환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Beyond Evolution

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (942)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(942)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(942)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(942)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(942)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(942)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(942)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(942)
    • M Stainless Steel (781)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(781)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(781)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(781)
    • K Cast Iron (942)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(942)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(942)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(942)
    • N Non-Ferrous Materials (810)
      • N1
        Wrought Aluminum (810)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(781)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (810)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (781)
      • N6
        Carbon, Graphite Composites, CFRP (781)
    • S High-Temp Alloys (810)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(810)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(810)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(810)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(810)
    • H Hardened Materials (673)
      • H1
        Hardened Materials 44-48 HRC(673)
      • H2
        Hardened Materials 48-55 HRC(673)
    1차 선택 선택
    • BR (7)
    • CN (72)
    • DE (70)
    • GB (43)
    • IN (21)
    • SG (48)
    • US (72)
    Applications
    Applications
    • Back BoringBack Boring (509)
    • BoringBoring (509)
    • Cut-OffCut-Off (681)
    • DrillingDrilling (1)
    • Face GroovingFace Grooving (939)
    • FacingFacing (509)
    • GroovingGrooving (926)
    • ID FacingID Facing (517)
    • ID GroovingID Grooving (509)
    • Multiple Direction CuttingMultiple Direction Cutting (96)
    • Plunge TurningPlunge Turning (404)
    • ProfilingProfiling (464)
    • TurningTurning (509)
    Cutting Length
    Cutting Length
    • 26.0 mm(1)
    • 32.0 mm(3)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 1.024 in(1)
    • 1.26 in(3)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (639)
    • Lightly Interrupted Cut (840)
    • Smooth Cut (971)
    • Varying Depth of Cut (840)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (462)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (16)
    • Toolholder (253)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (1)
    • 1.0 (778)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.881 in(36)
    • 2.037 in(32)
    • 2.111 in(32)
    • 2.195 in(50)
    • 2.431 in(24)
    • 2.584 in(1)
    • 2.668 in(18)
    • 4.5 in(20)
    • 4.921 in(20)
    • 5.463 in(2)
    • 5.508 in(6)
    • 5.906 in(93)
    • 5.915 in(2)
    • 5.961 in(6)
    • 6.0 in(116)
    • 6.25 in(2)
    • 6.694 in(20)
    • 6.703 in(2)
    • 7.0 in(4)
    • 7.875 in(8)
    • 9.843 in(4)
    • 11.811 in(4)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 47.75 mm(36)
    • 51.75 mm(32)
    • 53.625 mm(32)
    • 55.75 mm(50)
    • 61.75 mm(24)
    • 65.625 mm(1)
    • 67.75 mm(18)
    • 114.301 mm(20)
    • 125.0 mm(20)
    • 138.75 mm(2)
    • 139.9 mm(6)
    • 150.0 mm(93)
    • 150.25 mm(2)
    • 151.4 mm(6)
    • 152.4 mm(116)
    • 158.75 mm(2)
    • 170.0 mm(20)
    • 170.25 mm(2)
    • 177.8 mm(4)
    • 200.0 mm(8)
    • 250.0 mm(4)
    • 300.0 mm(4)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(323)
    • 0.012 in(211)
    • 0.016 in(574)
    • 0.031 in(430)
    • 0.039 in(7)
    • 0.041 in(13)
    • 0.046 in(11)
    • 0.047 in(64)
    • 0.06 in(136)
    • 0.061 in(143)
    • 0.063 in(140)
    • 0.065 in(141)
    • 0.079 in(111)
    • 0.081 in(118)
    • 0.094 in(115)
    • 0.096 in(117)
    • 0.098 in(126)
    • 0.1 in(133)
    • 0.119 in(93)
    • 0.12 in(100)
    • 0.125 in(99)
    • 0.128 in(95)
    • 0.156 in(17)
    • 0.157 in(12)
    • 0.158 in(15)
    • 0.159 in(19)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(323)
    • 0.301 mm(211)
    • 0.4 mm(574)
    • 0.8 mm(430)
    • 1.0 mm(7)
    • 1.05 mm(13)
    • 1.175 mm(11)
    • 1.201 mm(64)
    • 1.5 mm(136)
    • 1.55 mm(143)
    • 1.6 mm(140)
    • 1.651 mm(141)
    • 2.0 mm(111)
    • 2.051 mm(118)
    • 2.375 mm(115)
    • 2.45 mm(117)
    • 2.5 mm(126)
    • 2.551 mm(133)
    • 3.0 mm(93)
    • 3.051 mm(100)
    • 3.176 mm(99)
    • 3.25 mm(95)
    • 3.95 mm(17)
    • 4.0 mm(12)
    • 4.025 mm(15)
    • 4.05 mm(19)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(703)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(703)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (491)
    • KCK20B (497)
    • KCM35B (365)
    • KCP10B (520)
    • KCP25B (530)
    • KCU10 (568)
    • KCU10B (568)
    • KCU25 (570)
    • KCU25B (462)
    Hand Of Tool
    Hand Of Tool
    • L (135)
    • R (134)
    Wiper Insert
    Wiper Insert
    • N (778)
    F Dimension
    F Dimension
    • 12.75 mm(4)
    • 12.951 mm(4)
    • 16.125 mm(2)
    • 16.25 mm(2)
    • 19.201 mm(20)
    • 19.3 mm(2)
    • 20.175 mm(20)
    • 20.25 mm(2)
    • 25.175 mm(48)
    • 25.201 mm(41)
    • 25.55 mm(69)
    • 25.576 mm(23)
    • 31.901 mm(8)
    • 31.925 mm(8)
    • 32.15 mm(8)
    • 32.176 mm(8)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.502 in(4)
    • 0.51 in(4)
    • 0.635 in(2)
    • 0.64 in(2)
    • 0.756 in(20)
    • 0.76 in(2)
    • 0.794 in(20)
    • 0.797 in(2)
    • 0.991 in(48)
    • 0.992 in(41)
    • 1.006 in(69)
    • 1.008 in(23)
    • 1.256 in(8)
    • 1.258 in(8)
    • 1.266 in(8)
    • 1.268 in(8)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 26.0 mm(4)
    • 30.0 mm(8)
    • 33.0 mm(4)
    • 35.0 mm(8)
    • 40.0 mm(17)
    • 41.0 mm(4)
    • 50.0 mm(29)
    • 60.0 mm(52)
    • 75.0 mm(59)
    • 80.0 mm(4)
    • 100.0 mm(69)
    • 180.0 mm(72)
    • 250.0 mm(66)
    • 350.0 mm(66)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 1.024 in(4)
    • 1.181 in(8)
    • 1.299 in(4)
    • 1.379 in(8)
    • 1.575 in(17)
    • 1.614 in(4)
    • 1.969 in(29)
    • 2.362 in(52)
    • 2.953 in(59)
    • 3.15 in(4)
    • 3.938 in(69)
    • 7.087 in(72)
    • 9.843 in(66)
    • 13.781 in(66)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 1.181 in(4)
    • 1.379 in(8)
    • 1.575 in(8)
    • 1.655 in(4)
    • 1.969 in(21)
    • 2.362 in(31)
    • 2.953 in(50)
    • 3.938 in(59)
    • 7.087 in(73)
    • 9.843 in(68)
    • 13.781 in(66)
    • 39.331 in(70)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 30.0 mm(4)
    • 35.0 mm(8)
    • 40.0 mm(8)
    • 42.0 mm(4)
    • 50.0 mm(21)
    • 60.0 mm(31)
    • 75.0 mm(50)
    • 100.0 mm(59)
    • 180.0 mm(73)
    • 250.0 mm(68)
    • 350.0 mm(66)
    • 999.0 mm(70)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (269)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (236)
    Maximum Bore Depth
    Maximum Bore Depth
    • 3.938 in(4)
    • 4.0 in(4)
    • 5.0 in(2)
    • 5.039 in(2)
    • 6.0 in(2)
    • 6.299 in(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 100.0 mm(4)
    • 101.601 mm(4)
    • 127.0 mm(2)
    • 128.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (16)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • CARTRIDGE MOUNT (76)
    • SQUARE SHANK ADAPTER (20)
    Clamp Style
    Clamp Style
    • Y (298)
    Cutting Width
    Cutting Width
    • 0.063 in(10)
    • 0.079 in(11)
    • 0.084 in(24)
    • 0.094 in(10)
    • 0.095 in(14)
    • 0.098 in(14)
    • 0.119 in(144)
    • 0.123 in(164)
    • 0.125 in(160)
    • 0.13 in(163)
    • 0.157 in(119)
    • 0.161 in(132)
    • 0.162 in(140)
    • 0.187 in(133)
    • 0.188 in(107)
    • 0.192 in(138)
    • 0.197 in(133)
    • 0.202 in(155)
    • 0.237 in(101)
    • 0.241 in(120)
    • 0.25 in(118)
    • 0.255 in(110)
    • 0.276 in(93)
    • 0.281 in(94)
    • 0.289 in(89)
    • 0.312 in(24)
    • 0.315 in(20)
    • 0.317 in(24)
    • 0.32 in(39)
    • 0.375 in(6)
    • 0.394 in(4)
    • 0.399 in(10)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 1.6 mm(10)
    • 2.0 mm(11)
    • 2.125 mm(24)
    • 2.375 mm(10)
    • 2.401 mm(14)
    • 2.5 mm(14)
    • 3.0 mm(144)
    • 3.125 mm(164)
    • 3.176 mm(160)
    • 3.301 mm(163)
    • 4.0 mm(119)
    • 4.101 mm(132)
    • 4.125 mm(140)
    • 4.75 mm(133)
    • 4.775 mm(107)
    • 4.875 mm(138)
    • 5.0 mm(133)
    • 5.125 mm(155)
    • 6.0 mm(101)
    • 6.125 mm(120)
    • 6.351 mm(118)
    • 6.476 mm(110)
    • 7.0 mm(93)
    • 7.125 mm(94)
    • 7.325 mm(89)
    • 7.926 mm(24)
    • 8.0 mm(20)
    • 8.05 mm(24)
    • 8.125 mm(39)
    • 9.525 mm(6)
    • 10.0 mm(4)
    • 10.125 mm(10)
    Cutting Width Min받는 사람Cutting Width Max
    Front End Type
    Front End Type
    • MCS - Modular Cartridge System (76)
    • VKT - Square Shank (20)
    Insert Shape
    Insert Shape
    • PRISMATIC (972)
    Cartridge Size
    Cartridge Size
    • 50 (160)
    • 65 (33)
    Front End Style
    Front End Style
    • MCS01 Modular Deep Grooving (76)
    • VKT01 Std Design (20)
    Insert Size
    Insert Size
    • 2 (4)
    • 3 (76)
    • 4 (53)
    • 5 (72)
    • 6 (64)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.473 in(92)
    • 0.63 in(113)
    • 0.787 in(106)
    • 1.024 in(100)
    • 1.26 in(51)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 12.0 mm(92)
    • 16.0 mm(113)
    • 20.0 mm(106)
    • 26.0 mm(100)
    • 32.0 mm(51)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Gage Length
    Gage Length
    • 6 in(4)
    • 7 in(2)
    • 0.866 in(12)
    • 1.102 in(2)
    • 1.299 in(2)
    • 1.496 in(2)
    • 1.693 in(2)
    • 1.85 in(6)
    • 1.891 in(6)
    • 1.929 in(4)
    • 2.106 in(4)
    • 2.185 in(2)
    • 2.244 in(6)
    • 2.283 in(6)
    • 2.303 in(6)
    • 2.382 in(2)
    • 2.5 in(12)
    • 2.579 in(2)
    • 2.618 in(4)
    • 2.697 in(4)
    • 2.894 in(4)
    • 5.439 in(2)
    • 5.463 in(2)
    • 5.482 in(2)
    • 5.508 in(6)
    • 5.529 in(6)
    • 5.533 in(4)
    • 5.906 in(2)
    • 6.226 in(2)
    • 6.25 in(2)
    • 6.271 in(2)
    • 6.534 in(2)
    • 6.694 in(2)
    Gage Length
    Gage Length
    • 22 mm(12)
    • 47 mm(6)
    • 48 mm(6)
    • 57 mm(6)
    • 58 mm(6)
    • 49 mm(4)
    • 150 mm(2)
    • 170 mm(2)
    • 28 mm(2)
    • 33 mm(2)
    • 38 mm(2)
    • 43 mm(2)
    • 53.5 mm(4)
    • 55.5 mm(2)
    • 58.5 mm(6)
    • 60.5 mm(2)
    • 63.5 mm(12)
    • 65.5 mm(2)
    • 66.5 mm(4)
    • 68.5 mm(4)
    • 73.5 mm(4)
    • 138.15 mm(2)
    • 138.75 mm(2)
    • 139.25 mm(2)
    • 139.9 mm(6)
    • 140.4 mm(6)
    • 140.55 mm(4)
    • 152.4 mm(4)
    • 158.15 mm(2)
    • 158.75 mm(2)
    • 159.25 mm(2)
    • 165.951 mm(2)
    • 177.8 mm(2)
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 1.024 in(4)
    • 1.181 in(8)
    • 1.299 in(4)
    • 1.379 in(4)
    • 1.575 in(8)
    • 1.614 in(4)
    • 1.969 in(16)
    • 2.362 in(32)
    • 2.953 in(32)
    • 3.938 in(40)
    • 7.087 in(40)
    • 9.843 in(38)
    • 13.781 in(39)
    Minimum Groove Diameter Min받는 사람Minimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 26.0 mm(4)
    • 30.0 mm(8)
    • 33.0 mm(4)
    • 35.0 mm(4)
    • 40.0 mm(8)
    • 41.0 mm(4)
    • 50.0 mm(16)
    • 60.0 mm(32)
    • 75.0 mm(32)
    • 100.0 mm(40)
    • 180.0 mm(40)
    • 250.0 mm(38)
    • 350.0 mm(39)
    Minimum Groove Diameter Min받는 사람Minimum Groove Diameter Max
    Maximum Groove Diameter
    Maximum Groove Diameter
    • 30.0 mm(4)
    • 35.0 mm(8)
    • 40.0 mm(4)
    • 42.0 mm(4)
    • 50.0 mm(12)
    • 60.0 mm(18)
    • 75.0 mm(30)
    • 100.0 mm(32)
    • 180.0 mm(40)
    • 250.0 mm(40)
    • 350.0 mm(38)
    • 999.0 mm(39)
    Maximum Groove Diameter Min받는 사람Maximum Groove Diameter Max
    Maximum Groove Diameter
    Maximum Groove Diameter
    • 1.181 in(4)
    • 1.379 in(8)
    • 1.575 in(4)
    • 1.655 in(4)
    • 1.969 in(12)
    • 2.362 in(18)
    • 2.953 in(30)
    • 3.938 in(32)
    • 7.087 in(40)
    • 9.843 in(40)
    • 13.781 in(38)
    • 39.331 in(39)
    Maximum Groove Diameter Min받는 사람Maximum Groove Diameter Max
    insertGeometry
    Shape
    Shape
    • PRISMATIC (510)
    Insert Seat Size
    Insert Seat Size
    • 10 (20)
    • 1F (10)
    • 2 (53)
    • 3 (103)
    • 4 (102)
    • 5 (44)
    • 6 (102)
    • 8 (75)
    Cutting Tool Material
    Cutting Tool Material
    • H W (972)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (16)
    • SQUARE SHANK (253)
    System Size
    System Size
    • KM40TS (4)
    • KM4X63 (4)
    • KM50TS (8)
    • KM63TS (8)
    • KM63XMZ (8)
    • KM80ATC (8)
    • KM80TS (8)
    • PSC40 (4)
    • PSC50 (8)
    • PSC63 (8)
    • PSC80 (8)
    • VDI30 (10)
    • VDI40 (10)
    Back-End Diameter
    Back-End Diameter
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 30.0 mm(10)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(20)
    • 50.0 mm(16)
    • 63.0 mm(28)
    • 80.0 mm(24)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.181 in(10)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(20)
    • 1.969 in(16)
    • 2.48 in(28)
    • 3.15 in(24)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.75 in(20)
    • 0.787 in(20)
    • 0.984 in(89)
    • 1.0 in(92)
    • 1.25 in(16)
    • 1.26 in(16)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 19.05 mm(20)
    • 20.0 mm(20)
    • 25.0 mm(89)
    • 25.401 mm(92)
    • 31.75 mm(16)
    • 32.0 mm(16)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.75 in(20)
    • 0.787 in(20)
    • 0.984 in(89)
    • 1.0 in(92)
    • 1.25 in(16)
    • 1.26 in(16)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 19.05 mm(20)
    • 20.0 mm(20)
    • 25.0 mm(89)
    • 25.401 mm(92)
    • 31.75 mm(16)
    • 32.0 mm(16)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""

    Beyond Evolution 인서트

    (510)Beyond Evolution 인서트

    Beyond Evolution 모듈형 시스템

    (309)Beyond Evolution 모듈형 시스템

    Beyond Evolution 일체형 홀더

    (253)Beyond Evolution 일체형 홀더

    Beyond Evolution VDI 블록

    (20)Beyond Evolution VDI 블록

    Beyond Evolution 보링 바

    (16)Beyond Evolution 보링 바
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?