • 2.205 in(5)
    • 2.362 in(34)
    • 2.441 in(4)
    • 2.512 in(2)
    • 2.52 in(5)
    • 2.525 in(1)
    • 2.559 in(50)
    • 2.598 in(5)
    • 2.638 in(10)
    • 2.835 in(2)
    • 2.914 in(3)
    • 3.15 in(6)
    • 3.281 in(2)
    • 3.307 in(4)
    • 3.465 in(6)
    • 3.48 in(1)
    • 3.701 in(2)
    • 3.91 in(2)
    • 3.938 in(2)
    • 4.158 in(2)
    • 4.339 in(1)
    • 4.37 in(1)
    • 4.371 in(1)
    • 4.449 in(3)
    • 4.488 in(4)
    • 4.493 in(2)
    • 4.529 in(4)
    • 4.532 in(2)
    • 4.646 in(2)
    • 4.686 in(4)
    • 4.724 in(1)
    • 5.906 in(5)
    • 5.984 in(5)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 36.0 mm(3)
    • 42.0 mm(2)
    • 46.0 mm(3)
    • 47.0 mm(2)
    • 48.0 mm(2)
    • 50.0 mm(1)
    • 51.0 mm(1)
    • 52.0 mm(10)
    • 54.0 mm(1)
    • 56.0 mm(5)
    • 60.0 mm(34)
    • 62.0 mm(4)
    • 63.801 mm(2)
    • 64.0 mm(5)
    • 64.125 mm(1)
    • 65.0 mm(50)
    • 66.0 mm(5)
    • 67.0 mm(10)
    • 72.0 mm(2)
    • 74.0 mm(3)
    • 80.0 mm(6)
    • 83.301 mm(2)
    • 84.0 mm(4)
    • 88.0 mm(6)
    • 88.4 mm(1)
    • 94.0 mm(2)
    • 99.325 mm(2)
    • 100.0 mm(2)
    • 105.601 mm(2)
    • 110.2 mm(1)
    • 111.0 mm(1)
    • 111.025 mm(1)
    • 113.0 mm(3)
    • 114.0 mm(4)
    • 114.125 mm(2)
    • 115.0 mm(4)
    • 115.101 mm(2)
    • 118.0 mm(2)
    • 119.0 mm(4)
    • 120.0 mm(1)
    • 150.0 mm(5)
    • 152.0 mm(5)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (123)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • BORING BAR ADAPTER (4)
    • CARTRIDGE MOUNT (8)
    • END MILL ADAPTER (16)
    • ER COLLET CHUCK (14)
    • EXTENSION (5)
    • HYDRAULIC CHUCK (18)
    • HYDRAULIC CHUCK-HIGH TORQUE (4)
    • KM MODULAR ADAPTER (12)
    • MODULAR ADAPTER (6)
    • RC TAP CHUCK ADAPTER-T & C (4)
    • REDUCER (2)
    • SHELL MILL ADAPTER (12)
    • SHRINK FIT ADAPTER (16)
    • SQUARE SHANK ADAPTER (19)
    • WHISTLE DRIVE ADAPTER (1)
    • WHISTLE NOTCH ADAPTER (11)
    Clamp Style
    Clamp Style
    • D (97)
    • N (44)
    • P (65)
    • S (60)
    Cutting Width
    Cutting Width
    • 0.02 in(4)
    • 0.031 in(4)
    • 0.035 in(4)
    • 0.039 in(26)
    • 0.041 in(4)
    • 0.047 in(26)
    • 0.055 in(4)
    • 0.058 in(4)
    • 0.06 in(26)
    • 0.062 in(26)
    • 0.067 in(4)
    • 0.069 in(26)
    • 0.073 in(22)
    • 0.077 in(4)
    • 0.078 in(22)
    • 0.079 in(26)
    • 0.088 in(26)
    • 0.089 in(16)
    • 0.094 in(10)
    • 0.095 in(26)
    • 0.097 in(22)
    • 0.098 in(26)
    • 0.105 in(22)
    • 0.108 in(26)
    • 0.11 in(22)
    • 0.119 in(36)
    • 0.122 in(22)
    • 0.125 in(36)
    • 0.126 in(36)
    • 0.128 in(26)
    • 0.129 in(4)
    • 0.131 in(10)
    • 0.138 in(36)
    • 0.143 in(22)
    • 0.147 in(3)
    • 0.15 in(1)
    • 0.151 in(3)
    • 0.152 in(4)
    • 0.156 in(22)
    • 0.157 in(32)
    • 0.167 in(32)
    • 0.169 in(22)
    • 0.177 in(32)
    • 0.178 in(22)
    • 0.185 in(28)
    • 0.188 in(32)
    • 0.189 in(32)
    • 0.192 in(10)
    • 0.193 in(10)
    • 0.195 in(22)
    • 0.196 in(22)
    • 0.197 in(10)
    • 0.202 in(10)
    • 0.213 in(10)
    • 0.217 in(10)
    • 0.219 in(10)
    • 0.237 in(10)
    • 0.25 in(10)
    • 0.256 in(10)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(4)
    • 0.775 mm(4)
    • 0.8 mm(4)
    • 0.9 mm(4)
    • 1.0 mm(26)
    • 1.05 mm(4)
    • 1.201 mm(26)
    • 1.401 mm(4)
    • 1.475 mm(4)
    • 1.5 mm(26)
    • 1.576 mm(26)
    • 1.701 mm(4)
    • 1.75 mm(26)
    • 1.826 mm(22)
    • 1.951 mm(4)
    • 1.975 mm(22)
    • 2.0 mm(26)
    • 2.2 mm(26)
    • 2.225 mm(26)
    • 2.25 mm(16)
    • 2.375 mm(10)
    • 2.401 mm(26)
    • 2.475 mm(22)
    • 2.5 mm(26)
    • 2.676 mm(22)
    • 2.75 mm(26)
    • 2.801 mm(22)
    • 3.0 mm(36)
    • 3.1 mm(22)
    • 3.176 mm(36)
    • 3.2 mm(36)
    • 3.25 mm(26)
    • 3.276 mm(4)
    • 3.325 mm(10)
    • 3.5 mm(36)
    • 3.6 mm(22)
    • 3.725 mm(3)
    • 3.801 mm(1)
    • 3.825 mm(3)
    • 3.85 mm(4)
    • 3.95 mm(22)
    • 3.975 mm(10)
    • 4.0 mm(32)
    • 4.25 mm(32)
    • 4.3 mm(22)
    • 4.5 mm(32)
    • 4.525 mm(22)
    • 4.7 mm(28)
    • 4.775 mm(32)
    • 4.801 mm(32)
    • 4.875 mm(10)
    • 4.9 mm(10)
    • 4.95 mm(22)
    • 4.976 mm(22)
    • 5.0 mm(10)
    • 5.125 mm(10)
    • 5.4 mm(10)
    • 5.5 mm(10)
    • 5.575 mm(10)
    • 6.0 mm(10)
    • 6.351 mm(10)
    • 6.5 mm(10)
    Cutting Width Min받는 사람Cutting Width Max
    Front End Type
    Front End Type
    • CCS - PSC (13)
    • DLK - DUO-LOCK Modular Connect (9)
    • FDA - Milling Cutter Arbor (12)
    • KMT - KM Adapter (12)
    • MCS - Modular Cartridge System (8)
    • SWB - Tap Chuck Adapter (4)
    • SZK - Collet Taper (14)
    • VKT - Square Shank (19)
    • ZYL - Cylindrical Adapter (70)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (77)
    • D-DIAMOND/RHOMBIC 55 (57)
    • LT-TRIANGLE LAY DOWN THREAD 60 (26)
    • N/K-PARALLELOGRAM 55 (1)
    • R-ROUND (11)
    • S-SQUARE 90 (15)
    • TN-TOP NOTCH (36)
    • V-DIAMOND/RHOMBIC 35 (34)
    • W-TRIGON 80 (9)
    Front End Style
    Front End Style
    • CCS01 Std Design (13)
    • DLK01 DUO-LOCK (9)
    • FDA22 Transv Drive & SHCS (12)
    • KMT00 All KM, except 02,05,09 (12)
    • MCS01 Modular Deep Grooving (8)
    • SWB-01 WFL#...WES#(Bilz) (4)
    • SZK02 Collets 8 Degree Taper (14)
    • VKT01 Std Design (19)
    • ZYL01 Straight Shank (38)
    • ZYL13 2Deg-Whistle Notch (11)
    • ZYL14 Weldon+Whistle Notch (16)
    • ZYL22 Boring Bar Shank (4)
    • ZYL63 2Deg Surf w/Cyl.w/drive (1)
    Insert Size
    Insert Size
    • 2 (4)
    • 3 (22)
    • 4 (10)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.138 in(4)
    • 0.21 in(20)
    • 0.294 in(10)
    • 0.473 in(1)
    • 0.984 in(1)
    • 1.102 in(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 3.5 mm(4)
    • 5.325 mm(20)
    • 7.476 mm(10)
    • 12.0 mm(1)
    • 25.0 mm(1)
    • 28.0 mm(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Gage Length
    Gage Length
    • 2 in(2)
    • 0.906 in(4)
    • 0.984 in(7)
    • 1.024 in(1)
    • 1.102 in(4)
    • 1.181 in(2)
    • 1.339 in(1)
    • 1.379 in(1)
    • 1.496 in(1)
    • 1.575 in(3)
    • 1.693 in(2)
    • 1.772 in(2)
    • 1.795 in(1)
    • 1.929 in(2)
    • 1.969 in(3)
    • 2.165 in(1)
    • 2.185 in(2)
    • 2.25 in(2)
    • 2.362 in(11)
    • 2.38 in(1)
    • 2.5 in(2)
    • 2.559 in(11)
    • 2.677 in(1)
    • 2.717 in(1)
    • 2.757 in(7)
    • 2.953 in(5)
    • 3.031 in(1)
    • 3.15 in(33)
    • 3.346 in(9)
    • 3.465 in(1)
    • 3.5 in(1)
    • 3.543 in(11)
    • 3.74 in(5)
    • 3.75 in(1)
    • 3.938 in(9)
    • 4.134 in(1)
    • 4.724 in(1)
    • 4.803 in(1)
    • 5.513 in(2)
    • 6.102 in(2)
    • 7.559 in(1)
    Gage Length
    Gage Length
    • 80 mm(33)
    • 60 mm(11)
    • 65 mm(11)
    • 90 mm(11)
    • 100 mm(9)
    • 85 mm(9)
    • 25 mm(7)
    • 70 mm(7)
    • 75 mm(5)
    • 95 mm(5)
    • 23 mm(4)
    • 28 mm(4)
    • 40 mm(3)
    • 50 mm(3)
    • 140 mm(2)
    • 155 mm(2)
    • 30 mm(2)
    • 43 mm(2)
    • 45 mm(2)
    • 49 mm(2)
    • 105 mm(1)
    • 120 mm(1)
    • 122 mm(1)
    • 192 mm(1)
    • 26 mm(1)
    • 34 mm(1)
    • 35 mm(1)
    • 38 mm(1)
    • 55 mm(1)
    • 68 mm(1)
    • 69 mm(1)
    • 77 mm(1)
    • 88 mm(1)
    • 45.6 mm(1)
    • 50.801 mm(2)
    • 55.5 mm(2)
    • 57.151 mm(2)
    • 60.45 mm(1)
    • 63.5 mm(2)
    • 88.9 mm(1)
    • 95.25 mm(1)
    Front End Size
    Front End Size
    • 0.119 in(1)
    • 0.157 in(1)
    • 0.197 in(1)
    • 0.237 in(4)
    • 0.25 in(1)
    • 0.315 in(4)
    • 0.375 in(2)
    • 0.394 in(4)
    • 0.473 in(4)
    • 0.5 in(2)
    • 0.551 in(4)
    • 0.625 in(2)
    • 0.63 in(7)
    • 0.709 in(4)
    • 0.748 in(2)
    • 0.75 in(8)
    • 0.787 in(7)
    • 0.866 in(2)
    • 0.875 in(1)
    • 0.984 in(5)
    • 1.0 in(4)
    • 1.063 in(2)
    • 1.22 in(1)
    • 1.25 in(4)
    • 1.26 in(5)
    • 1.5 in(2)
    • 1.575 in(3)
    • 1.891 in(1)
    • 1.969 in(7)
    • 2.48 in(7)
    • 3.15 in(2)
    Front End Size Min받는 사람Front End Size Max
    Front End Size
    Front End Size
    • 3.0 mm(1)
    • 4.0 mm(1)
    • 5.0 mm(1)
    • 6.0 mm(4)
    • 6.351 mm(1)
    • 8.0 mm(4)
    • 9.525 mm(2)
    • 10.0 mm(4)
    • 12.0 mm(4)
    • 12.701 mm(2)
    • 14.0 mm(4)
    • 15.875 mm(2)
    • 16.0 mm(7)
    • 18.0 mm(4)
    • 19.0 mm(2)
    • 19.05 mm(8)
    • 20.0 mm(7)
    • 22.0 mm(2)
    • 22.225 mm(1)
    • 25.0 mm(5)
    • 25.401 mm(4)
    • 27.0 mm(2)
    • 31.0 mm(1)
    • 31.75 mm(4)
    • 32.0 mm(5)
    • 38.1 mm(2)
    • 40.0 mm(3)
    • 48.0 mm(1)
    • 50.0 mm(7)
    • 63.0 mm(7)
    • 80.0 mm(2)
    Front End Size Min받는 사람Front End Size Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (182)
    • B L (161)
    • C A (140)
    • C N (174)
    • D P (162)
    • H T (196)
    • H W (264)
    backEnd
    Connection Type
    Connection Type
    • TAPER SHANK (171)
    System Size
    System Size
    • PSC50 (82)
    • PSC63 (173)
    • PSC80 (6)
    • VDI40 (1)
    • VDI50 (3)
    Back-End Diameter
    Back-End Diameter
    • 40.0 mm(1)
    • 49.975 mm(1)
    • 50.0 mm(168)
    • 62.975 mm(1)
    • 63.0 mm(250)
    • 80.0 mm(6)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.575 in(1)
    • 1.968 in(1)
    • 1.969 in(168)
    • 2.479 in(1)
    • 2.48 in(250)
    • 3.15 in(6)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    PSC 63

    PSC 63

    View Categories
    PSC80

    PSC80

    PSC 50

    PSC 50

    View Categories
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk